Message "Customizing incorrectly maintained" in IW42

Hi All,
Our client system has been recently upgraded to ECC 6.0. And after that when i am executing transaction IW42, i am getting this message "Customizing incorrectly maintained". Though i am able to successfully complete and save the whole process but still this message is being displayed. I am not getting this kind of message in IW41 or IW44. I have checked configuration settings, but dint find anything missing. Has anyone encountered such type of message. Am i missing out on any configurations. Please help
Looking forward to your reply.
Regards,
Shobha

Hi
I saw your reply to shoba_pillai25.
Nice solution
what is the need of setting profile and maintaining tables in SM30?
What it will do exactly?
What are the other profiles to be maintained during configuration?
Regards,
Alagesan.M

Similar Messages

  • Customizing incorrectly maintained Message no. SE729 in Tcode:IW42

    Hi All,
           When I am Working on Tcode: IW42.I am getting message
    *Customizing incorrectly maintained
    I have checked all the customization, all are maintained properly.I have not maintained order and notification integration.I thought It might be because of the integration the warning message might be coming.
    I have gone through the SDN related to message SE729.
    But after referring to few threads I came to know its issue of updgarde,Please correct me If I am wrong.Please suggest me suitable solution to solve my problm.Any suitable note,please suggest.
    Thanks and Regards,
    VJ

    Hi VJ,
       What upgradation you are doing? Is that Technical or Functional? From which version to which version you doing the upgradation.
    Regards,
    Maheswaran.

  • Customizing incorrectly maintained in ML81N

    Dear Sappers,
    Whenever I do ML81N ,system is generating the message Customizing incorrectly maintained. Message No. SE729
    I have the updated version of ECC 6.0
    Whenever I try to save service entry sheet ,instead of showing the message for material document created it is showing the message customizing incorrectly maintained
    I have searched all the threads related to this issue on SDN Forum .I changed my configuration according to these threads but the message is continued appearing in that particular screen
    I tried the OSS Notes 1067124,1020850  but thses are not effective

    Hi,
    Suggest to sit with ABAPER and work with going into debugging mode. Try this and hope you can trace the possible reason for the error.
    Hope this helps.
    Regards,
    Smitha

  • Customizing incorrectly maintained message is appearing in SES, w/o Mat Doc

    Dear all
    Customizing incorrectly maintained message is appearing in service entry sheet in ML81N without showing the mat doc no.  We want to get rid off this message and material document number has to appear.
    When we create SES message came "Customizing incorrectly maintained" & Message no. SE729. When we release the SES then Material Document is not showing in foreground.

    Dear Santosh,
    Reason and Prerequisites
    You have recently made an upgrade
    Number of entries in table T162V is different to the number of columns in table control for screen SAPLMLSP/400.
    Solution
    The variants maintained before and after upgrade are probably different.
    Since different customers maintain different number of entries for each variant, it would not be possible to release a standard note to all customers to fix this. Moreover this cannot be fixed using the Note Assistant, the changes have to be done manually.
    The entries in the Table 'T162V'(for each of the 6 variants) should always be the same as that of the columns in the table control(TC_View).
    Table Control(Screen)  Screen 400 SAPLMSP(TC for services ).
    Below is the standard logic to verify if the customising is correct.
    Determine number of lines in customizing tables
      describe table t162v_tab lines lv_t162vlines.
    Determine number of columns in table control
        describe table tc_view-cols lines lv_tclines.
      lv_tclines = 6 * lv_tclines.
      Here 6 signifies the 6 variants for the TC.
      if lv_t162vlines ne lv_tclines.
        message s729.
      endif.
    Please make sure that the entries maintained in T162V are the same as the columns maintained in the Table Control (TC).
    For this case, you can use SM31 transaction to maintain the same number of entries in table T162V as in TC.
    Please see the attached files "SE729_A.doc" and "SE729_B.doc" for further help, that explain exactly how to check the situation and how to use SM31.
    The most important thing is that you have the same number of entries in lv_t162vlines as in lv_tclines.
    After all changes are made please test the behaviour again.
    =======================================
    Issue two
    The button for services selection is missing and when you want to record a new entry sheet, the system show messagge SE 729.
    This is owing to the incomplete coding of the user-exit that must be performed by the user.
    When the SAP enhancement SRVEDIT is not active, the call of the user-exit is not performed and the value of I_EDIT_KZ is set to 'X', and never changed.
    When you activate your project, which contains the SAP enhancement, you
    need to write the code of the include ZXMLUU18, so that the export parameter E_EDIT of EXIT_SAPLMLSR_001 returns a value. Without code, the parameter value will be blank, hence I_EDIT_KZ will be blank, and the end result is the [Service selection] button disappears. Time out's can also be a result.
    Regards
    Utsav

  • Getting a message that "Customizing incorrectly maintained"

    when i go for control key PM03 in Maintenace order and click on ACT DAtA to see the purchase requisiton i get a message that Customizing incorrectly maintained
    Message no. SE729
    which customizing have i missed?

