Message delivery noticification problem after 60.0...

hi,
i recently updated to 60.0.003
even with the warning tones "off", i get the msg delivery report with the msg tone.
the screen flashes with the delivery report and it also rings with the msg tone.
this wasnt a prob b4 the update.
anybody else has the same prob?
how do i avoid this?
plz reply..

farby wrote:
...and what about Re-installing the Firmware ?
yes.. that too.. but the problem still persists..

Similar Messages

HT4623 Hi, There was ios 4.1 in my iphone3gs.i have tried to update it through itunes but there is a problem.After installation through itunes,there is problem that it is not activating my iphone and shows a message that your iphone could not be ac

Hi,
There was ios 4.1 in my iphone3gs.i have tried to update it through itunes but there is a problem.After installation through itunes,there is problem that it is not activating my iphone and shows a message that your iphone could not be activated because the activation server is temporarily unavailable,try connecting your iphone to itunes to activate it,or try again in a couple of minutes.i tried many times but it again shows the same message,
after installation,when i connect my iphone to itunes it shows a message that we are unable to activate your iphone at this time please try again or contact customer care.please reply me urgently to resolve this problem.

That is usually a symptom thet the phone was hacked or jailbroken. Was it?

HT4623 I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

I am facing the same issue! I bought 5c few days back
and everything was fine till I updated the software 7.0.4!
Whenever am connected to wifi am unable to make a call and if someone tries
Calling me they get the message that my number is not
Reachable! When I go back to 3G the calls work perfectly!!
Please help me out since I use wifi more than my network.
Appreciate any advise on this

Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Hello, I have a problem on FCP 7 message (error: memory saturates) after (command R) for rendering, cordially

Hello, I have a problem on FCP 7 message (error: memory saturates) after (command + R) for rendering, cordially

Do you use still images in your edit? Make sure all your images are RGB (not CMYK etc).
Hope it helps
Andy

I am having a problem opening pdf files. I get an error message saying a problem has occurred with the licensing of this product. Restart your computer and re-launch your product. If this problem still occurs after restarting ... error code:213:19 Can

I am having a problem opening pdf files. I get an error message saying
a problem has occurred with the licensing of this product. Restart your computer and re-launch your product. If this problem still occurs after restarting ... error code:213:19

Hi AdobeFiles,
I'm sorry to hear that you're unable to open PDF files. Please see this Help document: Error 213:19 | Problem has occurred with the licensing of this product | Acrobat X and XI for solutions.
Let us know how it goes!
Best,
Sara

