Message could not be delivered to mobile.

Suddenly I'm unable to send a pic message to my phone via email. I've always been able to send pics that I've uploaded to my computer from my digital camera through my email program using [email protected]
Now when I sent one I get an error message via an mail from MMSC NDR Administrator ([email protected]) that says:
Subject is: Undeliverable message
Message could not be delivered to mobile.
Error: Failed Parsing MM3 headers
I can send a message from my email using [email protected] but not even a plain text email will go through using [email protected]
Anyone else having this problem?
Any suggestion as to why this has started happening?
Thanks in advance for any info!

DreaminLg wrote:
Suddenly I'm unable to send a pic message to my phone via email. I've always been able to send pics that I've uploaded to my computer from my digital camera through my email program using [email protected]
Now when I sent one I get an error message via an mail from MMSC NDR Administrator ([email protected]) that says:
Subject is: Undeliverable message
Message could not be delivered to mobile.
Error: Failed Parsing MM3 headers
I can send a message from my email using [email protected] but not even a plain text email will go through using [email protected]
Anyone else having this problem?
Any suggestion as to why this has started happening?
Thanks in advance for any info!
Are they in JPEG format? Did you try from another e-mail address besides just the one?

Similar Messages

"message could not be delivered"

MAILER-DAEMON are replying that message can not be delivered when sendin to my mac addresses!?
this started last night.
I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.
For further assistance, please send mail to postmaster.
If you do so, please include this problem report. You can
delete your own text from the attached returned message.

Nothing made sense I thought but I just recieved an answer from my web host and they explained it like this:
Our technicians are aware about this issue and they have contacted the proof point support to get the block removed
This should be done in the next couple of days and then you shoudl be able to send emails without any issues
No explanation though why there was a block.
Thanks

Message could not be delivered. Never happened with Entourage.

I have tried to migrate from Entourage to Mail. However, I keep getting the message could not be delivered....message. After the message sits in the outbox for a while some messages will finaly send. I have checked the outgoing settings and everything seems to be acurate. I've searched the boards and others seem to have this problem. I've moved messages to the draft folder, trashed the Outbox.mbox, relaunched. Nothing seemed to make a difference. I'm sending the exact same way with the same equipment (besides the computer, new MacBook) and never had this problem with Entourage.
Any Ideas?
Many thanks!
Trey

At my friends house (where I never used to have a problem) or here in the Atlanta airport I keep getting this message.
This is probably because the ISP at those locations are blocking the ports you need. If you want to send e-mail messages from those locations, you will probably need to use the outgoing mail server for that ISP.
When I visit the in-laws I use their ISP's outgoing mail server. When I am at a hotel usually the only way to send mail is via a web interface to my account.

This message could not be delivered because your SMTP settings are not set. Please use the Accounts Preferences panel to set the SMTP options for your account.

I am not able to send out an email. I keep getting the following message: This message could not be delivered because your SMTP settings are not set. Please use the Accounts Preferences panel to set the SMTP options for your account. Can someone help me with this?

We need some information, starting with the email provider (eg. Google, Yahoo, Bellsouth, etc)

This message could not be delivered?

I bought a .Mac account and it set up everyone on my computer automatically. When I open Mail and try to send mail I get an error message saying:
This message could not be delivered and will remain in your Outbox until it can be delivered.
The connection to the server "smtp.mac.com" on port 25 timed out
I can receive mail just fine, but I'm having this issue sending out mail. Any help would be appreciated.

Some ISPs block access to SMTP servers other than their own to reduce the amount of spam sent from their networks; outgoing SMTP traffic uses port 25. Either contact your ISP, use your ISP's mail server, or use a webmail service to send mail.
(23608)

Why is Messages saying all my Sent messages "could not be delivered" when they have gone through?

