Message Control in ECC6 from PM Confirmation after CNF & TECO ?

All,
In 4.6C we had an error message when trying to post further confirmations against a mainteance order with status final confirmation (CNF).
Following the upgrade to ECC6 this has become a warning message.  I've been unable to find the message control option in customizing to change this back to an error.
Ideally we'd like to stop technician posting hours against orders tagged with either CNF or TECO.
regards
Steve.

Hello,
The warning here comes from status control. This can be checked via BS23 as follows:
Position cusrson on system status I0009 / CNF, then double click. The business transactions relevant to this function are displayed. In this case the ones to check are:
       RMRU / Confirm order
       RMVR / Confirm operation
As delivered both of these are set to 'warning'. I expect you may find that 4.6c values have been changed to 'disallowed'.
The settings here would affect PM/CS orders, PS networks and PP orders.
It is not advised to change these SAP delivered settings.
-Paul

Similar Messages

  • Process Order accepts Confirmation & GR from BAPI even after Confirmed

    No matter what i try the formatting and CRLF go for a toss in this text.
    Hi PPPI Gurus,
    I am a beginner in this area and request your help.
    We are implementing a project where the process order Confirmation in SAP ECC 5.0 in SAP PPPI module is done using xMII which call the BAPI_PROCORD_CREATE_TT     RFC.
    The customer wants to (certain times) do a final confirmation without actually completing the order e.g if the Order Qty is 100 then, they want to just manufacture 25 and then do a final confirmation, after which SAP GUI screen does not allow any Process order Confirmations against that process order.
    We are using the BAPI_PROCORDCONF_CREATE_TTRFC to do multiple PO Confirmations and GR for particular Process order. Below is a scenario
    Case 1:
    1. Order Qty =100  ( Unlimited Delivery is not checked and tolerance is Zero).
         Which means only 100 is accepted.
    2. 100 Quantities are produced and confirmed using the BAPI_PROCORDCONF_CREATE_TT (with Final confirmation value as 1 , which mean auto confirmation)
    3. Next when the BAPI confirms & GR's against the same order, the Complete qty is not visible in the COR3 status. And is visible only in the COGI transaction.
    That is expected behavior. and i am ok with that.
    Case 2: (The one with the problem)
    1.  Order Qty =100  ( Unlimited Delivery is not checked and tolerance is Zero).
         Which means only the 100 is accepted.
    2.  25 Quantities are produced and confirmed using BAPI_PROCORDCONF_CREATE_TT (with Final Confirmation value as X , which mean Final confirmation)
    3. The Confirmation and GR go through and the status of the process order now changed is CNF and the Deliverd qty is 25.
    At this point , if you logon to SAP GUI and try to make a process order confirmation you get an error messages which says the Process Order is already confirmed and no more confirmations or GR can be done against this Process order.
    4. But when you Again Run the BAPI_PROCORDCONF_CREATE_TT, it goes ahead and confirms and makes the GR for that Process order.
    The Expected Behavior should have been that this quantity is now in the COGI transaction.
    5. The Process order  allows any number of Further confirmations till the Ordered Qty and Delivered quantity are  same .
    so dear gurus I know i have written a very long doubt but would be very happy to get a response from you. I would ideally not like to enhance or change the BAPI and want to understand if I have missed some setting or parameter that I have to pass in the BAPI for the final confirmation so that once the Status of the Process order is CNF , no more Confirmations are allowed even from the BAPI.
    Thanks in Advance.
    Regards
    Suraj
    Edited by: surajprabhu on Aug 17, 2009 6:37 AM

    Hi,
    The standard SAP will allow the GR even after the Final Confirmation. The Final Confirmation is acting as a agent to change the status of the process order to CNF. thats all.
    If you want to restrict the GR then you have to do Enhancement with  use the USer Exits. Pleas try to use the User Exits PPC00009 or MBCF0001,MBCF0005
    thanks and regards
    murugesan

  • I am not able to send messages to multiple person from my iphone 5s after updating to ios 8.1.2. It shows message not delievered

    I am not able to send messages to multiple person from my iphone 5s after updating to ios 8.1.2. It shows message not delievered

    Hi waqaskhan91,
    Thank you for visiting Apple Support Communities.
    If you're not able to send text or iMessages to certain contacts after updating your iPhone, start with the troubleshooting tips in this article:
    iOS: Troubleshooting Messages - Apple Support
    If you only see this behavior with a few contacts, you may want to try these steps first:
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and recreate the contact from the Contacts app. Send a new message to the contact.
    Best Regards,
    Jeremy

  • When playing music from Ipod in my car, music suddenly stops and message appears to restore in iTunes.  After a few minutes, it starts to play again.  I hear a click and the apple logo shows on the screen.  Any ideas??

    When playing music from Ipod in my car, music suddenly stops and message appears to restore in iTunes.  After a few minutes, it starts to play again.  I hear a click and the apple logo shows on the screen.  Any ideas??

    You may need to do a Restore in iTunes.
    Clicking sounds from an iPod that has a hard drive is probably not a good thing.  It is possible that your iPod's hard drive is becoming unreliable.