JMS Provider Responsibilities For Concurrent Message Delivery

Hi,
(This question pertains to the JMS api, outside a j2ee container)
Is it JMS-provider dependent on how concurrent message delivery is implemented? In other words, the code below sets up multiple consumers (on a topic), each with their own unique session and MessageListener and then a separate producer (with its own session) sends a message to the topic and I observer that only (4) onMessage() calls can execute concurrently. When one onMessage() method exits, that same thread gets assigned to execute another onMessage().
The only thing I could find on the matter in the spec was section in 4.4.15 Concurrent Message Delivery and it's pretty vague.
It's really important because of the acknowledgment mode. If it turns out that I need to delegate the real work that would be done in the onMessage() to another thread that I must manage (create, pool, etc), then once the onMessage() method completes (i.e., after it does the delegation to another thread), the message is deemed successfully consumed and will not be re-delivered again (and that's a problem if the custom thread fails for any reason). Of course, this assumes I'm using AUTO_ACKNOWLEDGE as the acknowledgment mode (which seems to make sense since using CLIENT_ACKNOWLEDGE mode will automatically acknowledge the receipt of all messages that have been consumed by the corresponding session and that's not good).
My JMS Provider is WL 9.1 and the trival sample code I'm using as my test follows below. I also show the ouput from running the example.
thanks for any help or suggestions,
mike
--- begin TopicExample.java ---
import java.io.*;
import java.util.*;
import javax.naming.*;
import javax.jms.*;
import javax.rmi.PortableRemoteObject;
class TopicExample {
public final static String JMS_PROVIDER_URL = "t3://localhost:8001";
public final static String JNDI_FACTORY="weblogic.jndi.WLInitialContextFactory";
public final static String JMS_FACTORY="CConFac";
public final static String TOPIC="CTopic";
public final static int NUM_CONSUMERS = 10;
public static void main(String[] args) throws Exception {
InitialContext ctx = getInitialContext(JMS_PROVIDER_URL);
ConnectionFactory jmsFactory;
Connection jmsConnection;
Session jmsReaderSession[] = new Session[10];
Session jmsWriterSession;
TextMessage jmsMessage;
Destination jmsDestination;
MessageProducer jmsProducer;
MessageConsumer jmsConsumer[] = new MessageConsumer[10];
MessageListener ml;
try
// Create connection
jmsFactory = (ConnectionFactory)
PortableRemoteObject.narrow(ctx.lookup(JMS_FACTORY), ConnectionFactory.class);
jmsConnection = jmsFactory.createConnection();
// Obtain topic
jmsDestination = (Destination) PortableRemoteObject.narrow(ctx.lookup(TOPIC), Destination.class);
// Reader session and consumer
for (int i=0; i<NUM_CONSUMERS; i++)
jmsReaderSession[i] = jmsConnection.createSession(false, Session.AUTO_ACKNOWLEDGE);
jmsConsumer[i] = jmsReaderSession.createConsumer(jmsDestination);
jmsConsumer[i].setMessageListener(
new MessageListener()
public void onMessage(Message msg) {
try {
String msgText;
if (msg instanceof TextMessage) {
msgText = ((TextMessage)msg).getText();
} else {
msgText = msg.toString();
System.out.println("JMS Message Received: "+ msgText );
System.out.println("press <return> to exit onMessage");
char c = getChar();
System.out.println("Exiting onMessage");
} catch (JMSException jmse) {
System.err.println("An exception occurred: "+jmse.getMessage());
// Writer session and producer
jmsWriterSession = jmsConnection.createSession(false, Session.AUTO_ACKNOWLEDGE);
jmsProducer = jmsWriterSession.createProducer(jmsDestination);
jmsMessage = jmsWriterSession.createTextMessage();
jmsMessage.setText("Hello World from Java!");
jmsConnection.start();
jmsProducer.send(jmsMessage);
char c = '\u0000';
while (!((c == 'q') || (c == 'Q'))) {
System.out.println("type q then <return> to exit main");
c = getChar();
for (int i=0; i<NUM_CONSUMERS; i++)
jmsReaderSession[i].close();
jmsWriterSession.close();
jmsConnection.close();
System.out.println("INFO: Completed normally");
} finally {
protected static InitialContext getInitialContext(String url)
throws NamingException
Hashtable<String,String> env = new Hashtable<String,String>();
env.put(Context.INITIAL_CONTEXT_FACTORY, JNDI_FACTORY);
env.put(Context.PROVIDER_URL, url);
return new InitialContext(env);
static public char getChar()
char ch = '\u0000';
try {
ch = (char) System.in.read();
System.out.flush();
} catch (IOException i) {
return ch;
--- end code --
Running the example:
prompt>java TopicExample
JMS Message Received: Hello World from Java!
JMS Message Received: Hello World from Java!
press <return> to exit onMessage
press <return> to exit onMessage
JMS Message Received: Hello World from Java!
press <return> to exit onMessage
JMS Message Received: Hello World from Java!
press <return> to exit onMessage
type q then <return> to exit main
[you see, only 4 onMessage() calls execute concurrently. Now I press <return>]
Exiting onMessage
JMS Message Received: Hello World from Java!
press <return> to exit onMessage
[now once the thread executing the onMessage() completes, the JMS providor assigns it to execute another onMessage() until all 10 onMessage() exections complete).

