Message 02648: "Unable to determine a calculation squema"

Hello everyone,
Does anyone of you heard about Message 02648: "Unable to determine a calculation squema"?
It appears when creating a PO referred to a Preq via TX-ME21, but it does not appear when doing it via TX-ME57.
I would reallly appreciate any info relating this issue.
Thank you very much in advanced,
Víctor Liedo

the message number is 06 248.
a calculation schema is assigned to a schema group, the schema group is entered in the vendor master.
alternative a calculation schema can be assigned to a purchasing org.
Check first the vendor master in purchasing data view whether the schema group was entered properly.
If that is okay, then check in customizing whether the assignments have been made properly.

Similar Messages

Unable to determine a calculation schema

Hi ALL,
I am getting warning while creating RFQ:-
Unable to determine a calculation schema
Message no. 06248
please tell me why this warning massage is coming,and how to correct this so that it wont show next time while i do business to same vendor.
With Regards,
Siddharth Shanker

Hi,
In the Materials Management area, a calculation schema - a framework of steps used to calculate costs, prices and taxes etc.
pls chk whether calculation schema is defined thru following path
IMG>>Materials Management >>>Purchasing >>>Conditions>>Define Price Determination Process>>Define Calculation Schema
Br,
Tushar Patankar

Unable to determine currency

Hi all,
I m getting an error when choosing Income tax infotype. Error message is Unable to determine currency. Pls tell me how to resolve it!
Thank you!
Quanglv

These are some screenshots
http://i358.photobucket.com/albums/oo30/vquang124/OE00_1.jpg
http://i358.photobucket.com/albums/oo30/vquang124/OE00_2.jpg
http://i358.photobucket.com/albums/oo30/vquang124/OE00_3.jpg

Receiving error message: "Firefox is unable to determine if there is an update available".

I am running Firefox 31.0 on Mac OS X 10.6.8. I have it set to automatically check for updates, but not to automatically install them. Lately, I keep getting the error message "Update Failed" & "Firefox is unable to determine if there is an update available". But when I check manually, I get the message "Firefox is up-to-date". Any ideas on why it can no longer determine its update status?

Sometimes, the situation with complicated programs is;
Updating is fine, but sometimes the coding goes Gaa-Gaa. if
its update on update on update''' . . . . . .'''
So, every once in a while, instead of doing an update,
download the full installer. This should clean out the Gaa-Gaa.
If not, save the installer somewhere, remove the old program,
then use the installer.
Happy Computing.

Unable to determine the number of SMSs generated by the message

In JES5, I tested the SMS logging with two options; standard and xml.
In both cases, I was unable to determine the number of SMSs generated by the message.
However, such information can be found in the debug log;
If i enable the debug logging, the desired information is available:
10:15:41.59: 2-fragment(2250): The message will be sent as 4 SMS messages
Nevertheless, Debug logging cannot be enabled all the time since it is pretty verbose.
It was said that XML based logging released in JES5 will include the number of messages in the mail.log_current.
But i dont find such information in it.
Would anyone please tell me if this is applicable?
what parameters should be changed or modified in order to make such
information appear in the mail.log file?
Thanks!

I've not examined the doc, but I suspect that at least one of the option logging settings will do that for you. Please do have a look at the "channel option files" and the logging levels.

SQL Server Agent running SSIS package fails Unable to determine if the owner of job has server access

I have a web application developed through VS 2012 which has a button on a form that when operated starts a SQL Server agent job on the server that runs an SSIS package. The website and the instance of SQL Server with the agent and SSIS package are
on the same windows 2008 r2 server. When the button is operated no exceptions are raised but the SSIS package did not execute.
When I look in the logfileviewer at the job history of the sql server agent job I see that the job failed with message...
The job failed. Unable to determine if the owner (DOMAINNAME\userid) of job runWebDevSmall has server access (reason: Could not obtain information about Windows NT group/user 'DOMAINNAME\userid'<c/> error code 0x6e. [SQLSTATE 42000] (Error 15404)).,00:00:00,0,0,,,,0
...even though DOMAINNAME\userid is in the logins for the sql server and has admin authorities.
Could someone show me what I need to do to get this to run? Thanks tonnes in advance for any help, Roscoe

