Message "error #1 converting file message="(20)word(ver.xp)could not be found" when converting Word

I have users who can't convert Microsoft Word 2000 documents in Designer 7.0. 1 user is using a Dell Optiplex GX260 running Windows 2000 SP4, P4 1.8 Ghz, 512 MB RAM. Another user is working on a Dell Latitude D610 also running Windows 2000 SP4, Pentium M 1.73 Ghz, 512 MB RAM. Both of these users have Adobe Acrobat 7.0 Professional, I have applied the 7.0.5 patch. Both users have Microsoft Office 2000 SP-3. Any Ideas???

Well, as mentioned in the Designer Help you can convert Word files from Word XP and Word 2003, it doesn't mention Word 2000, so that is probably the problem (unsupported format).
If Acrobat is installed on the machines you can probably export out to a PDF from Word and then import that PDF into Designer as an alternative work flow. Though, off the top of my head I'm not sure if that is supported in Word 2000 either, but could be worth a try.
Chris
Adobe Enterprise Developer Support

Similar Messages

Error -2003: a data handler needed by the movie could not be found

Hello.
I just purchased QuickTime Pro and the MPEG-2 add-on for it, for the single purpose of transcoding some MPEG-2 recordings to H.264. However, when I try to open any of my MPEG-2 files in Quicktime, I get the message: "error -2003: a data handler needed by the movie could not be found (my-filename.mpg)"
I can play these files in a number of different free players--VLC, Mplayer, Windows Media Player, RealPlayer... but not in the player I paid $50 for.
Can someone please help me?

That doesn't really help. Besides, I haven't even got to the point where I'm trying to export. I get this error message when I try to open the file. I can't even play back the clip.
And the MPEG-2 page clearly states: "The QuickTime MPEG-2 Playback Component provides QuickTime users with the ability to import and play back MPEG-2 content, including both multiplexed (a.k.a. muxed, where the audio and video tracks are interleaved together into one track) and non-multiplexed (a.k.a. elementary) streams."
Also, Streamclip crashes when I try to load my MPEG-2 clips, so that's not going to work (and even if it did, I am trying to find a simple way to take the HDTV content I've recorded off the air and get it onto my AppleTV--I want fewer steps, not more).
Looks like I'll have to waste some time calling customer service to get a refund, since there's no way to do this via the website.

Error message: Table could not be found when opening reports with InfoView or CMC

Post Author: Giovanni
CA Forum: Authentication
Hi All,
I have Crystal Reports Server XI R2 installed on a server and the database folder (foxpro) is located on a different server. Crystal is connected to the database using an ODBC connection (UNC path).
When I try to preview a report in Infoview or CMC I get the following error: "There was an error retrieving data from the server: The table 'dp' could not be found. Error in File C:\WINDOWS\TEMP\{BC665D6D-95DE-426B-A7A2-EBF9D23F42F4}.rpt: The table could not be found."
dp is the name of one of our tables.
If I publish a report that uses sql database or a foxpro db that is located on the same server as Crystal Server I donu2019t receive any error message..
Please help if you can and thanks in advance.
Giovanni

Post Author: colin mackenzie
CA Forum: Authentication
Hi Giovanni.
This post of yours is going on 2 weeks old.
Have you solved your problem?

Issue after installing Designer 10.1.2 on Windows7 - ???-21705: The .msb message file for product "Unknown", utility "CDR" could not be found

Hi,
I installed Oracle Designer 10.1.2 on my laptop which is running Windows7. I followed the recommendations to make run the setup.exe file (compatibility SP2 & Run as administrator) but while the installation I got the error message twice or 3 times: "The procedure entry point GetProcessImageFileNameW could not be located in the dynamic library PSAPI.DLL". I skipped this message and the installation ended with success anyway. Starting the first Designer windows works well. Though when I click on the des2k61.exe file and once I entered the correct Repository Owner/password and connect string I got the message:
???-21705: The .msb message file for product "Unknown", utility "CDR" could not be found.
For information I used to have Designer 10.1.2 on my former laptop (also Windows 7) and it works well. I migrated my DB (11.2.0.2) to the new PC which includes the repository owner I'm trying to use.
Any idea about the possible origin of the issue?
Thanks in advance for your help.
Kind regards,
Yves

