Message category INFREC and Basic Type INFREC01

Hi,
Do any one know how to send a material condition record to other SAP system through ALE.
I am trying to find what what is teh Message tye used to send.
I am using the Message category INFREC and Basic Type INFREC01 to send info record, however it is not send A017 and KONP entres of info record.
Please let me know if any one know Basic Type which containes A017 and KONP table fields
Bhima

Hi
use Message COND_A to transfer the conditions.
Hope this helps.
Best Regards, Murugesh

Similar Messages

What is the message type and basic type used for catsdb in idoc help me

what is the message type and basic type used for catsdb in idoc help me
ANY IDOC FOR CATSDB PLEASE TELL,
Regards,
Jagrut BharatKumar Shukla
points will be awarded

Hi,
Check these message types.
ATT_ABS_WITH_COST and WORKSCHED_WITH_COST.

LSMW with IDOC Message type COND_A and Basic type COND_A01

Hi Sap All.
in my project we using the LSMW with IDOC Message type COND_A and Basic type COND_A01 and now the requirement is to know the list of the tables which will be updated when i do the LSMW Migration with this IDOC Basic type.
i have tried to know the list of the tables updated by entering into the transaction we30 and looking at the segments E1KOMG,E1KONH, E1KONP,E1KONM,E1KONW and i found that the following below are the list of tables which gets updated when i populate the data into IDOC Message type COND_A and Basic type COND_A01.
KOMG,KONH,KONP,KONM,KONW.
please correct me if iam wrong.
regards.
Varma

Hi Varma,
The tables mentioned by you definitely get updated, i guess you can add KONV to the list too, but to be a 100% sure, enable SQL trace and process an IDOC. Then you can look for Insert/Modify/Update statements to get a list of the tables that get updated.
Regards,
Chen

I want the message types and basic types for catsdb table

i want the message types and basic types for catsdb table

Hi Jagrut,
Message Class is "LR".
Reward points, if helpful.
Regards,
Atin

I upgrade to ios7 today and now when I try to speak out a messae in messages or use siri niether works siri says it cannot take request right now, and messages just clocks and never types out the message, what happened?

I upgrade to ios7 today and now when I try to speak out a messae in messages or use siri niether works siri says it cannot take request right now, and messages just clocks and never types out the message, what happened? Has anyone else had this issue today?

What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

IDOC question on Message type and Basic Type - Partner Profile

Hi all,
I am wonder if I can post any IDoc question in this right forum/module. If not please direct me to the right forum/module. I am a newbie in IDOC setup.
My question is about the setup of Partner Profile creation (WE20).
When creating a new partner, for example with partner type LI, I notice there is outbound parameter and inbound parameter.
Questions:
1 u2013 It makes sense to have only one message type record appear in EITHER one of these two tables. I notice that some partner in my system has message type record exist on both the inbound and outbound parameters table, why system allows? What is the business rational?
2 u2013 May I have a list of standard SAPu2019s Message Type object of its usage description, and its allowable Basic Type (ie. IDOC TYPE). Basically a website to describe their (i.e. Message type and its Basic Type) business usage.
Thanks.
tuff

