Message Delivery Restrictions failed in Exchange 2010

Hi everyone
For a customer, I wanted to restrict the use of a distribution group so that only a few selected people can send to the list. When I tried adding these users under Mail Flow Settings -> Message Delivery Restrictions, it gave me the following error:
Microsoft Exchange Error
The following error(s) occurred while saving changes:
Set-DistributionGroup
Failed
Error:
Couldn't find object "<domain>/Users/Administrator". Please make sure that it was spelled correctly or specify a different object. Reason: The recipient <domain>/Users/Administrator isn't the expected type.
OK
I know of the problem when a user is disabled, but never have seen this one before. The administrator account is active and in use (I logged in with the administrator account to add the users).
Anyone who knows what to do?
Thanks!

That's what the error is saying - the administrator account has no mailbox, and I suspect that the EMC expects the account you are placing in that area to have one.
It's not the administrator that I want to add to the list, but the users of the board. But I'll try to create a mailbox for the administrator, for the sake of science :)
Unfortunately not, that's what I thought at first too, but I double checked and no mailbox for the administrator can be found.
Was the administrator account mail-enabled in the past however? I wonder if it was set as delegate or had send on behalf rights for one of the users you are trying to add and its ghost entry is still there.
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.
Any way how I can check this? As for as I know, the administrator account never had "send on behalf rights", but of course I don't know what they've been doing in all the time since I left.

Similar Messages

Dynamic Distribution Groups - Message Delivery Restrict to Security Group

Hi,
I have created a dynamic distribution group and want to restrict mail delivery to only accept messages from members of a security group. How do I achieve this?
The idea is the DDG's are set with their criteria and if anyone leaves/joins the relevant SG then they will have permission to send to those DDG's.
Thanks in advance.

Hi ,
In exchange management console it is very simple to provide the access.Please follow steps.
1.Open the Exchange Management Console (EMC)
2.Locate the distribution list .
3.Right-click on it and select Properties
4.Open the Mail Flow Settings tab
4.Select Message Delivery Restrictions
5.Then select the option only senders in the following list and add the DL that you would like to provide access to send email to that group.
Thanks & Regards S.Nithyanandham

Message Delivery restrictions on users in database

Hi, I want to remove all delivery restrictions for all users in a specific database. Does someone have a script to do this please? Server is Exchange 2013 and the database name is College. Thanks

Hi,
We can use the following command to remove message delivery restrictions for all users on a specific database.
Get-Mailbox -database “College” | set-mailbox -AcceptMessagesOnlyFrom $null -AcceptMessagesOnlyFromDLMembers $null -RejectMessagesFrom $null -RejectMessagesFromDLMembers $null –RequireSenderAuthenticationEnabled
$false
Also we need to check what Willard Martin said.
Best Regards.

Configure auto reply message with original email in exchange 2010

Dear All,
I have to configure Auto reply with original message in exchange 2010.
please help me to configure..
Sunil
SUNIL PATEL SYSTEM ADMINISTRATOR

Hi SKPATEL
Thank you for your question.
By my knowledge, we cannot meet your requirement, you can followed Ed's idea.
We just use out of office to reply all email without original email when the recipient is out of office.
You can refer to the following link to configure out of office:
http://technet.microsoft.com/en-us/library/aa997463(v=exchg.80).aspx
If there are any questions, please let me know.
Best Regard,
Jim

Backup continues failing for Exchange 2010

Exchange 2010 3 node DAG
Windows 2008 R2
With a Backup software - Symantec 2010 backup exec
Daily backup of my database is failing continuously for last 2 weeks

Please check below url and let me know if you have any confusion on this.
http://social.technet.microsoft.com/Forums/exchange/en-US/8830433c-c0f3-4a0e-a3ac-c56f9a084d6d/exchange-vss-writer-is-in-failed-state?forum=exchange2010
Regards, Sourabh Kumar Jha | Please mark it as an answer if it solves your problem or vote as helpful if you like it. |

Message delivery has failed

I continue to get the following error message when sending emails:
Delivery failed for the following reason:
mail.fgispirit.org[66.132.190.37] responded with failure: 551 This mail server requires authentication before sending mail from a locally hosted domain. Please reconfigure your mail client to authenticate before sending mail.
On our other iPhone for the office the email accounts are setup the same but I am able to send. I am using the AT&T Server. Thanks!