    Hi,
    Check that there is a default 'unit of measure at item level' defined in MM customizing:
    > External Services Management > Source Determination and Default Values
    -for Client
    -for Purchasing Organizations
    If no unit of measure is defined for the purchasing organisation level then it must be made available at client level. If both are blank then message SE729 is issued.
    -Paul

  • "Customizing incorrectly maintained Message no. SE729 "

    Hi Friends,
    While making 'ML81N' for service purchase order  at the time of save , system gives me following error message.
    "Customizing incorrectly maintained Message no. SE729 "
    Regards,
    Mahesh.

    Hi,
    Me too was facing the same issue few days back, resolved by this thread.
    Customizing incorrectly maintained Message no. SE729 - ML81n
    Re: Cutomizing incorrectly maintained - check for the answer from 'AV'
    Regds,
    CB

  • Customizing incorrectly maintained at service entry sheet save time

    Dear PM Guru's
    we are using ECC 6.4 , while confirm and save the service entry sheet, system gives information message as Customizaing incorrectly maintained instead of document posted information. we are trying in somany ways but we cant solve the issue. please help me to avoid such a issue. here i am not getting any document posting information.
    i am requesting all the PM experts please help me.
    thanks,
    jalu

    Hi,
    I think it is the same problem as I answered in this [thread|Getting a message that "Customizing incorrectly maintained";.
    It is possibly a problem with definition of screen SAPLMLSP/400 (services). You will need to follow the instructions in note [1382685|https://service.sap.com/sap/support/notes/1382685]. This note references ML81N transaction but is relevant for the services screen. Check the table entries mentioned to verify and then correct if necessary.
    -Paul

  • Customizing incorrectly maintained

    Hello all,
    while creating a service PR in maintenance order while maintaining the service package I am getting the above error. Message no SE729.
    Also after entring the required data under service I am getting an error 'G/L account XXXXX not created (please check your input) Message no. ME042.
    Please help to resolve this query.
    Mimiri

    Thanks alot,
    My idea is cleared now.
    just two little queries.
    how to maintain the G/L account if I only enter the service text?
    And how to the cost element gets copied from service master, through valuation class? How to change it?
    Mimiri

  • Customizing incorrectly maintained -SE729 at the time of service entry

    Hi Gurus,
    I have above problem in ML81N
    Ill check so many thread in that this type of problem comes under upgradation
    but i am doing in IDES only,
    then,
    how to find the fields in  table T162V and Table Control SAPLMSP(400)
    How to Resolve that,
    thanks,
    Vino

    Hi Gurus,
    I have above problem in ML81N
    Ill check so many thread in that this type of problem comes under upgradation
    but i am doing in IDES only,
    then,
    how to find the fields in  table T162V and Table Control SAPLMSP(400)
    How to Resolve that,
    thanks,
    Vino

  • Cutomizing incorrectly maintained

    Dear All,
    While creating an Service entry Sheet, the System is showing a message " Customizing incorrectly Maintained" Message no. SE729. I have checked all the configuration related to P.org & Client for the SES.
    The system is generating the Correct SES and generating the same number for SES.Also,Same problem I have faced while making changes in the Service PO.While I run the ME21N, as the system opens the ME22N screen the same message (Customizing incorrectly Maintained) displays every time & system allows me to make the necessary changes in PO change & SES.
    I have checked the Note number OSS note 1067124 - SE729. It was initially miss. I have applied the same note but still the prooblem persists.
    Please revert ASAP.
    Ashok Verma

    Hi George,
    I found the reason for SE729. There are 6 obsolete entries in table
    T162V for the field ESLL-/SAPBOQ/CK_QTY.
    These entries - as per note 1020850 are obsolete, so please delete it.
    Table T162V
    VARIANTE SCR_POS SCRFNAME
    0 081 ESLL-/SAPBOQ/CK_QTY
    1 081 ESLL-/SAPBOQ/CK_QTY
    2 081 ESLL-/SAPBOQ/CK_QTY
    3 081 ESLL-/SAPBOQ/CK_QTY
    4 081 ESLL-/SAPBOQ/CK_QTY
    5 081 ESLL-/SAPBOQ/CK_QTY
    I have checked the Note number OSS note 1067124 - SE729, Initially it was miss, Then after applying this I have found that these entries are not necessary after this Note application and should obsolete. So I deleted this and my problem got solved.

  • Customer not maintained in sales area

    when i create sales order system is throwing a error message
    like
    customer not maintained in sales area....
    in va01, after entering sold to party i am getting this error....
    what should be configuration setting for setting this right.... kindly advise

    Hello,
    As told by Venkat, you are required to maintain the Sales Area data.
    By seeing the error there is something that you are missing in Configuration.
    Go to XD02 and extend your customer. You only must have created two segments. Extend the customer to sales are segment.
    Thanks,
    Ravi

  • SAP Custom Code Maintainability Service - SAP AG only

    As an Enterprise support customer I have a quick question on Custom Code Maintainability Service
    We have previously requested this service from SAP and they have generated and gave us the report.
    My question:
    Is this service ONLY being done by SAP, or are we (as customers) also allowed to run this service ourselves?.
    When I look in the services available I cannot find the service to create and run myself. I am currently putting in some serious time to set-up the custom code life cycle management (CCLM). As part of this I would also like to run the service and generate the report myself, as I have done with some other service like TEA (Transport execution analysis)
    I have no problems with using CDMC (Custom development management cockpit) and to generate reports there, but it would be nice to actually run the service and generate the report ourselves.
    Much apreciated your feedback.

