Message alert & charge remaining

Hi... sorry a im a newbie to the support centre so i hope im in the correct group.
i have a iPhone 3GS 16GB, up until now it been perfect no complaints, but yesterday after running down the battery, i charged the phone, all appeared ok until i got a txt msg alert, i opened the msg but there was no new msg, now i have a 1 new / unread msg in a red circle.. but i go into check & there are no new msgs.
The other issue is that the charge remaining % does not now appear... both of these things happened yesterday and despite switching off & back on and reseting the phone "power off /on & the select button these faults still remain.
Will i have to connect the phone to iTunes and perhaps take the latest update?
thanks

Hi Mano! I never let my laptop sleep or hibernate. If I'm going to be gone for a long time, I shut it down. I aways have my adapter plugged in. That may be some thing to debate Having said all that, you might want to check here.
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
Attachments:
Capture48.JPG ‏131 KB

Similar Messages

All the message dates in the message list changed in every mailbox to a recent date, I don't know why.. The dates within the messages' headlines themselves remained correct. How do I re-establish the correct dates also in the mailboxes' message list?

All the message dates in the message list changed in every mailbox to a recent date, I don't know why.. The dates within the messages' headlines themselves remained correct. How do I re-establish the correct dates also in the mailboxes' message list?

First thing is to forget all the complex configs and just try to schedule the report to run once now, no alerts, no notifications, no nothing.
Does that work?
Then you can build up the schedule, to see where the problem is coming from.
Sincerely,
Ted Ueda

Concerned about "Charge Remaining" should i be worryed

I got my MBP back in august and im worryed about the battery under battery information the following is display.
Charge Information:
Charge remaining (mAh): 1134
Fully charged: No
Charging: No
Full charge capacity (mAh): 5997
Health Information:
Cycle count: 166
Condition: Normal
Should i get my battery replaced or is this okay?

Hi JediZenMaster,
THe "charge remaining" figure simply tells you how charged up the computer is at the present moment (charge it , it will go up, use it on the battery, it will go down.)
The figure that tells you more about the health of your battery is the "maximum charge capacity". In your case it stands at roughly 90% of the original capacity, after the equivalent of 166 charge "cycles".
This is OK, but it sounds to me as if you are probably using the battery fairly heavily, charging up every day and then running right down again, to have run up 166 cycles since last August. THis isn't really the best way to treat Lithium batteries if it can be avoided.
You might find it worth reading neuroanatomists excellent battery FAQ at http://discussions.apple.com/thread.jspa?threadID=1764220 and Apple's own information about notebook batteries at http://www.apple.com/batteries/notebooks.html
(whoops, sorry for repeating you stedman - went off and had a cup of tea in the middle of writing the response and didn't know you had posted)
Cheers
Rod
Message was edited by: Rod Hagen

Since updating my iphone 4 to IOS5 my message alert tone is distorted

since updating my iphone 4 with IOS5 my message alert tone (tri tone) is distorted it was fine before the update

Since updating my Iphone 4s to the iOS 6, i am now having to charge my phone at least three times a day, whereas before I did the update, I would charge it at night before bed and it would stay charged the whole day.

Text message alert- turn off or modify

In spite of some other comments on this topic, it is not easy to find how to modify the text message alert in the E71 manual. I have been awakened several times by amber alerts during the night. When I tried to find how to turn off the message alert in the manual, I could not find it. I emailed Nokia and the following (modified a little) is what I received:
To turn off or change text message alert tone:
In response to your concern, we would like to inform you that you can change the message alert tone of your device.
Please refer below for the steps:
1. Select Menu
2. Select Tools
3. Select Profiles and to change the message tone
4. Select current profile if not already selected
5. Select Options
5. Select Personalise
6. Select Message alert tone (page to off or vibrate if preferred)
Problem solved! I hope this helps some of you having the same problem.

I think this is what you are looking for.
http://www.wireless.att.com/cell-phone-service/services/services-list.jsp?catId= cat320008&LOSGId=&catName=Parental+Controls

Text message alert sound

I have a new LG Revere. When I receive a text message, the phone makes some sort of alert vocal sound. I can set the text message alert ring tone, but how do I turn off that alert vocal sound?

This question, and another regarding a "voice" or "vocal" alert, leads me to believe you have Voice commands enabled. I'm not sure where this is on the Menu system for the Revere - explore Menu, Tools, Sounds, Voice Commands, Alerts - see if there is a setting for those to be toggled on or off. You may also look in your user manual for those keywords to see if there is anything there that will lead to a way to turn these off.
** Update - Page 65 of the user manual has info on the Voice Commands and turning the prompts to Readout/Readout + Alerts/Tones only I think you want tones only....
http://cache.vzw.com/multimedia/mim/lg_revere/revere.pdf

What does this message mean Charging is not supported with this device?

What does this message mean Charging is not supported with this device?

