Message Entry MK001 does not exist in T499S-

Hi,
Would like to seek for your help as i have try to configure new fix
asset location in T-code:OIAS and successfully save it however when i
select the new location in the time dependent tab in the asset master
it prompt me an error message Entry MK001 does not exist in T499S-
check your entry.
Please advise whether i have miss out the step or the SAP system bug
and I am using Sap R/3 version 4.7 level 31 patch.
Please advise.
thank you.

Hi,
Please check the below thread, in which i have specified few SAP notes, which might sort your issue.
[AS02 : Location entry not possible in Timedependent tab;
Please check the attached notes too.
Thanks,
Srinu

Similar Messages

  • QM UD Error Message: Check table XEKBN: entry 45039875220001003 does not exist.

    Hello QM expert,
    I encounter a error when I make a UD. (Please refer to below screenshot. )
    Case 1: I did quantity post to unrestricted use, to scrap, to blocked stock, to new material, to reserves, return delivery. When I save this UD, there is a error message 'Check table XEKBN: entry 4503987522000100310100 does not exist.'  (PS. 4503987522 is PO number, but I don't know what it is about 10031010.)
    Case 2: I fill the same field like Case 1, but exclude to new material. It can be passed, no error message.
    Case 3: I only fill one field [to new material. It can be passed, no error message.
    Could you please give me some guidance? Thank you so much.
    Best Regards,
    Fanchao Bu

    Hi Fanchao,
    Form the inspection lot number range, I believe you are using GR form Purchase Order, right? Please confirm the below points -
    1. Is this a normal PO or Sub-contractor's PO?  Please confirm if this issue is happening for every stock posting like Unrestricted, Scrap, Blocked...? or just for one? Can you try one by one for example, move stock form QI => Unrestricted stock only (and do not combine all types together like the attached screenshot) and suggest if that is working.
    2. If this is a non-valuated material you have used (NLAG) for testing? Are you trying to post materials for previous period? Storage Location SM10 is valid?
    If still this issue exist, then potentially, there is some issue with valuation variant linked to valuation area, which is normally maintained in Configuration OPK9. Paralelly, you can request your ABAP team to check FM MB_UPDATE_VALUE_ENQUEUE_TABLE, Include LMBGBU04, as suggested by the below link -
    SAP ABAP Function Module MB_UPDATE_VALUE_ENQUEUE_TABLE - SAP Datasheet - The Best Run SAP Run SAPDatasheet
    You can also check SAP notes below, based on the business needs:
    1. 403671  - Error M7001: 'Please check table &...'
        401462  - Error M7001: 'Please check table &...'
        201833  - M7001: 'Please check table XEKPO: Entry & &...' 
        2072019  - Error M7001 raised during posting goods receipt
        407265  - Transfer parameter with BAPI BAPI_GOODSMVT_CANCEL (this may be linked to your return Delivery of 1 PC...)
        439945  - GR w/ freight costs for stock transport ordr w/ML currencies
        521090  - FAQ: Stock transfer to stock transport order
        867878  - Inconsistencies in the EKBE table because of conversions
        214814  - M7001/M7361: Table T156M, entry MAA7 2
        1584493  - Overdelivery check for GR blocked stock with GR-based IV
        102863  - GI f.delivery f.a stock transfer w.delivery costs
    2. 409529  - Price differences during goods receipt for purchase order
    3. 1528009  - MAA: incorrect distribution of goods receipt quantities
    4. 1569831  - MAA2: Composite SAP Note after Support Package SAPKH60504
    5. 406973  - M7001: Please check table XEBEFU: Entry does not exist
    6. 70577  - QA11: Error M7001 when posting qty in usage decision (OLD NOTE, May not be applicable)
    7. 824322  - QAC1: Incorrect batch in material document (Old Note, may no be applicable)
    Else, you can speak to MM team and/or FI team to help you better in this case, as I feel there is no much QM issues involved.
    Thanks,
    Arijit

  • "Entry sheet does not exist message no. SE012"

    Dear all,
    One SES is created and saved. Now if i check system message as below.
    "Entry sheet does not exist message no. SE012"
    Please advice

