Mess. Type ET01: No labeling material group is assigned to material

Dear Gurus,
I want to print message type ET01 but when I try the system give me following message: "No labeling material group is assigned to material "
What do I have to do to make my material group "labeling"?
Waiting for your comments,
Warm regards,
Fuffo

Hi Fuffo,
I am getting the same error when I am trying to print my material id labels.
The error reads:
No labeling material group is assigned to material &1
Message no. WJ024
Is there something missing in the material master ? I have had a good look at the config (a couple of times) and the master data and am not able to make out what is it that I am missing.
Your input will be very helpful.
Thank you in advance.
Regards,
Pardeep.

Similar Messages

  • Change material group for an existing material

    Hi all,
    What is the steps to change a material group for an existing material?
    Is there any impact on the reports if I were to change the material group of an existing material?
    Thanks and regards,
    JT

    Yes, You can change in MM02 and also while changing you will get the folloeing Warning message..
    You are changing material group, but material already used by purchasing
         Message no. M3531
    Procedure
         When changing the material group of a material that is already being
         used by the purchasing department, you should note that:
         o   The purchasing statistics show how much of a material group has
             already been ordered. Unitl the change is made, the material is
             managed under the old material group and therefore the old material
             group statistics are updated. From the moment the change is made,
             the new material group's statistics are updated.
         o   Some purchase orders may derive from contracts with item categories
             referring to material groups. If this is the case, the material
             cannot be used after the change has been made.
         o   Every purchase requisition is allocated to a release strategy that
             can depend on the material group. A new release strategy may apply
             to a new material group. Purchase requisitions that were created
             before the change are subject to the old strategy; purchase
             requisitions that were created after the change are subject to the
             new strategy.

  • Material group & Account Assignment Category

    All,
    Whether we can make Material group and Accout assignment link in PR.?
    Suppose I am creating a PR and selecting a Account Assignment , only specific material groups I shoulb able to select , whether I can make that settings ?
    Kindly advise the best practices .
    regards

    Arif ,
    If I have selected a account assignment ,(for eg 'A') , in PR , then whether I can restrict the materiaL Groups , in such a way that , material groups which should be used for Asset only can be selected in PR ?
    Suppose I am having material groups A1, A2, A3, for asset .
    And M1,M2,M3 for Misc Non Stock .
    Then suppose if I am creating a PR with account assignment 'A' , then only I should be able to select A1 or A2 or A3 .
    If I am selecting M1,M2,M3 , then it shud give some error .
    This is possible ?
    Pls advise.
    regards

  • How to addthe field 'external material group' in MM60 from material master

    Hi
    In MM60, I need to include the field 'external material group' from material master
    How can I do this?
    Is there any other report that gives me this information with material code?
    please help
    Regards,
    shetty

    >
    shetty123s wrote:
    > Hi
    >
    > In MM60, I need to include the field 'external material group' from material master
    >
    > How can I do this?
    >
    > Is there any other report that gives me this information with material code?
    >
    > please help
    >
    > Regards,
    > shetty
    Not possible in MM60.
    Develop a report using table MARA with field EXTWG

  • Error in WRCR when trying to change material group of an article/material

    We are using SAP 4.6c Retail.
    I'm trying to change a material group via transaction WRCR and the following message is displayed
    W7018 Error Checking valuation at retail for valuation area 2001.
    I've been looking every where I can think of, but I can't find where valuation area is linked to either the material nor the old and new material group?
    It has almost has to be a customizing setting

    Hi,
    Pls check this link
    https://support.office.com/en-us/article/Troubleshoot-workflow-errors-8fcf47e5-a410-4714-880b-2611b18a56ce#bm6
    <section class="ocpSection" style="color:#363636;font-family:'Segoe UI', 'Segoe UI Web Regular', 'Segoe UI Symbol', 'Helvetica Neue', 'BBAlpha Sans', 'S60 Sans', Arial, sans-serif;font-size:10px;line-height:normal;">
    Cause
    One or more actions used in the workflow reference assemblies are not listed in the safe list in the web.config file.
    One or more actions used in the workflow reference assemblies are listed as unsafe in the safe list in the web.config file.
    </section><section class="ocpSection" style="color:#363636;font-family:'Segoe UI', 'Segoe UI Web Regular', 'Segoe UI Symbol', 'Helvetica Neue', 'BBAlpha Sans', 'S60 Sans', Arial, sans-serif;font-size:10px;line-height:normal;">
    </section>
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • Material group in PO

