Message after "uninstall_flash_player.exe"

I have Windows Vista (without SP1)
After executing "uninstall_flash_player.exe" pop-up window
(Windows Defender may be...) told me that program (just executed)
may be installed incorrectly and asked me:
"repeat installation", "installation done correct" or
"cancel".
What should I answer?
p.s. This pop-up windows I got both after uninstall Flash
player 9, and another time after uninstallation, when I even had no
Flash player....

That pop-up window was done not from Windopws Defender, but
was done from
"Problem reports and Solutions Control Panel Support"

Similar Messages

When i open iTunes i get this message "iTunes: iTunes.exe - Entry Point Not Found" "The procedure entry point RefAudioFileWritePackets could not be located in the dynamic link library CoreAudioToolbox.dll." how do i fix this!

when i open iTunes i get this message "iTunes: iTunes.exe - Entry Point Not Found" "The procedure entry point RefAudioFileWritePackets could not be located in the dynamic link library CoreAudioToolbox.dll." how do i fix this!

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes

TS1489 the instructions are misleading, there is no compatability tab under itune properties. still getting the message that itune.exe run in compatability mode-so??

dear all,
appreciate any help with the new iyune install.
get a message that itune.exe set to run in compatabilty mode for an older version of windows. i use windows7.
tried to follow the apple support instructions but found them misleading as couldn find compatability tab under (right click) prperties...
any other idea??
many thanks

Amazing that someone noticed this post and took a stab at it after over a year... Actually, I found my answer long ago, and have tried to go back and post?it'son several boards where I had been looking for the answer. It seems to be such a common problem that I figure someone else can surely use this solution as I did. I would suggest that anyone?who is experiencing the frustration of not?getting their computer to recognize their device?read the very enlightening and helpful page that I am linking to here:
http://www.misticri'ver.net/forums/showthread.php?t=30939? (this is from a forum for iRi'ver, but the info and fix are uni'versal)
This simple solution involves correcting the ENUM keys in the Registry (not as scary as you might think) and deleting all instances of your player from the Device Manager and then reinstalling so that Windows and other applications will all recognize your player again. It's so simple, and once I tried it, I was amazed that's all it took to fix the problem.
?I?suggest you read the whole page and follow the instructions as they are given. I deleted and re-installed my player several times and then rebooted a couple of times before it took effect, but then it did, and I was able to download the Firmware and have had continued success with my original player that I posted about as well as others I have acquired since I first posted that message in 2006. For reasons I have not yet identified, this problem still happens every now and again, sometimes when I switch between players to synchronize. It may well be that when I use my registry cleaner or some other utility that "fixes" my registry, that it resets this particular key - but as long as it's easy to fix, it's not a problem. Hope this helps others who may stumble upon this odd little problem with the Zen Xtra.Message Edited by TrixieInDixie on -05-200709:28 PM

After Effects.exe has stopped working (on initialization)

I have a Windows Vista Ultimate 32-bit machine with Intel Core2 Extreme (Q6850) @ 3GHz with 4GB RAM 1TB drive space with 152GB used. [Adobe Creative Suite 3 Master Collection]
Upon initialization of Adobe After Effects I see the splash screen as it loads it's components then all of a sudden I get an error message that "After Effects.exe has stopped working", Vista then attempts to find a "solution" and then the program closes. This also is occuring with Sound Booth & Premier Pro so I'm thinking it may be a codec issue. I've tried reinstalling (repairing) and I've uninstalled it completely then rebooted and installed it again with no success. Unfortunately I'm stuck with Vista, are there any known solutions to this issue?

Exactly as David says. Vista installs always require Administrator access. If you have turned off UAC, log on to the Administrator account, otherwise choose the method already mentioned. Before attempting this again, use the CS3 Clean Scripts from the support pages. They will delete everything instantly and spare you a lengthy uninstall, plus they will fix the install references on the system, so you will get a clean install.
Mylenium

Error Message after 7.0 downloand

I keep getting error message after I installed 7.o
Quicktime Unanviable
Itune requires windows 2000 or later
Please make sure compatibility mode is disabled in the compabiltiy tab of the properties itunes. exe
I had 3 people lok at this and noone can help me.
Can some one HELP ME.

