Message Alert whilst charging

Hi,
When my Iphone (3GS 3.1.3) is on charge in the dock, I do not get any audible alert for a next SMS message, is this normal, or if not can anyone shed any light on the matter?
Thanks
Daniel

I intermittently have this issue as well. I never had been able to correlate it with a specific scenario, but every time I have noticed it, rebooting the phone fixed the problem for a while.
I have updated to iOS4 and am anxious to see if the behavior still exists.

Similar Messages

  • Since updating my iphone 4 to IOS5 my message alert tone is distorted

    since updating my iphone 4 with IOS5 my message alert tone (tri tone) is distorted it was fine before the update

    Since updating my Iphone 4s to the iOS 6, i am now having to charge my phone at least three times a day, whereas before I did the update, I would charge it at night before bed and it would stay charged the whole day.

  • Text message alert- turn off or modify

    In spite of some other comments on this topic, it is not easy to find how to modify the text message alert in the E71 manual.  I have been awakened several times by amber alerts during the night.  When I tried to find how to turn off the message alert in the manual,  I could not find it.  I emailed Nokia and the following (modified a little) is what I received:
    To turn off or change text message alert tone:
    In response to your concern, we would like to inform you that you can change the message alert tone of your device.
    Please refer below for the steps:
    1. Select Menu
    2. Select Tools
    3. Select Profiles and to change the message tone
    4. Select current profile if not already selected
    5. Select Options
    5. Select Personalise
    6. Select Message alert tone (page to off or vibrate if preferred)
    Problem solved!  I hope this helps some of you having the same problem.

    I think this is what you are looking for.
    http://www.wireless.att.com/cell-phone-service/services/services-list.jsp?catId= cat320008&LOSGId=&catName=Parental+Controls

  • Text message alert sound

    I have a new LG Revere. When I receive a text message,  the phone makes some sort of alert vocal sound. I can set the text message alert ring tone, but how do I turn off that alert vocal sound?

    This question, and another regarding a "voice" or "vocal" alert, leads me to believe you have Voice commands enabled.  I'm not sure where this is on the Menu system for the Revere - explore Menu, Tools, Sounds, Voice Commands, Alerts - see if there is a setting for those to be toggled on or off.  You may also look in your user manual for those keywords to see if there is anything there that will lead to a way to turn these off.
    ** Update - Page 65 of the user manual has info on the Voice Commands and turning the prompts to Readout/Readout + Alerts/Tones only  I think you want tones only....
    http://cache.vzw.com/multimedia/mim/lg_revere/revere.pdf

  • Is there a way to turn off the message alert "Cellular data is turned off for _____"?

    I turned off cellular data for about half of my apps so I don't go over my data limit (Thanks AT&T). Now every time I open these apps a message alert pops up saying "Cellular Data is Turned Off for _____. You can turn on cellular data for this app in Settings" And it gives two buttons, "Settings" and "Ok".
    If it were only a few times, I wouldn't care about closing this message. But now that I have to do it like 20-30 times a day, it has become SUPER ANNOYING. Seriously Apple, how do I turn your stupid message off??? I TURNED OFF MY CELLULAR DATA FOR A REASON, please stop reminding me of what I already know.
    AND the worst part is, when that message pops up it locks the phone so the home button doesn't work. Pretty lame software feature in my opinion.

    There is a fix for this!  I was about to jailbreak my phone to cure this issue, but found the answer on another thread.
    Go to settings/notification center.  Select the app in question and turn the slider for "allow notifications" to ON.  Turn off the sliders below for sounds, etc. Now it shows up in the notification center separately  (or seemingly not at all) and not on your screen when you switch to the app.  Good luck!

  • Unable to charge my Ipad 4 with my Laptop (HP 7010tx) USB . I am Getting error message as "Not Charging" . Please give a solution for this ...???

    Unable to charge my Ipad 4 with my Laptop (HP 7010tx) USB . I am Getting error message as "Not Charging" . Please give a solution for this ...???

    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • Message Alerting for PI 7.1 with Solution Manager 7.1

    Hello together,
    i am trying to get message Alerting of the SAP PI 7.1 to the solution manager 7.1 Alert Inbox (PI Monitoring).
    I cant find a how to or something.
    The following two options are in my mind:
    1. implement in RZ20 an Monitor for PI-> create alert categories and rules -> create metrics for the pi in the solman 7.1 (system monitoring) setup to get these mtes.
    2. implement the old ccms infrastructure
    Goal: get Alerts in the Solman 7.1 PI MON Alert Inbox if some Messages as they defined in the RWB Alert Rules are not transfered.
    Get anyone some know how with this use case?
    Thanks and kind regards

    Hi Mahr,
    Solution Manager 7.1 has a functionality called Technical Monitoring, which keeps a track of all the performance based & availibility metrics of a managed system.
    It can also be used to generate email alerts to a group of intended receipients.
    I would personally recommend this over CCMS. It uses Diagnostics Agent to pull all these details from the managed system & the configuration is very easy to achieve.
    Below is the guide to configure the same -
    http://wiki.scn.sap.com/wiki/download/attachments/269157890/Setup+System+Monitoring+and+Alerting.pdf?version=1&modificat…
    Best Regards,
    Tanmeya

  • I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

    I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

    Instead of getting annoyed, read the User's Guide and try basic troubleshooting.