Within the last few days, Messages on my Macbook Pro (Retina, 15") is showing the "could not be delivered" red circle with a white "!" after every message I send out to another Messages user. I can see that the messages were delivered by looking at the same thread on my iPhone (iOS 7.1) and the recipient gets all of them as well. The recipient is seeing these messages appear on their iPhone -- and likely their iPad mini as well.
I've tried deleting the conversation and restarting the Macbook Pro thinking it could be a temporary glitch. The problem still occurs, though. Everything I send from Messages on my laptop (to the same user) shows as not having been delivered, though they have been.
Any thoughts? Solutions?
Thanks in advance!

Hi,
Once you have sent an iMessage the server "pushes" at the contact and all the devices they have linked to the iPhone Number or Apple ID.
It continues to Push for some time if one devices does not give a response.
However in the meantime the iMessage may have been delivered to an iPhone of iPad.
It may not get delivered to a Mac for instance and it is the feedback that this has not happened that can give you the "Not Delivered" message.
Of course that are variants depending if you are "aiming at" the iPhone Number rather than the Apple ID and if the iPhone is not on WiFi or a suitable Carrier alternative like 3G.
It's a bit like sending an email to 20 people and only getting 19 acknowledgements.
8:32 pm Tuesday; April 1, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Error:Message could not be delivered will remain in Outbox

The error message further states that "The server*** cannot be contacted on port 25" This happens when the computer is sleeping and an alarm is sent from iCal. On my older computer, the mail would open automatically and display the alarm message as soon as I opened the computer. No it opens but gives the above error message. Do I need to change a setting of some kind?
Macbook Mac OS X (10.4.8)

Thanks for responding
Is this email account and SMTP server provided by your ISP used for connecting to the internet or an email account provider only that is not associated with your ISP?
This email account is associated with my ISP.
I have no other problems forward, sending or receiving mail on this account. The only problem remains when iCal sends an alarm and my computer is in"sleep" mode. Then the message stays in my Outbox and won't be delivered.

Mail hangs when it receives a report that an e-mail could not be delivered.

Hi Guys :o),
One bug which is really bugging me is that every time I receive a bounced e-mail report, with a subject line containing words to the effect of:
"Undeliverable. Return to sender."
or:
"The message could not be delivered."
Mail is unable to pull any subsequent e-mails down from the POP server.
So I junk the report, and then I delete it.
However, lo and behold, the errant e-mail is INSTANTLY back in my Inbox, plus there's now AT LEAST one copy in my Mail Junk, and also AT LEAST one copy in my Mail Trash.
Round and round I go, junk, delete, junk, delete, but the errant e-mail refuses to go away, and Mail continues to be unable to pull any new e-mails down from the POP server.
Eventually, Mail just hangs, with a spinning disk.
Even a force quit and relaunch of Mail doesn't resolve the spinning disk.
The errant message just sits there, REFUSING to be deleted.
The only way to get round this bug is for me to go up to my POP server, delete the report, and then PURGE DELETE the report - on the POP server !
I then have to go in to my Mac, and go:
--> Users --> Home --> Library --> Mail --> Account --> Inbox, Junk, and Deleted
and then manually drag ALL copies of the report into the trash on the Desktop.
It happens so often (pretty much every day) that I've had to create a shortcut in my Dock which leads straight to the Account folder.
Mail has always been buggy under ALL versions of OS X, but this ongoing bug drives me crazy, mainly because there's NO logical reason for it.
Just because I receive an e-mail message from the Hotmail server, for example, which says that my e-mail could not be delivered, usually because the recipient's inbox is full, or because no such address exists, on paper, that's just another e-mail which Mail is pulling down from the POP server.
However, EVERY TIME I receive such a report, Mail hangs.
I'm reluctant to rebuild my Mailboxes, in case I lose any messages, but I will if you advise it.
Any workaround would be gratefully received.
With best wishes to everyone in the Apple community, especially those on the Infinity Loop.
In particular, I wish Mr Jobs a very speedy recovery.
Cool,
Michael T
London, England

Quit Mail, Right click on that Mail folder, choose archive, you'll get everything in the folder, and the folder itself in a file called Mail.zip, move it to a safe place, same for the Mail Downloads folder... only the plist is separate.
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup

Post CUPS 8.5(3) upgrade getting CUPC "did not receive your message because it could not be delivered".

