Message : Document type doesnot allow you to assign to object VBAP

Hi All,
I am attaching a document that is been created through CV01N to transaction VA02 at item level.when i am trying to put that document no. at item level on the Extras-Documents- system is giving me a message as "Document type doesnot allow you to assign to object VBAP".
similarly if i take this document no from F4 screen,it comes but when i check the same after saving the document gets disappeared.
while the same document is getting attached at material master easily.
I think some customization is missing for the same..plz let me what i need to do to resolve the same.
Thanks & Regards,
Sandeep Sharma

Hi Sandeep,
The mentioned error message indicates to me that you do not have maintained the object VBAP in transaction DC10 to your relevant document type.
Please see the WIKI page https://www.sdn.sap.com/irj/sdn/wiki?path=/display/plm/ca-dms-Object+link for all necessary customizing settings to achieve a proper object link behavior.
Further please check if note 1034682 could be also relevant for you, because I do not know your current release.
After all the settings in DC10 and TDWOD are maintained the document should be linked to the VBAP objects.
Best regards,
Christoph
P.S.: Please reward points for useful information.

Similar Messages

Document type ZD does not allow you to assign to object MARA

hi ppl,
I have created a Z document type.but its not allowing me to assign in mm02.what might be the problem..? its throwing an error message Document type ZD does not allow you to assign to object MARA.

You need to enable object linking to mara on your new document type. Go to Tcode DC10, select the document type and then go to the object links area. Create a new object link for your document type.

Error message is 'TYPE' is not a component of data object 'PAYLOAD'.

Hello,
I have sceanrio where file->Synchronus bapi ->File.
For this I have defined a bpm.
Text file inut will be read and converted using sender FCC.
Bpm will call a synchronus bapi from r/3 and collect response. I need to create a success or error response file from the status of bapi response. I have used switch step to do that.
But here when I give condtion as this XPath SOResonse./p1:Z_BAPI_SALESORDER_CREATEFROM3.Response/RETURN1/TYPE = S, SXI_CACHE gives status of bpm as 99 and error message is 'TYPE' is not a component of data object 'PAYLOAD'.
At the same time if i just put a condition of simple type container variable (SuccessCounter = 0), it gives status 0 in SXI_CACHE.
Pl can anyone suggest on this as its urgent.
thanks in advance,
Sharada