Tuff,
Below are my thoughts,
There is a partner sing partner type LI. This partner in the WE20, has one record (i.e. with Message Type ORDERS) exist in the Outbound Parameter table. This partner also has 4 records (i.w. with Message Type DESADV, INVOIC, MBGMCR, and ORDRSP) exist in the Inbound Parameter table. So my question is what is the business rational behind this kind of setup. Because I am confuse when come to create a partner profile, whether I need to create a message type in Inbound Parameter table or Outbound Parameter table, or I need both.
OK, so looking at the above example, you have an orders message type(This is for creating an order) in the outbound, this means that you are sending out an IDOC(purchase order for ex) to this partner, so that this partner can create an SO in his system and fulfill your order.
Now you also, mention that you have other four Message types for the same partner on the inbound, now let us look at the above scenario, you have asked your partner to fulfill the order, i guess you would like to get a confirmation from him/her if the order was created or not in his/her system and how and when is he/she going to fulfill your order requirement. This he/she does by sending an response to your order - ORDRSP.
And when the partner is ready to ship your order to you, he/she sends out a Advance Shipping Notice - ASN via the IDOC of message type DESADV.
Finally and most importantly , he/she will send you the invoice - INVOIC for the order.
In general, you interact with your partner via Business Docs - Order, Delivery, ASN, Invoice etc, so whatever document come from your partner - ORDRSP, INVOIC etc will be on the inbound profile of the partner. Whatever docs that you send ORDERS, ORDCHG etc etc will be on the outbound profile of the partner.
2 - Bascially I would like a reference in any website that allow me to choose which message type is best use for my partner profile, so that I don't have to reinvent.
Well, there is no choice of choosing/best message type for a given requirement - So for sending an Invoice the message type is INVOIC, ORDERS - For order creation, ORDCHG for order change etc. However the IDOC type, is some thing that you can choose, for Ex: ORDERS01 - ORDERS05, these are the IDOC types that are available, so if you are interacting with a partner who are running an old version of SAP and their system has only upto ORDERS02 in their version of SAP then you would use ORDERS02.
Regards,
Chen

IDOC and Basic Type

Hi Experts,
I have a basic type that I will use in my IDOC with no process codes(attached FM) that will create a document (e.g. orders, deliveries)... and I have found out a BAPI that I can use in creating the document.. the question is.. do I still need to CALL FUNCTION 'IDOC_WRITE_AND_START_INBOUND' after calling the BAPI to create the document?
Thanks!
Nosaj

Hi,
Thanks. To clarify.. first I will receive an IDOC coming from XI this IDOC containes the planned orderse that I will create in SAP.
Question: Can one IDOC contains a lot of planned orders to be created? Meaning that I have created a copy of segment E1PLAFL because this segment can only acquire a maximum of 1 data record... so i copy it and customize it to acquire more than 1 data records.....?
Then the Basic Type: LOIPLO01 does not have a functionaly of creating planned orders.. so I will use a BAPI in creating the planned orders....
Question: Since I will be using a BAPI to create the IDOC.. do I still need to call the function module ive said (WRITEIDOC)?

My ipod touch 4G won't sync with itunes. when i click sync, a little message comes up and basically says "itunes won't sync because it can't start". also, say i delete "pocket god" which is about 50mb, it will delete the app but won't free the space.Help?

Help me?? Please?!
I don't use wi-fi sync. i use the cord...

it doesn't matter anymore. for some bizzare reason, it just synced properly!!!!!!!! I swear, there is something weird. anyways, I can update my ipod like i came on the computer to do!! honestly, this is weird. i doesn't matter, if it breaks tonight, i have everything backed up finally and i can get my dad to take me to get a replacement tomorrow. THANKS for replying. Sorry for wasting your time...

Item Category and MRP type for material is not allowed

Hello all,
I got a Error Message:
Transaction Z113 is not defined (Message no. V1347)
Diagnosis
This combination of item category Z113 and MRP type for material is not allowed.
System response
The system does not allow further processing of this item.
Procedure
Check your entry.
You can display the combination defined in table TVEPZ, which controls scheduling line category determination, and change it as required if you have the authorization to do so. The MRP type for the material may be changed in the material master.
The SD Configuration seems all right, I have:
Sls Doc Type (VOV8) ZA9 (no delivery type assigned)
Item Category (VOV7) Z113
Assigs Sls Doc & Item Ctgry (VOV4) ZA9/ZNOR/blank/blanl/Z113
ZNOR = Std Item-Av. chck Del
ZNOR defined in MM03/Sls Org 2
Define Schedule Line (VOV6) = Z7 (without delivery)
Z7 has FLAG on Prod Allocation
Assign Schedule Line (VOV5) = Z113/ND/Z7
At table: TVEPZ
I have the entry: Z113/ND/Z7
Guys, what would?
Please help me out because I am stuck in this issue.
Thanks a lot,
Barbara

