Message control tab is not present in partner profile

Hi experts,
I have a requirement where I need to add a new segment to a custom idoc . I am doing this according to the following steps:-
1. In WE31, I have created a new segment and released it.
2. In WE30, I have added the new segment to the idoc and released it.
3. In WE82, I have assigned the Message type to the custom idoc type. Though this is a custom idoc, I am using a standard message type CRMXIF_PARTNER_SAVE_M.
4. In WE41, I have created a new process code ZBUPA and assigned the message type to it.Also I have created a custom function module for outbound processing Z_IDOC_OUTPUT_CRMXIF_PARTNER_S.
5. In WE20, I have created a partner profile and assigned the message type and the basic idoc type in the Outbound parameters tab.
However, I am not getting the 'Message Control' tab from where I can assign the application type to the process code.
For this Idoc, the sender system is CRM and the receiver is XI. Also I am working in CRM6.0 environment.
Please let me know how to go about this.
Thanks,
Samrat.

Hi,
I have looked into your query. As far as i know you will define the process code for Inbound Parameters only. For Outbound parameters you will define only the Reciever port in which the process code is set.
I believe you do not have to set Process code for the outbound registration.
You have to register in the site which acts as the target destination for e.g. as APLI (Individual IDOC processing)
I hope this helps.
Regards,
Venkat

Similar Messages

Message Control tab missing

I am using ABAP Trial 7.0.
In WE20 Partner Profile, I created an outbound message type. I only see the following tabs: Outbound Options, Permitted Agent, Telephony, EDI Standard. Usually the second tab is Message Control, to state the Application, Message type, and process code.
Is there something wrong with my installation? Or in NW 7 it's removed? It can't be automated since sometimes we need to put our customized process code. Any idea where is the message control tab?

Can you elaborate on how to use WE46? I see the title 'Settings: Error and status Processing'. I don't see anything about 'global idoc parameter settings'. There are codes EDIC, EDIP, EDIX etc. with two choices of settings, Express and Inactive.
I don't see anything that could turn on the missing 'message control tab' in my outbound parameters.

I have tried several times to install iTunes update 11.1.4 on my PC. I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126). I am told to reinstall iTunes, but nothing changes

I have tried several times to install iTunes update 11.1.4 on my PC. I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126). I am told to reinstall iTunes, but nothing changes. What next? I've not had this problem with other updates requested by Apple.

I have also had the same problem with my Win 7 32 bit computer. I had great help from Apple techs in Montreal and Orlando for 2.5 hours. They helped me remove every trace of Apple products and clean the registry in two different ways. Each install gave the same problem! If Apple techs can't fix it (on some of our machines) then we are really in trouble. They promised to raise it with the "engineers" and get back to me with a solution. I am waiting and hoping. Otherwise maybe version 11.1.5 will have a fix ??

My MacBook Pro doesn't start; in safe mode shift CMD V the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start. Do you have any ideas of why this should be or what I should do to resolve this?

My MacBook Pro doesn't start; in safe mode <shift CMD V> the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start. Do you have any ideas of why this should be or what I should do to resolve this? Thanks Eamonn

Thanks for these suggestions: I have tried safe mode re-starts (both "verbose" and simple "shift" + power) to no avail. I get the error message "disk0s2: media is not present". Following this I inserted the installation disc and from there ran disc utility. The "Verify Disk" indicated an error " invalid sibling link" which it could not repair.
I also tried to completely re-format/erase the disk, but again got an error message "disk object invalid or unable to serialize".
Any ideas of what could be causing this or the best solution? I fear I am fast running out of options.

Command $TAB : message Transaction $TAB does not exist Message no. S#343

when i use the command $TAB to refresh the buffers the system gives me the message
" Transaction $TAB does not exist
Message no. S#343 "
In some systems it works as intended. How can i correct that position.

try /$TAB

HT4865 my message send tab is not working, any idea why please, thanks in advance,

My message tab to send is not working,I can type the message but when I press send it 's not working,
I don't remember doing anything to stop it, Can anyone advise me please, thanks you in advance,

If you have Settings>Messages>Show Subject Field set to On, you may be typing in the subject field of your message. The Send button won't respond until you type something in the iMessage field just below it.

