Message app - owner avatar picture not shown

doesnt work in safe mode either. it´s clear intallation, but to be sure i cleared data in contacts and mesasge app too. but with no result.

I got the same issue bro and i just found the solution for it,apps, all apps, clear all at the 2 contact apps that are shown, re sync ur contact list, set up ur avatar photo ONLY dont set the phone number,and ther u go it will be shown again.      hope that helps, worked for memrnino wrote:
Can you fix this issue? It happened with 5.0.2, it happens now with 5.1.1. Owner avatar is not shown even if it's set. Tested after repaor with PC companion.  

Similar Messages

  • After upgrading my iphone 4 to io6 i started loosing the historical sms messages from some senders including new ones received as soon as I open the message app. I am not happy with io6. please advise how i could downgrade to io5.1.1.

    After upgrading my iphone 4 to io6 i started loosing the historical sms messages from some senders including new ones received as soon as I open the message app. I am not happy with io6. please advise how i could downgrade to io5.1.1.

    I have read a number of other threads regarding the loss of Messages, however, I am not aware of the reason it is happening. Check on the right side of this message under more like this and see if you can find an answer.
    As to your question about downgrading software, there is no Apple supported method for downgrading software.

  • Pictures not shown in albums (as per my folders) in Revel after 'access all media' ticked - sort it out Adobe!

    Hello,
    This is really frustrating after subscribing to upload all my photos to revel.
    After ticking 'access all catalog media' I have the following two problems:
    1. Pictures are shown individually in Revel, and not in their respective albums as per 'my folders' in organizer. Unless I create another new folder in mobile albums (another 50-plus!) - but why would I do that and create a lot of work?
    2. Not all pictures have imported, especially the most recent pictures haven't uploaded.
    I have updated to 12.1 Elements - I am using PC Windows 7, and Adobe Revel app on Android.
    This is annoying please help Adobe!
    Rich

    Hi Rich,
    Answers to both of your queries are available in step #2 under section "How to get started with Mobile albums?" of my blog: Photoshop Elements (PSE) knowledge base.: Mobile albums and Elements Organizer
    Please let me know if you still have queries.
    Kind Regards,
    Surendra

  • Employee picture not shown in ESS

    Can someone please help us? We use HR 46C. It is not possible anymore from a certain patch level to use a file store in archivelink, therefore we have configured an HTTP content Server. This works fine, we can upload pictures without any problem. When we test it in transaction PA30 on our SAP system it works fine. We see an photo for every employee for which we uploaded an picture.
    However when we use the ITS server to run transaction PZ01 (or PA30) we won't see a picture. After some investigation I found the HTML part of the service file where picture should be shown. This is in the HTML template of PZ01 'SAPMPZ01_500_CORE'. In here the following code is shown:
    `if (SHOW_PIC == "1")`
      <td width="140" valign=top>
        `<!-- Foto if desired and available -->`
        <table width=140 border=0 bordercolor=black align=right>
        <tr>
          <td valitn=top align=right><IMG width="140" SRC="`wgateURL(~OKCode="DISPLAY")`" alt="`#Foto`"></td>
        </tr>
        </table>
      </td>
    `end`
    This code will only be executed when teh variable 'SHOW_PIC' has the value '1'. I already took the ocde outside of the if command. Then it shows an border where the picture should be shown however the URL is incorrect so it only shows an red x.
    Is there anyone who knows if we forget to configure something so that the picture will be shown? Where will the variable SHOW_PIC be filled for example???
    We would be VERY thankful if someone could help us!
    Kind Regards,
    Nico van der Linden

    Hi Sudhir,
    thanks for you reaction (and I am sorry for the late response. The problem is solved. It appeared to be a stupid authorization problem.
    Kind regards,
    Nico van der Linden

  • Error message: apps installed on ipad not recognised when trying to sync

    I am getting an error message when trying to sync saying itunes cannot sync apps to my ipad because the apps installed could not be determined. Does anybody know how to fix this?

    were these bought with the same applie id?  when you are in the store, scroll to the bottom and confirm that you are logged in as the user you need to be.
    Otherwise, do a reboot.  That sometimes clears stuff like this up.  Press and hold both the home and sleep buttons until the apple logo appears.  ignore the red slider.

