MESSAGE:Before 2011.09.02, rental unit is not in status Unoccupied

TCODE:FOV1 ， have a message.
MESSAGE:
Before 2011.09.02, rental unit is not in status Unoccupied
Message no. 62553
Diagnosis
As a requirement for your entry, the rental unit must be in status Unoccupied on 2011.09.02. However, this is not the case.
System Response
The system does not accept your entry.
Procedure
Correct your entry.
who can help me ?

HI,
if the object is  already assigned to other contract, if you are trying to assin this object to anothre contract, please make tick or select the informational tick mark in the object in the contract.
contract allows you to assign the object multiple contract.
thanks
Jilani

Similar Messages

  • I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears.

    I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears. What can I do to remove this error.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below on this page to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    { launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; crontab -l 2> /dev/null; } | open -f -a TextEdit 
    Step 4
    ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • I get a message "before viewing pdf documents i must launch adobe reader and accept end user licence

    I get a message "before viewing documents in this browser you must launch adobe reader and accept the end user licence agreement then quit and relaunch the browser". How do I do this?

    Just launch Adobe Reader. Assuming you are on a Mac, all apps are launched from Applications.

  • How to send a warning message before closing soft via X of the title bar

    With labview 8.2:
    I would like to send a warning message before closing my soft when the user press the "X" of the title bar. Is it possible to do that without a Windows dll?
    Thanks a lot,
    Daniel.

    Gerd,
    I think a filter event for 'Panel close?' is more appropriate because you have the possibility to cancel the event or continue the event.
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • Edit XML payload of messages before restart

    Is there a way to edit the payload of a message before to restart it?
    I allway get the following message: "you can only edit header/body parts"
    Thanks,
    Laurent

    No. But you can correct your mapping program (if this is at fault) and then when you restart the message the updated mapping program is used.
    If the problem is actually that the received data are incorrect then it is the responsibility of the sending application to resend the correct data.
    Regards,
    Thorsten

  • Why won't siri read back my messages before asking me to send?

    Why won't siri read back my messages before asking me to send?

    go to settings>general>siri >toggle it off and then on
    then try
    if problem continues
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. DONT CONNECT YOUR DEVICE TO A COMPUTER.

  • How to display a confirmation message before deletion

    Hi,
    I have an application and I want to display a confirmation message before people delete a record.
    The button on page 42 is number 90     "Supprimer cette fiche". It is a Submit as "DELETE_ALL". I have seen that the delete buttons are redirections to the url javascript:confirmDelete(htmldb_delete_message,'DELETE');, but I cannot use this as my button is not a redirection, but a submit.
    http://apex.oracle.com/pls/otn/f?p=4550
    Workaspace : ESPACE2008
    User : guest
    password : acdc2009
    Name of application is Activites
    Thank you for your kind answers.
    Christian

    Hi Christian.
    You can use the same logic for your own processing logic.
    the syntax is...
    javascript:confirmDelete(htmldb_delete_message,'YOUR_PROCESS_NAME');Replace 'YOUR_PROCESS_NAME' with the name of your page process that handles the bulk delete. Don't for get the single-quotes either side of your process name.
    Hope this helps.
    Simon

  • Error message: Before proceeding you must first launch Adobe Acrobat.....

    When I try to open a PDF on a Web page I get the following message:
    "Before proceeding you must fist launch Adobe Acrobat and accept the End User License Agreement"
    I Installed the Adobe Acrobat XI pro an my MAC and after registration, the programm runns perfect. How can I solve the above mentioned problem?

    Open it again and see if you get a request to accept the EULA. If not, then go to the help menu and run repair, followed by updates.

  • Getting Accessiblity Error Message before Recording Software Simulation...

    In Captivate 7, I go to start a brand new software simulation (chrome screen) in OSX and I get the following error message:
    Before recording application applications, select 'Enable Access for Assistive devices' in 'System Preferences' > 'Accessibility'.
    The pics below show the red screen capture box and the error I get when I try to capture when trying to capture the screen. Also included is a pic showing accessibility is enabled.
    I have no idea where this is coming from.

    ...and here's the answer:
    http://captivatecrazy.blogspot.com/2014/01/record-new-software-simulation-in-adobe.html

  • Siri is not what it claims so far. poor recognition anyone else not happy. previous question on why siri wants to send a message before i get a chance to review siri type o's

    Siri wants to send my messages before i get a chance to review it can i slow siri down before she sends my message?