  • Issue while creating Component Based Message Alerting in PI 7.31 Dual Stack

    Hi,
    We tried to implement Component Based Message Alerting following the steps mentioned in the below blog.
    http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/03/25/michals-pi-tips-component-based-message-alerting
    Ours is PI 7.31 dual stack. However, after setting up the job with my own user id, I am getting the below error inside the log of Jobs tab:
    javax.jms.JMSSecurityException: You do not have permissions: action alertingVP.queue and instance:name alertingVP.queue
    action consumer
    instance jms/queue/xi/monitoring/alert/ALERT-TO-MAIL
    Please let us know what permission is required to set up the job.
    Thanks,
    Rahul

    Hi, 
    Now I am able to receive alert in my mailbox. But it's coming with improper content.
    I have set up the job at an interval of every 2 minutes in NWA, and in case if only 1 message fails in IE, in ideal case, I should receive only 1 message details in alert.
    However, in every 2 minutes, I am receiving junk data and the number is increasing for the particular scenario for which the alert has been created. Also the Error Category mentioned is showing improper.
    But in table SXMSALERTCONTENT I am able to view only the newly added failed entry.
    An erroneous alert email content is pasted below:
    63 messages failed for "Test_XXX" on "af.s0i.saps0i"
    Root cause: -1
    To navigate to the failed messages in the local message monitor use this link
    The first 1 messages of that data collection:
    "AdapterNamespace": "http://sap.com/xi/XI/System",
    "AdapterType": "File",
    "Channel": "FileSender_XXX",
    "ChannelParty": "",
    "ChannelService": "XXXXX",
    "Component": "af.s0i.saps0i",
    "ErrCat": "",
    "ErrCode": "",
    "ErrLabel": "-1",
    "ErrText": "Configured source directory '\\Outbound\\XXX\\CREMAS' does not exist",
    "FromParty": "",
    "FromService": "XXX",
    "Interface": "Z_CREMAS_SUSMM.CREMAS03",
    "Namespace": "urn:sap-com:document:sap:idoc:messages",
    "RuleId": "3a64dd6e1b1d3e58aff62ea70c97cb80",
    "Timestamp": "2013-02-01T09:43:23Z",
    "ToParty": "",
    "ToService": ""
    The failed message however do not relate to the 'source directory does not exist' issue. Please help.
    Thanks,
    Rahul

  • I can't find the new text message alerts for every person - help!

    Hi.
    As I frequently check the Apple website, I visited the iOS 4.2 download site. It said that you get custom text tones and 17 new sounds.
    So I updated to get the new things. But then I checked Settings to see the new alerts and what they sounded like. But I only found the same old Tri-tone, glass, horn, etc. There were no new ones.
    So I checked Phone, but there was no custom text message alert option.
    Am I the only one experiencing this problem? I have an 8 month old iPhone 3GS and it works great.
    I am also suspecting that it could be an iPhone 4-only deal.Which would be ridiculous because I would be really upset to see that Apple only cares about the people who cash in their hard-earned bucks on every new Apple gizmo they set eyes on.
    Please help! Thanks in advance

    I understand that it has been answered and has been said that it is for the iPhone 4 only; however, on their website it does not specify that, this is exactly what it states:
    "Messaging with text tones
    Know who’s texting without looking at your screen. Choose from 17 new alerts and assign custom tones for people in your contact list.
    iPhone only."
    If I am not mistaken, "iPhone only" includes every iPhone generation to which 4.2 can be installed in, not just the iPhone 4. If it is in case for the 4 only, then they should have specified and not made a misleading advertisement about it since every iPhone user has been waiting for new tones of any sort since the first iPhone ever came out. Making it available for only iPhone 4 users is a very fowl move from Apple since it's such a basic thing to the phone itself. They should address the issue correctly and make it available for the 3G and 3GS.
    Apple just asked for angry customers with this one and they definitely know it's not fair.

  • How to exclude synchronous interfaces from component based message alerting

    Hi Pi experts,
    We are configuiring Alerts in PI 7.3 single stack.If we have 'n'number of interfaces, and if we configured general alerts for all.How to exclude synchronous interfaces in that.Alerting is for asynchronous interfaces only.How to do that.
    Please advice on this.
    Regards
    Suneel

    Hello,
    >>What are your approaches regarding this requirement in the context of java-only?
    I would suggest you to schedule jobs like this:
    Customize Alerts Using Job in PI 7.31/PO
    >> alerts are consumed according to the given interval and not in "real time" when error occurs, today solution using BADI is "real time" - if possible I would prefer "real time" solution
    Check this:
    Michal's PI tips: How to trigger an alert for Component Based Message Alerts (CBMA) via "API" ?
    >>an separate service determine the actual alert count would be helpful to provide the correct value for maxAlerts, this have to be called beforehand
    I haven't tried it but i think u can do that, since these consumers are nothing but JMS queues only so i think there will be a method to read number of alert counts.
    >>In history I saw emails generated by the standard alert consumer which only contain details for the first alert, in my case I need details especially the message id for all errorneous messages
    If ur max alert parameter is greater than 1 then u should see multiple alert text  (along with message id and other details) in ur email message.
    Thanks
    Amit Srivastava