Hi,
I installed Oracle Designer 10.1.2 on my laptop which is running Windows7. I followed the recommendations to make run the setup.exe file (compatibility SP2 & Run as administrator) but while the installation I got the error message twice or 3 times: "The procedure entry point GetProcessImageFileNameW could not be located in the dynamic library PSAPI.DLL". I skipped this message and the installation ended with success anyway. Starting the first Designer windows works well. Though when I click on the des2k61.exe file and once I entered the correct Repository Owner/password and connect string I got the message:
???-21705: The .msb message file for product "Unknown", utility "CDR" could not be found.
For information I used to have Designer 10.1.2 on my former laptop (also Windows 7) and it works well. I migrated my DB (11.2.0.2) to the new PC which includes the repository owner I'm trying to use.
Any idea about the possible origin of the issue?
Thanks in advance for your help.
Kind regards,
Yves

Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

I have searched my computer for that file SQlite3.dll and also file QTCF.dll and I cannot find either one when I search my whole computer for it. I cannot fix this! I deleted Itunes and every time I try to download it, it goes through all this download till the end when it says that iTunes.exe-entry point now found and that Procedure entry point message comes up. HELP! This is driving me crazy. How can I get itunes to work again when I can't find the danged .dll file to remove, move or rename!?!?!??

Deskjet 2542 all in one error: 'the specified module could not be found' when installing to USB

Installation proceeds OK until the USB cable is connected, when the error message is displayed and installation ceases.
I have successfully istalled and run the printer on another XP PC of a similar age - ie old.
I have upgraded the XP OS to SP3 with numerous updates;
Checked that the USB ports read Data sticks OK;
run a/v and malware programs, including Microsoft Safety Scanner;
checked that USB drivers are up to date;
uninstalled driver software and re-installed with software downloaded from HP;
carried out the procedures detailed in HP Support Forum 4022116
Error message the same.
This is for my elderly neighbour - help please!
This question was solved.
View Solution.

Hi @bodger50,
Welcome to the HP Forums!
I understand that your HP Deskjet 2542 gives you the error: 'the specified module could not be found' when installing to USB, on Windows XP.
I would recommend going through the steps in this post, Re: Install Error "The system cannot find the file specified" (hpzprl40.exe). When you get to the printer install wizard section, just use the full feature software and drivers found at this website, HP Deskjet 2540 All-in-One Printer series Full Feature Software and Drivers. As the printer install wizard is only for Windows 7 and up.
Hope this is helpful, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Installer LV7.1 - LabVIEW load error code 21: An external subroutine required for execution could not be found.

Bonjour,
Je cherche à créer un installer portatif utilisant les drivers NI-DAQmx 8.7.1 et NI-CAN 2.6.0.
Je dispose d'un code LV 7.1 et j'ai installé l'application builder 7.1.
Mais une fois l'application installé sur un PC vierge de Labview, j'obtiens le message suivant:
load error code 21: An external subroutine required for execution could not be found.
Ce message est répété plusieurs fois (pour différents VIs) puis le programme ne se lance pas.
J'ai bien veillé à installer les drivers NI-CAN et NI-DAQmx correspondant au préalable sur la machine cible.
En chercant sur le forum, plusieurs pistes m'ont été proposé:
La version NI-DAQ
L'intégration du Run time Engine
Un problème de DLL
J'ai vérifié ces 3 points mais cela n'a pas règlé mon problème.
Résolu !
Accéder à la solution.

Bonjour,
Merci de ta réponse.
En fait, j'ai bien inclu le runtime engine de Labview qui était effectivement la source de l'erreur.
L'installation de NI-DAQmx v 8.7.1 provoque la mise à jour de la version du runtime engine (passage de 7.1 à 7.1.1).
J'ai donc désinstallé Le runtime engine 7.1.1 (ce qui a provoqué la désinstallation de labview et NI-DAQ).
Puis je suis passé par une version plus ancienne de NI-DAQ (7.2) que j'ai adapté (inclusions de DLL et de VIs).
Les messages d'erreurs ont alors tout simplement disparus!

