Message 5702:A balance has occured in transaction currency INR

A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 52,998.00' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application
Please help us how to solve and the steps for solving this issue
and the share the message to this email id:
Thanks for

Hi,
Derived depreciation areas could no handle APC differences unless you activate the indicator "Treat Derived Depreciation Area As Real Area" under the following menu:
SPRO -> Asset Accounting -> Valuation -> Depreciation Areas -> Define Depreciation Areas).
If you set this indicator, then the system posts the real difference. If you would like to apply this indicator you have to complete the account assignment in the configuration, too.
You can switch the derived area from a special reserves area to a "handled as real" area in transaction OADB. There is no other possibility to get the derived area post APC differences, which you definitely have on some assets.
Please also review and apply the following Notes:
759890 Depreciation run ends with error F5 702
1094330 F5 702 with retirement on group asset
1024598 Incorrect values with repeated simulation
regards Bernhard

Similar Messages

When I try to import, I receive the following message: "An internal error has occurred: not enough memory". I always download my photos onto an external hard drive.

Yesterday,I downloaded an update for Lightroom 5. Now when I try to import, I receive the following message: "An internal error has occurred: not enough memory". The message comes up right after I click import, before I choose a file to upload.Here is the information I can think of that might be needed to answer this question:
- I always download my photos onto an external hard drive.It is about 10 % full.
- It says I have Lightroom 5.6 64 bit
- I am working from a newer laptop (Windows). The internal drive on the laptop has 289 gb and I am using 61 gb total memory.
- I have edited 2794 photos in Lightroom and it is all in one catalog.
- I did not have this problem until I made the update. I did have my first "bug" earlier this week when one of my photos had a line show up through the middle of it when I exported it. I was able to export it a second time without the line.
If there is more info. needed, let me know. I do photography as a hobby and know enough about Lightroom to edit out blemishes and adjust color balance, but not too much more, so forgive my ignorance if this is an obvious fix.
Sincerely,
Adrianne

Not Enough Memory typically refers to RAM. How much RAM do you have on your 64-bit OS computer? Do you have other programs running that may be using most of the memory?

I keep getting the message "An unknown error has occurred" when trying to sign in to the App Store. Why?

I keep getting the message "An unknown error has occurred" when trying to sign in to the App Store. How do I solve this problem?

Make sure you have the correct country selected. Click the round flag icon bottom right side of the App Store window.

I just installed Lightroom CC. When I try to open it, I get an error message: "An internal error has occurred. Cannot create the required folder: ..."

I just installed Lightroom CC. When I try to open it, I get an error message: "An internal error has occurred. Cannot create the required folder: ..."

Cannot create the required folder

I got "Invalid link" when I to reset my security questions from rescue email. Moreover when I log in into my Apple ID and click on Passwords and Security I'm thrown out with the message "An unknown error has occurred".

Here is my problem:
Need to change my email with the one that currently I'm using for rescue
Planed to change first the rescue email with a new one.
But:
I Forgot the security questions
Followed the reset security questions instructions.
Got the email on the rescue address but The link I've got on my rescue email to reset my security questions is invalid. By now the 3 hour window for the validity of the link is gone.
If I go via Apple ID, I login successfully but when I select Security I'm thrown back into Manage your Apple ID screen that displays now as well this message "An unknown error has occurred"
Tried several times, the same again and again.
On top of the long hours on the forums I spent 20 minutes over the phone with the US support on international charge, eventually I hanged up while waiting too long for the 3 rd expert but got an email later on indicating to clear my browser history and try again, which didn't work. Case number 519598448. Used my laptop with IE and my iPad, same result.

This problem now appears for me too.
When using iforgot.apple.com email-verification clicking the reset link results in the "Invalid Link" error.
The error, that caused me to do this (password failing to verify against iCloud) has vanished since though.

"Event code: 3008 Event message: A configuration error has occurred" while accessing the sharepoint site.

Hello All,
Wish You Happy New Year to All in advance.
while accessing the share point site i got the error message
Server Error in '/' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: The element <forms> may only appear once in this section.
Source Error:
Line 104: 
Line 105: <forms loginUrl="/_layouts/log-in.aspx" />
Line 106: <forms loginUrl="/_layouts/log-in.aspx" />
Line 107: <forms loginUrl="/_layouts/log-in.aspx" />
Line 108: </authentication>
Source File: C:\Inetpub\wwwroot\wss\VirtualDirectories\4545\web.config    Line:
106
Version Information: Microsoft .NET Framework Version:2.0.50727.3662; ASP.NET Version:2.0.50727.3658
i have found event message in the event log
Event code: 3008
Event message: A configuration error has occurred.
Event ID: 523cefee6a0943948cf01b4e9f476fff
Event sequence: 77
Event occurrence: 76
Event detail code: 0
Exception information:
    Exception type: ConfigurationErrorsException
    Exception message: The element <forms> may only appear once in this section. (C:\Inetpub\wwwroot\wss\VirtualDirectories\4545\web.config line 106)
Request information:
    Request URL: http://beesppesxapp70:4545/_vti_bin/sitedata.asmx
    Request path: /_vti_bin/sitedata.asmx
    User host address: 172.16.20.80
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: abc\wss_setup
Thread information:
    Thread ID: 1
    Thread account name: abc\wss_setup
    Is impersonating: False
    Stack trace:    at System.Configuration.BaseConfigurationRecord.EvaluateOne(String[] keys, SectionInput input, Boolean isTrusted, FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentResult)
   at System.Configuration.BaseConfigurationRecord.Evaluate(FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentResult, Boolean getLkg, Boolean getRuntimeObject, Object& result, Object& resultRuntimeObject)
   at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
   at System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
   at System.Web.Configuration.RuntimeConfig.GetSectionObject(String sectionName)
   at System.Web.Configuration.RuntimeConfig.GetSection(String sectionName, Type type, ResultsIndex index)
   at System.Web.Configuration.RuntimeConfig.get_Authentication()
   at System.Web.Security.FormsAuthenticationModule.Init(HttpApplication app)
   at System.Web.HttpApplication.InitModulesCommon()
   at System.Web.HttpApplication.InitInternal(HttpContext context, HttpApplicationState state, MethodInfo[] handlers)
   at System.Web.HttpApplicationFactory.GetNormalApplicationInstance(HttpContext context)
   at System.Web.HttpApplicationFactory.GetApplicationInstance(HttpContext context)
   at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
kindly advise me
Thank a lot in advance

