Message control for message type ,V 1499

Hi Folks,
SAP standard message V1 499 is flashed in case when i am creating the return sales order for an item which had already return in place.
Following message is displayed 'There are already returns for item 000010: 348 IT'.
Above messge is at item level..for each of the item which had return system will flash message.
My clients requirement is that this message should flash at header level..
For example:-
Now i have invoice which had return order as per following:-
:- return order XXX for item no .10
:- return order XXX for item no. 20
:- eturn order YYY for item no. 30
Now when i refer same invoice for return order creation scenario once again.. system will flash above message 3 times.. As per my requirement it should be displayed for 2 times only..One message for item 10 and 20 and other one for item 30..
Is it possible to make this changes through standard configuration..Kindly let me know.
Regards,
Abhijeet

Hi,
As per i know we can not modify the V1 messages, but we can modify V4 messages. For your requirement you have to do some technical enhancement.
For controlling V4 messages you can have a check at OVAH t-code.
Thanks,
Raja

Similar Messages

Copy Control for Transaction Types

Hi,
Was wondering if someone could help on following topic. We need to specify the possibility of copy control (follow-up) for certain transaction types in CRM 6.0. I've specified the source TT (ZAPP) and the target TT (ZCON) in customizing activity : Define Copying Control for Transaction Types.
ZAPP = Custom Appointment Activity
ZCON = Custom Opportunity
Now, when I want to create a follow-up for ZAPP in the WebUI (via dropdown 'More' and action 'Follow-Up'), I always get an extensive list of transaction types (about 30) rather than only the opportunity that I originally specified. Any ideas?
Thank you,
Sebastiaan.

Hi Kai,
Many thanks for your answer. Indeed, the COPY_DOCUMENT is a very good alternative as it also directs the flow for follow-up. However, I have a question in regards to using this method. I can see that there are parameters that need to be provided (like PROCESS_TYPE etc) but apart from that is it also possible to change fields in the copied document.
e.g. Currently the description of the copied document gathers the description of the action definition, but how can you pass the description of the previous document for instance? Is this also done via the actual parameters?
Thank you,
Sebastiaan.

Message type control for movement type

Hi All,
We are using two movment types,
301 - Plant to plant transfer
934- initial stock entry reversal(custom one).
Issue is when ever available stock of materia lM1 is consumed against some sales orders , if we try to do transfer posting using transaction MB1B MOVEMENT TYPE 301 system is throwing error message zero pcs available for M1 and not allowing us to post which is correct (messge M7 181).
But for the same material M1 if try to post using transaction MB1C and movement type 934 system is tHrowing warning message zero pcs available for M1 , but allowing to post there by removing the confrimed / consumed stock from the sale order. here also the message is M7 181.
So please let me know can same message type is used differently for two different movement type. If so where is the setting is being done.
Regards,
Babs

Dear ,
Because u already book for sales orders so release the sales orders you can do, or increase the stock and u can use .
regards
shiv

Price Control for Material Type

Hi
How to configure a default price condition for a particular material type and should greyed off and not allowed manual change.
Regard
MM
Edited by: Csaba Szommer on Nov 4, 2011 8:15 AM

Hi,
1st decide price control for your material type & enter in OMS2 with your material type in Price control field in Valuation segment.
Get field name of price control: MBEW-VPRSV
Get Selection Group for price control in T.code: OMSR: 32
Check Field reference for your material type in T.code: OMS2
Select round box of u201CDisplayu201D for Selection Group 32 by double clicking Field reference & save.
Now create material (MM01) with your material type and you can find Price control defaulted which you enter in OMS2 and it can not changed.
Regards,
Biju K

Maintain Copy Control for Document Types.

Hi Gurus,
My Client has two customized documents both are order Types and wants to maintain Copy control between them.
If i see VTAA i can find either New Entries option or copy option.
When i go for new entries option it asks me Requirements and Routines which needs to be set for this copy control and i am not aware of those.
The Other option is Copy as but since it's customized document types so i am not getting which document should i take as refernce for copying.
Please suggest me how to proceed.
Thanks in Advance!!!!