Bookmark All Tabs command not present in 4.0

After upgrading to 4.0, the Menu Bar > Bookmarks drop-down no longer includes the Bookmark All Tabs command. How can we get this back? I use it a lot.
XPSP3

You can get the bookmark all tabs option by right-clicking on a tab, or use keyboard shortcut Control+Shift+D

Print message in function name not present

I have to execute a function from a table . It is like
cursor c1 is select fun_name from config_Table loop
v_format_sql := 'select '||c1.fun_name|| ' from dual ';
execute immediate v_format_sql into format_count;
end loop;
But if the function in the config_Table is not there or the function name is wrong it exits from the program
Please help me to print the text "function name wrong" if the function name does not exists in the database.

Hi,
You can do it like this:
SELECT COUNT(*) INTO v_func_count FROM user_objects
WHERE OBJECT_TYPE='FUNCTION' AND STATUS='VALID'
AND object_name = TO_UPPER(c1.fun_name);
IF v_func_count = 0 THEN
-- Function does not exist or not in valid state.
END IF;
Regards

ITunes tab? Not present at bottom of Itunesu page?

I only have three tabs at the bottom of my Itunes page which is ItunesU. the three tabbs are :ITunes u , Downloads, and podcasts. How do I find the Itunes music tab?

I'm pretty sure you want the iTunes support forum here:
https://discussions.apple.com/community/itunes
This is for iTunes U (iTunes for Universities).

EDI: Partner profile inbound not available Message no. E0337

Hi Friends,
I am facing very wiered issue for incoming vendor frieght invoice. When the IDOC is sent to SAP from the edi subsystem, it gets posted with status 56 and error message
EDI: Partner profile inbound not available
Message no. E0337
Diagnosis
An inbound partner profile could not be found with the following key:
/0040000010/LI/VN/INVOIC/MM///
This involves the key fields of table EDP21:
-SNDPRN partner number of sender
-SNDPRT partner type of sender
-SNDPFC partner function of sender
-MESTYP logical message type
-MESCOD logical message code
-MESFCT logical message function
-TEST test flag
I have created the partner profile in WE20 for Partner type LI, partner role VN and process code INVL, message type INVOIC, message code MM. I have also checked the entry in TABLE EDP21 and the entry exists.
When I open the IDOC in WE19, and click on standard inbound TAB it says partner profile not maintianed, however when i click on the control record it opens a dialog box, where we have all the entries for partner profile and when I just click on any field in the dialog box and click continue and when again click on standard inbound it say partner profile maintained.
None of the data is changed in the IDOC control record, I just click on any field and it finds the partner profile.
Please let me know your thoughts, what could be possible reason and a solution.
Thanks
Deepak

Hi Deepak,
I am facing the same problem with a different message type.
But same effect. I can copy the IDoc with WE19 and it will process nicely, completely unchanged.
Have you found the reason for this?
Thanks,
Florian

EDI: Partner profile inbound not available - message variant

Hi Friends,
I am gettin error "EDI: Partner profile inbound not available" when sending message from XI to R/3 on R/3 side.
I checked to partner profile and it is correctly maintaind .
One thing I noticed is in the control record of that idoc,under typeinfo tab, message type is orders and message variant is ALW. I dont knw what this message vaeiant means,n where it came from, but when i process idoc in we19 by removing this message variant, its working properly..
give ur suggestions.
Thanks........

Hi Kiran,
Check your Partner Profile Message Settings in we20.
[Error: "EDI: Partner profile inbound not available";
Regards,
RajeshKumar.D

No partner profiles (message control) maintained.