Thanks for quick response.
Yes BAPI response has TYPE field.
Pl cehck this response xml
<?xml version="1.0" encoding="UTF-8" ?>
- <rfc:Z_BAPI_SALESORDER_CREATEFROM3.Response xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <RETURN1>
<TYPE>E</TYPE>
<ID>V4</ID>
<NUMBER>115</NUMBER>
<MESSAGE>Purchase order number in document number: 304928 already exists</MESSAGE>
<LOG_NO />
<LOG_MSG_NO>000000</LOG_MSG_NO>
<MESSAGE_V1>304928</MESSAGE_V1>
<MESSAGE_V2 />
<MESSAGE_V3 />
<MESSAGE_V4 />
<PARAMETER>SALES_HEADER_IN</PARAMETER>
<ROW>0</ROW>
<FIELD />
<SYSTEM>DEV200</SYSTEM>
</RETURN1>
<SALESDOCUMENT />
- <EXTENSIONIN>
- <item>
<STRUCTURE>BAPE_VBAK</STRUCTURE>
<VALUEPART1>X</VALUEPART1>
<VALUEPART2 />
<VALUEPART3 />
<VALUEPART4 />
</item>
</EXTENSIONIN>
<ORDER_CCARD />
<ORDER_CFGS_BLOB />
<ORDER_CFGS_INST />
<ORDER_CFGS_PART_OF />
<ORDER_CFGS_REF />
<ORDER_CFGS_REFINST />
<ORDER_CFGS_VALUE />
<ORDER_CFGS_VK />
<ORDER_CONDITIONS_IN />
<ORDER_CONDITIONS_INX />
<ORDER_ITEMS_IN />
<ORDER_ITEMS_INX />
- <ORDER_KEYS>
- <item>
<REFOBJTYP />
<REFOBJECT>HEADER</REFOBJECT>
<REFOBJKEY />
<REFLOGSYS />
<DOC_NUMBER />
<ITM_NUMBER>000000</ITM_NUMBER>
<SCHED_LIN>0000</SCHED_LIN>
<COND_NO />
<CONDITEMNO>000000</CONDITEMNO>
<COND_ST_NO>000</COND_ST_NO>
<COND_COUNT>00</COND_COUNT>
<COND_TYPE />
<STATUS />
<TINDEX>000000</TINDEX>
<ADDRESS />
<ABRLI>0000</ABRLI>
<ABART />
</item>
- <item>
<REFOBJTYP />
<REFOBJECT>ADDRESS</REFOBJECT>
<REFOBJKEY />
<REFLOGSYS />
<DOC_NUMBER />
<ITM_NUMBER>000000</ITM_NUMBER>
<SCHED_LIN>0000</SCHED_LIN>
<COND_NO />
<CONDITEMNO>000000</CONDITEMNO>
<COND_ST_NO>000</COND_ST_NO>
<COND_COUNT>00</COND_COUNT>
<COND_TYPE />
<STATUS />
<TINDEX>000001</TINDEX>
<ADDRESS />
<ABRLI>0000</ABRLI>
<ABART />
</item>
- <item>
<REFOBJTYP />
<REFOBJECT>ADDRESS</REFOBJECT>
<REFOBJKEY />
<REFLOGSYS />
<DOC_NUMBER />
<ITM_NUMBER>000000</ITM_NUMBER>
<SCHED_LIN>0000</SCHED_LIN>
<COND_NO />
<CONDITEMNO>000000</CONDITEMNO>
<COND_ST_NO>000</COND_ST_NO>
<COND_COUNT>00</COND_COUNT>
<COND_TYPE />
<STATUS />
<TINDEX>000002</TINDEX>
<ADDRESS />
<ABRLI>0000</ABRLI>
<ABART />
</item>
- <item>
<REFOBJTYP />
<REFOBJECT>ADDRESS</REFOBJECT>
<REFOBJKEY />
<REFLOGSYS />
<DOC_NUMBER />
<ITM_NUMBER>000000</ITM_NUMBER>
<SCHED_LIN>0000</SCHED_LIN>
<COND_NO />
<CONDITEMNO>000000</CONDITEMNO>
<COND_ST_NO>000</COND_ST_NO>
<COND_COUNT>00</COND_COUNT>
<COND_TYPE />
<STATUS />
<TINDEX>000003</TINDEX>
<ADDRESS />
<ABRLI>0000</ABRLI>
<ABART />
</item>
- <item>
<REFOBJTYP />
<REFOBJECT>ADDRESS</REFOBJECT>
<REFOBJKEY />