Hi
Ideally we don't gamble with standard settings. Not only in copy control but for all other settings related to document types, conditions, movement types etc etc. If standard settings or configuration has been deleted by human error then we should restore standard settings first. May be BASIS guy can do it and if it is not possible then open some other server where these settings are there and you should do all settings manually by copying the standard ones.
Why we recommend to always copy standard settings and make necessary changes is that standard settings are done by SAP and they have tested it thoroughly and they have hundreds of consultants who have worked on these settings. Standard settings are reliable and we can copy them without any fear of mistake. Whereas if you copy some Z settings or create new one then there are more chances of some wrong or missing settings. Logically may be it sounds not that important or useful but technically it is really fruitful to do this.
In standard settings system copies all subsequent settings and you don't need to do those settings again and you are already aware of this fact.
One more benefit is that you only need to change document names and in create new entry you'll have to enter all the fields one by one and you don't know which value is more appropriate for this field. It also saves time efforts and people like me always prefer to save efforts
Thank$

Shall v maintain price control for material type with plant specific ?

Hai Guru,
In OMS2, we change HALB price control [valuation] as V or S. whether shall v maintain this for plant specific.?
Kindly guide
With Regards
Swetha

Hi
if you do not make the indicator Price control manadatory active then you can have different price indicator for each plant. However thsi indicator is never done plant specific. If you wish to have plant specific then you may have to have a new material type and again you need to control the MM01 creation for that particular plant by means of Authorisation control which is littel involved also but can be done.
Regards

Access Control for 1 Type of USB Manufacture/model

Hi,
I'm testing with the "Storage Device" and "Usb Connectivity" Policy.
I get a lot working, but i don't understand something.
Both policies has a list for custom devices. What is exactly the different? beside that one has also "read only" and the other has a lot of more rows to fill in.
When do you use the list of both, or do you need to combine it?
For examply it want to:
- Disable all Mass storage (USB) by default
- Allow every usb stick from manufacture "Sandisk" and model "Cruzer". with Read only
What's the best way todo that. I'm stuck on the custom lists.

Originally Posted by cgacesa
Hi,
Storage Devices utilises our file system driver to determine what is a storage device i.e. CD/DVD, SD Card, USB Storage / iOS device / Android device, Floppy drives etc. USB Connectivity can control anything you can plug into the USB port i.e. keyboard / mouse, scanners, USB drives etc.
Have you tried the device scanner tool ? Have a look through this for some tips: Novell Doc: ZENworks 11 SP1 Endpoint Security Utilities Reference - Device Scanner
I would suggest using the USB Connectivity policy, Disable the Mass Storage Class group and import your "approved" USB device. You can edit the data that you import and just leave the e.g. Manufacturer and Vendor ID details.
Hope that help.
Cheers,
Chris
Chris Gacesa
Senior Product Manager
Novell - ZENworks
[email protected] (Email)
Hi Chris,
Thanks for helping,
I know the Zesm Device scanner, Have used it to collect all the usb data.
But i've still the problem. In my example i try to do:
- Disable all Mass storage (USB) by default
- Allow every usb stick from manufacture "Sandisk" and model "Cruzer". with Read only
You suggest me to use the "USB Conn.Policy". But on that policy there is no "read only" setting for the "USB Device Access Settings List"
If you go to the "Storage device policy" you are able to set "Read only". But there i have not enough fields to create a custom scenario to only allow the Sandisk "Cruzer".
Don't know if it's normal to combine that policies, but i think that makes it's more complex than it should be.
So as a result i'm back to my first question.

