Message; E_ADEPT_DOCUMENT_TYPE_UNKNOWN using Borrowbox.

Currently cannot borrow a library book using Borrowbox.
I get the message:
Error getting licence. Licence Server Communication Problem.
E_ADEPT_DOCUMENT_TYPE_UNKNOWN
There is no problem borrowing books from the library using Overdrive, and there was no problem when I last used Borrowbox on the 7th of September.

please make the book that you are trying to borrow is one of the below formats:
pdf, epub2, epub3.

Similar Messages

  • HT3529 Is there a way to create, store and use preset messages for use with "Messages"?

    Is there a way to create, store and use preset messages for use with "Messages". I often have a recurrinig message to send, after a repeating event, and need to enter the same short message each time. It would be nice to have this short message stored and selectable so that I do not need to enter each time.

    found an answer that seems to work:
    https://discussions.apple.com/message/17997300#17997300

  • I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I runni

    I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I running the computer. Is the hard drive damaged as laptop doesn't seem to recognize the start up disk ? If so, I presume I will have to put in a new one.
    There haven't been any problems with the computer, apart from a sticky curser,I have run a permissions programme from disk utility, there were a lot of different ones, but it seem to be able to fix them.
    Any comments or ideas ?
    Thank you in anticipation.

    First backup your users files off the machine to a external storage drive (not TimeMachine!)
    Most commonly used backup methods
    Next to startup from the disk, have it inserted, hold c or option/alt (wired or built in keyboard) and then boot the computer and or select the disk when it appears and click the arrow.
    Disk Utility is under the Utilities menu on the second screen.
    Step by Step to fix your Mac
    If you used the wrong 10.6 disk, it will spit it out or have issues, use the one that came with that machine or if it's defective, call Apple for a new one.

  • System error message while using maps check in

    today i got a lot of system error messages while using maps check in feature, and i tried everything from factory default to reinstalling mobile software and formating everything and yet nothing changed idk what to do and i use   the maps application a lot of times so i need this problem fixed please
    am using Nokia 500 btw

    today i got a lot of system error messages while using maps check in feature, and i tried everything from factory default to reinstalling mobile software and formating everything and yet nothing changed idk what to do and i use   the maps application a lot of times so i need this problem fixed please
    am using Nokia 500 btw

  • ERROR MESSAGE WHEN USING PACK COMMAND   Missing file ////presenter.css   Also:  "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course."  I have Java enabled in all browsers

    ERROR MESSAGE WHEN USING PACK COMMAND   Missing file ////presenter.css    Command then fails
    Also:  "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course."  I have Java enabled in all browsers
    Thoughts?  Using Presenter 10  Win 8.1  Intel I7  new HP with plenty of memory
                   Thanks

    I had saved one copy as an .asp but then resaved it to .xhtml 
    I'm assuming this is a static web site.  Rename (F2) all your pages with .html or .htm extension. 
    .xhtml is not a valid extension.
    Nancy O.

  • Error message when using xrpcc in JWSDP 1_0_01

    Dear all,
    I've got the following error message when using xrpcc of JWSDP 1_0_01 for my config.xml file.
    D:\jwsdp-1_0_01\Message>xrpcc -classpath build -both -d build config.xml
    error: invalid element "{http://java.sun.com/jax-rpc-ri/xrpcc-config}configurati
    on" in configuration file (line 2)
    The content of 'config.xml' is shown as follows.
    <?xml version="1.0" encoding="UTF-8"?>
    <configuration xmlns="http://java.sun.com/jax-rpc-ri/xrpcc-config">
    <rmi name="MessageService"
    targetNamespace="http://messageuri.com/wsdl"
    typeNamespace="http://messageuri/types">
    <service name="MyMessage" packageName="Message">
    <interface name="Message.MessageIF"
    servantName="Message.MessageImpl"/>
    </service>
    </rmi>
    </configuration>
    Thank you for your kind attention!
    Regards,
    Eddie