Barbara, this may be tied to Strategy Group on the Material Master (I can't read enough into the detail)
Item Category determination + MRP Type for your schedule line type ties to a Sched. Line category(this you know)
New Rqmts class gets tied to a Rqmts Type
New Rqmts Type gets assigned to rqmts class
Strategy, assign the Rqmts Type to it
Strategy Group, Assign the Strategy to it
MM02 [MRP3 view] strategy group should be the one that ties together (all the other ties
It may be something in this area that you need to trace through ?
Bill

Item category (Customized )ZJT1 and MRP type for material is not allowed

Hi Guys,
When i try to create the order i see the error as item category and MRP type of the material is not allowed.
I checked in Vov5 table, i could observe that Schedule line category is maintained.
Could you please help us in resolving this..
Thanks and regards,
Rahul

Hi,
Please assign the Item Category ZJTI and MRP type (for eg: PD) assigned to the schedule line category in IMG under Sales and Distribution--> Sales ---> Schedule line -->Assign schedule line
Hope this resolve your issue
Regards,
KrishnaO

EXTEND BASIC TYPE HRMD_A FOR TRANSFER IDOC DATA (HR MODULE)

Hi,
I'm trying to various infotype 2001,2002,2006 ecc to another SAP system via ALE and since they are not part of message type "HRMD_A" I have created the extension ZHRMD_A06. I've already created the new segments(we31) and put these segments (with names Z1P2001, Z1P2002 ecc ecc) into the extension(we30). And I've assigned the extension to the message and basic type (we82).
The new segment are processed correctly in the idoc creation via transaction PFAL, but via transaction BD21 i meet the abend message : B1 070 - Internal Error : program....command... for argument Z1P2001 (for example)
In other words, BD21 do not process the custom segment but the PFAL yes...how it is possible?
I've activate the change pointer in every customizing table intersting.
Many thanks in advance for any reply
Achille

unfortunately, the standard do not provide the infotypes for the HR-TM (Time Management), that
are between the structures i must send in the other system sap.
Ok, I have never delt with Time data in HRMD_A. Probably this is the case then
Ok,now i've checked the filter in BD64 and the tables BDCP2, CDHDR and CDPOS but it seems
all correct!!
By checking Filters I mean that confirm if you have added Time Infotypes there (just
making sure). If data is appearing in BDCP2 that means there is no problem in Change
pointer creation, Just ruling out possibility.
Try with an user exit it's a good idea, but why in the PFAL the idoc (with the custom segments)
is created without problems and in the BD21 no??? This is very strange
1) Well BD21 uses the Function module (TBDME for HRMD_A) which read change pointers and
create IDOCs. So now if you have extended Segment you have to add your population code
here somewhere.
2) PFAL is Push program, my assimption here is you have wriiten some piece of code to
populate Additinal segments data here? Otherwise IDOC will not be populated
automatically.
Let me know what you think.

Prob wth Extending HRMD_A06 basic type

Hi All,
I have some custom fields in PA0002 table. So i extended HRMD_A06 and in user-exits i am populating custom fields. Out bound side everything is OK. But it is giving 51 error in inbound side. Probelm with read_namtb subroutine. it is chking the custom segment in T777D table...
I am unable to solve the problem. Can anyone hlp me in this regard.

May be this helps you !!

