Mess SR 053 - Creation not possible (Mapping for product already exist..
There is an error ocurring when the CIF is executed, this message I can see in the transaction SMQ1, the error " SR 053 - Creation not possible (Mapping for <product> already exists <product> ", the product really exists in APO but I don't know why this error occur because in this case the material should be updated. Anyone know why this error occur ?? and how can I fix ??
When I try to execute only this material in CFM2 no errors occur.
Regards,
Edson Suzuki
We did faced a similar problem. The reason was the external material number was different in both cases.
ie the already existing record has the external material number padded with '0000' and the one coming doesn't have leading '0000'
If this suggestion helps you, please reward by points..
Shibu
Similar Messages
-
Document is in transfer for PO, creation not possible
Hi
We are using SRM 4.0 EC scenario. Recently we have been facing the subjected error 'Document is in transfer for PO, creation not possible' while making the confirmation in SRM. It is observed that this is happening mostly in case once we make GR and cancel and repost. Thru some other thread posted in forum, came to know taht we need to delete the entries in table "BBP_DOCUMENT_TAB" via FM ''BBP_DELETE_FROM_DOCUMENT_TAB''. I ran thei FM but found NO poitive results. Hope somebody can help me out. This error became very common in our production system
Thanks
KiranHi Kiran,
Please, use the report CLEAN_REQREQ_UP to clear the entry made for the GR in BBP_DOCUMENT_TAB. The problem comes because there is an entry for the GR in the table probably from the previous creation.
Regards
Saravanan.
Please award if useful -
GR Error: Document is in transfer for PO, Creation not possible
Hi Experts,
While posting a GR for PO, following error is being encountered,
'Document is in transfer for PO, Creation not possible'.
I checked the PR - PO. There are multiple GRs for the PO and all earlier GRs are posted successfully.
For posting a new GR this error is coming.
Any pointers?
Thanks in advance.
-DhananjayHi Kiran,
Please, use the report CLEAN_REQREQ_UP to clear the entry made for the GR in BBP_DOCUMENT_TAB. The problem comes because there is an entry for the GR in the table probably from the previous creation.
Regards
Saravanan.
Please award if useful -
Document is in transfer for purchase order.Creation not possible
Dear All,
We did partial confirmation in EBP and later when trying to do confiramtion for the remaining quantiy getting the message"document is in transfer for purchase order.Creation not possible"
We are taking this problem in production as well as in quality systems also.
What are possible reason and how to solve it.
kindly share your views.
Thank you.Hi yshu,
use tcode bd87 in SRM to check for failed confirmation IDOC (type MBGMCR).
The double click the status record to see the exact cause of the failure.
Rectify the error. Then try to execute the IDOC from BD87 tcode.
For a few errors you may not be able to execute the IDOC but to create a new confirmation in SRM. In such cases, follow the below procedure..
There should be an entry for the confirmation in the transfer table BBP_DOCUMENT_TAB in SRM. Display the details.
Then run FM "BBP_DELETE_FROM_DOCUMENT_TAB" to delete the entry from the doc tab table.
Then post a new confirmation in SRM.
There is also a FM in SRM using which you can change the status of thefailed IDOC from 51 to 68 or 31.
Rgds,
MJ -
Document in transfer for purchase order - creation not possible
Hi Experts,
we get this error when we do confirmation"'document in transfer for purchase order - creation not possible'"
any inputs are appreciated
Rg
samHi All,
We have resolved the above problem.
When user does confirmation ,if it sucessfully created then there will be no entry in BBP_Document_tab table.If it's in error in process and next time when user tries to do GR then he will encounter a pop up message "Document in transfer for PO, creation not possible".
So we need to delete the entries from table BBP_DOCUMENT_TAB using FM BBP_DELETE_FROM_DOCUMENT_TAB.
Then check again in BBP_DOCUMENT_TAB now there will be noentry there...so now user can do the confirmation from SRM,he will not encounter this error now.