    Thanks all! I've already solved my previous problem, however, i got another one now.
    =========================================================
    error: unknown model info in configuration file (line 5)
    =========================================================
    <?xml version="1.0" encoding="UTF-8"?>
    <configuration xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config">
    <rmi name="MessageService"
    targetNamespace="http://messageuri.com/wsdl"
    typeNamespace="http://messageuri.com/types">
    <service name="MyMessage" packageName="Message">
    <interface name="Message.MessageIF"
    servantName="Message.MessageImpl" />
    </service>
    </rmi>
    </configuration>
    Thanks,
    Eddie

  • Error message when using search

    why do i keep getting an error message when using the "search" tabe in iTunes. This happend whe i upgraded t the latest version of itunes.

    Well, I believe JHeadstart does not really have this functionality.
    One way is use a Query Operator 'startsWith', but then you always query like LIKE '<entered search value>%'
    This is probably not what you want...
    But you could hack it into advancedSearch in YourApplicationModuleImpl
    try {
    if (viewCriterium.getQueryValue() != null) { //This is where exception JHS-00116 is raised...
    value = viewCriterium.getQueryValue().toString();
    } else {
    value = null;
    catch (NumberFormatException ex) {
    //insert check for wildcard
    value = viewCriterium.getValue().toString();
    if (value.indexOf('%')>=0) {          
    sLog.debug("Ja, een wildcard!!!");
    operator = "LIKE";
    } else {//original exceptionhandling code here...
    ...and a bit later, add test for "LIKE":
    if (viewCriterium.isDate() || viewCriterium.isString() || "LIKE".equals(operator)) {
    value = "'" + value + "'";
    very nasty code, and does not raise an exception for searches like '%xxx'
    Good luck,
    HJH
    Edited by: HJHorst on Mar 5, 2009 12:03 AM

  • Error message when using FM 'BAPI_BUPA_ADDRESS_CHANGE'.

    I'm continually getting an error message when using FM 'BAPI_BUPA_ADDRESS_CHANGE'. The message being 'Table BAPIADTEL entry to be changed not found in target system'.
    I have looked up this message but all links seem to refer to FM 'BAPI_BUPA_CENTRAL_CHANGE', which I'm not using, and has different parameter settings.
    I'm simply trying to update the telephone number and I'm updating strcuture BAPIADTEL and BAPIADTELX but still the message appears. I know that there is a really simple reason for this, but I have been double-checking everything and experimenting with lots of different areas, but with no effect.
    Has anyone encountered this problem using the specific FM ''BAPI_BUPA_ADDRESS_CHANGE' ?.
    Jason

    Hi Jason,
    In case your database tables had already value for field telephone number, then only the flag should be "U".
    If the telephone number field was empty, and we will try to change it by using the flag as U, it wont work. In this case, we should be using "I".
    I even wrote that before in this post, but somehow I guess the post was locked, and a lot of comments from you and me were not visible apart from the first two. So, I couldnt get any update from you.
    Anyway, its good that its working for you. Thank you for the update.
    Regards,
    Susanta