You've gotten 2 good answers already, but there's a key assumption in both that you got the message when connecting the iPhone to some other device. If this is the case you can get an adapter in the Apple online store that will allow charging from older devices.
If, however, this message appears when you are not connected to anything the problem is dirt or moisture in the dock connector at the bottom of the phone. Clean it with a dry toothbrush or air blast.

Is there a way to turn off the message alert "Cellular data is turned off for _____"?

I turned off cellular data for about half of my apps so I don't go over my data limit (Thanks AT&T). Now every time I open these apps a message alert pops up saying "Cellular Data is Turned Off for _____. You can turn on cellular data for this app in Settings" And it gives two buttons, "Settings" and "Ok".
If it were only a few times, I wouldn't care about closing this message. But now that I have to do it like 20-30 times a day, it has become SUPER ANNOYING. Seriously Apple, how do I turn your stupid message off??? I TURNED OFF MY CELLULAR DATA FOR A REASON, please stop reminding me of what I already know.
AND the worst part is, when that message pops up it locks the phone so the home button doesn't work. Pretty lame software feature in my opinion.

There is a fix for this! I was about to jailbreak my phone to cure this issue, but found the answer on another thread.
Go to settings/notification center. Select the app in question and turn the slider for "allow notifications" to ON. Turn off the sliders below for sounds, etc. Now it shows up in the notification center separately (or seemingly not at all) and not on your screen when you switch to the app. Good luck!

I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried ch

I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried charging it at the store and got the same message. I was given another phone, I still get the same error with the new phone.

Wowuor,
Thank you so much for reaching to us today. I want to make sure that we get the device charging the correct way. There is no physical or liquid damage to the phone or to the power cord correct? Did this error just start to appear as of last week? Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

Message Alerting for PI 7.1 with Solution Manager 7.1

Hello together,
i am trying to get message Alerting of the SAP PI 7.1 to the solution manager 7.1 Alert Inbox (PI Monitoring).
I cant find a how to or something.
The following two options are in my mind:
1. implement in RZ20 an Monitor for PI-> create alert categories and rules -> create metrics for the pi in the solman 7.1 (system monitoring) setup to get these mtes.
2. implement the old ccms infrastructure
Goal: get Alerts in the Solman 7.1 PI MON Alert Inbox if some Messages as they defined in the RWB Alert Rules are not transfered.
Get anyone some know how with this use case?
Thanks and kind regards

Hi Mahr,
Solution Manager 7.1 has a functionality called Technical Monitoring, which keeps a track of all the performance based & availibility metrics of a managed system.
It can also be used to generate email alerts to a group of intended receipients.
I would personally recommend this over CCMS. It uses Diagnostics Agent to pull all these details from the managed system & the configuration is very easy to achieve.
Below is the guide to configure the same -
http://wiki.scn.sap.com/wiki/download/attachments/269157890/Setup+System+Monitoring+and+Alerting.pdf?version=1&modificat…
Best Regards,
Tanmeya

I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

Instead of getting annoyed, read the User's Guide and try basic troubleshooting.

Issue while creating Component Based Message Alerting in PI 7.31 Dual Stack

Hi,
We tried to implement Component Based Message Alerting following the steps mentioned in the below blog.
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/03/25/michals-pi-tips-component-based-message-alerting
Ours is PI 7.31 dual stack. However, after setting up the job with my own user id, I am getting the below error inside the log of Jobs tab:
javax.jms.JMSSecurityException: You do not have permissions: action alertingVP.queue and instance:name alertingVP.queue
action consumer
instance jms/queue/xi/monitoring/alert/ALERT-TO-MAIL
Please let us know what permission is required to set up the job.
Thanks,
Rahul

Hi,
Now I am able to receive alert in my mailbox. But it's coming with improper content.
I have set up the job at an interval of every 2 minutes in NWA, and in case if only 1 message fails in IE, in ideal case, I should receive only 1 message details in alert.
However, in every 2 minutes, I am receiving junk data and the number is increasing for the particular scenario for which the alert has been created. Also the Error Category mentioned is showing improper.
But in table SXMSALERTCONTENT I am able to view only the newly added failed entry.
An erroneous alert email content is pasted below:
63 messages failed for "Test_XXX" on "af.s0i.saps0i"
Root cause: -1
To navigate to the failed messages in the local message monitor use this link
The first 1 messages of that data collection:
"AdapterNamespace": "http://sap.com/xi/XI/System",
"AdapterType": "File",
"Channel": "FileSender_XXX",
"ChannelParty": "",
"ChannelService": "XXXXX",
"Component": "af.s0i.saps0i",
"ErrCat": "",
"ErrCode": "",
"ErrLabel": "-1",
"ErrText": "Configured source directory '\\Outbound\\XXX\\CREMAS' does not exist",
"FromParty": "",
"FromService": "XXX",
"Interface": "Z_CREMAS_SUSMM.CREMAS03",
"Namespace": "urn:sap-com:document:sap:idoc:messages",
"RuleId": "3a64dd6e1b1d3e58aff62ea70c97cb80",
"Timestamp": "2013-02-01T09:43:23Z",
"ToParty": "",
"ToService": ""
The failed message however do not relate to the 'source directory does not exist' issue. Please help.
Thanks,
Rahul

I can't find the new text message alerts for every person - help!

