Message control buttons in Japaneese

My galaxy s5 messaging buttons are in Japaneese. I can sent messages in english but all the control buttons - such as the send button - are all in japaneese. it is driving me crazy.....anyone have any ideas. I have looked at my setting and all of them seem to have english as the default language.

thacky710,
Oh my! I'm sorry to hear that. I know it's important to have the correct language for your phone and this is certainly odd. Let's go to Settings>Language & Input>Language should be set to English. Then, scroll to the keyboard sectiona and tap on the gear icon. In each one, switch the "Input Language" to English and delete any other options you see there.
AdaS_VZW
Follow us on Twitter at @VZWSupport

Similar Messages

I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

1. HP Pavilion dm4 XO132AV
2. Windows 7 64-bit
3. No error message
4. No changes were made prior to when the issue occured
5. Question: I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp50501-51000/sp50856.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How do I break a for loop (inside) and a while loop (outside) at the same time by a control button

I have a while loop (outside) and a for loop (inside) and a control button within the for loop. I want to stop the program by click the botton without finishing the for loop. How can I do that?
Thank you in advance.

HI Please find attached snapshot Regards, Santosh
Message Edited by SanRac on 12-17-2009 05:12 AM
Message Edited by SanRac on 12-17-2009 05:13 AM
Attachments:
Snap1.png ‏4 KB

Ale/Idocs ..... what is the role of message control

Hi Guy s..
Can Any one.. tell me.. Importance of message control , Stand alone and change pointer s in Ale Idoc''' and where to use...

Hi,
Message Control:
With Message Control is documents are output based on
certain conditions. In ALE scenarios this is basically used for transfer transaction data (fulfilling configuration settings defined in message control) from one system to another system.
Example: If you want to send purchase order IDocs from customer to vendor system using ALE. When saving of purchase order the IDocs should be triggered. Further the IDocs should only be sent when the purchasing document fulfils certain conditions - purchase document of a certain document type only needs to be sent. By output control we can configure the conditions and the timing (when the document should be triggered) and using ALE (as interfacing technology) we can send IDocs (containing application data fulfilling conditions) from one system to another system.
For More Info on Message Control,
/people/gajendra.bhakuni/blog/2007/03/13/message-control-output-control-for-ale
Change Pointers:
Change pointers are the mechanism through which you can send data to another SAP system or external system if there is a change happening to specific fields of master data.
Change Pointer (Master Data Distribution)
Purpose
If you want to distribute master data changes with the SMD tool (Shared Master Data), changes to the master data objects are flagged for distribution by change pointers ( ® Master Data Distribution).
The SMD tool is connected to the change document interface. If the master data changes are to be distributed, the application writes a change document. The contents of this are passed to the SMD tool. The tool writes change pointers, reads the application data and creates the master IDoc.
The master IDoc is then passed to the ALE layer, which sends it to all interested systems.
The change pointer tables (BDCP und BDCPS) should be as small as possible. Use as few change pointers as possible and delete change pointers which you no longer need.
do the following steps for Change pointers ::
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
go through this link which ll give you detail about the change pointer
http://www.angeli.biz/www5/cookbooks/workflow/workflow_30/docu.htm
http://help.sap.com/saphelp_nw04/helpdata/en/12/83e03c19758e71e10000000a114084/content.htm
http://help.sap.com/saphelp_470/helpdata/en/dc/eb683c00e8a646e10000000a11402f/frameset.htm
Regards,
Padmam.

Control Button not working for Apple Lossless Music

I have a brand new black iPod shuffle and the control button in the middle has been problematic, at best, with my Apple Lossless music that I had on my PC.
When I push the control button, I get nothing. Only the female voice telling me what that track name is. I've attempted different "button pushing" methods such as once, twice, three times, as well as durations, 250 ms, 500 ms, 1 second. Nothing seems to work, I don't have any 128 kbps (garbage in my opinion) to try it out on.
Suggestions?

Thanks for the response, couple of questions...
1. Do you have the "Manual Music Manage" or similar button checked on your 3G shuffle?
2. Did you put the lossless CD tracks in a playlist, or just "heap" them in a giant list (like I have, I don't do playlists)?
3. Did you use iTunes (8.1.x) to do the ripping, or an older version. These lossless tracks are quite old, I don't even think that I had v8 when I originally did them.
Message was edited by: NKS Guy

Restoring control buttons in mail

When I open a new mail message I have lost the red, green and amber control buttons from the message toolbar. Does anyone know how to restore them?

Mail is in Full Screen mode.
Press esc key
or control + command + F keys.
http://support.apple.com/kb/PH11941

Satellite M70: Control button keys are not working

I currently reformatted my M70 to WinXp Pro Sp2, downloaded all related TOSHIBA drivers and related programs [ie. Toshiba control button driver / program] and system is running normal. However, CONTROL BUTTON keys are not working, was working fine with XP Home edition and Win Media but when I called Toshiba Support they couldn't help me because I had upgraded to Xp Pro. My Question is...Is there a fix or a solution to this issue and where can I download or find this fix.
Thanks
Emm

Hey Folks
Thanks for the advice, however, I did download the control driver and the controls program for the M70 model AND installed them in that order. The Controls Driver installs correctly but unfortunately, when installing the Controls Program, I get a message that the program will not install because it's not the right version for my M70-CL3 [PSM73C]. Not sure what to do here. I would think that everything should work properly seeing as taking the step up to XPPro SP2 isn't that far of a stretch.