Thanks to all the ppl who has replied
sameer -
Hi - Recently I put the latest update on my LT15i (4.1.B.0.587), after this I rooted the phone, and everything seemed okay. But since then I keep getting an error message with an offer to download the 4.1.B.0.587 update and the note: "installation not possible" (because it's already there). The news line on top shows a red exclamation mark all the time. It seems to me that it is due to this error that I cannot partition my SD card. Does anybody have an idea how to fix that? Thanks much in advance, and happy holidays - nerissa
Moved thread to Android development.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
Creation of Import Map for Business Partners
Hello Guru's,
Can anyone guide me how to create import maps for Business Partners please , we use Text files.
Thanks in advance
Regards
SrihariHi srihari ,
Kindly refer to the below links for some further help in this area:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_mdm/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31303335373733%7d
/people/satyajit.chakraborty/blog/2009/01/15/central-mdm-business-partner-creation-scenario-with-galaxy-bpm--part-i
/people/satyajit.chakraborty/blog/2009/01/16/central-mdm-business-partner-creation-scenario-with-galaxy-bpm--part-ii
Hope It Helped
Thanks & Regards
Simona Pinto -
PSE 9 and 5 will not import - says the file already exists in the catalog !
I've already wasted 2 days looking for answers to this. When someone buys this program, at least half of the price is paying for the database in the Organizer - yet even John Ellis himself, who seems to know more than anyone about it, has gone to Lightroom. This is bad coding!!!
Upgraded from 5 to 9. If you read my previous posts, this took 2 days too, and phone help from a tech, because it would not install in my XP computer. It did upgrade the Organizer from 5, although many of the symbols are unusable and don't work to help me identify my tags. However, now I see that neither 5 nor 9 is able to look at a file and display thumbnails that are in it.
I move files around a lot for my business. Any half-way good database should be able to find the missing files, and also add any new images. Say I have 10 images in file A, then add 2 more to make 12. It can't see the added images! Says can't import, the file already exists in the catalog.
I tried: updating thumbnails, recover, repair, in both 5 and 9 - nothing works. to import the images that I can SEE in these folders! I read here that it will not import files if the same name is somewhere else. That alone is a problem. But I think it's more than that: even if the file used to be in another folder, folder B, it won't recognize that it's in folder A now!
Since PSE9 uses sql db, shouldn't that be better than 5 and be able to do simple tasks like this?
Any advice or similar experiences eagerly welcomed.Thank you for replying, dj paiqe.
Do you mean the first little section that says photos may not be displaying? Yes, those just reveal hidden photos and are very basic. I did them.
I guess we disagree about databases and what they are designed to do, or maybe I didn't explain this well.
I did not move the images outside of the catalog: I move them to various folders, all already imported WITHIN the catalog, as I send them to various editors. (these are all drawings, not photos, and I do this professionally, so it needs to work).
Folder A and Folder B and Folder C have already been imported into the catalog. So if I move 2 images from folder B into folder A, the Organizer is simply lost, says image already exists, and everything is totally screwed up, as the image is no longer in folder B, and it can't find it in folder A!!! The problem is, unless I memorize the image name, say Image 9, I can't tell it to reconnect, as there is no longer an image in front of me! So there are 2 images, without names, now nowhere to be found. Inefficient, to say the least.
I've never tried Lightroom or Filemaker, but I cannot believe that they would lose data like this. I think it's the Folder coding that's not working in PSE, and I wanted this to work so badly!!!!!
I am willing to do it the PSE way, since you now have captions, keywords, etc, and it is a very powerful database, when it works. I understand that one is supposed to move images within the Organizer, obviously. But now many images are disconnected. I could start all over importing, but is there any way to do that without losing tags and categories? -
Confirmation Creation not possible - Document is in Transfer for PO.