    Dear frinds,
    When we creat PO we have to assign  Material number as well as material group, though the material group is assigned to material in Material master, please explain me why system dos't  pick pruchase group from MMR,  Same in the case of  Purchase organization, purchase group & vendor

    Dear ,
      In a compnamy code have 2 or more that 2 plant & purchase organisation simillarly pugchase group also But we can purchase  the same material means material is same but vary only purchase organisation ,pugchase group  so we have to put it manually.
    Amin

  • Material Groups of specific Doc types

    Hi, is it possible to default certain material groups in a specific document type?
    Thanks so much.. Appreciate your help.
    Thanks,
    Paula

    Hi,
    For Service PO,  you can set default material group in item level in ML91.
    For material ( stock or no-stock)PO, The material group  will be from material master.
    Regards,
    Biju K
    Edited by: Bijay Kumar Barik on Aug 26, 2009 10:05 AM

  • Both material groups and material types in search while creating SC

    Hi Guys,
    While creating a shopping cart ,when we are searching for materials that have been replicated in SRM we can search the material based on various parameters like Product ID ,Category ID etc.In SRM the Category ID is normally the material group.Now we want to search the material based on both,material group as well as material type.But i can have only one of these as my category.2 hierarchies R3MATCLASS and R3PRODSTYP exist in the system.But i do i make it work so that i can see both the material type as well as material group while selecting materials to shop.Is it possible??
    Thanks in advance.
    Regards,
    Pawan

    Hi,
    What do you want to see exactly in the Selection screen fro the Product search???In the Std screen,you already have the field called PRODUCT TYPE where you can enter '01'(hierarchy) and  '02'(Services).
    But if you want the field HIERARCHY in the selection screen,then you need to modify the Std search help exit(BBP_F4IF_SHLP_EXIT_PRODUCT_GEN) attached to the Std Product search help(BBPH_PRODUCT)  for  the SHOP tarscn
    You will need to create a Z search help exit(Z FM) and attach that to the Std Product search help given above.In the Z exit,you need to write the logic to display the reqd fields in the Selection screen.
    BR,
    Disha.
    Pls reward points for useful answers.

  • Assign Source of supply is not working for contract with material group

    Dear Experts,
    I have searched all the threads and gone through before posting my query. So i would ask moderators to go through the thread properly before rejecting this.
    We have value contracts with respect to a particular material group without material and with item category W in the contract item, Please note that for the materials with this material group, the source determination is not set and source list is also not maintained.
    When we create PR for the material with this contract, and when we click on assign source of supply contracts used to get popped up, but recently from few days, when we click on assign source of supply we are getting an error " no source found for this item ".
    Can anybody help on this.
    Regards

    @ Biju,
    As mentioned earlier, we are not creating PR with reference to contract.
    first we are creating contract with item category W (material group), without material and plant details.
    we create PR with or without material with account assignment K and with the material group in the transaction ME51N, and after inputting all the fields, we click on assign source of supply, it was proposing the existing contracts with respect to material group earlier, but it is not happening for particular material group(it is working for all other material groups)
    Hope it is clear.
    @ Dev Patra,
    we are using DIEN-Service material types and we assign that particular material group to only service material type.
    we have not ticked, source list in the material master, we donot have any source list for the materials under that material group.( please check the note 457110- question number 14.)
    Regards

  • Free good item proposal by considering material group

    Hi,
    I have some requirement to set up free goods by material group.
    For example:
    Material 1 - Drink 1  1500 ml. 
    Material 2 - Drink 2  1500 ml.
    Material 3 - Drink 3  1500 ml.
    If customer buy either Material 1 or Material 2 or Material 3 10 Each, they will received free goods 1 Each. How can I do this?
    As I have maintain customized key combination for free good condition record material group wise  i.e. in "NA00" and maintained condition record  for free goods master by material group but in sales order entry, system will consider free goods by Material Code not Material Group.
    Like the above scenario, is it possible that a sales order of
    Material A1 - 3 pieces
    Material A2- 5 pieces
    Material A3- 2 pieces
    will propose me a free goods item for 1 piece since the qty sums up to 10.
    Can the above requirement be configured in SAP??
    Please help with your valuable inputs and suggestions in std SAP.
    Regards,
    Saba Faruqi
    SD consultant

    Maintain your entries in " Determine Item Category For Free Goods Item"
    For the combination of Order Type-ItemCatgrp(ERLA)-Usage(Free)-Item Category(Tan)
    Lets see if it works for you.