  • Picture not shown in report when user not logged on.

    Scenario (also described in thread: http://technet.oracle.com:89/ubb/Forum81/HTML/000726.html)
    I create a table mypics:
    title varchar2(100), mypic varchar2(100). I create a Portal form that uses file upload on mypic. The form will put the picture into some table...
    I then create a report with the following sql:
    select title,
    '[IMG SRC="'| | decode(MYPIC, '', PORTAL30.wwctx_api.get_image_path | | 'noimg.jpg',
    owa_util.get_cgi_env('DOC_ACCESS_PATH') | | '/' | | MYPIC) | |'"]' MYPIC
    from SCOTT.mypics
    (replace [] with <>)
    The report do not show the picture if the report is added as a component in a content area, and the user is not logged on.
    (Workarounds are to use portal pages instead i think).
    But still, the problem probably has to do with some granting ?
    Terje.
    null

    Hi,
    If this is the case, then first of all you have to make your objects language dependant. Then load the data for English (If you have), German etc with 0LANGU as the key of the object.
    Then only you can view the descriptions/names/texts etc. in the various languages.
    Hope this helps.
    Regards,
    Yogesh.

  • Bmp pictures not shown in ichat

    My friend keeps sending me bmp pictures over ichat, but they only show up as that page icon. I can drag it to the desktop, get info, and add the bmp extension to it, and it opens in preview fine, but it just doesn't show up in ichat. Is this a bug, or does ichat just not support bmp?

    does anybody else ever get bmp files over ichat? I'd like to know if there's a way to get them displayed inside the window without having to do all the renaming and opening in an external program

  • Please help - Messages app, Facebook and Whatsapp not opening

    Hi all,
    I have an iPhone 4S that is nearly 2 years old. Software is up-to-date.
    I've been having problem with it for a while, the home button needs to be pressed several times before it works (sometimes), the button at the top works intermittently, very difficult to take a screenshot, and it is impossible to hold it down in order to switch it off.
    These problems weren't the end of the world til this afternoon, where I get a text and can't open Messages. Normally what I do is try again in an hour and all is well. I have noticed the same with Facebook and Whatsapp, but others are working fine. I've done the force-quit of applications thing in the multitask view, but this hasn't helped. Can't turn it off and on again unless I wait for the battery to drain.
    Anyone with the same problem, or suggestions?
    Is it time for me to get a new phone, iPhone or otherwise?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If the buttons are not functioning properly, take the device to Apple for evaluation and possible replacement.

  • I see a message in notification center but can't read it in the message app because it is not here.

    Just "received" a message from a friend but i can't see it in the message application. There is the red "1" digit upon the message icon and i see the message in the notification center so i don't understand how to solve the problem.
    Cheers.

    The next steps in user troubleshooting are a restore from backup, and if necessary a restore as a new device, not from a backup. Perform what is necessary.

  • Purchased app and it has not shown up on my ipod touch.

    After purchasing app, it has not popped up on my ipod touch screen.

    Connect the iPod to your computer and select it on the left-hand sidebar of your computer's iTunes (if you have iTunes 11 on your computer then you can enable the left-hand sidebar via control-S on a Pc, option-command-S on a Mac). Then on the right-hand side select the Music tab and select what you want to sync.
    Syncing music : http://support.apple.com/kb/HT1351

  • Pictures not shown in adobe digital editions

    well, i basically borrowed a book and it doesnt show the images. it is completely blank where the picture should be.
    any suggestions cause its my first time using editions. thank you

    Hi Rich,
    Answers to both of your queries are available in step #2 under section "How to get started with Mobile albums?" of my blog: Photoshop Elements (PSE) knowledge base.: Mobile albums and Elements Organizer
    Please let me know if you still have queries.
    Kind Regards,
    Surendra

  • Cc cleaner has altered page layout, missing buttons, pictures not shown with txt but below, certain pages also not now intertactive..cannot scroll and over buttons and click to enable choice. help to

