Message Cost Center doesn't exist

Hello,
When I look into the AFBP I see that there was one Run with an error. It says that the cost center doesn't exist at 31.05.2014. Message number: KI222
The cost center exists and is also valid. It also says that the cost accounting circle KORE has been automatically determined from the accounting area.
What coult be the problem? I'm not very good at solving problems at the sector accountancy 'cause I wasn't trained that until now.
lg Carmen

Hi Carmen.
Please check the OSS Notes Below.
16653 - How is the validity of the cost center checked?
1925028 - KI222 when creating assets from posting transaction
Kind Regards.
Jandoval Nascimento

Similar Messages

Cost Center does not exist

Hi,
I have called "BAPI_GOODSMVT_CREATE" to have the goods issue, the posting period of MM and FI are opened but the it returned a message Cost center XXX /1101019 does not exist on DD.MM.YYYY .
Any transaction I need to run for the cost center?

Hi Chung,
Check if that Cost center exists. i think CC is 1101019.
Use txn code ks03 to display the cost center. If its there..then check the validity date for that cost center.
Hope it will give u some idea.
Cheers,
Vikram
Pls reward for helpful replies!!

Error saying cost center/EAT007 validity exists only for 2009

I am trying to upload the HR details from Non SAP to SAP for 2010, using an interface from T.code se38, I am getting an error saying
"Master record for cost center(number)/ EAT007 exists only for 2009".
When I see the cost center validity in KS02, its validity is from 01.01.2009 to 12.31.9999.
Could anybody answer this.

Hi Abhishek,
I am trying to upload the time sheets of the employees from other software to SAP using the Tcode SE38,
Later from HR to Co we are using CATs (Cat2 and CAT7) to transfer the data. Time time sheet contais the details of the sales order against which they have spent time, their time consumption for providing services and also the activity type they have performed.
In SE38, while I am trying to upload the data it shows an error saying "Master record for cost center/EAT007 exist only for 2009".I am trying to upload the data for 2010 Jan to Aug.
When checked, the Cost center's validity in our system is from 01.01.2009 to 12.31.9999.
Please assist.

Cost Center does not exist for a particular period - Solution

We have encountered an error in the subject,
COST CENTER does not exist for a particular period
Solution:
1) Either extend the Posting period for the invoicing date
2) Or enter the Cost Center as PO number in Sales Order
Please do add your comments if there are different ways to solve this error

The Post contains a solution

Getting Cost Center Does not exist error when executing BAPI_ACC_GL_POSTING

Hi Champs,
I am getting Cost Center Does not exist error when executing BAPI_ACC_GL_POSTING_CHECK.
But when I checked for the particular Cost center, it is mapped to the same company code the program has got executed.
Example:
Cost center 1000/150402 does not exist on 17.11.2009.
Cost center 1000/150402 does not exist
Cost center 1000/150402 does not exist on 17.11.2009.
Cost center 1000/150402 does not exist on 17.11.2009.
Please let me know if you have any guess on this. It is very critical issue for me.
Thanks for all your help in advance.
With Best Regards,
Ravi kanth Yechuri

Use 0000150402 not 150402 .
Rob

Creating SO for Matnr in PlantA, Message says Matnr doesn't exist in PlantB

Hello,
I am trying to create a Sales Order for a Material which triggers a creation of Auto Purchase Requistion eventually to Purchase Order.
The Material exists in Plant A and my delivering plant for the material is also Plant A.
When i create the Sales Order for the material i get a message saying Material doesn't exist in Plant B.
I am not sure why Plant B comes into picture, Note: Plant B is one of our another plants.
Can someone provide any inputs.
Best Regards,
Bharat.

Hi Guys,
We have resolved the Issue. Just wanted to update the group what the issue was and how resolved,
We checked the Auto PO flag in the ItemCategory settings and we are using that particualar ItemCategory linked to the Item Category Group in the Material for which we are creating Sales Order.
It seems if the Auto PO flag is checked and since that flag is treated as an EDI enabled one, when a Purch. Req / PO is created is gets the Plant value from the Sales Org settings in the Enterprise Structure (SPRO). In our systems that happened to be Plant B.
Hence when am trying to create a SO (Plant A) and eventually to a Purch. Req / PO it is saying the Material is not present in Plant B.
It took a while for me to digest, but that is what it is.
Best Regards,
Bharat.