  • Error Message-When using DataScroller

    Hi
    I get the following error message when using DataScroller. I am using Oracle Jdeveloper 9i production release.
    Application Error
    Return
    Error Message: null
    java.lang.NullPointerException
         int oracle.jbo.server.ViewRowSetIteratorImpl.scrollRange(int)
         int oracle.jbo.server.ViewRowSetImpl.scrollRange(int)
         int oracle.jbo.server.ViewObjectImpl.scrollRange(int)
         int oracle.jbo.html.jsp.datatags.RowsetNavigateTag.doStartTag()
         void DataHandlerComponent.jspService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
         void oracle.jsp.runtime.HttpJsp.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
         void oracle.jsp.runtimev2.JspPageTable.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, java.lang.String)
         void oracle.jsp.runtimev2.JspServlet.internalService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
         void oracle.jsp.runtimev2.JspServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
         void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
         void com.evermind.server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
         void com.evermind.server.http.ServletRequestDispatcher.include(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
         void com.evermind.server.http.GetParametersRequestDispatcher.include(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
         void com.evermind.server.http.EvermindPageContext.include(java.lang.String)
         int oracle.jbo.html.jsp.datatags.ComponentTag.doStartTag()
         void Rate.jspService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
         void oracle.jsp.runtime.HttpJsp.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
         void oracle.jsp.runtimev2.JspPageTable.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, java.lang.String)
         void oracle.jsp.runtimev2.JspServlet.internalService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
         void oracle.jsp.runtimev2.JspServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
         void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
         void com.evermind.server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
         void com.evermind.server.http.ServletRequestDispatcher.include(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
         void com.evermind.server.http.GetParametersRequestDispatcher.include(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
         void com.evermind.server.http.EvermindPageContext.include(java.lang.String)
         void BrowseTab.jspService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
         void oracle.jsp.runtime.HttpJsp.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
         void oracle.jsp.runtimev2.JspPageTable.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, java.lang.String)
         void oracle.jsp.runtimev2.JspServlet.internalService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
         void oracle.jsp.runtimev2.JspServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
         void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
         void com.evermind.server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
         void com.evermind.server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
         boolean com.evermind.server.http.HttpRequestHandler.processRequest(com.evermind.server.ApplicationServerThread, com.evermind.server.http.EvermindHttpServletRequest, com.evermind.server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
         void com.evermind.server.http.HttpRequestHandler.run(java.lang.Thread)
         void com.evermind.util.ThreadPoolThread.run()

    Issue has been resolved .Ingnore this

  • Multi-Mapping and Message Split using BPM

    Hi All,
    Could anyone pls let me know clearly how message mapping can be done for this weblog
    /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
    Thanks,
    Ram

    Hi,
    When you are doing Message mapping after adding the Messaget types for source and target messages. You can click on the "" button in the target message and add one more tab. You can go to Message tab as shown in the 5th image and click "" button to add one more message type. Then do the mapping as usual.
    <b>Based on the value of the element(name), the node of input(details)should be directed to one of the two message types</b>
    Here in this blog it is done based on the Name.
    You need to use IFTHENELSE boolean function and do the mapping.
    Thanks,
    Prakash

  • In Mail, my message preview used to be shown to the right side of the messages.  Now it is showing below the messages.  How can I move it back to the right?

    In Mail, my message preview used to be shown to the right side of the messages.  Now it is showing below the messages.  How can I move it back to the right?

    Select the Viewing tab in the Mail preferences dialog and uncheck the box marked Use classic layout.

  • Adobe Air error message when using  PSE 10

    When I try using the tips in PSE 10 I get an error message from Adobe Air stating that it is damaged. Have tried uninstalling and re-installing, but that hasn't helped. I have windows 7