    First if you were talking to a Uverse rep about transferring ownership of account and then inquired about phone service the only thing that could be offered would be Uverse VoIP. Calling 1-800-288-2020 is also calling the Uverse division of AT&T, again VoIP. POTS is not Uverse, a separate department with a separate bill, and no bundle discount for combined services. The install would be handled by the outside lineman, not a Uverse tech. If chose the self install the lineman would get dial tone to the NID, you would be responsible for wiring NID to house wiring as Uverse Max Plus 18 or Max Turbo 24 should be a dedicated home run from NID to RG not touching the house wiring. A full tech install would be billable as is a tech assist service call to connect wiring. Lastly AT&T as stated desire to be all IP by 2020, expect POTS and DSL CO based products to be discontinued in near future.  Therefore you may have a better chance at a POTS line by going 3rd party provider. And yes if VOIP is active expect to pay for service till such time as CANCEL VOIP service or number is transferred. These are my thoughts and do not represent any official response.

  • Deleting Mail Messages Before They Open

    Is there a way to delete an email message BEFORE it opens (to avoid potential viruses)?

    This help doc http://support.apple.com/kb/ta21164?viewlocale=en_us explains that there is a difference between looking at a message in the preview pane and actually opening it. If you're only using the preview pane and delete it, it was never actually opened.

  • Mail keeps sending messages before I'm ready

    My desktop Mac (Intel) keeps sending my messages before I'm done with my mesage

    This smells like a permissions issue, and it cannot be fixed repairing permission with Disk Utility.
    Well, I looked up the MessageUidsAlreadyDownloaded
    files to see if they were being written to and saved
    (updated). Basically, I was just checking the last
    saved dates on them.
    And the result of looking at them was?
    And there were only 3 POP folders
    where these MessageUID files were in.
    These files are what Mail uses to keep track of which files have already been downloaded. There should be either one or two of them in each POP account. What you're saying indicates clearly that there is a problem with these files.
    Does the multiple downloads problem happen with all accounts or only with the one that lacks the MessageUidsAlreadyDownloaded file? -- sorry if you already knew this, but just to be sure, to know which account a "POP-" folder is associated with, just look at the folder name. It's formed by appending the account username and the incoming mail server to the account type (POP).
    In the Finder, select the account folder that lacks a MessageUidsAlreadyDownloaded file, and choose File > Get Info (⌘I). Under Ownership & Permissions, are you granted "Read & Write" access. Expand Details. Are you listed as the owner of this folder?
    Note: There are several bugs in the Finder that make troubleshooting this kind of problems harder that it should be, and you may end up reading wrong information and/or incorrectly "fixing" non-existent problems if you play too much with it. If your problem ends up being a permissions issue, are you willing to troubleshoot it using the CLI in Terminal?

  • How do I delete a voice mail message before listening to the message ?

    How do I delete a voice mail message before listening to the message ?

    Hi ,
    I see what you mean.This cannot be deleted without calling the voicemail.
    You can remove the voicemail if you no longer want this.
    Or ring the voicemail from a different number and delete it this way.
    Thanks.

  • I have problem with my contacts.  I can't send message if the contact didn't send me a message before.  How can I add new address?

    i have problem with my contacts.  I can't send message if the contact didn't send me a message before.  How can I add new address?

    Hi tizac,
    You will want to add them to your Contacts. 
    There's a "+" button at the bottom of the contact list on the left to add a contact.
    If you need to add the email address or phone number to an existing contact, there's an Edit button at the bottom of the contact info (on the right).
    Once you have the contact email address or phone number you want to message to, scroll all the way down to the bottom of their information and there are options to:
    Send Message               FaceTime
    Share Contact             Add to Favorites
    Of course choose "Send Message" to send an iMessage to them and you will start a new chat.  You will be given the options of how to contact them, via phone number (if they are on an iPhone) or email (if they are on an iPod touch or iPad).   They do need to be signed up for iMessage or it won't allow you to send.
    ivan

  • Force to check all the message before post in MIGO transaction

    Hi Expert,
    We have a requirement to display all the message before post this document with clicking the "Check" button. Actually our requirement is very simple, that is system calls "Check" function automatically after click the "Post" button.
    In some case, some operators donot want to click "Check", before they click "Post" button. So they will miss some important information.
    Thanks

    Hi Paul,
    Thank you replied, I think that will be one only solution after i debuged it.
    Thanks

Maybe you are looking for