I would like to insert new cost center for the existing layout in BCS

Hi,
I would like to add cost center to existing layout.
Currently we are loading data into BCS using flat file .
In BCS we have current layout existed with below format.
Header
Controlling area
Fiscal year
Posting period
Data Rows
Company
Item
Profit Center
Functional area
Trading partner
Period Value LC
Period Value GC
Even we are getting flat file from R/3 as above format.
Now our Business required cost center in BCS as their requirment and need to be bring from R/3 to BCS.
In R/3 our ABAP people are working to bring the cost center from R/3 and made a flat file for us.
In BCS we need to load the file which has new cost center,which was comming as per the new requirment.
Please advise me how to add cost center in Data Rows of BCS.So that it can accomidate new cost center which is comming from R/3.
Please some advise me on this and answer would be appreated.

Prasad,
I knew how to add char to cube in BW.But i am not sure about BCS .
- What's the difference in assigning the infoobject (CostCenter) to the infocube, doesn't matter if it's the basic (ordinary) or the BCS totals cube?
I will follow as you said.
- Taking the BW310 or SEM240 is very useful.
Once it is done then what are the next steps need to do it.
- What's done? What's the question?
I am assigning points to you
- I do not need the points assigned for nobody knows what. Feel free to unassign them.

KP90 error - KI222 - Cost Center does not exist.

Hi gurus,
While executing KP90, I got an error message saying "Cost Center xxxxxxx does not exist on 01/01/2011.
When I checked, the cost center is created from 05/01/2011 to 12/31/2011.
Please suggest any solutions....
1) Can I change the message class for KI222
2) Can I change the from date of cost center.
Please suggest as this in an High priority!!!!!!!!!!!!!
Regards,
Devang

Hi Devang,
As you can see, cost center was created some days after the date that the error message is showing.
You should create for this cost center the missing interval (01.01.2011 to 04.01.2011) and in case you create with the same data the interval will be combined.
Best Regards,
Vanessa.

Error Message Says File Doesn't Exist...

