Message filter to mark email as read does not work.

I have set up a message rule to first mark the message read and then move to a folder. Thunderbird moves the message to the correct folder, but it is still marked as unread. I'm using Thunderbird for Windows and I'm using Windows 7. Also, Thunderbird is up to date. Thanks.

I have the same issue!!!
Exchange 2010 SP3 fully patched.
If I read emails one by one, they show up as read on webmail/outlook. But if I use the Edit -> Mark All -> Mark as Read it will still show as unread in webmail/outlook
I wonder if the IOS command that is used to mark all as read is not compatible to Exchange?
-Rich

Similar Messages

For some days imessage does not work, neither on ipad nor on iphone. also email on iphone does not work.

for some days imessage does not work, neither on ipad nor on iphone. also email on iphone does not work.

Hello Redpanda68,
The following article provides information and troubleshooting steps that can help get Messages and Mail working.
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Cheers,
Allen

Mac, have just upgraded to Yosemite and when I shall open Photoshop (CS4), the following message appears: "The licensing of the product does not work" Fault 6 How should I proceed? Have the program installed on only one computer.

Mac, have just upgraded to Yosemite and when I shall open Photoshop (CS4), the following message appears:
"The licensing of the product does not work"
Fault 6
How should I proceed?
Have the program installed on only one computer.

Download the Adobe Licensing Repair Tool.
Run the License Service Update.
Mac OS X 10.7 and above:
a. Double-click the LicenseRecovery111.dmg It will extract the folder. Open the folder.
b. Double-click your Hard Drive.
c. Double-click Applications.
d. Double-click Utilities.
e. Double-click Terminal.
f. Type sudo python
Note: There is a space following “python”. Do not press Return.
g. Drag LicenseRecover.py from the LicenseRecovery111 folder onto the Terminal Window and press Return.
It should look like this:
h. Enter your administrator user name and password when prompted and click OK.
(Note: the cursor will not move and you will not see stars or dots, just enter your password anyway.
i. Let the script run, it will tell you when it is finished. Quit terminal and restart Photoshop
Gene

Finger print reader does not work

i followed the directions and my print was scanned, rescanned,and the edges were scanned and accepted but the reader does not react when the phone is locked....i deleated and rescanned and followed all directions which accepted my finger print....once again thereader does not unlock the phone...any suggestions?

I looked for software and found a suggestion which I down loaded. Now the finger print reader does not work either on Internet Explorer or on Firefox. So I had to do a reset to an early time to get rid of that soft ware. We are back to where I started, with the finger print reader working fine on Explorer 11 and it does not work at all on FireFox. There must be some work around, has this not occurred with other folks.

Adobe Reader does not work-how to use adobe reader on Lion

I was trying to print an international label on eBay via Adobe Reader, and was very dissapointed and shocked that it does not work on Lion.
I was so happy that I figured out how to use adobe reader on Lion, and hope I can help anyone else who is frusterated too.
Step 1. Download Google Chrome
Step 2. Printe your international label, or whatever you need to do that uses Adobe Reader

Thanks Shelly! I too was having trouble and thought it was something wrong with my Mac. I still have a big though. When I try to print the saved pdf file, I get a pop-up that says "The document could not be printed. There are no selected pages to print" even though I am looking at the complete doc. It's there and in my print prompt "all pages" are selected to print. The way I got around this, is by emailing the pdf file to a gmail address and viewing the attachment via Google Docs. It loads perfectly and prints without a problem.
Carla

ADOBE LiveCycle Designer 8 - EMAIL SUBMIT BUTTON DOES NOT WORK

I created a new form in Adobe LiveCycle Designer 8, but the email submit button, nor a regular button assigned with a 'submit' function will do anything. It should initiate a new Outlook email but it does not. My default programs are set correctly (default email program and the default "mailto" program are set to Outlook). This document was created not only with ALC8, but on a Windows Vista PC with MS Office 2007. I ran a test to see if it would work on a WinXP SP2 machine with Office 2003 and it still did not work.
Can anyone help?

Alan
Though not an expert, I've created a few forms with the Submit by Email button. If you've already done this then sorry for asking, but did you go through the Acrobat Distribution (Forms>Distribute Forms)process after creating the form in LC8? As far as I can tell the email submit button doesn't work without this stage.
This confirms the email submission address, then sets up a dataset to be saved in a location of your choice.
filename_dataset_0001.pdf
then a file type that can be edited, saved and submitted by Reader users:
filename_pub_0001.pdf
You can save this to your intranet server or email direct to the recipient.
When the submit button is then used you receive a copy of the whole form which on opening will prompt you to add it to the dataset. Receiving and adding multiple forms to the data set is straightforward. You will see them all listed in the viewer above the form itself. From here you can also then select and export the data to Excel via xml or as a csv file.
Note that any changes you make to the form should be to the original document and the distribution process repeated, otherwise the functionality of the form will be affected.
That's about the limit of my knowledge I'm afraid, therefore if you have already tried this and are still having problems then hopefully someone else can help out.
Regards

I can't boot windows in my iMac late 2011 as my internal cd reader does not work

i can't boot windows in my iMac late 2011 as my internal cd reader does not work

Which copy or version of Windows? and how where was it purchased?
my window installed itself perfectly on another computer.
One copy and you want to activate on two computers?
With 16GB, it will try to create 16GB hibernation file, 24GB page file, and need 20-30GB for the OS, plus room for temp, cache, applications, 9GB just temp to install SP1 update(s).
did you create 80GB or larger partition?
also, some macs with ssd + hard drive have issues, and of course you need Windows 7 64-bit home premium (Pro to use more).
OWC has up to 32GB, not cheap.
http://eshop.macsales.com/shop/memory/iMac/2010/DDR3_21.5_27
Crucial is usally very helpful, try email cs.