Hey,
Try disconnecting from Wi-Fi.
If your using the AT&T outgoing mail server, then you will only be able to send emails when connected to the Internet from the AT&T data network.
If the issue persists try going to Settings> Mail, Contacts, Calendars>tap the account>verify/tap the Outgoing Mail Server. Make sure the primary server is set correctly or disabled if you only want to use the other AT&T SMTP server.
If the settings are correct and you still see the issue, you may want to reset or restore the iPhone.
http://docs.info.apple.com/article.html?artnum=305743
http://docs.info.apple.com/article.html?artnum=305744
Jason

Message Delivery Restrictions on Distribution Groups setting "Require that all senders are authenticated" on newly created groups

This is new behavior. I recently decommissioned my Exchange 2003 server. Could this have caused this new behavior? If so, how do I ensure "Require that all senders are authenticated" is unchecked during group creation?

I don't believe there is a way to change the default. You'll have to either go to the properties each time after you create the group and disable it. Or run the following powershell script after:
Set-DistributionGroup GROUPNAME -RequireSenderAuthenticationEnabled $False
Thanks, MikeV MCSE 2012

How to stop email messages "Delivery has failed"?

For more than 6 months there have been constant messages. Now 100 a day! They all end in .ru with many different names in front. Do I have to cancel my .me address to stop this? How would I do that?

Hi Chris,
in addition to "cdeatherage" (if we both are on the right track what concerns your question).
3. Look at your providers website and activate his spam protection.
4. Talk to your provider and ask him about his possibilities.
5. Insert your own eMail-address only as a jpg-file (image-file)
6. Replace the @ with a written "at"
7. and more ... you could even look to Google.
Good luck!
Hans-Guenter
P.S.
Answer should be directed to "Jim Brasil".

Microsoft Exchange Server/Exchange 2010/Mailbox/Database Copy Mounted

Good Morning everyone!!!
I Have SCOM 2007 R2 CU5 Envoirnment and i am monitoring Microsoft Exchange 2010 SP1 Messaging infrastracture,
I have Microsoft Exchange 2010 SP1 Monitoring MP, MP version is 14.2.71.0.
Case:-
When exchange is having issue with DAG, SCOM monitoring rule:- KHI: The database copy is not mounted on the local server. Another database copy may be mounted on a different server.
is generating the alert but alert Description is only " _ef4a8515_1cc0_48a9_aa12_92ba059a6eae_ " and rest of the things are blank
and because of this ticketing team is unable to process these alerts,
Impact:-
Whenever DAG is unavailable, messaging team is not getting notification and because of this. Exchange services are failing down,
Does anyone having this kind of issues on their exchange environment?
I am looking solution for this issue, please let me know if anyone is aware about this.
Regards, Ganesh M <!> Microsoft MPN - Member =========================================================== Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer
your question. This can be beneficial to other community members reading the thread.

Does anyone has updated information regarding Exchange 2010 DAG monitoring fix, <o:p></o:p>
As i see there was exchange MP release on 31st Aug 2012
ID
Name
Targets
_ef4a8515_1cc0_48a9_aa12_92ba059a6eae_
KHI: The database copy is not mounted on the local server. Another database copy may be mounted on a different server.
Root Management Server
_EF51D339_22C5_49b3_8B6B_25002BE31D4A_
KHI: Retry Mailbox Delivery Queue Length - sustained for 90 minutes - Red(>1) - Hub Transport.
Root Management Server
_93558cf0_e063_45b1_b57a_0d4b53e0d615_
KHI: The Microsoft Exchange Information Store service (MSExchangeIS) isn't running.
Root Management Server
My monitoring is affected for these rules which i mentioned below, here alerts
information is shown as rule ID instead of Rule name. and we don’t get alert description
for above rules when the generate alerts.<o:p></o:p>
Response would be appreciated <o:p></o:p>
Regards, Ganesh M <!> Microsoft MPN - Member =========================================================== Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer
your question. This can be beneficial to other community members reading the thread.