<REFLOGSYS />
<DOC_NUMBER />
<ITM_NUMBER>000000</ITM_NUMBER>
<SCHED_LIN>0000</SCHED_LIN>
<COND_NO />
<CONDITEMNO>000000</CONDITEMNO>
<COND_ST_NO>000</COND_ST_NO>
<COND_COUNT>00</COND_COUNT>
<COND_TYPE />
<STATUS />
<TINDEX>000004</TINDEX>
<ADDRESS />
<ABRLI>0000</ABRLI>
<ABART />
</item>
</ORDER_KEYS>
- <ORDER_PARTNERS>
- <item>
<PARTN_ROLE>RE</PARTN_ROLE>
<PARTN_NUMB>LS-RETAIL</PARTN_NUMB>
<ITM_NUMBER>000000</ITM_NUMBER>
<TITLE />
<NAME />
<NAME_2 />
<NAME_3 />
<NAME_4 />
<STREET />
<COUNTRY />
<COUNTR_ISO />
<POSTL_CODE />
<POBX_PCD />
<POBX_CTY />
<CITY />
<DISTRICT />
<REGION />
<PO_BOX />
<TELEPHONE />
<TELEPHONE2 />
<TELEBOX />
<FAX_NUMBER />
<TELETEX_NO />
<TELEX_NO />
<LANGU />
<LANGU_ISO />
<UNLOAD_PT />
<TRANSPZONE />
<TAXJURCODE />
<ADDRESS />
<PRIV_ADDR />
<ADDR_TYPE />
<ADDR_ORIG />
<ADDR_LINK>0001</ADDR_LINK>
<REFOBJTYPE />
<REFOBJKEY />
<REFLOGSYS />
</item>
- <item>
<PARTN_ROLE>WE</PARTN_ROLE>
<PARTN_NUMB>LS-RETAIL</PARTN_NUMB>
<ITM_NUMBER>000000</ITM_NUMBER>
<TITLE />
<NAME />
<NAME_2 />
<NAME_3 />
<NAME_4 />
<STREET />
<COUNTRY />
<COUNTR_ISO />
<POSTL_CODE />
<POBX_PCD />
<POBX_CTY />
<CITY />
<DISTRICT />
<REGION />
<PO_BOX />
<TELEPHONE />
<TELEPHONE2 />
<TELEBOX />
<FAX_NUMBER />
<TELETEX_NO />
<TELEX_NO />
<LANGU />
<LANGU_ISO />
<UNLOAD_PT />
<TRANSPZONE />
<TAXJURCODE />
<ADDRESS />
<PRIV_ADDR />
<ADDR_TYPE />
<ADDR_ORIG />
<ADDR_LINK>0002</ADDR_LINK>
<REFOBJTYPE />
<REFOBJKEY />
<REFLOGSYS />
</item>
- <item>
<PARTN_ROLE>Z1</PARTN_ROLE>
<PARTN_NUMB>LS-RETAIL</PARTN_NUMB>
<ITM_NUMBER>000000</ITM_NUMBER>
<TITLE />
<NAME />
<NAME_2 />
<NAME_3 />
<NAME_4 />
<STREET />
<COUNTRY />
<COUNTR_ISO />
<POSTL_CODE />
<POBX_PCD />
<POBX_CTY />
<CITY />
<DISTRICT />
<REGION />
<PO_BOX />
<TELEPHONE />
<TELEPHONE2 />
<TELEBOX />
<FAX_NUMBER />
<TELETEX_NO />
<TELEX_NO />
<LANGU />
<LANGU_ISO />
<UNLOAD_PT />
<TRANSPZONE />
<TAXJURCODE />
<ADDRESS />
<PRIV_ADDR />
<ADDR_TYPE />
<ADDR_ORIG />
<ADDR_LINK>0003</ADDR_LINK>
<REFOBJTYPE />
<REFOBJKEY />
<REFLOGSYS />
</item>
- <item>
<PARTN_ROLE>AG</PARTN_ROLE>
<PARTN_NUMB>LS-RETAIL</PARTN_NUMB>
<ITM_NUMBER>000000</ITM_NUMBER>
<TITLE />
<NAME />
<NAME_2 />
<NAME_3 />
<NAME_4 />
<STREET />
<COUNTRY />
<COUNTR_ISO />
<POSTL_CODE />
<POBX_PCD />
<POBX_CTY />
<CITY />
<DISTRICT />
<REGION />
<PO_BOX />
<TELEPHONE />
<TELEPHONE2 />
<TELEBOX />
<FAX_NUMBER />
<TELETEX_NO />
<TELEX_NO />
<LANGU />
<LANGU_ISO />
<UNLOAD_PT />
<TRANSPZONE />
<TAXJURCODE />
<ADDRESS />
<PRIV_ADDR />
<ADDR_TYPE />
<ADDR_ORIG />
<ADDR_LINK />
<REFOBJTYPE />