Hi Gurus,
Scenario :Extended classic
Server :SRM_SERVER 550 -SAPKIBKT05
We are not able to create subsiquent Confirmations for a PO, as the entries in table BBP_DOCUMENT_TAB, is not being cleaned by CLEAN_REQREQ_UP, even after the IDOC has been posted successfully in the back end.
the IM ( Conformation) entries are
not being cleaned by the CLEAN_REQREQ_UP batch job which is running succesfully.
I went though the OSS available and there are some old notes which talks of this issue. OSS 171113, 187802..but no soution recommended.
I also came across this note 644963 which talks of a report to delete the IM entries in BBP_DOCUMENT_TAB (Report :ZZ_CLEAN_BBP_DOCUMENT_TAB).
But this report has not be provided by SAP in patch level SRM_SERVER 550 -SAPKIBKT05
Has any one resolved this issue..please help us out.
Please note that deleting the (IM) entry related to this PO from table BBP
DOCUMENTTAB, solves the problem.
Best Regards
PrashanthHi Ramakrishna,
Thanks for the responce.
Running CLEAN_REQREQ_UP manually and resetting the job solved the problem.
The report that I mentioned is in a related note of 644963
Best Regards
Prashanth -
TRM task creation not possible
Hi All,
I am trying to make configuration for TRM. I have made all assighment in TRM & wm assighnment & checked for consitancy .
I have made the contol data customisation,
In this , I am not getting why in defining Manditory Rout the "Via Zone" is required to mention.
So for this i have made the putaway in 2 step.But even though Task is not getting created.
But no task is getting creating after creation of TO & executing the Task creation i TRM monitor.
or
Pls send me the link for the configuration of TRM.
Edited by: dev .. on Jul 29, 2009 7:33 AMHi Vinod ,
Thanks for Reply.
Its not showing TO in TRM Monitor. With every creation of new TO its adding following error,
In T code LTRMS : I RIGHT CLICK ON SITE & selected Application Log,.
No relevant requests for global scheduling were found
Technical Data
Message type__________ W (Warning)
Message class_________ LTRQ (Request messages)
Message number________ 015
Message Attributes
Problem class_________ 3 (medium)
I have gone through one of your post showing : Check the entries in the table(3tables) ....I have checked.... its showing values.
Few thing I doubt about configution ,
In Log Monitor LTRL If i click on ALERT tab Shows error,
"Alert Monitor cannot start: root alert class is not defined"
Where to define this ?
Is this things matters at the time of Task creation?
Edited by: dev .. on Aug 10, 2009 8:03 AM -
Delivery creation not possible
Hi,
I'm creating a delivery but system doesn't allow it, how can I solve the above?:
No schedule lines due for delivery up to the selected date
Message no. VL248
Diagnosis
There are no schedule lines due for the given order item up to the date
chosen.
System response
The system does not create a delivery item for this order item.
Procedure
o Check whether the order item to be delivered contains confirmed
schedule lines.
If this is the case, set the selection date further into the future if
you still want to create a delivery for this item.Hi
It is normally due to wrong "Selection date" entered by the user in the "Create Outbound delivery "(VL01N) screen.
Go to the Sales order,select the item > go to item details > schedule line .
In this screen, see that the schedule line must have been confirmed.
In this screen , click on the "Shipping" tab below, it will show you the details of scheduling dates.
Note down the "Material availability date" and "Transportation palnning date".
The earlier of this two date must be used as "Selection date".
Suppose, Material availability date : 28/05/2009 and Tr.planning date : 29/05/2009.
Then, 28/05/2009 should be used as Selection date while creating the Delivery (VL01N).
You can use a date after 28th june but any date earlier than 28th if you are using as Selection date then you will have this error.
Normally , when creating delivery(VL01N), system takes to-days date as Selection date which you need to change as above accordingly or else you will get error. -
SAP MDM Port Creation not Possible
Hi,
I am not able to create MDM Inbound Port for my Repository.
The problem is I am not getting the XML Format is coming as Deactivated.