Rather than posting in this forum, which is dedicated to Mac and Windows compatibility, try posting in either the QuickTime forum <http://discussions.apple.com/category.jspa?categoryID=122> or the iTunes forum <http://discussions.apple.com/category.jspa?categoryID=149>.
Search there for "compatibility mode".
Good luck! bill
1 GHz Powerbook G4 Mac OS X (10.4.8)

Error Message after Login

I get the following message after logging in my X200s.
"ACWLIcon.exe - Entry Point Not Found
The procedure entry point ?PrintDebugLog@AcLogInfo@@QAAPAGZZ could not be located in the dynamic link library ACHelper.dll."
How do I resolve this issue and stop the message from appearing again? Thanx.

Did all the updates from system update complete successfully or did you get some errors? Did you update all drivers and applications suggested? What version of Access Connections do you use?
I would recommend to uninstall Access Connections, reboot and then reinstall.
You didn't mention what OS you use, but you can find the latest version of Access Connections using the links below.
Windows 7:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73682
Windows Vista:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67283
Windows XP:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4ZLNJB
-gan

Satellite M30-704 boot slow and 0203 failure IDE#2 message after drive replace

Hi,
two problems:
firstly after replacing the cd/dvd drive my computer will not now boot automatically and shows an '0203 failure IDE#2' message. I can then boot it but this all takes time?
second problem: before I can access any programme, a message reading: 'apdproxy.exe - Application Error - the application failed to initialize properly (0xc0000006)' appears twice before I can continue and the computer is then very slow.
Can anyone offer any solutions? (ps - these two problems are not linked as they occurred months apart).
Thanks, Gardiner

1.) I would say the BIOS cannot handle the new drive properly because of the wrong master/slave/c-sel settings but its strange that the drive runs.
I think you should check in the device manager the primary and secondary IDE channels.
The transfer mode should be set to DMA if available and device type Auto detection
2.) It seems the 'apdproxy.exe is a part of the Adobe Photoshop or similar application.
This software could cause an error. So simply try to reinstall this program

Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)