FYI
SymptomThe standard scenario for the distribution of HR master data and organizational data via message type HRMD_A only covers a limited number of infotypes.
Additional standard infotypes should be distributed using a customer enhancement.
Other terms
PFAL, RHALEINI, HRMD_A
Reason and Prerequisites
In the standard scenario, only infotypes are distributed, which are required for a distributed HR in a non HR-system.
Solution
The following activities are required if standard infotype Pnnnn (with nnnn = infotype number) is to be distributed in addition.
Consider the restrictions at the end of this note in particular!
Release 3.1
1. Source code corrections:
According to the attachment (programs not contained in the standard system), repairs are necessary in the Includes LRHA2U06 and UP50RU01.
You only have to change Include UP50RU01 if it is a PA infotype.
If you also want to distribute infotypes starting with 2nnn or 9nnn, an additional repair in Include LRHALF01 is necessary. Remember that in this case the Infotype 2011 is stored differently than the other infotypes and cannot therefore be distributed.
Note that these changes are not contained in the standard system.
2. Customizing:
Transaction WE31 for Z1Pnnnn (in the sending system and the receiving system):
For each additional infotype, create a new segment type Z1Pnnnn (with nnnn = infotype number).
Transaction SM30 for table T777D only for PD infotypes (in the sending system and the receiving system):
For the entry infotype nnnn, enter Z1Pnnnn in field IDOC segment.
Transaction WE30 for ZRMD_A01 (in the sending system and the receiving system):
With Transaction WE30, create extension ZRMD_A01.
Create E1PITYP as a reference segment type, as child segments of this, the extension segment types Z1Pnnnn. As an IDoc type, create ZRMD_A01 for the basic IDoc type HRMD_A01 and extension ZRMD_A01.
Transaction WE82 (in the sending system and the receiving system):
The entry for message type HRMD_A and basic IDoc type HRMD_A01 is copied to a new entry with the extension ZRMD_A01.
Transaction WE20 (in the sending system):
In the sending system, for the partner number of the receiving system in the outbound parameters, enter ZRMD_A01 as idoc type in the line for entry message type HRMD_A.
Transaction WE57 (in the receiving system):
Copy the entry for function module name IDOC_INPUT_HRMD, basic IDoc type HRMD_A01 and message type HRMD_A, and enter ZRMD_A01 in the field extension.
As of Release 4.0B
1. Source code corrections:
Implement the attached advance corrections or:
Apply Hot Package for 4.0B: SAPKH40B02 or
Legal Change Patch for 4.0B: SAPKE40B02
The Include UP50RU01 must only be changed if it is a PA infotype.
Include UP50RU01 is not contained in the Hot Package and must be changed in accordance with the advance correction if the Legal Change Patch is not applied.
After applying the Hot Package (and manually repairing the UP50RU01) or the Legal Change Patch, only the Customizing activities are necessary.
2. Customizing
Transaction WE31 for Z1Pnnnn (in the sending system and the receiving system) :
For each additional infotype, create a new segment type Z1Pnnnn (with nnnn = infotype number). The function "Create by copying" can be used to reduce the work load.
Transaction SM30 for table T777D (in the sending system and the receiving system):
For entry infotype nnnn, enter Z1Pnnnn in field IDOC segment.
Transaction WE30 for ZRMD_A02 (in the sending system and the receiving system):
With Transaction WE30, recreate extension ZRMD_A02.
The linked basic type is HRMD_A02. Insert the new Z1Pnnnn segments as child segments of E1PITYP.
Transaction WE82 (in the sending system and the receiving system):
Copy the entry for message type HRMD_A and basic type HRMD_A02 to a new entry with extension type ZRMD_A02.
Transaction WE20 (in the sending system):
In the sending system enter ZRMD_A02 as an 'Extension' for the partner number of the receiving system in the outbound parameters in the entry message type HRMD_A with basic type HRMD_A02.
Transaction WE57 (in the receiving system):
Copy the entry for the FM name IDOC_INPUT_HRMD, basic type HRMD_A02 and message type HRMD_A, and in field 'Extension' enter ZRMD_A02.
As of Release 4.5A
Here, the Customizing activities described in Release 4.0B are to be carried out.
As of Release 4.5A, HRMD_A03 is used as the basic type and ZRMD_A03 is used as the extension type.
As of Release 4.6A, HRMD_A04 is used as a basic type and ZRMD_A04 is used as an extension type.
As of Release 4.6C, HRMD_A05 is used as a basic type and ZRMD_A05 is used as an extension type.
As of Release 4.70, HRMD_A06 is used as a basic type and ZRMD_A06 is used as an extension type.
Restrictions:
SAP cannot offer any support concerning compatibility with different releases for the additional infotypes of the enhancement in the standard system. For release specific changes to the infotypes of the enhancement a client-specific solution must be found (project solution).
Other known restrictions:
Known restrictions are listed here with possible solution approaches. If you should discover a restriction that is not yet documented, you can inform us of this via the R/3 SAPNet Frontend with a low priority problem message.
01/25/1999: PA infotypes with subtypes are not found in T591A
For infotypes in personnel administration, whose subtypes are stored in a different table than T591A according to table T582A, distribution works in the transfer mode 'Insert' and using the change pointers. Distribution in the transfer mode 'Update' does not work. The approach to solve the problem is a customer-specific extension of the routine HR_INFTY_GET in program RHALEINI by the corresponding infotype/subtype combinations.
02/01/1999: Workflow infotypes
Workflow infotypes, thus in the area 12xx, are not supported since the object type workflow is not supported in the standard ALE scenario. The approach to solve the problem is the use of the manual transport connection (RHMOVE30).
05/17/1999: Infotype 2011
The Infotype 2011 is stored differently than the other infotypes and therefore cannot be distributed.
11/09/2000: Segment for infotypes with a width of more than 1000 characters
The maximum width of a segment is 1000 characters. For this reason it cannot be generated automatically for infotypes with a width of more than 1000 characters.
A possible solution is to create the segment manually and to only insert the key fields and the application fields that are really needed in the segment in order to avoid exceeding the 1000 characters. The values of the fields are transported from infotype into the segment and vice versa in the case of infotypes that are distributed additionally. The reason is that the fields have the same names in segment and infotype.
07/17/2002: In ALE inbound processing, only the data records of the infotypes are posted - similar to the infotypes to be distributed in the standard. No additional functions regarding possibly dependent or derived data in other (database) tables are executed. A solution approach is to distribute the dependent or derived data in a separate (customer) scenario or implement a customer exit (RHALE001) or a BADI (HRALE00INBOUND_IDOC) with the desired functionality.