Revert Back Exchange 2013 to Exchange 2010

Dear All,
I migrated Exchange 2010 to Exchange 2013 but was facing lot of issues on Windows XP clients with Office 2007 SP3 with November update. XP clients machine were continuously prompted user name and password and some times windows 7 with Office 2007 SP3 with
November update were also behaved like this. I googled alot but couldn't find any solutions.
Lastly decided to revert back to Exchange 2010, every thing went fine but again hurdles started on IMAP/POP3 clients that are not able to send email external domain but able to receive emails from external domains.
The other issue is in Exchange 2013 made some contacts which was deleted in Exchange 2013 but those contacts are now in GAL but couldn't find where these contacts are sit in and how to remove.
Kindly someone guide on those issues and specially on XP machine prompted username and password as I have to again migrate the users from Exchange 2010 to Exchange 2013.
Thanks,

here is the reply of error message
Delivery has failed to these recipients or groups:
Abc123 (Contact in Exchange 2010)
The e-mail address you entered couldn't be found. Please check the recipient's e-mail address and try to resend the message. If the problem continues, please contact your helpdesk.
Diagnostic information for administrators:
Generating server: server.local.net
IMCEAEX-_O=FIRST+20ORGANIZATION_OU=First+20Administrative+20Group_cn=Recipients_cn=abc123.domain.com
#550 5.1.1 RESOLVER.ADR.ExRecipNotFound; not found ##
Original message headers:
Received: from server.local.net ([fe80::e07c:d3fe:2aeb]) by
server.local.net ([fe80::e07c:3ded:2aeb%11]) with mapi id 14.000;
Fri, 6 Feb 2015 17:57:09 +0500
Content-Type: application/ms-tnef; name="mail.mail.net"
Content-Transfer-Encoding: binary

Exchange 2010: Forward e-mail to one account to multiple recipients

Exchange 2010
External and internal e-mails that are sent to
[email protected] need to be forwarded to multiple internal exchange 2010 recipients.
I set up a Universal Distribution group in Exchange and added those users, but this did not work.
What is the procedure for this?
Cathy Burnham, MCSA

Okay everyone - the suggestion from
ty72182 did the trick. Here is the process to have an e-mail address forward to multiple Exchange e-mail users in Exchange 2010:
This is all done in the Exchange Management Console:
Recipient Config > Right Click Distribution Group > New Distribution Group > New > Distribution > Put in the OU of your choosing > Descriptive Name > put same Discriptive name under Alias
Once the group is set up:
Right click group, go to properties
Members tab: Add the users to whom you wish to have mail forwarded
Mail Flow Settings tab: Double-click Message Delivery Restrictions
UNcheck the box "Require that all senders are authenticated"
--> Otherwise, only INTERNAL email sent to that address will forward, but not external email will.
Then go to the mailbox of the account you want forwarded to multiple people.
Right-click the box, > Properties > Mail Flow Settings > Delivery Options and choose Forward and add this dist group.
Cathy Burnham, MCSA

Exchange 2010 DL problem.

Hi,
We have exchange 2010 server setup with office 365 in hybrid mode. We moved some users mailboxes from exchange server to office365. Now we have some DL on exchange server that have some users (mailboxes on prem.) and some users (mailboxes on office365).
When we send the mail to that DL, we received error "Your message can't be delivered because delivery to this address is restricted."
How can we resolve this issue? Please help me.
Thanks & Regards,

Hi shrigiriraj
Thank you for your question.
Did you migrate DL to Exchange 2010？In order to make sure correct setting after you migrate, you can refer to the following steps:
1. Click the Distribution Group name as you want to set
2. Click the “Properties“
3. Click the “Mail Flow Settings” Tab
4. Click the “Message Delivery Restrictions” item
5. Click the “Properties…” button
6 .Uncheck the “Require that all senders are authenticated” check-box
7. Click “OK” button
8. Click “OK” button again
If there are any questions, please let me know.
Best Regard,
Jim

Migrate Small Business Server 2003 to Exchange 2010 and Windows 2008 R2

I am trying to migrate my server SBS 2003 to win server 2008 r2 and exchange 2010.
I got error message when trying to install exchange 2010 server.
Error:
Installing product E:\exchangserver.msi failed. Fatal error during installation. Error code is 1603. Last error reported by the MSI package is 'Error reading from file E:\Setup\ServerRoles\ClientAccess\owa\bin\DocumentViewing\isgdi32.dll.
Verify that the file exists and that you can access it.'.
Fatal error during installation