  • After installing the update I get this message on an app from facebook "502 Bad Gateway nginx" what is the issue and what do I need to do to solve the issue?

    after installing the update I get this message on an app from facebook "502 Bad Gateway
    nginx" what is the issue and what do I need to do to solve the issue?

    Hi there, harleygirl.
    A look around the internet and my previous knowledge indicates this is not an issue with firefox, but with how the server that the app is run on is incorrectly configured. To test this, please install an old version of firefox. You can download an older version from http://www.mozilla.org/en-US/firefox/all-older.html then try to visit the website again. Please let us know if it turns out that it works with version 3.6

  • A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?

    A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?
    I suggested contacting Compub in Nassau St as the info is priceless and worth the trouble of trying to regain?
    Any thoughts? The poor lady is very distress

    If she has backed up her iPhone she can replace that iPhone and set up the new iPhone from her backup.
    You can put the iPhone that went into water into a plastic baggie with either new silica gel packets (preferred) or raw rice and let it sit for  4 - 5 days. After that time remove the phone and connect it to power for at least a half hour. While it is still connected to power reset it by holding down the power and hold button, wait for the Apple logo then let go of the buttons. Might take several tries. If it revives immediately back it up.

  • How to send IDoc(Sales Order Confirmation) without Message control

    Hi,
    I need to send Sales Order confirmation,Delivery and Invoice through ALE (IDoc's). I am asked not to use MESSAGE CONTROL or CUSTOM IDoc to send confimation.
    I dont need to send a instant confirmation but i can do it at a specified time intervals.
    Do we have any other possiblity other than the both?
    Can you please give the steps to do, if possible?
    Thank you in advance,
    Gangolu.

    Hi
    This link may be useful
    Re: Re-open EDI - ORDCHG for outbound sales order

  • Text messages and phone calls from March 2012 to date are missing after activating iphone5

    text messages and phone calls from March 2012 to date are missing after activating iphone5. I backed up my 4 before activating my 5. Can i retrieve them somehow?

    i would not want to bet on nokia ever releasing a patch or update in the software to allow this function on this particular phone.
    if you look at nokia phones over the years, they have added functionality like this across a wide range all at once, take for example timed profiles on symbian phones. these have only just been phased in.
    i do not think it is a development cop out, more along the lines that nokia is a huge company and as such would have a huge effor in market research. if they didnt pick this out through their market researc, why spend the money adding it?
    the comment on annoyance is entirely personal to me, as it is important to you - you may want to consider moving to a symbian (series 60) based handset as these give you a lot of expansion for this sort of need.

  • TS1368 Error message tells me to reset password.  After resetting password I get confirmation email that new password is set.   As soon as I try to access App Store I get error message that password is not valid.

    Error message tells me to reset password.  After resetting password I get confirmation email that new password is set.   As soon as I try to access App Store I get error message that password is not valid.

    Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.

  • Need a way to permanently delete messages from iphone, even after syncing it with itunes it shows up in search history

    Need a way to permanently delete messages from iphone, even after syncing it with itunes it shows up in search history

    Before iOS 7 I NEVER searched internet for "how to do ... on iPhone ?". Now it's my third time when I cannot find a function to delete all messages on iPhone, that should be and was obvious in previous versions of iOS. To Erase iPhone Contacts, SMS and Photo Permanently,you must to use a iPhone data eraser software.
    This use guide about how to deleted iPhone contacts, message:  How to erase all messages from iPhone permanently

  • Posting EDI Order confirmation without message control

    Hi,
    I would like to post a EDI sales order confirmation without message control through z program.
    Please let me know how to do this???
    thanks in advance
    Mukund

    Hi
    This link may be useful
    Re: Re-open EDI - ORDCHG for outbound sales order

  • I have a macbook from early 2008, and when I sign onto safari I get an error message for fast browser search plugin.  After that error comes up my computer freezes and I have to force it to shut down.  Does anyone know what that means and how I can fix it

    I have a macbook from early 2008, and when I sign onto safari I get an error message for fast browser search plugin.  After that error comes up my computer freezes and I have to force it to shut down.  Does anyone know what that means and how I can fix it?

    Means you have an incompatible Safari extension installed. Look in the /Home/Library/Safari/Extensions/ folder for the offending plug-in and delete it.

  • Why do I get a message that my Flash CS6 is counterfeited after I downloaded it from the Adobe web?

    Why do I get a message that my Flash CS6 is counterfeited after I downloaded it from the Adobe web?

    Genuine Verification failure downloading or installing
    Mylenium

  • Bootcamp won't launch, I've been getting the message "quit unexpectedly". This started happening after I erased "pre" from the code now I can't open it any more. What should I do?

    Bootcamp won't launch, I've been getting the message "quit unexpectedly". This started happening after I erased "pre" from the code now I can't open it any more. What should I do?

    Please try
    sudo codesign --deep -fs - /Applications/Utilities/Boot\ Camp\ Assistant.app

  • I cannot restore aback up from my computer after a softwared update. i kep getting an error message saying the phoneis disconnected even though it it not.

    cannot restore aback up from my computer after a softwared update. i kep getting an error message saying the phoneis disconnected even though it it not.

    If you're not a developer then you really should not have upgraded.
    I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades.

Maybe you are looking for