I am too facing the same issue. but in my case I start getting this problem when the message size is about 1 MB itself.
Any help is appraciated.
Regards,
ved

Multiple Samsung Stratosphere problems after FF1 update

There have been multiple posts on various issues users have found after the recent Stratopshere FF1 update. Some were replys to older posts and some only touched on a single issue. I wanted to consolodate into one thread, and hopefully get teh attention of Verizon to maybe reply here.
For reference, a lot has been discuss here --> https://community.verizonwireless.com/message/874446
Summary: Verizon and Samsung have finally updated the Stratosphere almost 1 year after release. This updated the phone from Android 2.3.5 to Android 2.3.6. Going by filename, this is known as the FF1 update. This update went live at the end of August 2012, and most users were upgraded before mid September 2012.
There were some noticable changes in this update:
-Lock screen has changed. The puzzle piece and glass lock options have been removed. New options have been added, such as facial recognition unlock.
-Call answering screen has changed, introducing the option to ignore call with a message.
-Camera now has digital zoom ability.
-Ability to uninstall the 2 games the phone comes with (Need for Speed and Lets Golf)
-Phone icon has changed ever so slightly
-Wifi icon now included up and down arrows to indicate data is being sent or recieved
-Wallpaper no longer "stretches" over multiple screens - ie, it no longer scrolls as you move from screen to screen
-The visual voicemail app has been improved (I have personally not used this feature)
-Callback number is now supported in text / picture messages
-Android core OS updated from 2.3.5 to 2.3.6 (both versions are still Gingerbread)
-Update to how the device deals with the end of scrolling. It used to rubber-band bounce back, now it will just give a green bar and expand the bar as you scroll. (I cannot fault Samsung for this change as this was at teh core of an Apple lawsuit and has been changed in newer versions of Android.)
-(I am sure there are more. please list any others you may have noticed)
I have found some problems, and others have confirmed that this is (at least) somewhat widespread:
-The biggest problem is with wifi connectivity. Upon an initial connection to wifi, everything works great. After somewhere between 15minutes and 2 hours, problems start happening. Its as if the wifi keeps hanging or reconnecting. Download speeds (tested with the SpeedTest.com app) slow to about one third of normal. Apps like Facebook that require a constant connection will just time out.
-It appears the signal strength for 3g and 4g connections is lower. There are places where I used to get a 4g connection, and now I only get 3g. Some palces I fall back to just 2g digital.
Another minor issue i found was with text messages. When you reply to a message, it no longer automatically focuses the text in the input box. You have to first click into the box to start typing. Not a huge deal, but one more step to take over and over. Minor annoyence.
At my house, I struggle to get a 3g or 4g signal. I depend on wifi for my data connection. So with the wifi connection problem introduced by teh FF1 update, my phone is somewhat useless to me now while at home. Here are teh troubleshooting steps I have been through so far to attempt to fix the wifi problem:
-Complete factory reset on my phone. (did not help)
-Pull battery and SIM card out of phone for 15 minutes. (did not help)
-Went to a Verizon store. The guy at the store was helpful, and said he also had a Stratosphere and was getting the same wifi problems after the update. He said all he could do was to send me out a replacement phone. I got the replacement phone, and it had the same problems.
-I read in multiple palces that Android 2.3.6 has a bug within wifi and DHCP. Apparently if you have a DHCP lease set to "forever", the phone will keep requesting a new address. Setting the DHCP server on the router to something like 2 weeks, or using a static IP is supposed to solve this. I have a NetGear N900 router, and I can not change teh DHCP lease time. It appears, however, that my router is not sending out "forever" leases. But just to make sure, I gave my phone a static IP. (None of these steps made any difference).
The only thing that temporarily fixes the problem is a reboot of the phone. This will again give you anywhere from 15min to 2 hours of good wifi use before problems start happening.
I have now had this update for over a week, and on 2 phones. I still can't maintain a wifi connection for much longer than 15 minutes without problems starting up.
I am asking Verizon or Samsung to at least confirm this issue if possible. Maybe there are newer revs of the Stratopshere hardware that don't have this problem. Or there is something unique about my (and apparently others) situation. But it seems like Verizon's current stance is to offer a repalcement phone (as currently all Stratospheres are within their 1 year manufacture warranty as the phone has not been ouy for quite 1 year yet).
I am asking for a workaround for this problem, or a true fix adressed by a new software update, or at least allow us to roll back to the original Andorid 2.3.5 software.
I have had my original Stratosphere for almost a year with no wifi problems - then get the FF1 update and have had nothing but problems on 2 different phones.
Thank you for your time.