Hello. I'm trying to install a CF website on the same server
with an ASP website which is already up and running. Both sites
will access the same FoxPro data, which may lead to conflicts I'll
have to work around, but first there's another problem I have to
solve: When I try to do an SQL select statement, I'm being told by
an error message that the table I want does not exist, which is
false. Specifically, both the ASP site and my own site use the same
ODBC connection, which specifies the Visual FoxPro driver and the
path to the FoxPro tables (which is all you need to get to FoxPro
tables through ODBC).
It might appear that I should simply have a connection of my
own with a different name, but that seems unlikely because I have,
in fact, already set up a separate connection in ODBC, with a
different DSN (obviously), and pointing to an entirely different
directory where I have placed clones of the FoxPro tables I want to
access. And I did not forget to change the DSN name appropriately
in my SQL select statement. Nonetheless, I receive the same error
message in that situation. The full error message is provided after
the double lines below.
I should mention that I have pointed the ColdFusion
Adminstrator to both ODBC connections (both the one used by the ASP
site and the one used by my clone tables), and I have clicked the
Verify All Connections button, and received a response of 'OK' for
both of them.
I should also mention that my site (including the ODBC access
to clones of the same FoxPro tables) works fine on my desktop PC at
home, and on my laptop.
It occurs to me as I write this that FoxPro itself is
installed on the same directory as the one accessed via ODBC by the
ASP site, but it is my understanding that that should not matter.
Allegedly, all you need is the ODBC driver. Come to think of it,
FoxPro is also on a different directory from the tables on my PC at
home and on my laptop.
Another point which I think should not matter is that the ASP
site and my own are, in a sense, the same site. Different people
will use them, and there is no transportation from one to the
other, but both will be accessed by the same root url until such
time as the company manager decides to get a separate domain name
for mine. To be concrete, the ASP site is in the
'Inetpub\wwwroot\acrc' directory while mine is in
'Inetpub\wwwroot\Reporters'. Both are subdirectories of the Default
web site in IIS, which is Inetpub\wwwroot, accessible by the domain
name 'acrga2.com'. It is my understanding that things should work
even if the ASP dnd CFM pages were were intermixed in the same
directory.
Any suggestions?
=================== FULL ERROR MESSAGE BELOW ================
Error Executing Database Query.
[Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][ODBC Visual FoxPro Driver]File 'joblog.dbf' does
not exist.
The error occurred in
C:\Inetpub\wwwroot\Reporters\ListJobs.cfm: line 6
4 : <cfquery name='Jobs' datasource='ACRDB' debug>
5 : select job_no, job_date, job_time, am_pm, caller_
6 : from joblog where reporter_='#Ucase(Session.UserName)#'
and Year(bill_date) < 2000 and Year(date_chg) < 2000
7 : </cfquery>
8 :
SQLSTATE 42S02
SQL select job_no, job_date, job_time, am_pm, caller_ from
joblog where reporter_='MMM' and Year(bill_date) < 2000 and
Year(date_chg) < 2000
VENDORERRORCODE 173
DATASOURCE ACRDB
Resources:
* Check the ColdFusion documentation to verify that you are
using the correct syntax.
* Search the Knowledge Base to find a solution to your
problem.
Browser Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US;
rv:1.8.1.12) Gecko/20080201 Firefox/2.0.0.12
Remote Address 127.0.0.1
Referrer
http://localhost/Reporters/reporterlogin.cfm
Date/Time 07-Mar-08 12:23 PM
Stack Trace
at
cfListJobs2ecfm1841761115.runPage(C:\Inetpub\wwwroot\Reporters\ListJobs.cfm:6)
at
cfListJobs2ecfm1841761115.runPage(C:\Inetpub\wwwroot\Reporters\ListJobs.cfm:6)
java.sql.SQLException: [Macromedia][SequeLink JDBC
Driver][ODBC Socket][Microsoft][ODBC Visual FoxPro Driver]File
'joblog.dbf' does not exist.
at
macromedia.sequelink.ssp.Diagnostic.toSQLException(Unknown Source)
at macromedia.sequelink.ssp.Chain.cnvDiagnostics(Unknown
Source)
at macromedia.sequelink.ssp.Chain.decodeDiagnostic(Unknown
Source)
at macromedia.sequelink.ssp.Chain.decodeBody(Unknown Source)
at macromedia.sequelink.ssp.Chain.decode(Unknown Source)
at macromedia.sequelink.ssp.Chain.send(Unknown Source)
at
macromedia.sequelink.ctxt.stmt.StatementContext.execDirect(Unknown
Source)
at
macromedia.jdbc.sequelink.SequeLinkImplStatement.execute(Unknown
Source)
at
macromedia.jdbc.slbase.BaseStatement.commonExecute(Unknown Source)
at
macromedia.jdbc.slbase.BaseStatement.executeInternal(Unknown
Source)
at macromedia.jdbc.slbase.BaseStatement.execute(Unknown
Source)
at
coldfusion.server.j2ee.sql.JRunStatement.execute(JRunStatement.java:254)
at
coldfusion.sql.Executive.executeQuery(Executive.java:1196)
at
coldfusion.sql.Executive.executeQuery(Executive.java:1008)
at coldfusion.sql.Executive.executeQuery(Executive.java:939)
at coldfusion.sql.SqlImpl.execute(SqlImpl.java:325)
at
coldfusion.tagext.sql.QueryTag.executeQuery(QueryTag.java:831)
at
coldfusion.tagext.sql.QueryTag.doEndTag(QueryTag.java:521)
at
cfListJobs2ecfm1841761115.runPage(C:\Inetpub\wwwroot\Reporters\ListJobs.cfm:6)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:192)
at
coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:366)
at
coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
at
coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:279)
at
coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48)
at
coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at
coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.CfmServlet.service(CfmServlet.java:175)
at
coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
at
coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
at
coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:284)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

I have now discovered that my site does work when it's
accessed from outside using its full url,
www.acrga2.com/Reporters/ReporterLogin.cfm.
Nonetheless, it would help my understanding of the technology
to know why I could not access it directly from the server. After
all, the whole thing was developed working as localhost on a single
PC. But I was not able to access it from the server I just
installed it on, neither as localhost nor with the full url,
www.acrga2.com/Reporters/ReporterLogin.cfm.
Or rather, more accurately, I could access the site, but I
could not connect to the FoxPro database via ODBC from within the
site.
I realize this is an arcane issue - very few people outside
of old codgers like me still program in FoxPro - but it would be
interesting to know why this occurs. Any ideas anyone?
Anyway, I was really worried. My client was NOT pleased. But
now he's happy again. Whew!