Regards
Kaushik BanerjeeHi Kaushik ,
To import a XML source file in to MDM from a Remote sytem using the port:
- Create an XML schema which will define the structure of the incoming XML file .and upload this xml schema under the XML schema table in mdm console under teh Admin node
- After this create the port in MDM with type as inbound.
- Select the the XML Format for importing in the format property and the XML schema which you have uploaded in console.
- Make the processing type as Manual if you are going for manual importing or else change it to automatic and configure the MDIs.ini file accordingly.
Refer the use of XML schema table in Console in the below link:
http://help.sap.com/saphelp_mdm550/helpdata/en/8e/9f9c427055c66ae10000000a155106/frameset.htm
If you are importing a standard XML file from the ERP system you will have to acc use the std XML like Matmas05 for a Material record frm R/3 or ECC else if you are importing a test data which corresponds to the MDM repository structure you can generate the XSD using Xomlite software and the exported schema from MDM rep(rep->rt clik->export schema)
Hope It Helped,
Thanks & Regards
Simona Pinto -
Maintenance Cycle creation not possible
Hello Developers,
(Solman 4.0 ChaRM)
I'm running into an issue concerning our maintenance project. I created a maintenance project, assigned systems and users to it, created an IMG, saved everything, but if I try to create a maintenance cycle via "/n/tmwflow/cmsconf", there is no project shown to choose. No project to choose = no maintenance cycle to assign.
As the system administrator insisted to create the RFCs and users manually, there might be a cause in that area, but I'm not sure.
Also if I run the consistency check in project configuration it says that the logical component "solution manager" is not used in my maintenance project, but if I run the same check in TA SMSY, it shows its usage.
I'm stuck and asking kindly for advise.
Any help appreciated.
Yours,
Rudolf WeisHello,
I assume you use solman 4. Let your system administrator perform ALL the steps in SAP Solman IMG --> SAP Solman --> Scenario-Specific Settings --> Change Request Management --> Standard Configuration --> Transport Management System; in the IMG otherwise it won't work.
Check the logical component (which I assume to be correct since you created a IMG project in the target system).
use the /TMWFLOW/Maintinst to check some settings as well
good luck -
Input query creation not possible
Hi experts,
I need to create an input query with at least one input ready caracteristic. I created the write access cube, and the aggregation level with RSPLAN, but when i create a new query based on this infoprovider i always have the planning tab 'Start query in change mode' in gray.
Is there any extra parameters needed in order to create the input query ?
could it be a server customizing problem ?
regards
RaedHi Marcel,
Thanks for ur repost; i will try to test it and see if it could help.
Actually what i need is simply to have a text cell where the user could insert his comments. This cell is technically 'free', it is only a part of the cube and have no real object-relations (a basic char infoobject).
Use Example, Cube shows ratios A and B for a product; the field 'comment' is what i need and it will be used in input by the user to say if the result is ok for him :
product ratioA ratioB comment
aaa 100 120 not ok
bbb 50 50 ok
What u propose might work but it's not in direct input like we can do with KF.
I'll try it and be back to give results
Regards
Raed -
SSCRFIELD : ONLI : Variant creation not possible
Hi all,
I have Selection Screen with pushbutton. And i have the User Command ONLI assigned to the Push Button. Since this allows me to reach Start of Selection.
At the Selection Screen Event, I am Capturing the ONLI when the User presses the Push Button and preforming some task.
The program works fine and well.
Problem:
When I am trying to create the VARIANT for the Selection, SAP throws me out of the Transaction.
My Code:
In the Selection Screen Event, I have a CASE stmt that does:
1. When ucomm = ONLI
I am doing the required task
2. When ucomm = others
I am leaving the program
When the Ucomm is SPOS( U get this ucomm, When u press SAVE), I am obviously out of Transaction.
But i have to create a VARIANT.
How do i fullfill this requirement????
Thanks
Kam
Message was edited by: KamRich,
Here is the part of Code:
selection-screen begin of block blk0 with frame.