    Hi Deepu,
                    Please check in the PO, if in the Item Detail, The tab "Purchase Order History" is there or not, if it is there with the SES no, it means that the SES is created and you might not be able to view the same Please check the same no in the table ESSR.
    Hope it helps you.
    Regards,
    Yawar Kahn

  • Check table TFBEFU_CR: entry 10   does not exist

    Dear all
    When i am doing GR for Order (T.Code : MB31),the system displays the following message.
    Check table TFBEFU_CR: entry 10   does not exist
    plz give me the solution as early as possible,bcaz it is very urgent to me.
    Thanks in advance.
    Regards
    Basava sreenu

    Dear Mr.Basava,
    I'm not sure,but try with this.
    For the particular material which you are using in MB31 for Good's receipt for
    Order,check whether the storage location is present in  T code MMSC-Extend
    material storage location.If not add and save,then try in MB31.
    If useful reward points.
    Regards
    Mangal

  • Entry   IN does not exist in T005E - check your entry

    Hi,
    While creating New plant, the following message appears .
    "Entry   IN does not exist in T005E - check your entry"
    Thanks and regards
    Murugesan

    hi
    Try with OY01, make sure the country for your company code already assign to an ISO code
    ISO CODE : IN
    ISO CODE 3 Char : IND
    OX15 check what COUNTRY CODE you have mentioned for comapny code?
    Regards
    Edited by: WISH on May 22, 2008 1:30 PM

  • Backflush error  :  TFBEFU_CR: entry 10 does not exist

    Hi,
    while backflushing the following error is appearing :
    Check table TFBEFU_CR: entry 10 does not exist
    Message no. M7001
    What's missing. ? custo ? T-code ?
    Thanks.

    Hi,
    Please check Transaction OPK9 whether a valuation variant has been stored, or else check with your CO consultnat.
    Regards,
    satyajit

  • Delivery note/service entry sheet does not exist

    Dear Experts,
    I created Intercompany STO and  Return PO.   INVOIC (EDI Invoice) Idoc generated which failed  with error message :
    Delivery note/service entry sheet does not exist .
    So, Invoice was not created eventhough GR is completed for the PO.   
    For Inter company return PO case, I found out that,  GR Based Inv. indicator was checked and hence the idocs failed with above error message.
    When I tested with GR Based Inv. Unchecked,  Idoc was successfully processed and Invoice Created.  
    Why is it so?  why is this indicator resulting in the above error message.  Just cannot understand this.
    Experts, need your input here.  Thanks
    Regards
    Shashidhar

    hi,
    I've implemented the note 1903345 and it fixed the problem.
    Regards,
    Joseph

  • EDI 810 - Delivery note/service entry sheet does not exist

    Hello,
    When 810 Inbound Invoice IDOC is processed with two different materials having the same delivery note number using the function module IDOC_INPUT_INVOIC_MRM, the IDOC post with error code '51 Delivery note/service entry sheet does not exist'  Message class M8 Message number 183. The goods receipt has already been posted for the materials with the same delivery note number in SAP.
    Any feedback??
    Thanks

    Hi
    i had a Similar issue, where the IDOC is getting stuck with Delivery note does not exist.
    You can check Note 1063742. this may help you here. If the note does not work for you then there could be an issue with the fucntion module ME_SELECT_DOCUMENTS since it is only looking for table EKBE-VGABE. where vgabe EQ '1' OR vgabe
    EQ '6' but the delivery document no in the table is 8.
    I am guessing that this could be the issue. My Issue is still not resoved, so i thought of sharing my inputs with you.
    this may work for you.
    If this is already solved for you do let me know what has been done here.

  • Check table 169p: entry bal does not exist

    hi experts,
    this error (Check table 169p: entry bal does not exist) is comming while my end user is doing goods receit in t code MIGO .bal is the name of the com code and business area
    thanks&regards
    surya varma

    Hi,
    The message is issued as you have not yet maintained the parameters for invoice verification in company code BAL
    Please use transaction OMRG to maintain table t169P.
    Best Regards,
    Arminda Jack

  • Check table 169P: entry 9849   does not exist

    Check table 169P: entry 9849   does not exist
    Message no. M7001
    Diagnosis
    In table 169P the entry 9849   is missing.
    Procedure
    Make sure your entries are correct.
    If table  has not been maintained correctly, please inform your systems administrator.
    Plese tell me how to rectify this error
    regards
    Satish

    Hi,
    Please use transaction OMRG to maintain table t169P. Apparently you are
    missing an entry for company code 9849.
    Please assign points if it useful.
    Regards
    Ravinagh Boni.