Can't display COPA datasource...message table entry doesn't exist

Hi,
I am trying to display my COPA datasource and it's giving me a message stating it can't because a table entry is missing. In debugging I can see the table entry it's reading is tkebwlgn.
I've tried everything, but cannot display/delete this.
Any suggestions?
Thanks.

I resolved this by executing RSA6 and making a "change" by selecting a field as selectible and saving. Then went back in and unchecked it and saved it.
The table entry then appeared and the datasource could be viewed.
Just in case someone else comes across this problem.

Cost center error when posting to a fund - Message KI222

Hi,
We are getting error KI222 when we try to post to a fund. The message says Cost center XXX/ABCD does not exist on xx/xx/xxxx. The problem is we do not have a cost center called 'ABCD'. Note 315350 has already been applied in our system.
Has any one seen this error? if so, how was it fixed?
Thanks.

Hi
I am also running into this issue. I am trying to post a cash discount and system is throwing this error that cost center does not exist on this date. But we do not have any cost center with that number.
Were you able to resolve your issue? If so, can you please share the solution. I appreciate your help.
Thanks,
Shalu

Adding Cost Center to existing account

We found out that we need to add a cost center to an existing account that has a couple journal entries posted to it.
What is the correct way to go about this?

Hello,
I'm worried but you can not assign cost center to posted items. There is one way I thought that, If you don't create a cost element for this account yet, please transfer amount to a dummy account without cost center(if cost element created for this account please use DUMMY cost centers) and then you can create a cost element for this account. After that you can transfer amount from dummy account to cost element with correct cost center.
Regards,
Burak

Want to check whether cost center exists or not during payroll process ?

Dear All,
Requirement is to throw an error for an employee during payroll run if the cost center does not exist.
I guess this may be achieved by PCR only. There is an operation OUTWPCOSTC which can help.
Issue is that there are parameters like VALEN and VAOFF which need to be taken care of while using OUTWPCOSTC.
Also, when cost center is not assigned, its value in WPBP is BLANK. How to query a BLANK value in PCRs?
Can any help on this with an complete example?
Regards,
Ankit

Hi Ankit,
Try with PCR
VALEN 1
OUTWPCOSTC
Update the PCR in sub schema COPY Z002                  Edit basic data
000040 WPBP                        Read Work Center/Basic Pay Data
000050 GON                         Continue if Data is Complete
000060 ACTIO ZQ14 GEN              Check if cost centre exits
000070 BLOCK END                   Edit basic data
This will help you while runing the Payroll.
Thanks & Regards
Vikram Mali

Error message "Address doesn't exist "

Dear Experts,
In ME23n, when i give some purchase order and click on ADDRESS tab it is giving the error message as "'Address doesn't exist 51457447 4601225079"", And when i check the address in ADRC table for the same vendor via ADRNR number it is providing the address
And also it displays the address in the smartform preview.
But same is not populated in the ADDRESS tab.
Anybody help
Regards,
Venki....

Venki,
I once had exactly the same problem and message. It turned out that the error message was misleading..
In my case, a (custom) function module was returning an exception WITHOUT specifying a message. Subsequently the calling program also returned an exception, and simply reported the last message sitting in the SYST structure.
I recommend you set a breakpoint on the MESSAGE statement when debugging.
cheers
Paul Bakker

Profit Center does NOT exist on 08/24/2010 (Message KM700)

Hello,
I am using resource related billing.
I am adding a Contract Line Item to an existing contract.
In this Contract Line Item I am entering a wbs element for whichc the associated profit center has an effective date
of 01/01/2011.
The Contract Header has a document date of 08/24/2010
After entering the wbs element in the new contract line and hitting enter I receive the below warning message:
Profit center ###/##### does not exist for 08/24/2010
Message no. KM700
###/##### = Controlling Area/Profit Center
Is there a setting that can be switched off so that the warning is NOT displayed ?
Thanks
Ermanno.

If it is warning message, the user can leave as it is. If it is error then in t.code KE52, you can change the validity period by clicking the change validity period button. Change here validity period from date 08/24/2010, thereby you can avoid this message.
Does this answer your question? If not why you want to remove the warning message? It looks it is standard message, used by more than one program.
Regards,

Message Cost Center doesn't exist

Similar Messages

Maybe you are looking for