    Okay Jeff, this is as far as I have gotten so far. I'm using Air version 3.2.0.2070.  This is the install log.
    Runtime Installer begin with version 2.6.0.19140 on Windows 7 x86
    Commandline is: -silent -eulaAccepted -programMenu AdobeHelp.air
    Installed runtime (2.6.0.19120) located at C:\Program Files (x86)\Common Files\Adobe AIR
    Invoking Application Installer for combined install
    Launching subprocess with commandline C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp -silent -withRuntime -url -programMenu -eulaAccepted file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air
    Application Installer begin with version 2.6.0.19140 on Windows 7 x86
    Commandline is: -runtime C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp -silent -withRuntime -url -programMenu -eulaAccepted file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air
    Installed runtime (2.6.0.19120) located at C:\Program Files (x86)\Common Files\Adobe AIR
    Unpackaging file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air to C:\Users\Vette\AppData\Local\Temp\flaE4EA.tmp
    Application signature verified
    Unpackaging/validation complete
    No app located for appID 'chc' and pubID '4875E02D9FB21EE389F73B8D1702B320485DF8CE.1'
    Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\fla71A.tmp
    Native installation package creation succeeded
    Starting silent combined runtime update and app install.
    Updating runtime from version 2.6.0.19120 to version 2.6.0.19140.
    Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 3.5.23 to C:\Program Files (x86)\Adobe  using the source file at file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air
    Reinstalling C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp\setup.msi
    Installing msi at C:\Users\Vette\AppData\Local\Temp\fla71A.tmp\setup.msi with guid {BD7F1DA3-5EA0-65F8-52B0-5E103FDC045A}
    Application Installer end with exit code 0
    Subprocess app installer succeeded
    Runtime Installer end with exit code 0
    Runtime Installer begin with version 2.6.0.19140 on Windows 7 x86
    Commandline is: -silent "E:\Adobe Photoshop Elements 10\AdobePhotoshopDotcomInspirationBrowser.air"
    Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
    Invoking Application Installer for combined install
    Launching subprocess with commandline C:\Users\Vette\AppData\Local\Temp\AIR4EA4.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\Vette\AppData\Local\Temp\AIR4EA4.tmp -silent -withRuntime -url file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air
    Application Installer begin with version 2.6.0.19140 on Windows 7 x86
    Commandline is: -runtime C:\Users\Vette\AppData\Local\Temp\AIR4EA4.tmp -silent -withRuntime -url file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air
    Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
    Unpackaging file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air to C:\Users\Vette\AppData\Local\Temp\fla634C.tmp
    Application signature verified
    Unpackaging/validation complete
    No app located for appID 'PhotoshopdotcomInspirationBrowser' and pubID '4C35C4D325D350FE0114230CBADCA2DDD0AC8D25.1'
    Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\fla7325.tmp
    Native installation package creation succeeded
    Starting silent app installation to C:\Program Files (x86)\Adobe. Installing app PhotoshopdotcomInspirationBrowser.4C35C4D325D350FE0114230CBADCA2DDD0AC8D25.1 version 3.07 using the source file at file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air
    Installing msi at C:\Users\Vette\AppData\Local\Temp\fla7325.tmp\setup.msi with guid {4C184855-B85A-6873-C642-60A58682E721}
    Application Installer end with exit code 0
    Subprocess app installer succeeded
    Runtime Installer end with exit code 0
    Launching subprocess with commandline C:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
    Runtime Installer begin with version 2.6.0.19140 on Windows 7 x86
    Commandline is: -updatecheck
    Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
    Performing pingback request
    Pingback request completed with HTTP status 200
    Starting runtime background update check
    Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.6.0.19140/update
    Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.6.0.19140/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
    Unpackaging complete
    Download success
    Runtime updated downloaded
    User has selected immediate install of the update
    Starting runtime background update installation
    Launching subprocess with commandline C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background\updater -update
    Runtime updater successfully launched
    Runtime Installer end with exit code 0
    Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
    Commandline is: -update
    Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
    Relaunching with elevation
    Launching subprocess with commandline c:\users\vette\appdata\local\temp\airafa3.tmp\adobe air installer.exe -ei
    Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
    Commandline is: -stdio
    .\pipe\AIR_704_0 -ei
    Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
    Starting silent runtime update. Updating runtime from version 2.6.0.19140 to version 3.1.0.4880
    Installing msi at c:\users\vette\appdata\local\temp\airafa3.tmp\setup.msi with guid {FE23D063-934D-4829-A0D8-00634CE79B4A}
    Runtime Installer end with exit code 0
    Elevated install completed
    Runtime Installer end with exit code 0
    Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
    Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
    Commandline is: -updatecheck
    Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
    Performing pingback request
    Pingback request completed with HTTP status 200
    Starting runtime background update check
    Clearing unused background update directory
    Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.1.0.4880/update
    Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.1.0.4880/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
    Runtime update not available
    Unpackaging cancelled
    Runtime Installer end with exit code 0
    Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
    Commandline is: -arp:uninstall
    Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
    Runtime Installer end with exit code 6
    Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    Commandline is:
    Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
    Relaunching with elevation
    Launching subprocess with commandline c:\users\vette\appdata\local\temp\aire7af.tmp\adobe air installer.exe -ei
    Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    Commandline is: -stdio
    .\pipe\AIR_4784_0 -ei
    Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
    Starting silent runtime update. Updating runtime from version 3.1.0.4880 to version 3.2.0.2070
    Installing msi at c:\users\vette\appdata\local\temp\aire7af.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
    Runtime Installer end with exit code 0
    Elevated install completed
    Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
    Runtime Installer end with exit code 0
    Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    Commandline is: -installupdatecheck
    Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
    Performing pingback request
    Pingback request completed with HTTP status 200