Copy Control for EEWB fields not working

Hi Experts,
I have added one custom field to CRMD_ORDERAM_H using EEWB, now i want this field to be copied from Quotation to Sales order. I have tried with the following options:
1. Created new implementation Ztest for the Badi CRM_COPY_BADI with new filter value.
2. Assigned the implementataion in Copy control for transaction types.
3. Badi is getting triggered, but I am not able to copy the value to the sales order.
I have written the following code in ORDERADM_H method:
METHOD if_ex_crm_copy_badi~orderadm_h.
constants
INCLUDE crm_object_kinds_con.
INCLUDE crm_object_names_con.
INCLUDE crm_appointment_types_con.
local data
DATA:
    ls_orderadm_h_com    TYPE crmt_orderadm_h_com,
    lv_allowed           TYPE crmt_boolean,
    lv_ref_kind          TYPE crmt_object_kind,
    ls_input_field_names TYPE crmt_input_field_names,
    lt_input_field_names TYPE crmt_input_field_names_tab.
IF cs_orderadm_h is not INITIAL.
    lv_ref_kind = gc_object_ref_kind-orderadm_h.
    CALL FUNCTION 'CRM_ORDERADM_H_OBJ_ALLOWED_OW'
      EXPORTING
        iv_ref_guid            = cs_orderadm_h-guid
        iv_objectname          = gc_object_name-orderadm_h
      IMPORTING
        ev_allowed             = lv_allowed
      EXCEPTIONS
        admin_header_not_found = 1
        OTHERS                 = 2.
    IF sy-subrc <> 0 OR lv_allowed <> 'X'.
nothing to do
      RETURN.
    ENDIF.
    CLEAR ls_input_field_names.
    CLEAR lt_input_field_names[].
    ls_input_field_names-fieldname = 'ZZDEP2PVNDPGM'.
    INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_orderadm_h_com-guid = cs_orderadm_h-guid.
ls_orderadm_h_com-ZZDEP2PVNDPGM = is_ref_orderadm_h-ZZDEP2PVNDPGM.
    CALL FUNCTION 'CRM_ORDERADM_H_MAINTAIN_OW'
      EXPORTING
        is_orderadm_h_com             = ls_orderadm_h_com
   IV_EXTERNAL_CALL              = FALSE
IMPORTING
   EV_GUID                       = cs_orderadm_h-guid
      CHANGING
        ct_input_field_names       = lt_input_field_names
   CT_DOC_LINKS                  =
   CT_DOC_FLOW_FIELD_NAMES       =
EXCEPTIONS
   HEADER_CREATE_ERROR           = 1
   HEADER_CHANGE_ERROR           = 2
   PARAMETER_ERROR               = 3
   PROCESS_TYPE_ERROR            = 4
   DELETION_NOT_ALLOWED          = 5
   NO_AUTHORITY                  = 6
   OTHERS                        = 7
    IF sy-subrc <> 0.
       MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
ENDMETHOD.
able to get the values to ls_orderadm_h_com and lt_input_field_names, but the value is not getting copied.
Any idea on this?
Thanks in advance.
Regards,
S Reddy

Hi Reddy,
You don't need to call functions like 'CRM_ORDERADM_H_MAINTAIN_OW' to update that attributes.
All you have to do is to fill changing structure CS_ORDERADM_H that belongs to your target document, with the values you desire (the value for ZZDEP2PVNDPGM field for example). Then fill changing structure CT_INPUT_FIELD_NAMES with the field names that you want to update ('ZZDEP2PVNDPGM' for example).
Kind regards,
Garcia

Follow-up transaction copy control for opportunities

Our CRM system is currently configured to permit follow-up opportunity creation. When follow-up transactions are created all product categories are copied to the new opportunity. We would like to stop this. All header and business partner data should be copied as present, however product information should not be copied. (i.e. follow-up transactions currently work, we only want to switch off product data copying)
I am not familiar with follow-up transaction customization, and not sure exactly where to start. Should I be modifying the current BAdI or is there a standard customizing option to switch off copying of product categories?

Hi Derek,
Just try this:-
Go to SPRO->IMG->CRM->Transactions->Basic Settings->Copying Control for Business Transactions->Define Copying Control for Transaction Types.
Search for entry Source=oppt and target=oppt.In this entry, uncheck the check box-Copy Item Number and see if it resolves your issue or not?
Thanks and Regards,
Rohit

Foreign Trade - Legal Control for scheduling agreements

We are on version 4.6C and I am setting up the legal control for my company. It seems to work quite well for sales orders but then when I went in to configure scheduling agreements it errors and tells me you cannot do legal control for document type "E" which are typically scheduling agreements.
I cannot find any documentation on this. Does anyone know why legal control does not work for scheduling agreements and/or is this functionality available in the Global Trade Services module??
Thanks in advance for any and all help!!
Debbie

Jean,
I have done a Foreign trade implementation.
The core team of the client are FT experts and they would tell you about the legal requirements. Your job is to map them in SAP FT.
In this process you would gain Knowledge about Foreign trade regulations of that country. Remember its country specific.
The ECCN's are provided by the client. Info abt the same is extensivley available on the NET.
You have to get the list of all the mtrls which fall under the controlled cantegory of the respective commerce ministry and then start the config setting these mtrls as relevant for FT checks.
Thanks
Vishal

