Message erreur Nouvel événement emplacement non valide
message:
users/nello/Movies/Final Cut Events/Nouvel événement 12-03-13 6/CurrentVersion.fcpevent n’est pas un emplacement valide pour un fichier de document.
Je ne retrouve pas mes dossiers ???
impossible de travailler avec Final cut X
Moving discussion to Muse forum.
Similar Messages
-
Je n'arrives pas à ouvrir iTunes, lorsque que j'essaye un message d'erreur s'affiche : "nouvelle bibliothèque iTunes".
Pouvez-vous m'aider ?I do not manage to open iTunes when I try an error message appears: "new iTunes library."
Can you help me?
Translated by Google
Sometimes this error is a symptom of a corrupt library.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library as iTunes Library (Corrupt) and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
Parfois, cette erreur est un symptôme d'une bibliothèque corrompue.
Bibliothèque vide / corrompu après mise à niveau / crash
Espérons que cela n'a pas été trop long depuis le dernier iTunes à niveau, en fait, si vous obtenez une bibliothèque vide / incomplète immédiatement après la mise à niveau alors avec les étapes suivantes, vous ne devriez pas perdre une chose ou besoin de faire tout autre ménage. Notez que dans iTunes 11 une bibliothèque "vide" peut montrer vos achats passés avec des liens pour écouter ou télécharger.
Dans le dossier des bibliothèques iTunes précédente devrait être un certain nombre d'iTunes datés fichiers de la bibliothèque. Prenez le plus récent d'entre eux et le copier dans le dossier iTunes. Renommez bibliothèque iTunes comme iTunes Library (corrompu) et puis renommez le fichier restauré iTunes Library.itl. Démarrez iTunes. Devraient tous être bon, le bar tous les ajouts récents ou retrait de votre bibliothèque.
Alternativement, selon exactement quand et pourquoi la bibliothèque a disparu, il peut y avoir un fichier plus récent. Tmp dans le dossier principal d'iTunes qui peuvent être rebaptisé iTunes Library.itl pour rétablir la bibliothèque à un état récent.
Voir iTunes Watch Folder d'un outil pour rattraper les changements depuis le fichier de sauvegarde a été créé.
Lorsque vous obtenez tout travail de faire une sauvegarde!
Si vous êtes dans la position inconfortable où vous n'êtes plus en mesure d'accéder à votre bibliothèque d'origine, ou une sauvegarde de celui-ci, puis voyez Récupérez votre bibliothèque iTunes à partir de votre iPod ou votre appareil iOS.
Traduit par Google
Bon chance!
tt2 -
Erreur de génération de contenu. [Erreur: Ressource non valide]
Please help I've this stupid message and I don't know why… I checked each link
Erreur de génération de contenu.
[Erreur: Ressource non valide]Bonjour Kant,
J'ai tenté de faire une construction basée sur le même VI et dans la même version de LabVIEW que vous; je n'ai pas rencontré de souci pour l'heure.
Je suppose que partant du VI où vous avez enlevé le VI de décimation, après enregistrement de votre VI, si vous replacez le VI de décimation, vous obtenez le même résultat.
Pouvez-vous, à partir d'un nouveau projet, construire un exécutable basé sur VI qui contient uniquement le VI de décimation en question?
Vous pourriez aussi tenter de recompiler toute la hiérarchie de votre VI en faisant Ctrl+Shift+Click sur Run.
Bonne journée,
Flo
Open Diagram First -
SQL2012 SP1 SE Core - setup.rll - erreur installation ID 5000 valeur _ est un caractère non valide
Hello,
I get an error at the launch of 'Installation' in the setup of SQL Server 2012 Standard Edition SP1 64-bit 2 cores (see attached screenshots):
'.' valeur hexadecimale 0x00 est un caractère non valide. Ligne 1, position 1400259
- WinServer 2008 R2 Standard SP1
- SQL Server 2008 already installed :
Microsoft SQL Server Management Studio 10.0.1600.22 ((SQL_PreRelease).080709-1414 )
Outils clients Microsoft Analysis Services 2007.0100.1600.022 ((SQL_PreRelease).080709-1414 )
Microsoft Data Access Components (MDAC) 6.1.7601.17514 (win7sp1_rtm.101119-1850)
Microsoft MSXML 3.0 5.0 6.0
Microsoft Internet Explorer 9.11.9600.17126
Microsoft .NET Framework 2.0.50727.5477
Système d'exploitation 6.1.7601
Thanks for your feebacks.Hello,
It seems the SQL Server media is corrupted. Please read the following Support article, and follow instructions contained
on the Resolution section of the article.
https://support.microsoft.com/kb/2449398?wa=wsignin1.0
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Bonjour. Je suis bloqué sur l'installation des produits ADOBE. Je souhaite réinstaller PSE 12 et j'ai le message "Clé non valide pour l'utilisation dans l'état spécifié". Le N° série (24 chiffres) est celui indiqué sur la boîte du logiciel. Je ne peux pas installer "Acrobat " et "Air". Merci d'avance pour l'éclairage que vous pourrez m'apporter. Patrick.
