Message error during a transfer order posting

Hi,
in WM, in storage type I set "WM check based on palletization accord to SUT1" now when I post a
transfer order the system replies with the following error message:
Maximum quantity for storage bin A-011 will be exceeded by 1.000,000 KG
I didn't set any max quantity for the storage bin
Best regards

Hi,
no the problem of the maximum quantity still exists

Similar Messages

Printing dunning notices using SMARTFORMS,error during parameter transfer

Hi Friends,
                I face a error message "Include text ZGA_DUN_HDR does not exist (object TEXT, ID ST)" when i run the dunning run.
                I had searched every node for text ZGA_DUN_HDR in the smartform,I didnt find the text in it.
However when I execute the smart form for print preview an error message "Printing dunning notices using SMARTFORMS,error during parameter transfer".This error i believe is due to wrong parameter passing in the fm 'GET_SF_DUNN_DATA'.It raises an error no_parameters_found.All parameters are passed correctly.
                Can you guys help me out.
Edited by: RAJIV KAUSHAL on Nov 14, 2008 6:03 PM

you can create this text ZGA_DUN_HDR in SO10 tcode and try ...

Automatic goods issue for outbound delivery, during the transfer order confirmation

Hello,
Could you please advise how to realize automatic goods issue for outbound delivery, during the transfer order confirmation in the WMS.
Now after creation of outbound delivery, i can't post the goods issue. Before i have to make the transfer order and confrim it and only after this i can post the goods issue in the VL02 t-code.
Could you please advise - what i have to customize that to make automatic GI for outb. delivery (i mean with creation material document) during the TO confrimation.
Thanks in advance.

Hi Iiya
Check the below setting, might be helpful

I keep getting an error message: "Error during synchronisation"

I am using an Intel Mac Mini (Apple) with Leopard OS. I have uninstalled Xmarks and installed Firefox Sync, but
I keep getting the same error message: "Error during synchronisation" !
Please help.
Thank you,
Regards,
Ch. (in Greater Bordeaux, France)

Hi,
Download and run HP Print and Scan utility from link below.
www.hp.com/go/tools
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required

Dear SAP Expert:
I need your help! Recently getting error during data transfer to SAP. I need your suggestion!
I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason?
Please suggest me how to fix that kind of issue.
"com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in ABAP/4 statement when processing an internal table. table.
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
at SAPAdapter.execute(Unknown Source)
at JavaAgent.fillBapiAndWriteBackToNotes(Unknown Source)
at JavaAgent.NotesMain(Unknown Source)
at lotus.domino.AgentBase.runNotes(Unknown Source)
at lotus.domino.NotesThread.run(NotesThread.java:249)
Thanks in advance! Your help would be highly appreciated! Thanks again!

error is clear, check your abap code.

IDVD message, 'Error during formating'

After adding ILIFE'09
I have successfully burned a DVD using Quicktime media , WMV converted to Quicktime and MP4 converted to Quicktime with my IDVD program, however after 4 days of burning, I suddenly received an ERROR message, after the "time remaining" message stated that the program was not burning, but in fact was "writing the Lead- out". The computer spit out my DVD disk and an air message said, " Error problem during the formating".
So I tested DVD media: DVD-R, DVD+R , DVD-RW
I downloaded MPEG Streamclip 1.9.2 to convert my media to DV. files
I checked my Utilities Disk Permissions and choose to archive and install, to get fresh start.
However after all that work, I am still receiving an air message, "Error during the Formating" when I attempt to burn a DVD in IDVD .
So after hundreds of hours trying to solve this issue I am stumped.
I pimped out my computer last year with all the extra memory doo-dads
...however I didn't change my optical disc drive.
Did I burn out my Optical disc drive?

Well, I was right. I burned out the old Optical Drive.
So I went out, purchased a new drive , installed it myself ...then test burned all the different types of raw DVD disks I purchased ...and I'm happy to report they all burned perfectly.
It would have been helpful to have gotten some type of warning from the computer that the optical drive had faltered. This important information would have given me some type of clue as to what the precise issue was and how to proceed.
This is the information age ...hello?