Thanks for starting a comprehensive thread on problems with this update. I want to add one more.
I have Bluetooth in my car (a 2004 model), and previously the phone has connected to it practically instantly when I start the car. Since the update, I have never been able to connect the phone to the car by Bluetooth. Several times the phone has made a standard notification sound at the moment it should be connecting to Bluetooth, though no notification appears. I have no idea what that could mean.The car's Bluetooth shows up as paired in the list of devices in Settings > Wireless & networks > Bluetooth settings. I haven't seen this widely reported as an update issue, but perhaps some others have experienced it too.
UPDATE: I finally did some testing, and found that the notification was to signal the extremely brief appearance of a dialog indicating that the car's Bluetooth was requesting a connection. Accepting that request let the phone connect with the car, and calls went to the car's sound system as they should. When I turned the car off and back on (just the electrical system; not wasting any gas on this!), the connection was established immediately, so apparently the acceptance only had to be done once. Nevertheless, it did have to be done, and the dialog notification disappears within seconds. I believe it would have been possible to go into Bluetooth settings and accept the connection request there if I missed the notification; but not seeing the notification, I might not know to do this.
One further observation: When I turned the phone's Bluetooth off and back on after a connection had been established, leaving the car on the whole time, the two did not reconnect. I believe that may be different from before the update, but I'm not really sure.
Message was updated by David Rensberger

A lot of problems after installing Windows XP using Boot Camp on a Mac Book

I have been having a lot of problems after installing Windows XP Home Edition (2002).
For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: +"This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?"+ When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
How do I fix this problem?
Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
D: There are way too many problems, and I have a feeling there will be a lot more later on. Help....
~Twilight

---I'm moving this topic to the Boot Camp forums.
-Twilight

Iphone 4 network problems after 5.1.1 -

I'm wondering if others are having problems after updating to IOS 5.1.1. My Iphone 4 is constantly jumping from having 5 bars to 1, then saying it has no service for hours. I have gotten numerous messages saying MMS requires your phone number, after trying to enter my phone number it wouldn't save. A message saying that no calls can be made and the phone needs to be restored popped up, I restored the phone and the same problems still occur.

Restore it as a new device. Do NOT restore your backup. It's possible something there is corrupt and keeps coming back when you restore.
Set it up as new and test it out. See how it bahaves. If it's OK, re-install your apps (again, do not restore the backup, just re-install them) and sync your media over.
If it's not better after restoring it as a new phone, make an appointment at the genius bar.