Create Inspection Lot Button
selection-screen pushbutton 5(28) crteIns user-command ONLI.
selection-screen skip.
selection-screen begin of block blk3 with frame.
selection-screen begin of line.
selection-screen comment 2(18) text-000 for field pMatnr.
Material Number
parameters pMatnr type qals-matnr obligatory.
selection-screen comment 45(15) text-001 for field pDocNu.
Docket Number
parameters pDocNu(10) type c. "qals-ktextlos.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 2(18) text-002 for field pKunnr.
Customer(Bill To Party)
parameters pKunnr type qals-kunnr. "obligatory.
selection-screen comment 45(15) text-003 for field pWerk.
Plant(Accepting Office)
parameters pWerk type qals-werk obligatory.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 2(18) text-004 for field pInsDate.
Inspection Date
parameters pInsDate type sy-datum default sy-datum Obligatory.
selection-screen end of line.
selection-screen end of block blk3.
selection-screen skip.
selection-screen begin of block blk1 with frame title text-005.
Sampling/ Non-Sampling
parameters: pSamp radiobutton group grp0 default 'X',
pNonS radiobutton group grp0.
selection-screen end of block blk1.
selection-screen skip.
selection-screen begin of block blk2 with frame title text-006.
Create Inspection Lot/Result Recordings
parameters: pCreat radiobutton group grp1,
pResult radiobutton group grp1 default 'X'.
selection-screen end of block blk2.
selection-screen end of block blk0.
at selection-screen .
case sscrfields-ucomm.
when CONLI or space.
if sscrfields-ucomm is initial.
message W007.
endif.
Clear the Data Structure
clear : iInsType[],iInsPlan[],bdcdata[],iMessage[].
clear : vKunnr,bdcdata.
Check for the Valid Material
select single * from mara where matnr = pMatnr.
if sy-subrc ne 0.
message E009 with pMatnr.
endif.
Check for Valid Plant
select single * from t001w where werks = pWerk.
if sy-subrc ne 0.
message E010 with pWerk.
endif.
Check the Business Rule --> 1 Inspection Type : 1 Material
perform CheckBusinessRule1.
Check the Business Rule --> 2 Inspection Plan : 1 Material
perform checkBusinessRule2.
sscrfields-ucomm = 'ONLI'.
when others.
leave program.
endcase.
at selection-screen on radiobutton group grp0.
When Enter
if sscrfields-ucomm is initial.
message W007.
leave to screen 1000.
endif.
When Sampling is Clicked
if pSamp eq CX.
if pKunnr is initial.
message S005.
leave to screen 1000.
endif.
endif.
When Non Sampling is Clicked
if pNons eq CX.
if pKunnr is not initial.
message S006.
endif.
Thanks
Kam
Maybe you are looking for
-
Error while doing outbound delivery against Purchase Order
hello i m getting error while doing Outbound delivery for purchase order as follows EKPO-SOBKZ=E; EKPO-UMSOK=_; EKPO-KZBWS<>_ EKPO-KZVBR<>E (Note 305582) not supported (check your entry) Message no. M7146, i m not getting wht will be the reason, Rega
-
How can I convert a Pages document to a jpeg file?
I need to convert a design I created in Pages into either a jpeg file or creat an "object" out of the design. I can't figure out how to do either one. Thanks for any help you can offer!
-
Hi there, I got a BB 9320, then replaced it through the vendor for this same issue but it is still occuring. When using my phone, fully charged or not, the screen will go black and LED light is off for a 3-30 seconds mid task and the device becomes
-
Server name changed but old server name reflecting
Hi Experts, Issue is In the SQL server name is changed. When the user is logging on SAP old server name is appearing and in SAP 8.8 there is no option of change like in SAP 2005B and 2007B so no database is appearing on screen. What should be done i
-
Help with Subscriber Services Reset
What are Subscriber Services on iPad? and where would I find the 26 digit Authentication Key?