    Starting runtime background update check
    Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update
    Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
    Runtime update not available
    Unpackaging cancelled
    Runtime Installer end with exit code 0
    Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    Commandline is: -arp:uninstall
    Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
    Relaunching with elevation
    Launching subprocess with commandline c:\program files (x86)\common files\adobe air\versions\1.0\resources\adobe air updater.exe -eu
    Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    Commandline is: -stdio
    .\pipe\AIR_3840_0 -eu
    Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
    Starting runtime uninstall. Uninstalling runtime version 3.2.0.2070
    Uninstalling product with GUID {47FA2C44-D148-4DBC-AF60-B91934AA4842}
    Runtime Installer end with exit code 0
    Elevated install completed
    Runtime Installer end with exit code 0
    Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    Commandline is:
    No installed runtime detected
    Relaunching with elevation
    Launching subprocess with commandline c:\users\vette\appdata\local\temp\airbda4.tmp\adobe air installer.exe -ei
    Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    Commandline is: -stdio
    .\pipe\AIR_764_0 -ei
    No installed runtime detected
    Starting silent runtime install. Installing runtime version 3.2.0.2070
    Installing msi at c:\users\vette\appdata\local\temp\airbda4.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
    Runtime Installer end with exit code 0
    Elevated install completed
    Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
    Runtime Installer end with exit code 0
    Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    Commandline is: -installupdatecheck
    Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
    Performing pingback request
    Pingback request completed with HTTP status 200
    Starting runtime background update check
    Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update
    Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
    Runtime update not available
    Unpackaging cancelled
    Runtime Installer end with exit code 0
    Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    Commandline is:
    No installed runtime detected
    Relaunching with elevation
    Launching subprocess with commandline c:\users\vette\appdata\local\temp\air2fa8.tmp\adobe air installer.exe -ei
    Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    Commandline is: -stdio
    .\pipe\AIR_5396_0 -ei
    No installed runtime detected
    Starting silent runtime install. Installing runtime version 3.2.0.2070
    Installing msi at c:\users\vette\appdata\local\temp\air2fa8.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
    Runtime Installer end with exit code 0
    Elevated install completed
    Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
    Runtime Installer end with exit code 0
    Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    Commandline is: -installupdatecheck
    Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
    Performing pingback request
    Pingback request completed with HTTP status 200
    Starting runtime background update check
    Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update
    Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
    Runtime update not available
    Unpackaging cancelled
    Runtime Installer end with exit code 0
    Application Installer begin with version 3.2.0.2070 on Windows 7 x86
    Commandline is: -playerVersion=11,2,202,233 -sandboxType=remote -securityDomain=airdownload.adobe.com -https=false -fromUserEvent=true -- -url http://www.adobe.com/support/chc/air/350/AdobeHelp.air -- WWW aHR0cDovL3d3dy5hZG9iZS5jb20vc3VwcG9ydC9jaGMv
    Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
    Begin air file download from http://www.adobe.com/support/chc/air/350/AdobeHelp.air
    Download destination is C:\Users\Vette\AppData\Local\Temp\fla7A97.tmp
    Received download status 200
    Response URL is http://www.adobe.com/support/chc/air/350/AdobeHelp.air
    Download success
    Unpackaging file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp to C:\Users\Vette\AppData\Local\Temp\flaB22B.tmp
    Application signature verified
    Unpackaging/validation complete
    No app located for appID 'chc' and pubID '4875E02D9FB21EE389F73B8D1702B320485DF8CE.1'
    Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\flaC7B.tmp
    Native installation package creation succeeded
    Starting app installation to C:\Program Files (x86)\Adobe. Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 3.5.23 using the source file at file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
    Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: Directory can't be written to" errorID=5006]
    Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime "c:\Program Files (x86)\Common Files" -silent -logToStdout -url -location "C:\Program Files (x86)\Adobe" -desktopShortcut -programMenu file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
    Relaunching with elevation
    Application Installer begin with version 3.2.0.2070 on Windows 7 x86
    Commandline is: -stdio
    .\pipe\AIR_4952_0 -runtime "c:\Program Files (x86)\Common Files" -silent -logToStdout -url -location "C:\Program Files (x86)\Adobe" -desktopShortcut -programMenu file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
    Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
    Unpackaging file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp to C:\Users\Vette\AppData\Local\Temp\fla3260.tmp
    Application signature verified
    Unpackaging/validation complete
    No app located for appID 'chc' and pubID '4875E02D9FB21EE389F73B8D1702B320485DF8CE.1'
    Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\fla3BF3.tmp
    Native installation package creation succeeded
    Starting silent app installation to C:\Program Files (x86)\Adobe. Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 3.5.23 using the source file at file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
    Installing msi at C:\Users\Vette\AppData\Local\Temp\fla3BF3.tmp\setup.msi with guid {BD7F1DA3-5EA0-65F8-52B0-5E103FDC045A}
    Application Installer end with exit code 0
    Elevated install completed
    Launching subprocess with commandline C:\Program Files (x86)\Adobe\Adobe Help\Adobe Help.exe
    Application Installer end with exit code 0
    Date: Thu, 12 Apr 2012 17:10:46 -0600
    From: [email protected]
    To: [email protected]
    Subject: Adobe Air error message when using  PSE 10
        Re: Adobe Air error message when using  PSE 10
        created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
    Vetteski65 I would recommend reviewing Troubleshoot AIR installation | Windows - http://helpx.adobe.com/air/kb/troubleshoot-air-installation-windows.ht ml for steps on how to resolve your difficulties.  Please feel free to respond to this thread if you have any questions about the steps listed within the document.  If you could also respond with the specific error message you receive it would be appreciated.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4331328#4331328
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4331328#4331328. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Is it possible to do message mapping using different namespace message type