  • Java-only, Component based message alerting - loopback to sender system

    Dear guys,
    we are using the alert framework availbale on PI 7.11 to notify the sender system if there is an alert for specific interfaces. In that case a customer function module is called giving the message id of the request message (message is sent via ABAP proxy). As a result the according entry in customer table is updated.
    The implemntation is based on the BADI ALERT_MODIFY_TEXT and uses the standard function module ALE_BAPI_GET_UNIQUE_RECEIVER to determine the system /rfc destination to send the alert notification.
    This solution works fine so far.
    As PI 7.11 dual stack is not the latest release, we are thinking of upgrading to current PI/PO release. In this context also shift to java-only installation is contemplated which will need an alternative solution for the described alert/error notification loopback.
    Are there any possibilities analog to BADI to implement such a solution?
    What are your approaches regarding this requirement in the context of java-only?
    Any help/thoughts appreciated.
    Best regards,
    Jochen

    Hello,
    >>What are your approaches regarding this requirement in the context of java-only?
    I would suggest you to schedule jobs like this:
    Customize Alerts Using Job in PI 7.31/PO
    >> alerts are consumed according to the given interval and not in "real time" when error occurs, today solution using BADI is "real time" - if possible I would prefer "real time" solution
    Check this:
    Michal's PI tips: How to trigger an alert for Component Based Message Alerts (CBMA) via "API" ?
    >>an separate service determine the actual alert count would be helpful to provide the correct value for maxAlerts, this have to be called beforehand
    I haven't tried it but i think u can do that, since these consumers are nothing but JMS queues only so i think there will be a method to read number of alert counts.
    >>In history I saw emails generated by the standard alert consumer which only contain details for the first alert, in my case I need details especially the message id for all errorneous messages
    If ur max alert parameter is greater than 1 then u should see multiple alert text  (along with message id and other details) in ur email message.
    Thanks
    Amit Srivastava

  • Component based message alerting

    Hi,
    I am working on component bvased message alertig in SAP PI 7.4 (dual stack). As per the Michal's blog i have define everything in PI.-
    http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/03/25/michals-pi-tips-component-based-message-alerting
    Also i have configured Configuration -> Infrastructure -> JAVA System Properties -> XPI Services: AF Core  -> and choose tab Services .
    Set the value of the alerting.target service property to 1.
    and alerting.isActive (value true).
    But still i am not getting mail in mail box.
    When i check the log viwer i found two logs saying:
    Job AlertConsumerJob (ID: 5fe771e0ec86100082e50000002ab43a, JMS ID: ID:1344010011108-000000008399) started on Thu, 5 Jun 2014 03:52:43:011 EDT by scheduler: c0000173a37f11e2b6ab00237d240438
    Job AlertConsumerJob (ID: 5fe771e0ec86100082e50000002ab43a, JMS ID: ID:11344010011108-000000008399) ended on Thu, 5 Jun 2014 03:52:43:044 EDT
    Could some body help me in this .
    Thanks,
    Anurag

    Hi Anarug,
    I am not sure whether it is solved.
    From the log entry from the AlertConsumerJob, it seems that this job is running fine,
    but it is not finding any alerts.
    That means probably, no alert events are thrown by any rule.
    So you should focus on that part first and see if you have any aggregated alerts in a job run.
    I had some strange experience with Alert Rules that did not have all Message Statuses checked.
    As soon as you uncheck any of the Message Statuses in the rule (for example any unusual adapter technology), the rule will not work.
    This is a bug in my 7.31 system and I am just trying to fix it using SAP Note 1968989.
    Please check if this Note might fit your situation.
    Anyway, try to use a DEFAULT-RULE, which you can create in the ID by checking the box "create default rule" when defining a new alert rule.
    Other things to check:
    - are you using Integrated Configuration or generate at least errors in the Adapter Engine?
    For errors in the (ABAP) Integration Engine, the whole story is similar but completely different.
    Cheers, Jochen

  • Personalized txt message alerts based on who is sending it?

    Is there anyway on the Iphone to set different text message alerts based on who is sending the text? I am a sysadmin and currently I have our servers sending txt message alerts to my corp phone. I'd like set it to send to my iphone with the caveat of giving a different alert sound then other text messages sent by other people.
    I just got my iphone yesterday, so please forgive me if there is an easy solution.

    In short, no. You can change ring tones for various people however; no individual group alerts.

  • Link button in Messages/Alert Overview

    Hi,Experts
    I am sending an alert message to Messages/Alert Overview ,in that if i click the link button i have to get the user defind form.Can any one can help me regarding this.
    Thanks & Regards.
    Rajesh.

    Hi Rajesh........
    Is that your customised form?
    If yes then you have to manage it in your Source code itself.........
    Regards,
    Rahul

Maybe you are looking for