Hi.
As I frequently check the Apple website, I visited the iOS 4.2 download site. It said that you get custom text tones and 17 new sounds.
So I updated to get the new things. But then I checked Settings to see the new alerts and what they sounded like. But I only found the same old Tri-tone, glass, horn, etc. There were no new ones.
So I checked Phone, but there was no custom text message alert option.
Am I the only one experiencing this problem? I have an 8 month old iPhone 3GS and it works great.
I am also suspecting that it could be an iPhone 4-only deal.Which would be ridiculous because I would be really upset to see that Apple only cares about the people who cash in their hard-earned bucks on every new Apple gizmo they set eyes on.
Please help! Thanks in advance

I understand that it has been answered and has been said that it is for the iPhone 4 only; however, on their website it does not specify that, this is exactly what it states:
"Messaging with text tones
Know who’s texting without looking at your screen. Choose from 17 new alerts and assign custom tones for people in your contact list.
iPhone only."
If I am not mistaken, "iPhone only" includes every iPhone generation to which 4.2 can be installed in, not just the iPhone 4. If it is in case for the 4 only, then they should have specified and not made a misleading advertisement about it since every iPhone user has been waiting for new tones of any sort since the first iPhone ever came out. Making it available for only iPhone 4 users is a very fowl move from Apple since it's such a basic thing to the phone itself. They should address the issue correctly and make it available for the 3G and 3GS.
Apple just asked for angry customers with this one and they definitely know it's not fair.

How to exclude synchronous interfaces from component based message alerting

Hi Pi experts,
We are configuiring Alerts in PI 7.3 single stack.If we have 'n'number of interfaces, and if we configured general alerts for all.How to exclude synchronous interfaces in that.Alerting is for asynchronous interfaces only.How to do that.
Please advice on this.
Regards
Suneel

Hello,
>>What are your approaches regarding this requirement in the context of java-only?
I would suggest you to schedule jobs like this:
Customize Alerts Using Job in PI 7.31/PO
>> alerts are consumed according to the given interval and not in "real time" when error occurs, today solution using BADI is "real time" - if possible I would prefer "real time" solution
Check this:
Michal's PI tips: How to trigger an alert for Component Based Message Alerts (CBMA) via "API" ?
>>an separate service determine the actual alert count would be helpful to provide the correct value for maxAlerts, this have to be called beforehand
I haven't tried it but i think u can do that, since these consumers are nothing but JMS queues only so i think there will be a method to read number of alert counts.
>>In history I saw emails generated by the standard alert consumer which only contain details for the first alert, in my case I need details especially the message id for all errorneous messages
If ur max alert parameter is greater than 1 then u should see multiple alert text (along with message id and other details) in ur email message.
Thanks
Amit Srivastava

Java-only, Component based message alerting - loopback to sender system

Dear guys,
we are using the alert framework availbale on PI 7.11 to notify the sender system if there is an alert for specific interfaces. In that case a customer function module is called giving the message id of the request message (message is sent via ABAP proxy). As a result the according entry in customer table is updated.
The implemntation is based on the BADI ALERT_MODIFY_TEXT and uses the standard function module ALE_BAPI_GET_UNIQUE_RECEIVER to determine the system /rfc destination to send the alert notification.
This solution works fine so far.
As PI 7.11 dual stack is not the latest release, we are thinking of upgrading to current PI/PO release. In this context also shift to java-only installation is contemplated which will need an alternative solution for the described alert/error notification loopback.
Are there any possibilities analog to BADI to implement such a solution?
What are your approaches regarding this requirement in the context of java-only?
Any help/thoughts appreciated.
Best regards,
Jochen

Hello,
>>What are your approaches regarding this requirement in the context of java-only?
I would suggest you to schedule jobs like this:
Customize Alerts Using Job in PI 7.31/PO
>> alerts are consumed according to the given interval and not in "real time" when error occurs, today solution using BADI is "real time" - if possible I would prefer "real time" solution
Check this:
Michal's PI tips: How to trigger an alert for Component Based Message Alerts (CBMA) via "API" ?
>>an separate service determine the actual alert count would be helpful to provide the correct value for maxAlerts, this have to be called beforehand
I haven't tried it but i think u can do that, since these consumers are nothing but JMS queues only so i think there will be a method to read number of alert counts.
>>In history I saw emails generated by the standard alert consumer which only contain details for the first alert, in my case I need details especially the message id for all errorneous messages
If ur max alert parameter is greater than 1 then u should see multiple alert text (along with message id and other details) in ur email message.
Thanks
Amit Srivastava

Message alert & charge remaining

Similar Messages

Maybe you are looking for