Hi all,
I have TFS2012 and run several projects.
We encounterwed with such an error while using Build server.
Overall Build Process
Initial Property Values
AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
BinariesSubdirectory =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MSBuildArguments =
MSBuildPlatform = Auto
RecursionType = OneLevel
SourcesSubdirectory =
TestResultsSubdirectory =
Verbosity = Diagnostic
00:00
Get the Build
00:00
Update Build Number
Initial Property Values
BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
Final Property Values
BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
Result = Ephone_DIT_Deploy_20150424.1
01:56
Run On Agent (reserved build agent U4VMDWODBDEV03 - Agent1)
Initial Property Values
MaxExecutionTime = 00:00:00
MaxWaitTime = 04:00:00
ReservationSpec = Name=*, Tags=
00:00
Get the Build Directory
Initial Property Values
Result = d:\temp\217\CTI\Ephone_DIT_Deploy
01:53
If Not String.IsNullOrEmpty(ConfigurationFolderPath)
Initial Property Values
Condition = True
01:53
Run TfsBuild for Configuration Folder
Initial Property Values
BinariesSubdirectory =
BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
CommandLineArguments =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MaxProcesses = 1
NodeReuse = False
RecursionType = OneLevel
SourcesSubdirectory =
TargetsNotLogged =
TestResultsSubdirectory =
ToolPath =
ToolPlatform = Auto
Verbosity = Diagnostic
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\MSBuild.exe /nologo /noconsolelogger "d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TFSBuild.proj" /m:1 /nr:False "@d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TfsBuild.rsp"
00:08
Getting sources
00:02
Labeling sources
00:19
Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileConfiguration.
00:19
Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileSolution.
00:19
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.sln for default targets.
00:05
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:10
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:05
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Workflow.Targets (121): Compilation failed. Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneMarcomApplication/EPhoneMarcomApplication.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallbackApplication/EPhoneCallbackApplication.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneQueView/EPhoneQueView.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.Runner/Ephone.Tests.Runner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneIDD/EPhoneIDD.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegratorTest/ChannelIntegratorTest.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
MSBuild Log File
00:08
Generating list of changesets
00:20
Built Skins\SkinEPhone.cs for default targets.
Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): The "CreateNewWorkItem" task failed unexpectedly.
Microsoft.TeamFoundation.WorkItemTracking.Client.WorkItemTypeDeniedOrNotExistException: TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
at System.Activities.WorkflowApplication.Invoke(Activity activity, IDictionary`2 inputs, WorkflowInstanceExtensionManager extensions, TimeSpan timeout)
at System.Activities.WorkflowInvoker.Invoke(Activity workflow, IDictionary`2 inputs, TimeSpan timeout, WorkflowInstanceExtensionManager extensions)
at Microsoft.TeamFoundation.Build.Tasks.WorkflowTask.ExecuteInternal()
at Microsoft.TeamFoundation.Build.Tasks.Task.Execute()
at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()
at Microsoft.Build.BackEnd.TaskBuilder.<ExecuteInstantiatedTask>d__20.MoveNext()
00:03
Creating work item
Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)
Exception Stack Trace: at System.Activities.Statements.Throw.Execute(CodeActivityContext context)
at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
Final Property Values
BinariesSubdirectory =
BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
CommandLineArguments =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MaxProcesses = 1
NodeReuse = False
RecursionType = OneLevel
SourcesSubdirectory =
TargetsNotLogged =
TestResultsSubdirectory =
ToolPath =
ToolPlatform = Auto
Verbosity = Diagnostic
Final Property Values
Condition = True
Final Property Values
MaxExecutionTime = 00:00:00
MaxWaitTime = 04:00:00
ReservationSpec = Name=*, Tags=
Result = U4VMDWODBDEV03 - Agent1 (vstfs:///Build/Agent/217)
Final Property Values
AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
BinariesSubdirectory =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MSBuildArguments =
MSBuildPlatform = Auto
RecursionType = OneLevel
SourcesSubdirectory =
TestResultsSubdirectory =
Verbosity = Diagnostic
Please have a look and guide where to find a problem
Thanks ahead

Hi Hooi,
I'd like to know whether you can build successfully in your local machine with MSBuild. You have to build succeed with MSBuild beore you can build with TFS Build since TFS build use MSBuild as its default compiler.
From the error message, you might build with wrong platform for your project. Please check if the build platfrom is proper. If you have customization of your build process template, it would be better to elaborate the reproduce steps and customization details.
Best regards,

I keep getting this message after closing Firefox and attempt to reopen-Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

I keep getting this message after closing Firefox and attempt to reopen-Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

See:
* http://kb.mozillazine.org/Recovering_a_missing_profile
* http://kb.mozillazine.org/Profile_in_use

Repeated ORA-12547 Messages after installing Oracle 10g

Hi,
I installed Oracle 10g on a Redhat ES 3 box, and the install went okay, but when I try and interact with the server I get the message:
ORA-12547: TNS: lost contact
For example, if I use the Database Configuration Assistant to attempt to create a database, I will see the above message when it begins the database creation process, or if I try to interact with the Oracle server using sqlplus I will see the above message after each command entered.
I had recently tried to install Oracle 8.1.7 on the same box, but abandoned that after deciding that the effort required to link Oracle 8 on RHES3 just wasn't worth it. I have been told that this previous partial installation may be the cause of the problem, and have been advised to uninstall Oracle 8, uninstall Oracle 10g, and reinstall Oracle 10g. I find it hard to believe that it would require such an action to solve this problem. Is there any configuration changes I can make to resolve it? Also, what does this message actually mean?
I am new to Oracle, so thanks for any help with this problem.
Colm.