Copy control for opportunity to Sales order not working

Guys,
I am working on CRM 2007. I set up the copy control for transaction types so that I can convert my Custom Opportunity type to a Sales order.
However when I am in my Opportunity and click on Follow of transactions, my order type is not availabel in the selection list.
I was able to set it up for Lead to Opportunity but opportunity to Sales order is not working.
Any help on this?
Ani

HI Anirudh,
I have a similar requirement such as Copying line item from Complaints to Returns application.
Procedure:
1. Firstly i create an complaint
2. create a follow up document as Returns
3. I enter an product in the complaints and when i click on Copy to returns the line item has to be copied.
Here is the requirement. The line item is copied, but here the problem is, .... The line item doesn't get copied unless and until the instance of the target is retrived.
Could u please help me on this ?

Control data for storage type is missing Message no. L3006

Dear Mates
i am trying to create a transfer order from delivery. the moment i click on save in LT03 its giving me the error message as
Control data for storage type is missing
Message no. L3006
i have explored every thread regarding the same issue and also implemented some measures like
-> extending the material to particular warehouse and maintaining stock removal and stock placement strategies in it(i created new one from MM01 itself)
-> going to spro path SPRO->Logistics Execution->shipping->picking->Lean WM->Define storage type. and assigned storage type.
but still i am getting the same message in LT03
can you please help me out on this.

Please take a look at the following links and see if they will help at all.
Error on creating a TO - Control data for storage type is missing
"control data for storage type is missing"
Kind Regards,
Jason

ALE-IDoc : Outbound message control for MIRO,IDoc message type for INVOIC

Dear Experts,
                    I am using the IDoc message type INVOIC. For that i have created the new output type. Then i assinged the the Program RSNASTED and form routine ALE_PROCESSING.
                    But when i am saving the transaction in MIRO i am getting the Update Error like VN 056: Processing log for program RSNASTED
                    Please help me to rectify this problem

Hi Dharmendiran,
We also have the same requirement to send status acconf messages on Inbound INVOIC idoc posting..
Can you let me know how you went about creating new output type..did you mean new output type in NACE for application MR?
Thanks.

Error in ALE service 29 Could not determine recipients for message type MAT

Hi Experts,
While transferring the material using ALE am getting error 29 ie 'Error in ALE service' and message is 'Could not determine recipients for message type MATFET'.
Also i ve recieved the materials with the proper status al the end am getting the above error.
Kindly help me out.
Thanks in advance.

Hi ,
Status 29 means " partner profile not found " . Please check if the recieving partner is configured properly in WE20 in sender system.
Also make sure that the Port and RFC definations are also completed. If the IDoc is manually triggered then please make sure that control record parameters of the idoc are properly filled - if we miss the details ( like wrong port given , wrong basic type for message type - or extended message type ) then also the idoc will fail in status 29 even though the partner profile is properly configured .
Since your idoc is getting generated i think no issues with BD64 since already interested recipeints were populated in control record of idoc.
Regards
Vikas Chaudhary

Settings for system message type in MM

Hi,
In spro--> Define Attributes of System Messages, there are many message types are there.
If we see from the dropdown, many are not showing in the main screen but they still work in background when while doing transaction if some input is wrong.
for example in purchasing, application area 06, message type 131- RFQ for vendor & already entered, is not appearing in the screen. but when we are created RFQ twice for the same message system throws error.
Likewise many messages are there, even we donot maintain still they pop up.
how we know which message we require to maintain in the screen and which not.
like what example I have given works autonatically for transaction.
I think there may be some messages where user doesnot have control at all, what ever way you set is either W or E, system determines how it is defined in programs.
I table T100 more than 600 messages are there,
can somebody guide me on approach to work with messages. It is quite confusing.
regards

Hi Pallavi,
Actually some of the Messages are self explanatory in the application of the Programs.
These W/E Messages are included in the basic programs of the Transactions which runs in background to execute the transactions, if a user makes any wrong entries which afffect the proper execution of the program the system will throw these messages which means some data is not flowing properly.
Go to SE91 and enter the Message class/Application area and you will find all the Message number related to that Application.
At the end you will find one check box called self explanatory some of them will not displayed in the drop down list at Define attributes of system messages in IMG settings.
So means you don't have the option to change these messages as per your requirement like Warning or Error messages.
Hope you understand.
rgds
Chidanand

Message control for message type ,V 1499

Similar Messages

Maybe you are looking for