Hi Friends,
I have created a PO but getting error message in output type that
No partner profiles (message control) maintained.
Message no. B1127
Diagnosis
No IDOC partner profiles have been created for the message control for for application EF, condition key ZDPO and change message '' with partner type 'LS' and partner role ' '.
Procedure
Please create the partner profiles for the logical system that should contain the IDOC. You can either generate them from the ALE model or create them manually.
Any pointers.
Regards

Hi,
I get the same Error message can someone help?
No partner profiles (message control) maintained
Message no. B1127
Diagnosis
No IDOC partner profiles have been created for the message control for for application EF, condition key ZZVA and change message '' with partner type 'LS' and partner role ' '.
Procedure
Please create the partner profiles for the logical system that should contain the IDOC. You can either generate them from the ALE model or create them manually.
I need to send my PO information to a Logical system.
1) Created new message type ZZBA. Message type triggers automatically but fails.
2) I did create a LS Partner profile (PART123) in WE20
3) In outbound parameters, in partner profile I entered
LS/ORDERS
4) Basic type- ORDERS01
5) In message control i have
EF/ZZBA/ME10
6) Maintained condition record for ZZBA
PO type/ LS/PART123/A/4/EN
please help
Regards
Raj

Is it possible to use BAPI-ALE to send an idoc using the message control?

Hi Guys
Is it possible to use BAPi-ALE to send an IDOC using a message control?
I have configured the system to send an IDOC when a outbound delivery is saved in the system.
I have done the following.
1). I am using the std BAPI-ALE interface provided by the object type LIKP.
2). I am using the method SAVEREPLICA for which an interface already exists in BDBG transaction.
3). I hace created a distribution model in BD64 and added the BAPI - LIKP and SAVEREPLICA
4). Created a partner profile ( using the generate partner profile option in the BD64 transaction )
QUESTION:
1). How do i associate the custom OUTPUT type created for Delivery ?
2). I tried to associate the custom output type in the Partner profile definition under the message control tab but i am not sure which Process code to be used? Since the partner profile was generated automatically from BD64 it has an entry for SHP_OBDLV_SAVE_REPLICA as a message type in the outbound parameters. and i am unable to find a process code for this Message type in WE41. So what process code should i use in the Message control tab against the custom output type?
3). Do i need to leave the message control tab empty without making any entry? If yes then how would the system come to know that it needs to trigger this partner profile when the custom output type is proposed by the system?
will award points for useful answers
Edited by: Workflow learner on May 29, 2008 8:49 PM

"any way"
Applications such as ScreenRecycler, http://www.screenrecycler.com/ScreenRecycler.html, can do it.

Message Control help

Hello all, I am trying to use message control to send an IDoc to XI upon creation of an outbound delivery.
I have tried a few things. In my partner profile under outbound parameters (message control tab) I have set the application: V2 (shipping), message type: LD00 (delivery note), and the process code: DELV (idoc_output_delvry).
However, when I create the outbound delivery it's not kicking off an IDoc. What am I missing? Have I selected the wrong information for message control? I want to use IDoc delvry05
points garunteed.
Message was edited by:
Ethan West

hi,
but did you maintain condition records?
transaction NACE or directly VV21
(you need to see the IDOC in output messages
of the delivery doc)
you can also use LAVA output type but depends if you want to output delivery creation
(delivery notification) or delivery posting
anyway create the condition record and it will work:)
everything step by step in my book:)
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Outbound idoc using message control

i wnt to extend orders05 with a new segment with new fields,that are not being populated by orders05.
I want to know what will be the total process flow so that i can see the idoc values using we02.
my tcode is me23.please help.

Hi,
Use the Exit "EXIT_SAPLEINM_002" to populate the data into Z segments in extended idoc.
In partner profile (WE20) in message control tab you have to give the Apllication as 'EF' , message type and process code as ME10 for Order creation.
Regards,
Bhavana.

Message control tab is not present in partner profile

Similar Messages

Maybe you are looking for