My last message asking for a grater degree of specificity was not overly specific, hence I am posting the kernel parms that I have set with the hopes that you will spot one that I set improperly or one that I neglected to set.
[root@awyr ~]# cat /proc/sys/kernel/shmmax
2147483648
[root@awyr ~]# cat /proc/sys/kernel/shmmni
4096
[root@awyr ~]# cat /proc/sys/kernel/shmall
2097152
[root@awyr ~]# ipcs -lm |grep "min seg size"
min seg size (bytes) = 1
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $1}'
250
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $2}'
32000
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $3}'
100
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $4}'
128
[root@awyr ~]# cat /proc/sys/fs/file-max
65536
[root@awyr ~]# cat /proc/sys/net/ipv4/ip_local_port_range
1024 65000
[oracle@awyr Desktop]$ ulimit -n
63536
[oracle@awyr Desktop]$ ulimit -u
4091
[oracle@awyr Desktop]$ ulimit -a
core file size (blocks, -c) 0
data seg size (kbytes, -d) unlimited
file size (blocks, -f) unlimited
max locked memory (kbytes, -l) 32
max memory size (kbytes, -m) unlimited
open files (-n) 63536
pipe size (512 bytes, -p) 8
stack size (kbytes, -s) 8192
cpu time (seconds, -t) unlimited
max user processes (-u) 4091
virtual memory (kbytes, -v) unlimited
from sysctl -a
my fs.file-max = 65536
in my limits.conf I added:
oracle soft nofile 4096
oracle hard nofile 63536
in my (1) /etc/pam.d/system-auth (2) /etc/pam.d/sshd (3) /etc/pam.d/su (4) /etc/pam.d/login
files I added:
session required pam_limits.so
and verified that it exists
in my limits.conf I added
oracle soft nproc 2047
oracle hard nproc 16384
my /etc/oratab has:
orcl:/usr/local/oracle/app/oracle/oracle/product/10.2.0/db_1:N
I tried to change the N at the end to a Y but to no avail
my /etc/oraInst.loc has:
inventory_loc=/usr/local/oracle/app/oracle/oraInventory
inst_group=oinstall
Thanks again for your atention
Richard

Repeated 'ORA-12547: TNS: lost contact' messages after installing Oracle 10

Hi,
I installed Oracle 10g on Redhat ES 3, and the install went well, but when I try and interact with the server I get the message:
ORA-12547: TNS: lost contact
For example, if I use the Database Configuration Assistant to attempt to create a database, I will see the above message when it begins the database creation process, or if I try to interact with the Oracle server using sqlplus I will see the above message after each command entered.
I had recently tried to install Oracle 8.1.7 on the same box, but abandoned that after deciding that the effort required to link Oracle 8 on RHES3 just wasn't worth it.
I have been told that my previous partial installation of Oracle 8 may be the cause of the problem, and have been advised to uninstall Oracle 8, uninstall Oracle 10g, and reinstall Oracle 10g. I find it hard to believe that it would require such an action to solve this problem. Are there any configuration changes I can make to resolve it?
My problem sounds like it may be similar problem to a recent posting by Hugo Ferrer - but my Spanish isn't good enough to fully understand Hugo's problem. Anyways, I am new to Oracle, so thanks for any help with this problem.
Colm.