Hi,
As per the error logs it seems you have the Form element twice in your web config file. Just take one or the other one out. if you did any changes in web. config file please share and elaborate little more about the changes if you have made recently before
the error.
Krishana Kumar http://www.mosstechnet-kk.com
Please mark the replies and Proposed as answer if they help and solve your issue

Cannot download apps to iPad since iOS 5.1 update. Get error message "An unexpected error has occurred"

cannot download apps to iPad since iOS 5.1 update. Get error message "An unexpected error has occurred"

Hi mike,
Seems like a frustrating problem! Try restarting your device, and trying again. If that doesn't work, in settings, under store, tap your apple id at the bottom of the page, and then sign out. Sign back in again, and try again.
Also, check you have enough remaining space on your iPad for the app you want to download, you can do this in settings, then general, then usage.
I also reccomend buying the app in iTunes on your computer, and then syncing it to your device.
Let me know how you get on, and I'll get back to you with further help if needed,
Nathan

Mavericks will not download from the App store. Repeatedly receive a message that "an error has occurred. Try again"

I have repeatedly tried to download Mavericks from the App store. When attempted from the update tab it fails and instructs me to try again from the Purchases tab. When I try it there, I receive an error message that "an error has occurred" and to try again. I have successfully downloaded other apps (both Apple and third party) but Mavericks won't do it.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

I can not sighn in. I get the message A network error has occurred while attempting to sign in.

I can not sighn in. I get the message A network error has occurred while attempting to sign in.

Hi rebjrbaker,
I'm guessing that you're trying to log in to the service from within Reader. If that's the case, you may need to update the version of Reader you're using. Choose Help > Check for Updates. You should be using version 11.0.9 (this update was just released on Tuesday, 9/16).
Best,
Sara

TS1702 when I want to install some application from apple store, I always got message " An unknown error has occurred" what should I do to install the application?

when I want to install some application from apple store, I always got message " An unknown error has occurred" what should I do to install the application?

I have the same problem. I need answers on how to fix this. any ideas?

I'm unable to update my apps or download new apps to my Iphone. When I try I get a message "An unknown error has occurred". It was happening before and after the last OS upgrade. I've done a hard reboot with no effect. Any suggestions???

I'm unable to update my apps or download new apps to my Iphone. When I try I get a message "An unknown error has occurred". It was happening before and after the last OS upgrade. I've done a hard reboot with no effect. Any suggestions???

Have either of you had any luck with this issue. It began happening to me today when I was trying to purchase music on iTunes. I have purchased music and games in the past and have had no problem. Any help would be appreciated.

When I attempt to connect to iTunes Store, I receive the following error message: An unknown error has occurred (0x80090318). Any help appreciated!

When I attempt to connect to iTunes Store, I receive the following error message: An unknown error has occurred (0x80090318). Any help appreciated!

Hey there Dan256162,
I understand that you are receiving a specific error code when attempting to connect to the iTunes Store, error 0x80090318. I have an article for you that references this code and links you to another article for troubleshooting to address this issue. Here is the article that references the error code:
iTunes: Possible iTunes Store errors - Apple Support
http://support.apple.com/en-us/HT203174
And here is the linked troubleshooting article that will help you resolve the issue:
Apple software on Windows: May see performance issues and blank iTunes Store - Apple Support
http://support.apple.com/en-us/TS4123
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

I keep getting the message an unknown error has occured 0x80090318. I don't know how to fix it. I even deleted itunes off my computer and reinstalled and still get the error message

I keep getting the message an unknown error has occured 0x80090318. I don't know how to fix it. I even deleted itunes off my computer and reinstalled and still get the error message

This helped me.
Go to Start -- Accessories -- Command Prompt, make right click and choose run as administrator
Type this command : netsh winsock reset
then restart your computer, everything should be ok after this. Good Luck.

How can get Dreamweaver to stop error message: an ftp error has occurred- cannot connect to host?

Dreamweaver is locking me out when I try to connect to the host via ftp. I get the error message: "An ftp error has occurred - cannot make connection to host". This error message started yesterday when I used the wrong host ftp address too many times. I have since received the correct ftp address from my website host, but the system won't even let me log in...it just gives me that error message when I click the connection button on the panel. My website host recommends that I uninstall Dreamweaver and re-install it again. My concern is, if I un-install the Dreamweaver app, which I downloaded from the Cloud, will the Cloud know I've un-installed Dreamweaver and allow me to download it again? Please help.

See my response in your most recent thread. Please don't double post like that - it can confuse things considerably when replies come in to both threads.

My Itunes program has stopped working. Message:An onknown problem has occurred (-42032) - what can I do? Björn

Hi
My Itunes program goes down - tried to reeinstall but I does not help. I get the message: An unknown problem has occurred (-42031)
What can I do?
Björn

If your iTunes is up to date, remove the SC Info folder.

Message 5702:A balance has occured in transaction currency INR

Similar Messages

Maybe you are looking for