  • PO release strategy based on Material Group (CEKKO - MAKTL)

    Hi Experts,
    I have configure the Rel strategy based CEKKO-MATKL (material group) for purchase order, but when i raise the PO Rel strategy is not affecting, Can any body tell me why.
    Regards,
    Kumar

    You can set Release strategy based on Material group & other Line item specific fields..
    You better follow a suitable and hinder less process..
    For PR use Material group & Account Assignment based Release process..
    then for PO use a Release Process based on Header level fields like Doc type, Amount, pur Group etc..
    So that the approved PR line can be converted into PR and then the PO also subjected to Release before sending it to External Vendor..
    Even if you want you can make that the PO can not be created without referencing PR for SOme users or All users..
    based on your business requirement..

  • Make field in Material master mandatory based on the material group

    Hello all,
    I need to make the field "post to inspection flag" mandatory based on the material group while creating the Material master.
    I found options for making the field mandatory based on Material type,Industry sector and plant NOT based on the material group.
    Could anyone please provide suggestions on setting up the field as mandatory based on material group while creating material master
    Thanks,
    Sre

    Hi Sre,
    You can make Material Group field as Mandatory while Creating Material Master.
    SPRO>Log General>Material Master>Field Selection>Maintain Field Selection for Data Screens
    Select Screen # 48
    In the Field selection (Field Ref.) of (MARA - MAKTL) screen , Change the settings from Optional to Required Entry for T Codes MM01, MM02 or you can select the Material Type ;
    Please note this  by choosing this selection the fields of Profit Center and  Division will also become Mandatory.
    Hope this helps,
    Best regards
    Amit Bakshi

  • How can i restrict user through material group

    Dear Guru's
    We have two business process CDMA and GSM
    Two purchase organisations, different document types and  different material groups
    our user  is procuring a materials for CDMA using GSM materials codes.
    How can i restrict him.if he selects GSM purchase organisation he should procure only for GSM using GSM materials codes.
    IS it possible to restrict  through material groups
    Regards
    subhash

    Hi Ha Tran,
    Thanks for your suggestion.
    But the problem is that we have two business CDMA and GSM business.
    The enitity and reporting will be in the same company code.
    So we came up with two purchasing organisation because the first purchase organisation was already assigned to company code.
    and the business want different material groups for difeerent business.
    Ex: one material   100000000  DESC : Switching  with material group  NWTR
    the same material  with different number 1000000001 Desc: Switching  material group : GNWTR
    Now the user while  creating purchase order for GSM ,he is using CDMA material.
    I want to restict the users that if he selects document type and purchasing organisation of GSM. System should allow only GSM materials.
    Regards
    Subhash

  • Material group in baisc data

    Hi all
    We have  define following nomenculture  for component & analysis thro' LIS for purchase side.
    part numbet(material code ) =Aluminium Sheet 2.75mm
    Material type : spare part
    material group : Component
    Material group1 : metal sheet
    Material group 2 : hot roll
    material group3 : sheet tickness below 3MM
    How to configure in SAP for MM data at basic data1 or 2 level.
    We used material group 1 ....4 in sales view for sales analysis.

    hey sachin is very simple to control this in material master config for mtl type spare parts first u have to defin a class.
    also have to maintian class type and have to define a chactersitic like.....eg  sheet will be u r class ....
    for this class u have to attached charactirstic set in sheet metal used ....../ thickness of sheet metal.../ quality of sheetmetal
    Regards,
    Kaustubh

  • Material groups configuration and assingment?

    hii
    I have created new company code and plant in IDES.
    Now i wanted to create material master, but its asking for material groups ?
    How i can create and assign the same to my company code and plant , ??
    Thanks

    >
    MM group wrote:
    > hii
    >
    > I have created new company code and plant in IDES.
    >
    > Now i wanted to create material master, but its asking for material groups ?
    >
    > How i can create and assign the same to my company code and plant , ??
    >
    > Thanks
    When creating material master, it asks for material types not material groups, material types are already configured in IDES. if you want to create new material types, we can help you out. material groups are entered inside material master. If you want to create new material groups also, we can guide you there.

Maybe you are looking for