<REFOBJKEY />
<REFLOGSYS />
</item>
</ORDER_PARTNERS>
<ORDER_SCHEDULES_IN />
<ORDER_SCHEDULES_INX />
- <ORDER_TEXT>
- <item>
<DOC_NUMBER />
<ITM_NUMBER>000020</ITM_NUMBER>
<TEXT_ID>Z001</TEXT_ID>
<LANGU>E</LANGU>
<LANGU_ISO />
<FORMAT_COL />
<TEXT_LINE />
<FUNCTION />
</item>
- <item>
<DOC_NUMBER />
<ITM_NUMBER>000030</ITM_NUMBER>
<TEXT_ID>Z001</TEXT_ID>
<LANGU>E</LANGU>
<LANGU_ISO />
<FORMAT_COL />
<TEXT_LINE />
<FUNCTION />
</item>
- <item>
<DOC_NUMBER />
<ITM_NUMBER>000040</ITM_NUMBER>
<TEXT_ID>Z001</TEXT_ID>
<LANGU>E</LANGU>
<LANGU_ISO />
<FORMAT_COL />
<TEXT_LINE />
<FUNCTION />
</item>
- <item>
<DOC_NUMBER />
<ITM_NUMBER>000050</ITM_NUMBER>
<TEXT_ID>Z001</TEXT_ID>
<LANGU>E</LANGU>
<LANGU_ISO />
<FORMAT_COL />
<TEXT_LINE />
<FUNCTION />
</item>
- <item>
<DOC_NUMBER />
<ITM_NUMBER>000020</ITM_NUMBER>
<TEXT_ID>Z001</TEXT_ID>
<LANGU>E</LANGU>
<LANGU_ISO />
<FORMAT_COL />
<TEXT_LINE />
<FUNCTION />
</item>
- <item>
<DOC_NUMBER />
<ITM_NUMBER>000030</ITM_NUMBER>
<TEXT_ID>Z001</TEXT_ID>
<LANGU>E</LANGU>
<LANGU_ISO />
<FORMAT_COL />
<TEXT_LINE />
<FUNCTION />
</item>
- <item>
<DOC_NUMBER />
<ITM_NUMBER>000040</ITM_NUMBER>
<TEXT_ID>Z001</TEXT_ID>
<LANGU>E</LANGU>
<LANGU_ISO />
<FORMAT_COL />
<TEXT_LINE />
<FUNCTION />
</item>
- <item>
<DOC_NUMBER />
<ITM_NUMBER>000050</ITM_NUMBER>
<TEXT_ID>Z001</TEXT_ID>
<LANGU>E</LANGU>
<LANGU_ISO />
<FORMAT_COL />
<TEXT_LINE />
<FUNCTION />
</item>
</ORDER_TEXT>
- <PARTNERADDRESSES>
- <item>
<ADDR_NO>0001</ADDR_NO>
<FORMOFADDR />
<NAME />
<NAME_2 />
<NAME_3 />
<NAME_4 />
<C_O_NAME />
<CITY />
<DISTRICT />
<CITY_NO />
<POSTL_COD1 />
<POSTL_COD2 />
<POSTL_COD3 />
<PO_BOX />
<PO_BOX_CIT />
<DELIV_DIS />
<STREET />
<STREET_NO />
<STR_ABBR />
<HOUSE_NO />
<STR_SUPPL1 />
<STR_SUPPL2 />
<LOCATION />
<BUILDING />
<FLOOR />
<ROOM_NO />
<COUNTRY />
<LANGU />
<REGION />
<SORT1 />
<SORT2 />
<TIME_ZONE />
<TAXJURCODE />
<ADR_NOTES />
<COMM_TYPE />
<TEL1_NUMBR />
<TEL1_EXT />
<FAX_NUMBER />
<FAX_EXTENS />
<STREET_LNG />
<DISTRCT_NO />
<CHCKSTATUS />
<PBOXCIT_NO />
<TRANSPZONE />
<HOUSE_NO2 />
<E_MAIL />
<STR_SUPPL3 />
<TITLE />
<COUNTRYISO />
<LANGU_ISO />
<BUILD_LONG />
<REGIOGROUP />
<HOME_CITY />
<HOMECITYNO />
<PCODE1_EXT />
<PCODE2_EXT />
<PCODE3_EXT />
<PO_W_O_NO />
<PO_BOX_REG />
<POBOX_CTRY />
<PO_CTRYISO />
<HOMEPAGE />
<DONT_USE_S />
<DONT_USE_P />
<HOUSE_NO3 />
<LANGU_CR />
<LANGUCRISO />
</item>
- <item>
<ADDR_NO>0002</ADDR_NO>
<FORMOFADDR />
<NAME>SUPERIOR SELECTED STONE</NAME>
<NAME_2 />
<NAME_3>33-53 10TH STREET</NAME_3>
<NAME_4 />