My last message asking for a grater degree of specificity was not overly specific, hence I am posting the kernel parms that I have set with the hopes that you will spot one that I set improperly or one that I neglected to set.
[root@awyr ~]# cat /proc/sys/kernel/shmmax
2147483648
[root@awyr ~]# cat /proc/sys/kernel/shmmni
4096
[root@awyr ~]# cat /proc/sys/kernel/shmall
2097152
[root@awyr ~]# ipcs -lm |grep "min seg size"
min seg size (bytes) = 1
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $1}'
250
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $2}'
32000
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $3}'
100
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $4}'
128
[root@awyr ~]# cat /proc/sys/fs/file-max
65536
[root@awyr ~]# cat /proc/sys/net/ipv4/ip_local_port_range
1024 65000
[oracle@awyr Desktop]$ ulimit -n
63536
[oracle@awyr Desktop]$ ulimit -u
4091
[oracle@awyr Desktop]$ ulimit -a
core file size (blocks, -c) 0
data seg size (kbytes, -d) unlimited
file size (blocks, -f) unlimited
max locked memory (kbytes, -l) 32
max memory size (kbytes, -m) unlimited
open files (-n) 63536
pipe size (512 bytes, -p) 8
stack size (kbytes, -s) 8192
cpu time (seconds, -t) unlimited
max user processes (-u) 4091
virtual memory (kbytes, -v) unlimited
from sysctl -a
my fs.file-max = 65536
in my limits.conf I added:
oracle soft nofile 4096
oracle hard nofile 63536
in my (1) /etc/pam.d/system-auth (2) /etc/pam.d/sshd (3) /etc/pam.d/su (4) /etc/pam.d/login
files I added:
session required pam_limits.so
and verified that it exists
in my limits.conf I added
oracle soft nproc 2047
oracle hard nproc 16384
my /etc/oratab has:
orcl:/usr/local/oracle/app/oracle/oracle/product/10.2.0/db_1:N
I tried to change the N at the end to a Y but to no avail
my /etc/oraInst.loc has:
inventory_loc=/usr/local/oracle/app/oracle/oraInventory
inst_group=oinstall
Thanks again for your atention
Richard

How to Display a message after inserting row in table............

Hi
I want to display a message after inserting rows in table like *'you have inserted a new row successfully*'.
i am using the createinsert ADF Button to insert the rows in table.after that i am comitting it.
after commiting i want to display message for the user.for this what i need to do.
Please help me.
Sailaja.

user10860137
Can you please explain me the each line in the code briefly.
+public String saveButton_action(){+
BindingContainer bindings = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding("Commit");
Object result = operationBinding.execute();
+// note "!" operator has been removed from the default code.+
+if(operationBinding.getErrors().isEmpty()){+
FacesContext ctx = FacesContext.getCurrentInstance();
FacesMessage saveMsg = new FacesMessage("Record Saved Successfully");
ctx.addMessage(null,saveMsg);
+}+
return null;
+}+
And i have requirement to show the message on favcet "status bar".not in a popup window.(from the above code the message is showing in popup window. )the Layout i am using is PanelCollection.
can you tell me what i need to do.
Thanks
Sailaja.
Edited by: sj0609 on Mar 19, 2009 8:03 AM

How can I see my messages after restoring from backup?

I have 2.1gb of messages saved in my storage on my 4s but they're not in messages after restoring from backup.
How can I get all my messages back in my message app because I know they're their it's just a matter of getting them restored into the app.

When you restored your phone from an old backup, it wiped ALL data from your phone and replaced it with the data from that backup. It's like your phone went back in time.
Your data that was on the phone before you did the restore is now gone forever. There is no way to get these data back.

I'm getting an error message after importing a table through Dreamweaver into a page developed in Muse.

I'm getting a couple of messages after importing a table through Dreamweaver into a page developed in Muse. I have compared the code of the page with the table with the page before I inserted the table and cannot find anything missing. the web address is http://gourmetdreams.com/weekly-menu.html
How can I clear this up?
I also noticed that when I uploaded the file there was one error: "- error occurred - Access denied. The file may not exist locally, may be open in another program, or there could be a local permission problem."

Thanks for your help! I imported the table into Muse, then exported the site as html and opened it in Dreamweaver. I should've tried that in the first place but gave up when I couldn't edit it in Muse. I didn't know you could edit the html right in Muse. Also, my styling and the images I was using weren't showing up in Muse but once I opened it in Dreamweaver, everything fell into place. AND I could edit it! My client needs to edit this page every week, so I needed to be sure she could do that. She doesn't use Muse but does use Dreamweaver. At this point, I think I'll leave it alone and not try to style it with inline css. Maybe when I get a little more time, I'll try it. I just don't want to mess things up now that the're working.

I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

JUst experienced the exact same problem after changing password.Getting same message. Hope someone has an answer for this.

Message after "uninstall_flash_player.exe"

Similar Messages

Maybe you are looking for