Media control button isn't ON - Satellite P305D-S8828

I reformat my laptop and didn't save the drivers (boohoo!).
I can't use the touchpad and tried installing both Alps and Synaptic but neither works.
Another problem is that the Media Control Buttons (located beside the Power Button) are not lit.
I use the Media Buttons yesterday but when I turn the laptop on today, it wasn't lit.
Please help! I don' know what to do anymore...
Message was edited by: mhylz

Hi
You could try to setup the multimedia button using the TOSHIBA Button Support.
The application in +Program Files\Toshiba\TBS\Backlight.exe+ controls the illumination
Check these threads for more details:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=150879
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=145425

Power button and voice control buttons won't work on my macbook pro retina

I found that my power and voice control buttons won't work on my new Macbook pro retina. I can't shut it down or restart it in any way. And Im afraid if I force to shut it down I can't turn on it cuz the power button won't work. What should I do? Any idea???

Please read this whole message before doing anything.
Back up all data.
Quit Facetime and Messages if either is running.
Step 1
Hold down the option key and select
Go ▹ Library
from the Finder menu bar. Move the following item from the Library folder to the Trash (either may not exist):
Caches/com.apple.imfoundation.IMRemoteURLConnectionAgent
Leave the Library folder open. Log out and log back in. Try the applications again. If they work now, stop here. Close the Library folder.
Step 2
If you still have problems, quit again. In the Preferences subfolder, there may be several files having names that begin with any of the following strings:
com.apple.imdsmsrecordstore
com.apple.imservice
Move them all to the Trash. There may also be a file with the name "com.apple.imagent.plist". Move that to the Trash too.
Also in the Preferences folder, there's a subfolder named "ByHost". Open it and do the same thing.
Log out and log back in. Test again.

Flash CC on W7 . By importing fl.controls like 'import fl.controls.Button'; I get compilation error 1172. Solution?

Flash CC on W7 . By importing fl.controls like 'import fl.controls.Button'; I get compilation error 1172. Solution?

Can you show the relevant code and the complete error message? Before running go into your Flash Publish Settings and choose the option to Permit Debugging - it can help by adding information to the error message.

ALE - How to use outbound message control on HR to Accounting IDOC?

Hi all,
I have a scenario where I want to transfer, using IDocs, Payroll posting to Accounting but I don't want to transfer the posting of Travel trips. Since, on the distribution model, I am using method "AcctngEmplyeeExpnses.Post" which is needed for the payroll, everytime a travel document is posted, the system creates also an IDoc with message type "ACC_EMPLOYEE_EXP". I would like, then, to use the message control feature on partner profile to avoid the creation of IDocs with object type TRAVL. Any help will be appreciated.
Thanks,
Miguel

Hi FPT,
Have u got the solution for your problem....Actually i am also facing the same problem but for security purpose user should not see the Text what i am sending to the server (the Text will be hardcoded so)....Please can u help me if you know
And can't we send SMS without using MFMessageComposeViewController.Just by clicking the button message should send..Please explain me if you know
Thank u...

Authorization Object for Purchase order Message control

Hi ,
Is there any stadard authoriztion object to control the print and print preview options for Message control .
I am requied to control the print and print preview options for purchase order messages for certain users depeding on there authorizaion.
Thanks in advane.

Hi,
When you click on the 'print preview' button on ME22N/ME23N the system
makes an authority check on transaction ME9F activity 04. The current
logic forces the print preview functionality to be accessed ONLY by the
users who print. Therefore, only users that have authorization to use
ME9F are authorized to use the Print Preview button in ME22N/ME23N.
Kindly try the authorization objects M_BEST_EKG, M_BEST_BSA and
M_BEST_EKO = 04.
You can
also have a look the user exit
EXIT_SAPLMEDRUCK_001 in enhancement LMEDR001 for print program
SAPLMEDRUCK.
INCLUDE ZXM01U04
you can create own coding for all possible AUTHORITY-CHECK.
BR
Nadia Orlandi

How to read the processing log of message control ....

Hi,
    I would like to find the idoc # generated by message control ...
    The input is delivery number that uses message control....
    In the delivery header output part, we can see the idoc # by pressing the
    processing log button, but i don't know how to get this log in ABAP program
    any good suggestions? Thanks

Hi,
Do you mean to read the mail content in R/3 inbox or UWL..?
If in R/3 then SBWP transaction Unread Documents..
If in UWL see notifications part.
Please if this does not solve your problem> please elaborate on your problem
Regards
Sai

Common control buttons for animation+video

I wan to be able to embed an animation like one of these http://http://www.texample.net/tikz/examples/tag/animations/, which has its own control buttons,
alongside a regular video, and have both of them run by a common set of control buttons for play/pause/rewind.
For example, the video could be a video of an actual object or a ball falling, and the animation could be the animated drawing of some math formula related to the fall of the object.
Message was edited by: Maesumi

(1) Is it possible to put 3 buttons, say A, B, C, on a PDF page so that pressing A will be equivalent to pressing B and C?
(2) And would Adobe Pro allow one button to be placed on top of another one?
The simplistic idea here is to manually perform what a program would do. So I will use A as the master control and place B on top of the control button for the video and put C on the control button for animation. Then when I click on A it is as if I have pressed B and C simultaneously.

HT4623 my volume control button on my music disappears - any ideas why?

My volume control button on my music disappears and therefore so does my tone when I get message or calls. Any ideas why?

Quit the App by opening multi-tasking bar, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.
Relaunch the App and try again.
Restart the device. http://support.apple.com/kb/ht1430
Reset the device. (Same article as above.)
Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

Message control buttons in Japaneese

Similar Messages

Maybe you are looking for