Computer problems after upgrading to Mavericks

SO many problems. I cleared out a ton of old stuff that I saw might be causing problems, and I've verified and repaired the disc, and uninstalled and reinstalled a couple of programs that I was seeing problems with in the console, but now I'm just flummoxed. It's behaving better than it was earlier, and isn't giving me the beach ball nearly so often, but it still seems like it's taking too long for a lot of things. I just reinstalled Avast and am currently letting a game update through Steam. I have the console and the activity monitor open to one side. Since I opened the console, it's been spitting out one or two messages every second, and all I can find through some internet searching is that it's something to do with the wireless connection. There's some other stuff periodically mixed in that doesn't sound good either, involving either sandboxd or mdworker. But for the most part it's along these lines:
Nov 5 00:59:52 kate-lenthalls-macbook-pro kernel[0]: 1516.810543: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 22 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:53 kate-lenthalls-macbook-pro kernel[0]: 1517.811065: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 22 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:54 kate-lenthalls-macbook-pro kernel[0]: 1518.811534: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 22 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:55 kate-lenthalls-macbook-pro kernel[0]: 1519.811686: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 22 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:56 kate-lenthalls-macbook-pro kernel[0]: 1520.812774: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 23 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:58 kate-lenthalls-macbook-pro kernel[0]: com.avast.AvastFileShield Warning: Unable to retrieve file path. Skipping. [22]
Nov 5 01:00:27 --- last message repeated 208 times ---
Here's my report from EtreCheck:
Hardware Information:
          MacBook Pro (17-inch 2.4GHZ)
          MacBook Pro - model: MacBookPro3,1
          1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          GeForce 8600M GT     - VRAM: 256 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0
          AirPlay: Version: 1.9
          AppleAVBAudio: Version: 2.0.0
          iSightAudio: Version: 7.7.3
System Software:
          OS X 10.9 (13A603) - Uptime: 0 days 0:30:19
Disk Information:
          ST9500420AS disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 413.49 GB (122.62 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
                    BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 85.76 GB (28.21 GB free)
USB Information:
          Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Built-in iSight
          Apple Computer Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.eltima.ElmediaPlayer.kext          (1.58)
          com.bresink.driver.BRESINKx86Monitoring          (8.0)
          com.avast.PacketForwarder          (1.3)
          com.avast.AvastFileShield          (2.0.0)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.eltima.ElmediaPlayer.daemon.plist
          [failed] com.google.GoogleML.plist
          [loaded] net.sourceforge.MonolingualHelper.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.adobe.CS5ServiceManager.plist
          [loaded] com.wacom.pentablet.plist
User Launch Agents:
          [not loaded] com.avast.home.userinit.plist
          [loaded] com.google.keystone.agent.plist
          [loaded] com.markdouma.SourceFinaglerAgent.Portal.plist
          [loaded] com.valvesoftware.steamclean.plist
          [not loaded] org.virtualbox.vboxwebsrv.plist
User Login Items:
          Flux
          smcFanControl
          GrowlHelperApp
          Google Notifier
          FreeMemory
          TrashMeHelper
          Cloud
          sidenote
          Temperature Monitor
          avast!
          Dropbox
          Alfred 2
          Activity Monitor
3rd Party Preference Panes:
          avast! Preferences
          PenTablet
          Flash Player
          GeekTool
          Growl
          MultiBrowser
          Shades Preferences
Internet Plug-ins:
          Default Browser.plugin
          DirectorShockwave.plugin
          DivX Web Player.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          JavaAppletPlugin.plugin
          QuickTime Plugin.plugin
          Silverlight.plugin
          Unity Web Player.plugin
          WacomNetscape.plugin
          WacomTabletPlugin.plugin
User Internet Plug-ins:
          Picasa.plugin
Bad Fonts:
          None
Time Machine:
          Skip System Files: YES
          Auto backup: NO
          Time Machine not configured!
Top Processes by CPU:
              24%          Console
              10%          WindowServer
               9%          LotroLauncher
               2%          steam
               1%          EtreCheck
               1%          mds_stores
               1%          mds
               1%          com.avast.proxy
               1%          Activity Monitor
               0%          empdaemon
Top Processes by Memory:
          180 MB             steam
          156 MB             Safari
          152 MB             LotroLauncher
          150 MB             mdworker
          147 MB             mds_stores
          139 MB             com.apple.IconServicesAgent
          70 MB              Dropbox
          70 MB              Console
          66 MB              com.apple.WebKit.WebContent
          61 MB              Finder
Virtual Memory Statistics:
          207 MB             Free RAM
          1.81 GB            Active RAM
          1.46 GB            Inactive RAM
          513 MB             Wired RAM
          2.39 GB            Page-ins
          3 MB               Page-outs