<C_O_NAME />
<CITY />
<DISTRICT />
<CITY_NO />
<POSTL_COD1 />
<POSTL_COD2 />
<POSTL_COD3 />
<PO_BOX />
<PO_BOX_CIT />
<DELIV_DIS />
<STREET />
<STREET_NO />
<STR_ABBR />
<HOUSE_NO />
<STR_SUPPL1 />
<STR_SUPPL2 />
<LOCATION />
<BUILDING />
<FLOOR />
<ROOM_NO />
<COUNTRY />
<LANGU />
<REGION />
<SORT1 />
<SORT2 />
<TIME_ZONE />
<TAXJURCODE />
<ADR_NOTES />
<COMM_TYPE />
<TEL1_NUMBR />
<TEL1_EXT />
<FAX_NUMBER />
<FAX_EXTENS />
<STREET_LNG />
<DISTRCT_NO />
<CHCKSTATUS />
<PBOXCIT_NO />
<TRANSPZONE />
<HOUSE_NO2 />
<E_MAIL />
<STR_SUPPL3 />
<TITLE />
<COUNTRYISO />
<LANGU_ISO />
<BUILD_LONG />
<REGIOGROUP />
<HOME_CITY />
<HOMECITYNO />
<PCODE1_EXT />
<PCODE2_EXT />
<PCODE3_EXT />
<PO_W_O_NO />
<PO_BOX_REG />
<POBOX_CTRY />
<PO_CTRYISO />
<HOMEPAGE />
<DONT_USE_S />
<DONT_USE_P />
<HOUSE_NO3 />
<LANGU_CR />
<LANGUCRISO />
</item>
- <item>
<ADDR_NO>0003</ADDR_NO>
<FORMOFADDR />
<NAME>Langenscheidt Publishers Inc.</NAME>
<NAME_2 />
<NAME_3 />
<NAME_4 />
<C_O_NAME />
<CITY />
<DISTRICT />
<CITY_NO />
<POSTL_COD1 />
<POSTL_COD2 />
<POSTL_COD3 />
<PO_BOX />
<PO_BOX_CIT />
<DELIV_DIS />
<STREET />
<STREET_NO />
<STR_ABBR />
<HOUSE_NO />
<STR_SUPPL1 />
<STR_SUPPL2 />
<LOCATION />
<BUILDING />
<FLOOR />
<ROOM_NO />
<COUNTRY />
<LANGU />
<REGION />
<SORT1 />
<SORT2 />
<TIME_ZONE />
<TAXJURCODE />
<ADR_NOTES />
<COMM_TYPE />
<TEL1_NUMBR />
<TEL1_EXT />
<FAX_NUMBER />
<FAX_EXTENS />
<STREET_LNG />
<DISTRCT_NO />
<CHCKSTATUS />
<PBOXCIT_NO />
<TRANSPZONE />
<HOUSE_NO2 />
<E_MAIL />
<STR_SUPPL3 />
<TITLE />
<COUNTRYISO />
<LANGU_ISO />
<BUILD_LONG />
<REGIOGROUP />
<HOME_CITY />
<HOMECITYNO />
<PCODE1_EXT />
<PCODE2_EXT />
<PCODE3_EXT />
<PO_W_O_NO />
<PO_BOX_REG />
<POBOX_CTRY />
<PO_CTRYISO />
<HOMEPAGE />
<DONT_USE_S />
<DONT_USE_P />
<HOUSE_NO3 />
<LANGU_CR />
<LANGUCRISO />
</item>
</PARTNERADDRESSES>
- <RETURN>
- <item>
<TYPE>E</TYPE>
<ID>V4</ID>
<NUMBER>115</NUMBER>
<MESSAGE>Purchase order number in document number: 304928 already exists</MESSAGE>
<LOG_NO />
<LOG_MSG_NO>000000</LOG_MSG_NO>
<MESSAGE_V1>304928</MESSAGE_V1>
<MESSAGE_V2 />
<MESSAGE_V3 />
<MESSAGE_V4 />
<PARAMETER>SALES_HEADER_IN</PARAMETER>
<ROW>0</ROW>
<FIELD />
<SYSTEM>DEV200</SYSTEM>
</item>
- <item>
<TYPE>E</TYPE>
<ID>V4</ID>
<NUMBER>219</NUMBER>
<MESSAGE>Sales document was not changed</MESSAGE>
<LOG_NO />
<LOG_MSG_NO>000000</LOG_MSG_NO>
<MESSAGE_V1 />
<MESSAGE_V2 />
<MESSAGE_V3 />
<MESSAGE_V4 />
<PARAMETER />
<ROW>0</ROW>
<FIELD />
<SYSTEM>DEV200</SYSTEM>
</item>
</RETURN>
</rfc:Z_BAPI_SALESORDER_CREATEFROM3.Response>