This can happen when the network is too slow to allow a timely completion of the verification. Or the account running has no such right.
I suggest you try using the SA account for the job as it does not require to poll the AD.
Arthur My Blog

"Unable to determine destination partition, disk or drive" when Media deployment is used

We are heavy users of MDT 2013's "media" deployments -- in fact, once we finish testing a new image build on our lab server, media is created and is the sole method we use to deploy new systems due to many limitations.
We ran into the following issue lately when using USB sticks or hard drives for our deployment media. Deployment of an OS image fails at the "Inject Drivers" stage. The hard disk inside the computer is formatted properly, but the TS fails with
the error "Unable to determine destination partition, disk or drive".
I dug into the logs, and it appears that "Inject drivers" does a check for where the \Drivers folder should be placed. The problem is that most USB hard disks and many higher-end USB sticks show up as "hard drives" rather than "removable
media" when plugged into the machine. Adding another physical disk that appears as a fixed disk with an NTFS partition apparently confuses MDT and you get this error message. I think any "ReadyBoost enabled" USB stick has to show up on the system
as a fixed disk rather than removable, so if you use these you might have this problem.
The only workaround is to explicitly specify the disk number and partition number to use when you invoke "Install Operating System." The drivers step must take this information when determining where to put the driver store.
Is there any other explanation for why this would be happening? We're stuck with media deployment for the foreseeable future, and until Microsoft fixes the problem with handling of split WIM files, we have to use NTFS formatted disks/sticks...this might
be making it harder for the MDT logic to determine where to put the OS.

MDT should be smart enough to know that it should Skip USB drives.
However if you have a USB 3 Hard DIsk (not a USB Flash Disk), that might be the problem
1. Try using only Flash Drives.
2. Try plugging the USB Hard Drive into a USB 2.0 port
3. Additionally try not to use USB Hard Drives that are *Larger* that the internal hard drive.
If you still have problems, can you copy your Bdd.log file to a public site like OneDrive and share the link?
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Unable to determine the value of component ''! Workflow error, please help

Hi All:
I am getting the error "Unable to determine the value of component ''" and workflows are not getting processed. I found OSS notes 879100 related to this issue but I am new to workflow and not sure where to start from! Here is the notes description:
The workflow WS20500025 ('Service Connection Order Processing') encounters an error directly after being started. The following error messages are displayed in the workflow log:
SWP102: Error at start of an IF branch
WL821: Work item 000000100012: Object FLOWITEM method EXECUTE cannot be executed
SWF_RUN535: Error '9' when calling service 'SO_OBJECT_SEND'
SWF_RUN534: Problems occurred when generating a mail
WL863: Notification of completion cannot be generated
SWF_EXP_001073: Unable to determine the value of component 'QUOTATION'
SWF_EXP_001072: Error in the evaluation of expression '<???>' for item 1
SWF_RLS_001101: Operator 'GT': The value of the left operand cannot be determined
SWP085: Error when starting work item 000000100012
SWP010: Error when evaluating the IF condition for node 0000000075
Other terms
Service connection processing, service connection workflow
Reason and Prerequisites
This is due to a program error.
The checks in the workflow Basis have been made stricter. A query of the type 'Quotation.number > 0' now causes an error if the container element 'Quotation' is not set. This is always the case if the workflow is is running without quotation prcessing, for instance.
Solution
The error is corrected in the next Support Package.
If you want to implement the corrections manually in your system, change the condition in step 000075 of workflow WS20500025 as follows:
&IS-U: Kundenangebot& EX
and &IS-U: Kundenangebot.Verkaufsbeleg& > 0
Save and activate the workflow.
I am new to workflow and not sure where to start from! Could someone please help me with this? Rewards assured.
Thanks.
Mithun

ANy ideas? Please help me if anyone knows the answer.
Thanks.
Mithun

Unable to determine name of central adapter engine

We have a central SLD set up. I am now moving some configuration and testing from our dev environment to our qa environment. When I do a cache notification from the Integration Directory I receive a message stating that "Unable to determine the name of the central Adapter Engine from the System Landscape Directory". When I look under the technical system type of Exchange Infrastructure of the system landscape directory I do not see the Adapter Engine of my QA or Production environment. I only see one central adapter engine listed. That of my development environment. It will not let me define another technical system to add these adapter engines because the button New Technical System is grayed out. How do I get these adapter engines defined in the SLD?
Thanks,
Jim