Hi Mike,
Error 1603 "Fatal Error" indicates that issues with Media type or Windows installer file not correctly installed.
I recommend you check the media you are installing. Change ISO files and reinstall.
Here are some threads for your reference.
Error 1603 during a new installation
http://social.technet.microsoft.com/Forums/exchange/en-US/1de7daab-9cdd-4696-8cc4-6b4418be33ca/error-1603-during-a-new-installation?forum=exchange2010
Fatal error during installation. Error code is 1603
http://social.technet.microsoft.com/Forums/exchange/en-US/a325132a-5e3d-4496-adec-4ccdbb0d6c92/fatal-error-during-installation-error-code-is-1603?forum=exchangesvrdeploy
Hope it helps.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Exchange 2010 Mail Enabled Distribution Group Won't Receive from External Address

Let me pre-empt the usual first response: yes, I've unchecked "require that all senders are authenticated" on the Message delivery Restrictions properties of Message Delivery Restrictions. I cannot get a message from an external mail server to
send to an internal mail-enable distribution group. It's working internally. I've checked our ironport and the message is being sent to exchange (at least I think it is).
How can I troubleshoot this?!
tfgeorge

Ironport is definitely sending this email to exchange. Please read:
06 Jun 2011 08:53:20 (GMT -05:00)
Protocol SMTP interface Main Interface (IP Gateway IP) on incoming connection (ICID 17720578) from sender IP 65.54.190.154. Reverse DNS host bay0-omc3-s16.bay0.hotmail.com verified yes.
06 Jun 2011 08:53:20 (GMT -05:00)
(ICID 17720578) ACCEPT sender group UNKNOWNLIST match sbrs[-1.0:6.0] SBRS 3.0
06 Jun 2011 08:53:20 (GMT -05:00)
Start message 2136865 on incoming connection (ICID 17720578).
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 enqueued on incoming connection (ICID 17720578) from
[email protected].
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 on incoming connection (ICID 17720578) added recipient ([email protected]).
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 contains message ID header '<[email protected]>'.
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 original subject on injection: TEST
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 (1471 bytes) from
[email protected] ready.
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 matched per-recipient policy DEFAULT for inbound mail policies.
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 scanned by Anti-Spam engine: CASE. Interim verdict: Negative
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 scanned by Anti-Spam engine CASE. Interim verdict: definitely negative.
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 scanned by Anti-Spam engine: CASE. Final verdict: Negative
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 scanned by Anti-Virus engine Sophos. Interim verdict: CLEAN
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 scanned by Anti-Virus engine. Final verdict: Negative
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 queued for delivery.
06 Jun 2011 08:53:20 (GMT -05:00)
SMTP delivery connection (DCID 1658840) opened from IronPort interface 100.100.100.100 to IP address 100.100.100.100 on port 25.
06 Jun 2011 08:53:20 (GMT -05:00)
(DCID 1658840) Delivery started for message 2136865 to
[email protected].
06 Jun 2011 08:53:21 (GMT -05:00)
(DCID 1658840) Delivery details: Message 2136865 sent to
[email protected]
06 Jun 2011 08:53:21 (GMT -05:00)
Message 2136865 to
[email protected] received remote SMTP response '2.6.0 <[email protected]> [InternalId=919833] Queued mail for delivery'.
tfgeorge

Unable to clear flags in Mail using Exchange 2010

I am able to flag messages without a problem, but when I try to turn those flags off within a few moments it will sync them back to "flagged." I basically cannot unflag a flagged message. Connected to an Exchange 2010 server. Not having any problems getting or syncing mail. Activity window is clear and nothing is queued up.
I see "changing flags" pop up really quick in the Activity window but as soon as it sync's back up with Exchange those flags come right back.
Help!

I've found a solution that works for me, although it's a little technical.
I found that the Envelope Index file in Home/Library/Mail/V2/MailData/ is actually a sqlite3 database.
the steps I followed were:
Quit Mail (don't know if this is necessary)
Open Terminal, and cd to ~/Library/Mail/V2/MailData/
open the sqlite db using the sqlite3 command line client:
$> sqlite3 Envelope\ Index
Now, in the sqlite3 command shell I queried the messages table to see which messages were flagged:
sqlite> select * from messages where flagged = '1';
I verified that the one message I couldn't clear was in the result set and then I updated the database and cleared the flag:
sqlite> update messages set flagged = '0' where flagged = '1';
Re-start Mail, and voila - flagged messages gone.
Note: to selectively clear the flags from only certain messages would probably require a more advanced update statement that included some join in the where clause.

Message Delivery Restrictions failed in Exchange 2010

Similar Messages

Maybe you are looking for