    Hi, Please help.
    I'm currently using Firefox v4.0.1, which I like and am happy with, as it allows me to use my Kaspersky link filter and virtual keyboard.
    Anyway, I recently decided to clean my registry and history using cc cleaner.. I did not back up as I had never experienced problems before. Once cc cleaner had finished and I opened Firefox I noticed that my two home page layouts had altered. The Supanet home page is now all disjointed, buttons are scattered to the left and right of the page, where once they where side by side, all of the images and text seem to be beneath each other and instead of one page i now have to scroll down and down to the full page, all text and image seem to be left margin.
    On the google home page certain buttons are there but the text within has disappeared, although the buttons work, a search for Mail online through google..(or Supanet home page) is not a problem, however, once we arrive at the site it pretty much displays the info in the same layout/manner as the Supanet hompage. Further more certain buttons on other sites are no longer interactive..eg, Asda voucher print out. i do not wish to update to other version of firefox as i would lose Kaspersky buttons..so please help..I've tried everything..even re installing version 4.0.1..Help, I now it must be simple..but I'm not a techie!! Many thanks!

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    Please update Firefox to the latest version via "Help > About Firefox" or "Help > Check for Updates"<br />
    The Firefox Firefox 4.0.1 version that you currently run is no longer supported with security updates.
    You can find the latest Firefox release in all languages and for all Operating Systems here:
    *Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html

  • Gray image not shown correctly in photo app

    Hi, in my iphone App, I create a Gray CGImage. Some code is here:
    colorSpace = CGColorSpaceCreateDeviceGray();
    if (colorSpace == NULL)
    fprintf(stderr, "Error allocating color space\n");
    return NULL;
    CGDataProviderRef dataProvider =
    CGDataProviderCreateWithData(NULL,
    myimagebuffer,
    bitmapByteCount,
    NULL);
    CGImageRef cgImage = CGImageCreate(col,
    row,
    8,
    8,
    col,
    colorSpace,
    kCGImageAlphaNone,
    dataProvider,
    NULL,
    false,
    kCGRenderingIntentDefault);
    And then I use this CGImage to make a UIImage. This image shows OK in UIImageView. I also use UIImageWriteToSavedPhotosAlbum to save this gray scale image to photo album. But when I open iphone native Photo app, this image is not shown correctly.
    Anyone has the same experience?
    Thanks,
    fm

    Post Author: JeffI
    CA Forum: Older Products
    Because I am sure other people will encounter this issue, I will post the solution here...The issue lies in what program is associated with .bmp files. In my specific case the customer had PhotoSuite 4 by Roxio associated with opening bmp files.  I am not sure exactly why (perhaps it doesn't support drag-and-drop?) but if you create a .reg file and import this it should fix the problem. The bolded part is the important part. Windows Registry Editor Version 5.00&#91;HKEY_CLASSES_ROOT&#93;&#91;HKEY_CLASSES_ROOT\*&#93;"InfoTip"="prop:Type;DocAuthor;DocTitle;DocSubject;DocComments;Write;Size""QuickTip"="prop:Type;Size""AlwaysShowExt"="""TileInfo"="prop:Type;Size"&#91;HKEY_CLASSES_ROOT\.bmp&#93;@="Paint.Picture""PerceivedType"="image""Content Type"="image/bmp"&#91;HKEY_CLASSES_ROOT\.bmp\OpenWithList&#93;&#91;HKEY_CLASSES_ROOT\.bmp\OpenWithList\MSPaint.exe&#93;@=""&#91;HKEY_CLASSES_ROOT\.bmp\OpenWithProgids&#93;"Paint.Picture"=hex(0):

  • Sent mail not shown in Hub or sent folder

    Hi All. Having problems with my Z10. When I send an email from the hand set the message disappears once sent its not shown in either the Hub or sent folder so end up with no record of the message sent. Any help would be appreciated.

    If you go to Settings -> Accounts, edit the email account, scroll all the way to the bottom and hit the 'Edit Folder Settings' button you will be able to select your 'Sent' folder.
    If you've been helped click on , if you've been saved buy the app.
    Developer of stokLocker, Sympatico and Super Sentences.

  • Missing a built in message app

    a brand new ipod touch 4th generation is missing a standard built in message app....not sure how to retrieve..not in app store

    You're welcome. Check out the Apple article below for upgrade instructions.
    http://support.apple.com/kb/HT4972
    Stedman

Maybe you are looking for