I also had the same problem. But when I opened Integration Directory and Repository from the links, it got added to the Technical system under Exchange Infrastructure. Only Adapter Engine was not getting added.
But after applying the note 764176. Adapter Engine added to SLD and after refreshing cache now Adapter Engine also got added to RWB components.
Only one problem now - in Message monitoring, If I select Adapter Engine from the drop down, I get page cannot be displayed. Is it due to the fact that I dont have any adapters configured?? and also no messages available for that matter?? as it is a fresh box..
Message was edited by: Thilothama v

Cache Notifications unable to determine name of Central Adapter Engine

Hi All,
When I tried Tools -> Cache Notifications in the integration directory, im getting
Unable to determine the name of the central Adapter Engine from the System Landscape Directory at this time.
Notifications to the central Adapter Engine are therefore listed using the technical name of the Adapter Engine.
This is usually structured as follows: af.<SAP System ID>.<Name of application server>
Once i click the OK on the pop up dialog which has this message, it has given the Notifications and Problems Tab.
In the Problems Tab, its has given an error message
'Unable to find an associated SLD element (source element: SAP_XIIntegrationServer"
Any suggestion of what to look for to modify ??
Thanks
Sourav

Hi Kedar,
Check this Blog. it should probabaly solve your problem.
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
Thanks
Sourav

Unable to Determine Receiver

Hi,
I am getting some problem in Receiver Determination. The error is generated at the Receiver Grouping tag in SXMB_MONI. The error description is Unable to Determine receiver(processing type:QOS = EO or EOIO)
I am also putting the trace snippet where the error is getting generated.
<Trace level="1" type="System_Error">Exit XMB because of system error!</Trace>
<Trace level="3" type="System_Error">System-Error: ROUTING.NO_RECEIVER_CASE_ASYNC</Trace>
<Trace level="3" type="System_Error">Unable to determine a receiver (processing type: QoS = EO or EOIO)</Trace>
<Trace level="1" type="Timestamp">2004-08-05T16:36:52ZEnd of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
Any one having any clue. Thanks in advance.
Ashish

Hi Hart,
I think that should be correctly specified as all the values that I have been choosing have been from the look up help and they are properly appearing there.
However, still that message is appearing... Anything else that you can please specify...
Thanks in Advance.
Ashish

Didadm: unable to determine hostname. error on Sun cluster 4.0 - Solaris11

Trying to install Sun Cluster 4.0 on Sun Solaris 11 (x86-64).
iscs sharedi Quorum Disk are available in /dev/rdsk/ .. ran
devfsadm
cldevice populate
But don't see DID devices getting populated in /dev/did.
Also when scdidadm -L is issued getting the following error. Has any seen the same error ??
- didadm: unable to determine hostname.
Found in cluster 3.2 there was a Bug 6380956: didadm should exit with error message if it cannot determine the hostname
The sun cluster command didadm, didadm -l in particular, requires the hostname to function correctly. It uses the standard C library function gethostname to achieve this.
Early in the cluster boot, prior to the service svc:/system/identity:node coming online, gethostname() returns an empty string. This breaks didadm.
Can anyone point me in the right direction to get past this issue with shared quorum disk DID.

Let's step back a bit. First, what hardware are you installing on? Is it a supported platform or is it some guest VM? (That might contribute to the problems).
Next, after you installed Solaris 11, did the system boot cleanly and all the services come up? (svcs -x). If it did boot cleanly, what did 'uname -n' return? Do commands like 'getent hosts <your_hostname>' work? If there are problems here, Solaris Cluster won't be able to get round them.
If the Solaris install was clean, what were the results of the above host name commands after OSC was installed? Do the hostnames still resolve? If not, you need to look at why that is happening first.
Regards,
Tim
---

ERM -- unable to determine matching org. level for BRGRU in the system

Hello,
I have a problem.
When I trY to import in the ERM (SAP GRC AC 5.3 SP5) a mass import of roles (derived roles) using the template Organizational Template.
Some of the roles gives me this error:
"Role not imported; unable to determine matching org. level for BRGRU in the system".
In the file I put for example
ZAPVAPINTE BUKRS 0083
Am I doing it right? or do I have to put $BURKS?
Best regards.
Pablo Mortera.