Bonjour,
Lorsque vous rencontrez cette erreur,Lancez le programme en tant qu'administrateur puis changez le répertoire d'installation sur un autre lecteur (exemple Disque D: ), j'ai rencontré le problème et cette solution a fonctionné pour moi.
Bien cordialement -
Bonjour. Je ne parviens pas à installer la version d'essai de PSE premiere 12. J'ai déla la version PSE Photoshop 12 qui est installée et qui fonctionne correctement. J'ai le message "cle non valide pour l'utilisation dans l'etat specifie" qui apparaît. Merci d'avance pour votre aide.
Bonjour,
Lorsque vous rencontrez cette erreur,Lancez le programme en tant qu'administrateur puis changez le répertoire d'installation sur un autre lecteur (exemple Disque D: ), j'ai rencontré le problème et cette solution a fonctionné pour moi.
Bien cordialement -
SQL Commands - ORA-00900: instruction SQL non valide
Hi everyone,,
i have installed Oracle Xe on a Centos 5.5 host yesteday.
Installation was Ok, i can connect to the web interface on "http://127.0.0.1:8080/apex/".
But when i want to use sql comands, what ever the command entered ,i have the "ORA-00900: instruction SQL non valide" message.
I can enter "Show all" command, for exemple, in an terminal view after SQL> prompt , it works... but not in the web interface...
I've tried to import .sql script also, trought the web interface, no much result, no display in the window.
Someone can help me,
thanks,I'had no error messages during installation, so.. i thing everything is ok.
i try simple commande like "Show all" , this command works on terminal view.
Maybe i could try to reinstall or upgrade the version i use ( oracle-xe-10.2.0.1-1.0.i386.rpm )
.. but tomorrow, it's 2AM in Paris , i need to sleep :-) -
Itnues : clé non valide pour l'utilisation dans l'état spécifique
Bonjour,
Actuellement je rencontre un problème pour réinstaller iTunes, l'erreur a l'installation est :
clé non valide pour l'utilisation dans l'état spécifique.
j'ai désinstaller la vers 11.3 et souhaite réinstaller la dernière version.
Avez vous une idée pour résoudre mon problème ?
Pour information mon système d'exploitation est Windows 8.1
Merci.
PatinatorCurrently I have a problem to reinstall iTunes, the error is the installation:
Key not valid for use in specified state.
I have to uninstall 11.3 and would reinstall the latest version.
Do you have an idea to solve my problem?
Information for my operating system is Windows 8.1
Translated by Google
For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
Pour "Clé non valide pour l'utilisation dans l'État spécifiées" erreurs Essayez de déplacer le dossier RSA à partir de C:\Users(?)\<utilisateur>\AppData\ Roaming\Microsoft\Crypto\RSA à dire C:\RSA (juste au cas où il devrait y avoir un besoin de restaurer), puis relancez l'installation. Ce dossier semble agir comme un cache et doit être reconstruit automatiquement selon les besoins.
Certains noms de dossier peuvent ne pas avoir traduit correctement
Traduit par Google
For further advice if needed see Troubleshooting issues with iTunes for Windows updates
tt2 -
Dans l'identifiant, dans donnéés de facturation, quand j'entre mon code de sécurité, je reçcois le message que le code n'est pas valide. Mais c'est le bon code sur ma carte. Quoi faire pour que ça fonctionne
Bonjour et merci de votre réponse,
C'est pourtant ce que j'ai fais non ? (Voir VI en pièce jointe ou l'impr écran)
lI n'y a donc pas moyen d'éviter ce "décalage" dont je parle plus haut ?
Pièces jointes :
Panel_OK.vi 353 KB
Panel_OK impr écran.PNG 31 KB -
When I try to make a purchase at the App Store or iBook store or at iTunes an error message tells me my account is not valid for the UK store. I've no idea how I got connected there and I'd like help getting back to Canada where I live. Any suggestions?
Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you are located.