Error during asset transfer: No depr areas for receiving revenue

Hi....
when I am posting an asset transfer transaction [Inter company transfer with transfer method 2: Net method] and simulating, I am getting an error message stating "No Depr areas for receiving the revenue". Kindly help me solve this error.
Thanks
Satya

Hi....
I am posting the transfer from with revenue details as NBV from depr area 01, and using the transfer variant as 2 [Net Method]. Still it gives the same error.
I then try posting a manual revenue and again it shows the same error.
Finally, I use No revenue option, and it accepts. do not why this is happening?
Kindly help.
Thanks

Error in creating Transfer Order

Hi All.
When i try to create a Transfer Order for Inbound Delivery i get the following error. Please anyone can diognize this error???
No items or handling units to be placed in storage could be determined
Message no. L3898
Diagnosis
                                                                                The inbound delivery does not have any items or handling units for
    putaway.
                                                                                The following reasons could be the cause:
                                                                                o   The delivery item is not assigned to the specified warehouse number
                                                                                o   The delivery item is not assigned to the specified plant.
                                                                                o   The putaway status of the delivery item is "not relevant" or
        "completely processed".
                                                                                o   The WM status of the delivery item is "not relevant".
Thanks
Balaji

1)Check the Basic settings like definition,Assignment.
2)Check whether Bin is created online.
3)Check whether intrim bin is created online.
4)Check number ranges for Physical Inventory.
5)Check whether your WM number is assigned to the storsge types.
Regards,
eswarmanu...
Edited by: eswarmanu on Nov 4, 2008 6:37 AM

Error in stock transfer order

Hi everyone,
When I am doing MIGO ,In stock transfer order ,I am getting the following error,
"Excise Invoice cannot be captured for RG1(Finished Goods) material".
What should I do?
Regards
Prabudh

Hi Prabudh,
Can you come again with more details ?
Are you doing STO from Manufacturing plant to selling Plant (Depot) ?
Regards,
Gaurav Raghav.

Error While creating Transfer Order

Hi all......
Im trying to create Transfer Order with ref. to Transfer requirement in LT04, and getting the following error.
"This screen is only allowed for manual transfer orders".
Can any one tel which transaction I hve to use ? And I need User manuals for WM transactions.
Thanks n Regards
Durga

Hello,
May I add something to the discussion.
If you are calling "OMLJ", you see on the left side the secion "Transfer requirements". If the box for "Manual TO creation not allowed" is ticked, you are not able to create the TO's by the manual transactions. Then only the system is allowed to create the TO's, for instance with the report RLAUTA10.
I hope this anweres your question.
Best regards
Uwe Neuman

Error during GI due to posting period

Hi ,
I am getting an error during goods issue which says posting period not open.I guess that we have had deliveries that were created and in process while crossing over from one financial period to another quite frequently before, but we were still able to goods issue them in the next period. Can anyone tell me why this error happens and if there is any work around for this?
Thanks,
Hari.

Hi
Use T.code OMSY to see whether posting periods in MM are open.
Use MMPI--To initialise posting periods in MM
Use MMPV--to close posting periods in MM
Use OB52 to see the open and close Posting periods
make sure that the FI posting periods are in sync with the MM posting periods.
Regards
Aravind
ASSIGN POINTS IF USEFUL

BAPI for MIGO Transfer Order Posting and STO

Hi
I am trying to post a transfer order thru MIGO using BAPI_GOODSMVT_CREATE. But could not able to identify the following fields :
1) Material Slip or Material Document number
2) Final Plant and storage location
3) Destination plant and storage location
4) Movement Type
Also I am trying to create a STO using BAPI_PO_CREATE1 but could not able to identify "Your Reference and Our Reference fields.
Please share your thoughts.