I have found that when you run the background job "syncronization of the organizational values" it pulls the org value name and all "values" assigned to it. If you don't have values specified (on the table level) for the org name, you get this error. We have many fields that we use values for these fields but they aren't specified in the table.
For example: We have the org value "PLVAR" with the values "AL", "01", "02", "03", and "GB" assigned to it. You can actually see these values in the backend system using SE11. We do not get this error on this org value. However, we have another org value "SACHZ" that we use, but we do not have any values assigned to it on the table level, so it is giving us this error. We are trying to find out how to populate the "values" field since this was not done through configuration.
Here are the steps: (1) Go to SE11 in your backend system. (2) Put your org value (example: PLVAR) in the "DATA TYPE" field and click display. (3) Double click on the Domain name. (4) Go to the Value Range Tab and click on the "Value Table" name if there is one. This is the table that has the org values assigned in it - normally done through configuration. (5) go to Utilities --> table contents --> display. (6) execute the table contents. These are the values that the sync job pulls over. If there are no values there or if there is no "values table" name, you get the error. If there are values there, you don't get it.
We are working with our technical team to get the values in these fields to see if that works. Another quick way to see if there are values assigned to the org field is to use "Org Value Mapping" in ERM. Select the "derived org level field" you want to see and click on the "org value from" magnifying glass. If no values are there, a "values table" hasn't been populated in SE11.
It doesn't make much sense to me though because we can still use values for these fields for our derived roles....we just don't populate the table with them.
I'll update this message if we find a solution.
Thanks,
Peggy

Unable to determine the install root path for the LabVIEW Runtime Engine

Hi,
i have an issue with using a LabVIEW interop assembly in a .NET application. I get an exception "Unable to determine the install root path for the LabVIEW Runtime Engine" when calling the assembly.
The little test program is attached below. It's called dotNETHost.exe. If you excecute the programm a dialog with an button appears. Clicking the button shall open another dialog (the LabVIEW Interop component). But the only thing I get is the exception message. The ZIP folder also contains the complete exception meassage (ExceptionMessange.jpg & ExceptionDetails.txt).
The Interop Assembly was built with LabVIEW 2011. We use Visual Studio 2010 and .NET 4.0.. The dotNETHost.exe.config file is prepared as mentioned in Knowledge base - Loading .NET 4.0 assemblies.
The Interop assembly contains only one simple dialog (loop is finished by clicking OK) without calling any other VIs or other DLL's. In case of this there's also no support directory generated by the build process.
I have no idea why it doesn' work. I hope anyone can help me.
Thanks in advance
Kay
Attachments:
Debug.zip ‏75 KB

This may be unrelated, but Labview and .Net4.0 dont work well together. Not yet anyway. I had to compile my assembly in 3.5 to get it to work.
Please read the following:
http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/configuring_clr_version/
http://digital.ni.com/public.nsf/allkb/32B0BA28A72AA87D8625782600737DE9
http://digital.ni.com/public.nsf/allkb/2030D78CFB2F0ADA86257718006362A3?OpenDocument
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

Unable to determine XI party

Hi,
I'm still trying to implement an IDoc to RosettaNet scenario. It seems to work fine until the last step, the sending of the PIP message. In Message Monitoring I get the following error.
Delivering to channel: PIP3B2_V0100_Shipper_Send_AdvanceShipmentNotification
Error Unable to determine XI party '. ' party not configured for party schema DUNS, party agency 016
Error occurred in CPA Facade processing. - Could not find party configuration for Party\=;PartySchema\=DUNS;PartyAgency\=016. - Party found to be null or empty : Could not find party configuration for Party\=;PartySchema\=DUNS;PartyAgency\=016.
The communication channel (type rnif adapter, receiver) belongs to party "TestParty" which has a duns specified. But it seems the system is looking for another party or duns? I have no idea where. It also doesn't make any difference whether I fill in something in tab identifiers of the communication channel or not.
I'll reward points for any helpful answer.
Thanks
Michael

Hi
Refer these blogs
'Close Encounters' with the Rosettanet STK
About Electronic Documents, Business Documents and Messages
SAP Launches Inititative for Industry Content
Service-enabling RosettaNet business processes
regards,
surya

Message 02648: "Unable to determine a calculation squema"

Similar Messages

Maybe you are looking for