Reg: Document type should allow only one Material Type or a number series

Dear Experts,
In my project , clients requirement is to restrict the Material Type or the number range assigned to a Matreial Type for a perticular PO Document Type. We have one document type for Local Work Order -YLWO in which we want to enter the DIEN material type material code only. since we want to use the Po document type to procure service from local vendor and same time we dont want to use the SERVICE Entry Sheet for the external service. Please guide me...
My opinion is -- We can try with USEREXIT or BADI.
If I am right then can any body suggest me Badi or USEREXIT name....
We are using 4.6C so I am facing some problem .
Thanks in advance.
Regards
Dibya

Check the following BADI with your ABAP Consultant
ME_PROCESS_PO_CUST
I have used this BADI for controlling the type of vendors according to PO document type. Currently I do not have access key to check the fields in this user exit. Check with your ABAPER on this whether it can fulfill your requirement.
The use of item category D results into the service entry sheet. If you want to use DIEN material type then you have to do GR.
what is the difference from your requirement ???
Service entry sheet is nothing but the GR only.
DEIN material type is used basically from SD or Customer service module.
please make clear to forum what is your some problem by using 4.6C. It is too generic a statement.

SAP Best Practice for Document Type./Item category/Acc assignment cat.

What is the Best Practice for the document Type & Item category
I want to use NB - Item category - B & K ( Blanket PO) , D ( Service) and T( Text) .
Is sap recommends to use FO Only for the Blanket Purchase Order.
We want to use service contract (with / without service entry sheet) for all our services.
We want to buy asset for our office equipments .
Which is the best one to use NB or FO ?
Please give me any OSS notes or reference for this
Thanks
Nick

Thank you very much for your response.
I hope I can provide some clarity on how the accounting needs to be handle per FERC Regulations. The G/L balance on the utility that is selling the assets will be in the following accounts (standard accounts across all FERC Regulated Utilities):
101 - Acquisition Value for the assets
108 - Accumulated Depreciation Value for the assets
For an example, there is Debit $60,000,000 in FERC Account 101 and a credit $30,000,000 in FERC Account 108. When the purchase occurs, the net book value for the asset will be on our G/L in FERC Account 102. Once we have FERC Approval to acquire the plant assets, we will need to enter the Acquisition Value and associated Accumulated Depreciation onto our G/L to FERC Account 101 and FERC Account 108 respectively with an offset to FERC Account 102.
The method that I came up with is to purchase the NBV of the assets to a clearing account. I then set up account assignments that will track the Acquisition Value and respective Accumulated Depreciation for each asset that is being purchased. I load the respective asset values using t-code AS91 and then make an entry to the 2 respective accounts with the offset against the clearing account using t-code OASV. Once my company receives FERC approval, I will transfer the asset to new assets that has the account assignments for FERC Account 101 and FERC Account 108 using t-code ABUMN or FB01.

Can I use Adobe CS4 with Mavericks? I get message: Document Types Not Found

Not able to open CS4 after moving from 2006 MacBook to newer MacBookPro with Mavericks already installed.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Document type FO to have same layout as NB

Hi all,
I need to activate framework orders and I need to ensure that document type FO has the same layout as NB. Please would you tell me how/where to do this?
Also- do framework orders have a different number range compared to standard PO's?
Thanks in advance.
JJ

Dear,
Why you need screen layout for Frame work order document type same as standard PO?
The documnet type is created and is assigned to a screen layout as per the requirement e.g material group is madatory for document type FO and optional entry for document Type NB.If you will assign NBF screenlayout (standard) to FO order type it will behave as standard .
Document type controls scrren lay out,no range,allowed item categories and freference requisitions.you can assign same no range to more than one document type,But it is advisable to maintain different no-range for each document type.

Document type in REM

Hi All
After posting from RERAPP system has posted doc with account type AB.
Please let me know from where it has picked AB doc type.
Regards
shantanu

Hi Shantanu,
Doc type AB is a ( default) value type to link the REPP. In your system also its taking like that by default.
Any how you have flexible options to change / Craete the new document type according to your internal requirements.
You can create your own document types at the below path as you wish :
Menu Path :- IMG –> Financial A/C –> Global Settings –> Documents –> Document Header –> Define Document types
and then you can assign the same document type to the process like REPP / RERV ...ETC. in the below path.
Spro - Flexible Real Estate Management (RE-FX) -- Accounting -- Integration FI-GL, FI-AR, FI-AP -- -----Account Determinatio ---- Define Document Type Determination ---> assign the document type against the process.
Hope it may helps you.
Regards,
Subbarao.Narne

Only Allow ONE Document Type??