I successfully uploaded a book using iBook Author. I need to make a correction. I keep getting this error message: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets: assets/media/chick02.m4p" at Book (MZItmspBookPackage)

I appreciate any help or assistance. I have been trying to update one of my books for for the past few days with no success. I really just need to change two letters. But since I was updating I thought I would make a couple more improvements. I clicked disable portrait and made my pictures a little bigger to fit the whole page. But now I keep getting this error for multiple sound effects throughout the book. ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets: assets/media/chick02.m4p" at Book (MZItmspBookPackage). I did not change the audio. The audio files are placed in widgets. I had no problem the first time it uploaded. I have recreated my whole book from scratch and it still does not work. Does anyone have a suggestion? Thank you for your attention to my question.

Florida author wrote:
Could it matter that I am dragging my audio files onto my document? They appear to be in a widget once dragged in. I use the widget insector to make changes. However, I did not go to the top of the screen and click widget and then insert my audio file.
I don't believe that would make any difference. Drag-and-drop is just a UI shortcut for using the menu items.
Also some of the audio file were used in previous books. Would that cause an error?
No. Each book is a stand-alone entity. It doesn't matter if the same audio file appears in another book.
From what people have reported here, it looks like there is a bug in the submission system. Other than trying the suggestions posted in the linked-to thread, I don't think there is anything you can do to fix it.
I would submit a bug report to Apple though. Quite a lot of people seem to be affected by this problem, and if they hear about the same problem from lots of different sources, that will (presumably) elevate the importance of fixing it.
Michi.

Getting error message "the requested item could not be found" when trying to install Firefox on my android.

I had to uninstall Firefox for Android because I was having problems logging in to sync. I got a support e-mail to uninstall and reinstall because the sync issue had been fixed. I uninstalled the Firefox app and then when I tried to reinstall it I get the error message on my phone "the requested item could not be found." HELP!

Some supported phones are not displaying Firefox in the Market for some reason. We're still investigating this. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
and then download the app directly from here:
http://ftp.mozilla.org/pub/mozilla.org/mobile/releases/4.0b3/android-r7/multi/
(Note: If your phone is from AT&T, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

What does this message mean: This song could not be used because the original file could not be found--When I try to play songs there is an "!" next to it.

A friend recenlty replaced my hard drive.
When I try to use itunes--I receive this message: "The song could not be used because the original could not be found, would you like to locate it? Next to my songs I see this: "!" Help--Please!!

Well what happened is the pathname to the song has changed slightly.
For instance if the song was located say c\:Windows\User\Mary\Music\iTunesFolder
and now it's c:\Windows\User\MaryXray\Music\iTunesFolder
I'm assuming here your music was replaced in the Music folder like on the old hard drive, that iTunesFolder was simply copied over in whole.
So to fix things, you go into the iTunes Folder in your Music Folder and look for a iTunes Music Library .XML file and open it in a Text Program that has "find and replace" ability.
You find the partial pathname of the old drive and you replace ALL instances of it with the new pathname.
so \Windows\User\Mary would be changed to
\Windows\User\MaryXray
Save the file and reopen iTunes.

I get this message "Cannot save the file as the font "ArmenianLSU-italic" could not be embedded because of licensing restrictions. Turn off the pdf compatibility option and try again. I have this file from when I had CS4. It worked then. I trying to make

I get this message when I am trying to save a file that was done in CS4, now using CS6 "Cannot save the file as the font "ArmenianLSU-italic" could not be embedded because of licensing restrictions. Turn off the pdf compatibility option and try again." Even if I start a new file I unable to save it with this font. I need to use this font.

Then you need to outline all text before savng the PDF.
Make sure you do this on a copy of the file.

Fix for "necessary file could not be found" when syncing photos

During the holidays I found the fix for an annoying error message when syncing my iPod Touch (2nd gen), my wifes iPhone 3GS and my iPhone 4, that I'm pleased to share with you all:
The problem was that iTunes gave an error message that "an necessary file could not be found" (my own translation from the Danish wording) when I tried syncing photos - and then syncing stopped/aborted all together. Very annoying!
But it wasn't all photos that triggered this error, only some. I've tried switching usb-port, removing special folders inside "Pictures" and inside "Library" etc.
Yesterday I tried to remove the "iPod Photo Cache" folder inside the iPhoto Lib itself. And that resolved this issue! Eg. ctrl-click the iPhoto Lib file, show content of package and delete/move the "iPod Photo Cache" folder to trash.
Hope this will help others!