I upgraded CUPS from 7.0(2) to 8.5(3) and now CUPC 7.1(1a) clients can’t chat each other, they now get the following message.
Rose, Bob did not receive your message because it could not be delivered. (3:14 PM)
Wireshark shows response back from CUPS server ip as 408 Request Timeout.
Only the server was upgraded, not the clients.

After several hours with Cisco TAC we found CSCsl63971 (case-sensitivity on proxy domain causes CUPC problems) and were able to resolve the issue so users can continue to use CUPC 7.1(1)

AIM IM The message "Hello" could not be delivered. The other person appears to be offline. The user is not accepting offline messages. How do I change this setting?

AIM IM The message “Hello” could not be delivered. The other person appears to be offline. The user is not accepting offline messages. How do I change this setting?

HI,
The simple shortest answer is that you can't (Change a Buddy's settings)
From your own end you can reply to the first Off Line IM you get on an AIM login (an accompanying IM for AIMSysMessage asks if you want them to Continue - replying No stops them)
IF you have stopped Off Line IMS than you can reset this at AIM Settings
You can log in here with AIM and Apple IDs that end in @mac.com and @me.com (iCloud issued @me.com name are an Exception)
In addition the Setting in iChat > Preferences > General Section that refers to setting the Status to Off Line on Quit stops the App starting up if iChat is not launched but the computer is ON
8:16 PM Friday; March 23, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g. I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service". How do I fix it?

Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g. I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service". How do I fix it?
I've contacted o2, tried all of their suggested updates and changes, reset my phone 3 times and still no luck.
Any help appreciated.
Thanks,
Louisa

Hi, l have the same problem, were you able to resolve?

My text messages are not being delivered

MY text messages are not being delivered. Keep coming back with the red saying "Not Delivered". Anyone know why this all of a sudden started happening and how to fix it?

Thank You Meg St._Clair contacted my carrier and fixed the problem on my iPhone 6 but still an issue on my iPad mini
Carrier could not fix the problem so said I would have to plug my iPad into my Mac and back it up and then restore factory settings
Havent done any of that yet!

Message could not be forwarded to the JCA adapter

Dear all,
I am facing the issue:
i am trying to send files to sftp server via SFTP adapter but in the receiver channel I am getting this error:
Message could not be forwarded to the JCA adapter. Reason: 3: Putting /folder1/folder2/10124__20140603-152747-700.txt failed.
exception caught with cause javax.resource.ResourceException: 3: Putting /folder1/folder2/10124__20140603-152747-700.txt failed.
Adapter Framework caught exception: 3: Putting /folder1/folder2/10124__20140603-152747-700.txt failed.
Delivering the message to the application using connection SFTP_http://sap.com/xi/XI/SFTP failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: 3: Putting /folder1/folder2/10124__20140603-152747-700.txt failed..
I am not able to keep the files in folder2.
there is no problem in access rights.
I am able to access the same from Putti but from channel i m unable to do so.
Please help.

Hi Sinha,
Thank you for the response, I might not have written the issue correctly.
Remove Spaces in EDI Files
Please refer the above blog, we are facing a simmilar issue, when we remove those spaces the file works correctly. But when the files are transmitted we have a single stream of characters and there is a space after the IEA segment and the next ISA Segment.
Regards,
Pranay

To recipient Unknown could not be delivered [Error:80040919]

To All
I have unity 7.0 (2) running and the problem is that no voice mail is been received id mailbox.
In the event loggin I see the following:
Event Type:    Error
Event Source:    CiscoUnity_UMR
Event Category:    UMR Thread Error
Event ID:    113
Date:        6/14/2013
Time:        3:42:01 PM
User:        N/A
Computer:    VIPNLAP501
Description:
A message with the subject:
<Unknown>
to recipient <Unknown> could not be delivered [Error:80040919]. It was moved to the failed directory. This can occur for several reasons: the recipient mailbox may be disabled or inaccessible, Cisco Unity may be having trouble connecting with the partner server, or the Cisco Unity messaging component may not be properly configured. If this condition persists, contact Cisco TAC. 0x00000C94
And what I see is also that the is no sync on ldap, this last I have seen this bevore and solf the the problem but now I can not see where it is going wrong.
It is no unity connect.
Please help,
Thanks
Regards,
Jan Meeling