    Hi Midhun,
    thank you for your quick response!
    I have already used SOAPUI to test my query.
    >it's creating an xml file in a specific format where you need to pass values to get the output.
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:urn="urn:sap-com:document:sap:soap:functions:mc-style">
       <soapenv:Header/>
       <soapenv:Body>
          <urn:ZGetcustomerWebservice>
             <!--Optional:-->
             <ImCount>5</ImCount>
             <!--Optional:-->
             <ImKunnr>
                <!--Zero or more repetitions:-->
             </ImKunnr>
          </urn:ZGetcustomerWebservice>
       </soapenv:Body>
    </soapenv:Envelope>
    Is this the xml file you mentioned?
    I checked the following blog and tried debugging, but I couldn't see any variables value...
    Debugging Custom Script in Integration Gateway
    Here is my custom code:
    function processRequestData(message) {
       message.setHeader("Authorization", "Basic XXXXXXXX=");
       importPackage(com.sap.gateway.ip.core.customdev.logging);
       importPackage(com.sap.gateway.ip.core.customdev.util);
       importPackage(org.apache.olingo.odata2.api.uri);
       importPackage(java.util);
       importPackage(com.sap.gateway.core.ip.component.commons);
       importPackage(com.sap.gateway.ip.core.customdev.api);
       parentMap = new LinkedHashMap();
       parentMap.put("IM_COUNT", "5");
       //Set the message body back
       message.setBody(parentMap);
       //Logger
       importPackage (com.sap.gateway.ip.core.customdev.logging);
       log.logErrors(LogMessage.TechnicalError, "This is first log"+message.getBody().toString());
      return message;
    Authorization is perfectly working but others are not.
    It would be great if you could have suggestions.
    BR,
    Hanae

  • How can I add a new message(custom text message) to the holiday approval em

    How can I add a new message(custom text message) to the holiday approval email-notification sent to the manager?
    TIA

    The answer is 'not very easily', unless the information you want to display is the employee's leave balances. In 12.1.3 Oracle have delivered functionality that allows you to include the leave balances in the approval notifications out-the-box, ie, without customization.
    For any other information you're probably going to have to customize the standard delivered HRSSA workflow. Within this workflow, the Leave of Absence functionality uses the Notify Approver (Embedded) (HR_APPROVER_NTF) notification. The body of this notification is set to the Notify Approver (Embedded) (HR_NTF_EMBEDDED_REGION) attribute. This in turn defaults to:
    JSP:/OA_HTML/OA.jsp?OAFunc=-&HR_EMBEDDED_REGION-&NtfId=-&#NID-
    So essentially you can change the HR_APPROVER_NTF notification. The problem with changing this notification is that it's generic - it's used for all SSHR functions and not just Leave of Absence. That means you have to make other, more substantial, customizations to the workflow to ensure the changes you make only applies to LOA.
    The other option is to personalize the review page (ie, the region referenced in &HR_EMBEDDED_REGION) to include whatever messages you want. But that means they'll appear on the Review page and all LOA approval notifications and that might not be what you want.
    It's usually better to live with what Oracle deliver and find an alternative solution! What's the content of the message you want to include?

  • Item category determination customizing not maintained error in CRM_IC

    Hello Solution Manager Gurus
          I have configured IC Web Client.. But in service ticket tab i am getting Item category  customizing not maintained error. Similarly i dont know where to create SLA information for service ticket in solman system.
    Please help me
    regards
    Naveen

    Sure Naveen
    I think you have my email id with you
    And for the customization guide of Webclient, it is available on http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
    C78: CRM Interaction Center (WebClient)
    Hope this will help
    Regards,
    Rekha Dadwal
    <b>You gain a point for every point that you reward. So reward helpful answers generously</b>

  • Why does the System message-"Customer Num of customer is on hold" appear

    Hi,
    I created a UDO form with a field named “Customer Code” that represents a code of a customer.
    Pressing TAB over the field enables to choose a customer from a list.
    The list is based on Choose From List system object.
    When I choose a customer, who is on hold, I get a system message:
    “Customer <Number of customer> is on hold. Changes cannot be saved. Do you want to proceed?”
    This message is irrelevant because the purpose of the form is searching and displaying data.
    Why does this message appear, and how can I avoid it?
    Thanks in advance.
    Shai.

    Maybe, just after you select the customer from the choose from list, and just before you show it in you form, thus, making the msgbox appear, you can check if the bp is frozen and manage to click in the ok button of the msgbox using UI api....
                       Hope it helps,
                              Jon Arranz

Maybe you are looking for