I just reinstalled Avast
"Avast" is perhaps the worst of the whole wretched lot of commercial "security" products for the Mac. It's worse than the imaginary "viruses" you were worried about when you installed it. Not only does it fail to protect you, it throws false warnings, destabilizes and slows down your computer, and sometimes or always corrupts the network settings and the permissions of files in your home folder. Removing it may not repair all the damage, and neither will Disk Utility or even reinstalling OS X.
Back up all data, then remove "Avast" according to the developer's instructions. Reboot.
If you tried to remove Avast by dragging an application to the Trash, you'll have to reinstall it and follow the instructions linked above.
If you still have problems after following those instructions, post again.

How can I put a message in a page after an action in another page?

Hi everybody, I know that what I try to explain is a bit difficult to understand without know all the context but I try to do it the same:). I have a datatable that contains a list of student. In another page I insert a new student. When I click on "save" button I save the new student and I return to the page with the datatable. The problem is: when I add a student I must notify the user that the student is added correctly with a message in the 1st page like "The student is added correctly". This message must display only after I added the student not when I see for the first time the page with the datatable. How can i do this? Thanks to all.

I use your suggestion but it doesn't work. I create a bean named MessageHandler with scope request. In its constructor i put an empty value for the variable addStudent_message, and in the page that the message should be I have this line of code:
<h:outputText rendered="#{!empty messageHandler.addStudent_message}" value="#{messageHandler.addStudent_message}"/>
In the bean I used to add a student I have a MessageHandler object and in the method that add a student, before the return statement, I put this:
handler.setAddStudent_message("Studente aggiunto correttamente");
When I run, it gives me this error:
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Error calling action method of component with id _idJsp1:save
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:152)
root cause
javax.faces.FacesException: Error calling action method of component with id _idJsp1:save
     org.apache.myfaces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:74)
     javax.faces.component.UICommand.broadcast(UICommand.java:106)
     javax.faces.component.UIViewRoot._broadcastForPhase(UIViewRoot.java:94)
     javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:168)
     org.apache.myfaces.lifecycle.LifecycleImpl.invokeApplication(LifecycleImpl.java:343)
     org.apache.myfaces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:86)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:137)
root cause
javax.faces.el.EvaluationException: Exception while invoking expression #{addStudentBean.save}
     org.apache.myfaces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:153)
     org.apache.myfaces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:63)
     javax.faces.component.UICommand.broadcast(UICommand.java:106)
     javax.faces.component.UIViewRoot._broadcastForPhase(UIViewRoot.java:94)
     javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:168)
     org.apache.myfaces.lifecycle.LifecycleImpl.invokeApplication(LifecycleImpl.java:343)
     org.apache.myfaces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:86)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:137)
root cause
java.lang.NullPointerException
     beanDomain.AddStudentBean.save(AddStudentBean.java:68)
     sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     org.apache.myfaces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:129)
     org.apache.myfaces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:63)
     javax.faces.component.UICommand.broadcast(UICommand.java:106)
     javax.faces.component.UIViewRoot._broadcastForPhase(UIViewRoot.java:94)
     javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:168)
     org.apache.myfaces.lifecycle.LifecycleImpl.invokeApplication(LifecycleImpl.java:343)
     org.apache.myfaces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:86)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:137)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.23 logs.
It seems that it doesn't find the MessageHandler object. What do you think?

Itunes will no longer work on my Windows 8 PC. When I attempt to start the program a message says: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.

Itunes will no longer work on my Windows 8 PC. When I attempt to start the program a message says: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. I have tried to uninstall iTunes but the Windows uninstaller will not delete the program I get a message that says: A network error occurred while attempting to read file: C:\Windows|Installer|iTunes.msi. How do I get iTunes to work again?