Hello Jan,
The PW (Permission Wizard) is found on the Tools Depot> Administration Tools> Permision Wizard. If you right click on it and select properties you will be able to see the version. If you do not have the latest vesion (v. 3.0.0.7) you should start by installing it.
Go to:
http://ciscounitytools.com/SiteList/AllDownloads/alldownloads.html
Under Title search for:
Permissions Wizard 5.0(1)+
Running the Permission Wizard is required with a Domain Admin account, usually the Unity Install account has this included, to verify, go to Start> Run> dsa.msc> Click on Find> Type Unity Install> Click on Member of tab.
Additionaly this utility does not involve any downtime to your environment. At the beginning of the Wizard confirm that the proper accounts are assigned to the services, i.e: Directory Services-> UnityDirSvc, for Message Store-> UnityMsgStore. When yo reach the point to select the Mail Stores make sure that all the proper or desired mailstores are included.
At the end if it fails for 1 item, and it is permissions to delete objects this can be expected.
To fully understand this tool and see screen shots of running the tool go to:
http://ciscounitytools.com/Applications/Unity/PermissionsWizard/Unity50/Help/PWHelp_ENU.htm
The MSCW (Message Store Configuration Wizard) is a tool used to partner and synchronize with your Exchange server and is found in Start>Control Panel> Programs> Add Remove Programs> Doble click on Message Store Configuration Wizard. Running this tool is service impacting, meaning it requires to stop Unity services.
At the end of the Wizard you are prompted for a last account, which is the Directory Service account, make sure you are using the proper one, i can't stress this enough.
It would also be good to ensure that your Unity System is able to communicate accordingly to your Domain Controllers and Global Catalog. You can check this by going to Tools Depot> Administration> DCGC Reconnect> Click on the DC tab hit Force Reconnect do the same in the GC tab (this is again NOT service impacting). After you do that go to Event viewer (eventvwr.msc)
One event will be seen with the Domain Controller:
The Cisco Unity service that monitors Active Directory (AvDSAD) completed a full
synchronization cycle with
Another will be seen with the Global Catalog:
...event global catalog (AvDSGlobalCatalog) completed a full synchronization cycle with ...
If you do not see a complete synchronization there might be issues in your network or to the DC GC's Unity is talking to and therefore not able to retrieve the proper information of the users.
If you run DBWalker does it give you any further insight?
It would be usefull if you could clarify whether this issue is
-for all users: mayor changes on either Unity or Exchange
-a set of users:random or specific to a mailstore
-single user: are there any differences in Exchange between the working users and the non-working one; is it disabled on AD?
Best regards,
David Noel Rojas Peck
Email: [email protected]
Mon, Wed, and Fri 12:00 pm to 9:00 pm ET, Tue and Thu 8:00 am to 5:00pm ET
Cisco Worldwide Contact link is below for further reference.
http://www.cisco.com/en/US/support/tsd_cisco_worldwide_contacts.html

Action Required: Your book could not be delivered to the iBookstore

Hi Everyone,
I had a book up on iBooks without any problems but an editor found a couple of corrections that needed to be addressed. Those are now corrected but the problem I am running into now is right after the package is delivered, I get an email telling me that the book could not be delivered to the iBookstore. The message tells me that two image files are too large (larger than two million pixels). This is perplexing to me in a couple of ways; 1.) I did not edit any of the image files, only text and 2.) the filenames mentioned in the email are no where in the original Pages document.
If anyone has some suggestions, I'd greatly appreciate it!!
Many thanks

You think it's a book?
's going to approve?

Message could not be delivered to mobile.

Similar Messages

Maybe you are looking for