Hi Experts,
we use the config "Define Account Assignment Cat. and Document Type for Purchase Requisitions" to assign document type for PM module.
What if i need more than one document types for different company code? seems like the system allows me to assign only ONE document type.
Please advise
Thank You

Hi ,
I think you can use the below exits for your requirement :-
1. COZF0001 [For PR doc changes to service ] and COZF0002[For PR document type changes to non stock material] .
2. You can use tables AUFK,EBKN,EBAN ...
regards
pushpa

Assign document type to sales area

Hi,
I created a new document type and know when i assign this document type to sales area < 1000/10/10 >, its giving an error message " define < 1000/10/10 >first as general sales area" .
I defined an sales area with that combination. can anyone help me in solving this?
Thanks,
Challa

Hi,
Step 1.
IMG (SPRO) -> Enterprise Structure -> Assignment -> Sales and Distribution -> Set up sales area.
Step 2.
IMG (SPRO) -> Sales and Distribution -> Sales -> Sales Documents -> Sales Document Header -> Assign Sales Area To Sales Document Types:
a. Combine sales organizations
b. Combine distribution channels
c. Combine divisions
d. Assign sales order types permitted for sales areas
Arthur.

Additional document types to Assign Fascimilies function

Hi all HCM Experts.
How do i add a document type like pdf to the assign fascimilies function.
As it is right now we only have the posiibility to upload jpg and word documents.

OPTT will help you.
Regards

Assign pricing procedure to billing document type

hi
i want to have to assign a pricing procedure to my billing document type
this secanario is for stock transfer where no sales order
only purchase order
kindly help me

Dear Krishna,
We don't assign Pricing Proceedure to Billing document Type. But we assign Document Proceedure to Billing Document type.
So you need to have a combination of Pricing Proceedure (sales areadocument pricing proceedure Customer Pricing procedure = Pricing procedure) where the Document Pricing Proceedure should be picked from Billing Document Type. Thus System automatically Pick the Pricing Procedure when you are creating a billing document.
Regards
MBS

Assigning PR document type to PO document type

Good day,
This is the scenario, I have multiple PR doc types each corresponding to a PO.
PR document types:
NB - standard
Z1 - internal1
Z1 - internal2
PO document types:
NB - standard
Z1 - internal1
Z1 - internal2
Objective: all Z1 POs should be reference to Z1 PRs.
Can SAP automatically assign/restrict the document type of PO based on PR document type? How?

Hi
I am not sure it will work or not
but check following link
[http://help.sap.com/saphelp_nw04s/helpdata/en/67/232037ebf1cc09e10000009b38f889/content.htm]
[http://help.sap.com/saphelp_47x200/helpdata/en/67/232037ebf1cc09e10000009b38f889/content.htm]
Regards
Kailas Ugale

Display mode for Account assignment category for NB document type

Dear MM gurus,
Is it possible to have Account assignment category field in ME21N for document type NB to be display only. Could any one please advised if this is possible?
Thanks in advance.

Hi,
Yes it is possible. But u have to define ur own Field selection for the PO document type and u have to assign it in the document type NB. Go to SPRO>IMG>MM>Purchasing>Purchase Order-->Define Screen Layout at Document Level

STOCK TRANSFER DOCUMENT TYPE

Hi Expert
i had made a new document for stock transport order, while making a po for STO i am getting below error.
Message no. 06674
Diagnosis
Settings have been made in Customizing specifying that document type ABCD is normally to be used for supplying plant 6600 and receiving plant 7700. However, you have chosen document type MNOP.
Procedure
Please choose the document type that has beem defined (ABCD).
Further notes
If this message is a warning, you can also continue with the originally chosen document type MNOP. The ordering process will then be handled in accordance with this document type.
Regard
Nabil

Hi,
You have created new document type for STO is MNOP & check the new STO document type MNOP is assigned to Supplying Plant, Receiving Plant or not. If not , just assign in following path:
SPRO --> Material Management -- > Purchasing-- > Purchase Order-- > Set up Stock Transport Order--- > Assign Document Type, One-Step Procedure, Underdelivery Tolerance
Note:
As another document type ABCD for STO is assigned to Supplying Plant, Receiving Plant, so system showing error message.
For more check the link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/4d/2b917843ad11d189410000e829fbbd/frameset.htm
Regards,
Biju K

Message : Document type doesnot allow you to assign to object VBAP

Similar Messages

Maybe you are looking for