Whentrying to uninstall iTunes (the first program that must be uninstalled per the instructions) I get a message: A network error occurred while attempting to read file: C:\Windows|Installer|iTunes.msi. I can't even uninstall iTunes?
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Strange Mail problems after Mac OS X 10.4.6 Update

All of a sudden, Mail has started behaving strangely on me and I believe this could be caused by the Mac OS X 10.4.6 Update that hasn't been released yet. Whenever I create a new message and click "Send", instead of sending the message, Mail turns it upside down and starts filling my desktop with copies of any attachments included in the message.
Another problem is that all incoming messages seem to disappear just after being received. After several hours looking for them everywhere, I've finally been able to find some of them under my keyboard, but I don't know how to put them back in the Inbox, nor do I know where the rest could be located.
I've found a rule in Preferences set up to move all incoming mail that arrives before it was sent into a custom mailbox folder named "Time Traveling", but the missing messages aren't there either. Also, I don't remember ever having created that mailbox folder nor the associated rule. Could it have been created by a virus in a message I haven't received yet?
Thanks in advance for any help.

Ken, sorry to hear what happened to you.
My post was just an April 1st joke. When I posted it, I had no idea when Mac OS X 10.4.6 would be released. If you look at it, you'll see that nothing in my post makes any sense (it requires a little sense of humor which, given your situation, you might not have at this moment).
Now, Mac OS X 10.4.6 has become a reality. Posting in this thread about real problems could cause confusion and reduce the likelihood of getting help, so I suggest you start a new thread instead. Maybe a forums Host should lock the thread?

Photoshop CS2 problems after updating to 10.4.5.?

Anybody notice Photoshop CS problems after updating to 10.4.5.?

Hello I had the same problem
I found the following information that helped me.....
Program errors occur when software conflicts arise due to an updated operating system. You can resolve these errors when you also update the driver software that causes the conflict or when you update the operating system. Program errors can also occur because of a damaged Photoshop preference file, or if there is a problem with a phone or internet connection. The Apple Disk Utility fixes file system errors that can also cause program errors.
Error "Could not complete your request..." or "Could not create a new document..." (Photoshop CS2 on Mac OS X v10.4)
Issue
Adobe Photoshop CS2 returns one of the following error messages:
"Could not complete your request because of a program error" when you try to open a file.
"Could not create a new document because of a program error" when you try to create a new file.
Solution 1:
Install the most recent update to Mac OS.
Solution 2:
Re-create your preferences files.
1. Hold CommandOptionShift when you start Photoshop.
2. Click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Solution 3:
Disconnect your Internet connection.
To disconnect your Internet connection, do one of the following:
If you are connected to the Internet via a telephone modem, then disconnect from the modem.
If you are connected to the Internet via cable modem or DSL, then disconnect the ethernet cable from your computer.
Solution 4:
Use a disk repair utility.
Restart your Mac in Single User mode and run fsck -fy . For more information about the fsck command, please visit the Apple website at http:/docs.info.apple.comarticle.html?artnum=106214 .
Solution 5:
Ensure that all your drivers are compatible with Mac OS X v10.4.
Determine if your printer and video card (and any other peripherals you might have) are compatible with Mac OS X v10.4, and visit the manufacturers' websites to update the drivers.
Solution 6:
Re-create your printers in Mac OS X.
To re-create your printers, first delete them and then add them again.
To delete your printers:
1. Open System Preferences from the Apple menu.
2. Select Print & Fax, and click Printing.
3. Select each printer in the list and click the delete key (the minus key).
For instructions on how to add your printers again, see "Setting up to print to a printer" in Mac Help or search Help using the phrase "add a printer."
The one that fixed it for me was solution 6 -- re-creating my printers
I don't know why but it could be worth a try
Good luck
ADAM
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook + G3 iMac Mac OS X (10.4.5)

Message delivery noticification problem after 60.0...

Similar Messages

Maybe you are looking for