8. Tap "Done". -
Error Message = 3205: '~WF_ADHOC-1446' is not a valid role or user name
Hi,
I have an Item attribute of type 'Role' ('CREDIT_COMMITTEE_MEMBERS') and I am using that attribute as performer for two notification activities.
For first notification, I create an adhoc role and assign it to the attribute and the notification goes successfully.
I want to send reminder to the people who have not responded to the first notification.
So I used the following query:
SELECT recipient_role
FROM wf_notifications
WHERE (message_name = 'MSG_TO_CREDIT_COMM_NEED_APPR' or message_name = 'MSG_REMINDER_CREDIT_COMM')
AND item_key = itemkey
AND status = 'OPEN';
The following code was used to update the Item attribute of type "Role"
FOR rec_cc_role_names IN cur_cc_role_names
LOOP
IF l_role_count = 0 THEN
l_role_users := rec_cc_role_names.recipient_role;
ELSE
l_role_users := l_role_users || ' ' || rec_cc_role_names.recipient_role;
END IF;
l_role_count := l_role_count + 1;
END LOOP;
wf_directory.createadhocrole
( role_name => l_role_name,
role_display_name => l_role_display_name,
notification_preference => 'MAILTEXT',
role_users => l_role_users,
expiration_date => NULL);
wf_engine.setitemattrtext
( itemtype => 'XXCCVOTP',
itemkey => itemkey,
aname => 'CREDIT_COMMITTEE_MEMBERS',
avalue => l_role_name);
The second notification activity is throwing the below error
Error Name = WFNTF_ROLE
Error Message = 3205: '~WF_ADHOC-1446' is not a valid role or user name.
Error Stack =
Wf_Notification.SendGroup(~WF_ADHOC-1446, XXCCVOTP,
MSG_REMINDER_CREDIT_COMM, 07-APR-10, WF_ENGINE.CB)
Wf_Engine_Util.Notification_Send(XXCCVOTP, 154009, 186344,
XXCCVOTP:MSG_REMINDER_CREDIT_COMM)
Wf_Engine_Util.Notification(XXCCVOTP, 154009, 186344, RUN)
Kindly help.
Thanks,
AmitThe users list was null for the role, which was causing the error. The query populating the user list was not returning any row.
-
Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain
-
HT4623 Unable to send text message from iphone 4 to a non-iphone.
I have just bought an Iphone 4 with ios 7.1.
And when i am trying to send text message from my phone to a non-iphone devices it just showing a green (text background & loading bar), but still after some time the message was not getting delivered.
As per the apple support. I have already put +91 for all my numbers even deleted & create new contacts.
But the problem is still there.
I have also tried to change the setting for iMessage (On/Off).
So, please suggest.Thanks for getting back to me. I did understand that part, but didn't get
wheather you could reply to a message you had received. I understood that
you could not originate a new text. -
I was trying to buy an app from the apple store, it asked for confirmation , when I re-entered my credit card details, got the message that your payment method is not valid!!!! How can I fix this problem?
Is this a pre-paid card thing? Or different billing address than your iTS account?
-
I downloaded Firefox 4.o exe. When I tried to open it I got an error message stating that it was not a valid Win32 application. I am using windows XP SP3. How do I get it to open?
[[Firefox is already running but is not responding]] has steps that you can try. It sounds like you may have something that is hanging your browser on exit (probably an extension or a locked profile) and the steps on that page should help clear it up.
Maybe you are looking for
-
HELP! Why does my Drag and Drop not work Completely?
Hello! I'm working on an ActionScript 3 movie clip in Adobe Flash. In the interactive movie I want the user to create a snowman with the parts on the left side. (Picture below.) On the right side I have the snowman slightly visible, so the user knows
-
Hi all, If suppose we don,t have delta facility in generic extraction on R/3 for Master Data. how can we maintain the delta for that one in BW. Thanks & Regards, Sri
-
Anyone plz tell me how to capture an applet to clipboard..
I'd like to capture my applet, that I've built before, to clipboard. Otherwise, I'd like to define its boundary for capturing also. The problem is the Java version that I use is 1.1, and I don't know how to capture it. If there isn't any method to su
-
Help, I`m new to Java
I have to write an applet that reads in the size of a square and displays a hollow square of that size out of asterisks using the drawString method. Please can some 1 help me in starting me off. Thanx
-
All my events on the calendar erased and it won't add more
My calendar on my iphone 5c erased all of my events and I keep trying to add events and it's not working I think it might be because I don't have that much memory but I am about to fix that but what else can I do and also when and if I get it fixed w