Hi Bakshi ,
see the sample code to pass the material plant storage location nad Movement type..
t_goodsmvt_item-material   = t_zciotr-matnr.          "Materail
t_goodsmvt_item-plant      = w_werks.                  "Plant
t_goodsmvt_item-stge_loc   = w_lgort.                  "Storage Location
t_goodsmvt_item-move_type = w_bwart.               "movement type
t_goodsmvt_item-entry_qnt = t_zciotr-wmeng.
t_goodsmvt_item-orderid    = t_zciotr-aufnr.
t_goodsmvt_item-mvt_ind    = 'F'.
APPEND t_goodsmvt_item.
t_goodsmvt_slno-matdoc_itm = 1.
t_goodsmvt_slno-serialno   = t_zciotr-serialno.
APPEND t_goodsmvt_slno.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      goodsmvt_header       = t_goodsmvt_header
      goodsmvt_code         = t_goodsmvt_code
    IMPORTING
      goodsmvt_headret      = w_docret
      materialdocument      = w_docno
    TABLES
      goodsmvt_item         = t_goodsmvt_item
      goodsmvt_serialnumber = t_goodsmvt_slno
      return                = t_goodsmvt_ret.
Regards,
Prabhudas

CC transfer order = posting as 'sales order' to COPA of sending plant (CC)

Dear all,
we are using cross company transfer orders for tranferring stock from plant A (belonging to CC A) to plant B (belonging to CC B). Therefore the purchaser of B enters a purchase order for vendor A (assigned to plant A in the vendor master data). In the material requirements lists of plant A we see the requirements from this purchase order. Based on the purchase order, a delivery is created for delivering from plant A, followed by an intercompany invoice. The intercompany invoice data are sent to COPA of operating concern A & controlling area A.
Our SCM department (belonging to plant A) does part of the planning based on COPA reports, in which the sales orders to external customers are included. However we would also like to include the requirements (including values) triggered by the purchase orders from B. Does anyone know whether, and how this is possible in standard SAP. Or does anyone have an idea, how we could set this up?
Thanks in advance.
Kind regards,
Mireille Velthuijse

Hi Ankur
It cant happen that copa doc is not posted when PSG is specified in the the settlement rule
As regards Val Strategy, you should assign Val Str 001 to record type C and PV=01
br, Ajay M

Error message: Error During Rendering / Encoding

Greetings,
I have used iDVD in the past without problems on my macbook pro. Now it seems there is no way to make it work! I get this error everytime: "Error During Rendering/Encoding" the error is in the menu/slideshows, but I see that it never gets past the menu item on the list of things it is working on. I have tried going to the older menus and no luck. It says that the burning process has been cancelled. Any ideas?????
Thanks!

Hooray! I got it... I used what you said and this other post (below) helped as well. Is there a way to remove the apple logo from the menu page?
Here is the other post that helped as well:
I was having the same problem yesterday and researched all the solutions in the Forum. I wasn't experiencing the problem with burning to a disc, because I was trying to burn a disc image, so the variable of "better" versus "best" disc wasn't a factor. I did three simple things that I read about, after I tried four times and received the "Multiplexor Error" thing. One, I deleted encoded assets (Advanced > Delete Encoded Assets). Two, I trashed the iDVD preference file (home > library > preferences > com.apple.iDVD.plist), but only after I closed the iDVD application. Three, and maybe this stupid little glitchy thing made a difference, I deleted from the title and scene headings all characters other than letters of the alphabet and numbers. I have a few "&"'s and "/"s in there and maybe a few other little lazy short-cut things. Sort of a Microsoft thing, but maybe that was the trick. So, this morning the Disc Image was created, I've burned several DVD's (Magnavox DVD-R), they work on my Sony Blu-Ray player and all is happyland today.

Error during acquisition transfer: Depr. area does not exist

Hi,
I am getting following error while posting WBS through CJ88
Message no. AAPO107
Diagnosis
According to the specifications for transfer variant 5, depreciation area 30 should be transferred gross. However, the recieving asset 3300053-1 does not manage this depreciation area.
Procedure
Check the transfer variant and the receiving asset.
Can you please help
Thanks

This is probably a question best for the asset section but check the Depreciation areas tab on the asset AS03 and see if it has depreciation area 30.

Message error during a transfer order posting

Similar Messages

Maybe you are looking for