    Hi all,
    Is it possible to do message mapping using different namespaces message types
    Example :
    i am having message type MT_1 in namespace http://sap.com/abc
    and second message type MT_2 in namespace http://partner.com/xyz
    so MT_1 can be mapped with MT_2 or not having different namespace.
    Thanks

    Read through my reply in this thread for Defining Software component dependencies.
    Though it explains this for Improted Archives, it also holds true for Message Types to be used in message mappings.
    Re: Payload Extraction
    Regards
    Bhavesh

  • BPE adapter : message not used by any process

    hi frnds,
    I've created 2 scenarios using BPM
    1) merge scenario: 2 msgs ==> BPM ==> 1 msg
    1st msg is going without any problem. but 2nd msg is giving error saying 'BPE ADAPTER ERROR: message not used by any process'. i checked in sxi_cache and found that return code for Intg'n process is 0 only. but still i tried reactivating. but no use
    2) split scenario: 1 msg ==> BPM ==> 2 msgs
    sender msg is going without any problem,but not receiving 2 rcvr msgs to the target directory. return code of IP is 0 and no other errors.
    after installing PI on my system, for the first time i'm trying BPM scenarios. simple file to file working properly. BPE adapter has to be activated manually or i missed any initial configuration??? pls help me to resolve this.
    thanks.

    abhishek,
    I have used the following steps in BPM for this scenario xml file ==> BPM ==>xml file
    1) data types: a)send_dt
                            b) rcv_dt
    2) msg types  a) send_mt
                            b)rcv_mt
    3) interfaces   : send_ob_im
                              send_abs_im
                              rcv_abs_im
                              rcv_ib_im
    in integration process,
    start ==> receive ==> send ==> stop
    so in general its like,
    send CC ==> send OB I/F ==> send ABS I/F ==> rcv ABS I/F ==> rcv IB I/F ==> rcv CC
    when i'm not using BPM, outbound queue SMQ1 is empty and messages are not stickking up there. but if i use BPM, SMQ1 is having entry saying 'SYSFAIL'. for the first time i'm doing  the BPM scenarios.
    thanks.