How to find IDOC Function Module for Basic Type:ORDERS05

Hi,
What is the Transaction Code to locate the Function Module linked to the IDOC Basic Type & IDOC Message Type?
Appreciate Your Help.
Thanks,
Kannan.

Hi Seshu,
Thanks for your reply. While creating a Custom IDOC, How do I link the IDOC Function Module and Basic Type. Appreciate Your Help.
Thanks,
Kannan.

Missing Email and Phone Type in MS Visual Studio 2013 Community Edition Lightswith HTML Client Project

I was wondering if the Email and Phone types are only available to VS 2013 professional (or any other paid versions).
Can someone please shed light on this? I'm kind of stuck on the tutorials of Beth Massi.
Thanks in advanced!

HI Jaybee lsip,
Welcome to Lightswitch forum.
We can use Email and Phone types in Visual Studio Lightswitch 2013/2012, etc. If you got error message using Email and Phone types, you need check whether this issue is related to your VS environment, and repair your VS first, perhaps it will
help you to fix it.
Please let me know if there is anything that I can do to help.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What is message type, basic type and logical message?

I have a question with EDI.
What is message type? what is basic type? what is logical message?
I am a bit confused. I appreciate your links that you may provide, but even if you can brief me in a few sentences, that will be great.
Thank you,
Krishen

A Message type indicates the type of business document that you are trying to transmit or receive.
A BASIC type is the IDOC type, which is the actual document that is being exchanged. A message type can be associated with different IDOC types and depending on the requirement you can choose the appropriate one.
A logical message is nothing but the message type.
Regards,
Ravi
Note : Please mark all the helpful answers

Message category INFREC and Basic Type INFREC01

Similar Messages

Maybe you are looking for