Had the same problem, but with music only. Thank you for the information
http://www.sccs.swarthmore.edu/org/sbc/old/orgs/sbc/files/wage/13/index.html
http://www.sccs.swarthmore.edu/org/sbc/old/orgs/sbc/files/wage/14/index.html
http://www.sccs.swarthmore.edu/org/sbc/old/orgs/sbc/files/wage/15/index.html
http://www.sccs.swarthmore.edu/org/sbc/old/orgs/sbc/files/wage/16/index.html
http://www.sccs.swarthmore.edu/org/sbc/old/orgs/sbc/files/wage/17/index.html
http://www.sccs.swarthmore.edu/org/sbc/old/orgs/sbc/files/wage/18/index.html
http://www.sccs.swarthmore.edu/org/sbc/old/orgs/sbc/files/wage/13/map.html
http://www.sccs.swarthmore.edu/org/sbc/old/orgs/sbc/files/wage/14/map.html
http://www.sccs.swarthmore.edu/org/sbc/old/orgs/sbc/files/wage/15/map.html
http://www.sccs.swarthmore.edu/org/sbc/old/orgs/sbc/files/wage/16/map.html
http://www.sccs.swarthmore.edu/org/sbc/old/orgs/sbc/files/wage/17/map.html
http://www.sccs.swarthmore.edu/org/sbc/old/orgs/sbc/files/wage/18/map.html

Error trying to delete CRM trans. Administration header could not be found

We were trying to delete a few transactions (Leads & Opportunities ) from our system using T code: CRMD_ORDER. but got this error message: "Administration header could not be found XXXXXXXXXXX". I tried using the program CRM_ORDER_DELTE, but got the same error message. I tried BAPI: BAPI_LEAD_DELETEMULTI but got the same error message.
I applied the Note: 1087462 and then tried to delete these transactions and still got the same error message. Is there any solution to this problem for CRM 5.0?
Steps for Reconstruction
1. Go to T code: CRMD_ORDER
2. Enter Shift+F5 and enter transaction#: XXXXXXX.
3. In Menu- select "Business Transaction" & "Display/change".
4. Once in change mode go back to Menu and select "Business
Transaction" & "Delete".
5. Click "Yes" on the pop-up.
6. The error msg: "Enter Business partner" should appear - Msg#
CRM_EMAIL320
7. Hit enter, the error msg: "Administration header could not be found
XXXXXXXXXX" appears.

Received response from SAP support partner:
Please verify first if the issue is caused by badi implementation
of ORDER_SAVE badi. Please check method prepare and check_before_save.
Maybe inside your implementation the function crm_order_read is called
but that is not possible in case of deleting a document as document is
not available anymore.
If that doesn't work try this one:
Please check to see if you have a badi ORDER_SAVE method
CHANGE_BEFORE_UPDATE. Please deactiviate the ORDER_SAVE Badi and retestthe deletion.
This is how we resovled our issue - hope this helps someone else:
Check using T Code: SE80 to look for a BADI implementation which used BADI: ORDER_SAVE:
SE80-> Package: Z* (look for custom packages) -> Look under enhancements for any BADI Implementations which have used ORDER_SAVE (double click implementation and in the right pane look under Definition name).
Click 'Change' and deactivate this implementaiton. Now try to delete the CRM transaction. The error msg should not pop up now. Once deletion is completed reactivate this implementation.
This is just a work around. The problem lies in the code and the code within the implementation should be debugged and fixed so that this error message does not come up again.
Edited by: Ramesh Nallabelli on Feb 9, 2009 5:18 PM

Get error message that server could not be found when sending email thru iPhoto

I have established a icloud/mobile me account. Trying to use iphoto to send photos with emails and always get error message that server coule not be found.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

HT1926 I have just updated itunes on my pc (widows XP) to the latest version. When I try to open it i get an error message saying the application failed to start because MSVCR80.dll could not be found. Not sure how to resolve this. Have tried to reinstall

I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

Message "error #1 converting file message="(20)word(ver.xp)could not be found" when converting Word

Similar Messages

Maybe you are looking for