  • Check table 150F: entry  O  does not exist

    Hi,
    when i am doing 102 (previous period) for a subcontracting order error message is coming
    Error: Check table 150F: entry  O  does not exist
    { Long text:
    Check table 150F: entry  O  does not exist
    Message no. M7001
    Diagnosis
    In table 150F the entry  O  is missing.
    Procedure
    Make sure your entries are correct.
    If table  has not been maintained correctly, please inform your systems administrator.}
    Where we maintain in customizing entry for this table ?

    Hi,
    To enter the special stock indicator O in the table go to SE16 and give input as 150F, click on contonue. Give O as special stock indicator. Thanking you.

  • Error "Check Table TFBEFU_CR : entry 10 does not exist" getting

    Hi All ,
    While doing Goods Receipt for Prodn Order , error "Check Table TFBEFU_CR : entry 10 does not exist" getting Prompted.
    Could u pls help me to solve it
    Regards
    Sandeep

    you need to apply the OSS  note 107588. it is excatly for the same problem yoy mentioned here.
    check the note

  • Table T169P: entry 1000   does not exist

    Hi,
    While doing the Goods Receipt, against Purchase Order, the following error is coming:
    Table T169P: entry 1000   does not exist
    Please guide.
    Regards,

    Hi All,
    Issued resolved.
    Table 169P refers to Parameters, Invoice Verification. This is available under
    IMG>Materials Management>Logistics Invoice Verification>Incoming Invoice>Set Check for Duplicate invoices.
    Regards,

  • Source message Message Type: POR does not exist in software component versi

    HI All,
    I have a .tpz file exported from an SRM 4.0 PI system which i have imported in SRM 7.0 ECC 6.0 PI.
    I have imported the .tpz file through the import through "client" option.
    I am able to open all the objects but i am not able to open the Message mappings.....
    It is throwing the following error:
    Source message Message Type: PurchaseOrderRequest does not exist in software component version xx_xx_PO_PROCESSING, 1.0 of xx.com Check whether software component version xx_xx_PO_PROCESSING, 1.0 of xx.com is in the Enterprise Services Repository. Import this or a newer version if necessary.
    This needs to resolved very urgently...
    Kindly help...
    Thanx in advance..
    Nandan

    Hi,
    I'd say you need to import some other SWCV which has all the IDOC typos you use in your scenario
    probably this is a prerequisite for importing your SWCV
    I don't think this is related to sp level or anything like that
    it's just that SWCV is missing
    Regards,
    Michal Krawczyk

  • Command $TAB : message Transaction $TAB does not exist Message no. S#343

    when i use the command $TAB to refresh the buffers the system gives me the message
    " Transaction $TAB does not exist
    Message no. S#343 "
    In some systems it works as intended. How can i correct that position.

    try /$TAB

Maybe you are looking for

  • Display non-english characters

    Hi, How can i display Japanese, Chinese characters in a java application or applet? do i need some special tools? Thanks, eileen

  • Combo chart in WAD

    Hi All, I have two queries one is displaying Current week Sales and the other one is displaying Previous week sales.I have assigned the column Chart for Current week query in WAD,i want to display the last week data also in the same chart as a Line g

  • CS6 Fluid Grid Layouts - opening CSSTransitions panel crashes program

    Hi there, I'm on my second web page and this old problem has come up again. I've asked about this before but I'm afraid I never got to the end of it, I just worked around it. After I open the transitions panel, I then press the + button, then it cras

  • NWDS Versions

    Hi all, our NWDI is installed on a CE 7.1 EHP1 and we need to create different applications in three systems: NW 7.0 SP07, PI 7.1 SP09 and NW CE 7.1 EHP1 SP03.  I have some simple questions: can I use NWDS 7.1 EHP1 to create and deploy all the applic

  • [CUA] Future developments

    Hi, It is said in the [Wiki|https://wiki.sdn.sap.com/wiki/display/Security/FAQ-SAPNetWeaverIdentity+Management] The CUA is still active: SAP has developed and will ship several strong improvements for the CUA central system (e.g. improved user interf