  • Multi-Mapping and Message Split using BPM UDFs Error

    hi
    As per the below blog
    Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure
    I have just modified the UDFs(1.selectnodeifA 2.selectNodeifB)
    1.selectnodeifA
    for(int i=0;i<=n;i++)
    if(Name<i>.equals("A"))
    result.addValue(Node<i>);
    2.selectNodeifB
    for(int i=0;i<=n;i++)
    if(Name<i>.equals("B"))
    result.addValue(Node<i>);
    while checking I am getting the following errors
    Source code has syntax error: 
    D:/usr/sap/D10/DVEBMGS01/j2ee/cluster/server0/./temp/classpath_resolver/Mapdc8fa4d0896011dd907d001cc01cef0d/source/com/sap/xi/tf/_bpm_mm_.java:132: cannot resolve symbol
    symbol : variable n
    location: class com.sap.xi.tf._bpm_mm_
    for(int i=0;i<=n;i++)
    ^
    D:/usr/sap/D10/DVEBMGS01/j2ee/cluster/server0/./temp/classpath_resolver/Mapdc8fa4d0896011dd907d001cc01cef0d/source/com/sap/xi/tf/_bpm_mm_.java:140: cannot resolve symbol symbol : variable n
    location: class com.sap.xi.tf._bpm_mm_
    for(int i=0;i<=n;i++)
    ^
    2 errors
    The source code given in the blog is correct ? I thought for loop has not completed
    pls help
    manian

    Hi manian,
    I was having a look to Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure blog.
    The functions are not the same. I mean, yours and blogs functions.
    Each function has two parameters, Name and node. Furtheremore, in the blogs' functions is using arrays and you don't.
    So, the right code will be
    1.selectnodeifA
    for(int i=0;i<=node.length();i++)
    if(Name<i>.equals("A"))
    result.addValue(Node<i>);
    However, if you don't need an advance user defined function as you want to process just one element of the node's queue, you will not need to use for sentence.
    Something like:
    1.selectnodeifA
    // for(int i=0;i<=n;i++)
    if(Name.equals("A"))
    result.addValue(Node);
    Hope it is usefull for you.
    Carlos

Maybe you are looking for

  • IPhone 3G, Camera Resolution

    I was looking for an answer on why my iPhone3G seemed to take Camera pics in 800x600 sometimes and 1600x1200 at other times. The other thread on this subject said it takes pics in 1600x1200 but when you email them they get reduced to 800x600 and the

  • Can't manage podcasts after installing itunes 11.1

    After installing itunes 11.1 and joined the crowd that can't manage old podcasts.  Where can I find a download for Windows 32 bit itunes version 11.0 or later?

  • Binary Format

    What are Binary Format. I took over a site and now using DW to update. I can't get Flash files to work and was told to make sure I'm using Binary Format. Does that happen with DW

  • After Effects CC verloren!

    Und ich hab die Testversion von After Effects CC heruntergeladen vor ca einem Monat. Da seht in der Cloud App das es "up to date" ist. Ich habe interne und externe Festplatte durchforstet ohne die Anwendung zu finden! BITTE HELFEN!!!l

  • BICA Retaining deleted query elements

    Hi All, I'm currently trying to do something in BICA (SSM7.5 SP7 and SP8) but I'm not understanding what is happening. Let me explain: - Create query in BW with some metrics and a single dimension - In BICA do the import of that query - The PAS datab