I cannot access my Apple ID after I made changes reset password m does not send to my email and birthday does not work,

after changes to to my Apple ID I can no longer log in or reset. The reset does not go to my email and the birthday option does not work. How do I access Or install a new I'd without accessing the old password?

If you have this product,
http://www.symantec.com/business/support/index?page=content&id=TECH165159
you have to go back to Snow Leopard.
To re-install SL, back up your home directory, format and re-install.

Samsung galaxy s3 - updated to KK. Now email on phone does not work. Email worked perfectly prior to s/w update. What do i need to do to get email to function again?

samsung galaxy s3 - updated to KK yesterday. Now email on phone does not receive messages. Email worked perfectly prior to s/w update. Have turned sync on and off - no change. Nothing has changed w/ email settings either. What needs to be done to get email to function properly again?

raadga Emails are important! Let's get your Comcast account working again. Go to the email account then select the menu for settings. If "sync only over wifi" is on then uncheck the box. If this is not an option, then you would want to delete and readd the email account to the phone. Please keep us posted.
Sheritah_vzw
Follow us on Twitter
@VZWSupport

Fingerprint Reader does not work under Win 7

I have a T500 which I have just upgraded from Windows Vista Business to Windows 7 Professional.
Everything apart from the Fingerprint Reader and the Wireless Broadband seems to work.
The Fingerprint Reader is the Authentec AES2810, with driver version 2.0.0.18 dated 24/11/2009.
If I run the Lenovo Fingerprint software version 3.3.0.58 I get the error that the software cannot
communicate with the sensor.
The Wireless Broadband card is the Ericsson F3507g. The follwing drivers are installed:
Network adapters:
- F3507g Mobile Broadband Driver, version: 1.0.0.52 dated 29/07/2009
Ports (COM & LPT):
    - Ericsson F3507g Mobile Broadband Minicard GPS Port (COM6), version: 1.0.0.28 dated 29/09/2008
    - Ericsson F3507g Mobile Broadband Device Management (COM4), version: 4.54.7103.1 dated 26/06/2009
Smart card readers:
    - F3507g Mobile Broadband USIM Port, version 6.0.0.7 dated 12/05/2009
       Even if there is the driver information indicated above the USIM device says:
"No drivers installed for this device."
Universal Serial Bus controllers:
     - F3507g Mobile Broadband Device, version: 4.54.7103.1 dated 26/06/2009
If I use the ThinkVantage Access Connections software I get the following error message:
"The current wireless WAN connection is being managed by another client utility.
Close the client utility and try again." But to my knowledge no other Wireless Broadband client is running.
If I try Mobile Broadband Connect via the Vodaphone UK interface I get the following error message:
"No Wireless Mobile Broadband device found."
And finally if I try ThinkVantage GPS I get the folowing message:
"The GPS NMEA CPM port is not available. You need to check the following things.
- Another GPS application is using the COM port.
- COM port is disabled. You can enable the COM port in Device Manager."
Under Windows Vista both the Fingerprint Reader and the Wireless Broadband device worked without
any problems. Do anybody have any ideas on how I can resolve these two problems.
Best regards,
Frode
Solved!
Go to Solution.

Yes, it is the driver that seems to be the problem. Here is how I proceeded. Before I started to removed the Lenovo software and the driver I first made sure the the automatic driver installation was turned off. The easiest way to do this is to type "change device installation settings" in the Start Menu search box. A window then pops up with the question: "Do you want Windows to download driver software and realistic icons for your devices?". By default this is usually set at "Yes, do this automatically". Instead select the option "No, let me choose what to do", which will bring up another menu where one select the last option: "Never install driver software from Windows Update."
After you have installed the new driver do not forget to put it back to the recommended automatic mode.
I first went to Control Panel - Uninstall Programs and uninstalled the Lenovo Fingerprint Software. I then went to the Device Manager and uninstalled the AuthenTec driver version 2.0.0.18 and checked the box delete this driver software. I then rebooted the PC and during pre-boot went into the BIOS, selected Security and Fingerprint Reader and made a reset on the reader. After reboot I reinstalled the Lenovo Fingerprint Software 3.3.0.58 (7wf160ww). This time the installation went through without any error messages but when I started the software I discovered that it still did not work. When trying to run the tutorial or to enroll fingerprints I got the old error message: "Cannot communicate with sensor. Please confirm the sensor is ready."
I then checked the driver and I found that I now had the older AuthenTec driver version 8.1.2.56 dated 07/07/2009 and everything looked OK from the driver point of view. I then suddenly remembered that I had forgot to uninstall the AuthenTec TrueSuite software. I immediately uninstalled the TrueSuite software and also yet again the Lenovo Fingerprint Software, but left the newly installed driver in place. After a reboot I again reinstalled the Lenovo Fingerprint software and this time it worked. I can now run the tutorial and enroll fingerprints and the fingerprints work 100% for the Windows login. I have not yet tried to install Lenovo Client Security. I will do that later. However, I have discovered that the AuthenTec TrueSuite software has not been reinstalled after doing the last Lenovo Fingerprint software reinstallation. I am not sure if this is a good or a bad sign. Perhaps Bananaman or Cleo_Lenovo can give me some feedback on this issue.
I thank you all for helping me out with this problem. I find the Lenovo Forums of great interest and usefulness.
Cheers,
Frode

HP SimplePass Reader Does not Work after Sleep

I have only had my laptop for a week - the fingerprint reader stopped working 2 days after I bought it. I have tried everything: removing and re-installing various drivers and software, stopping and starting Credentials Manager, unchecking the box that allows the computer to turn the reader off to save power, etc.
I have gotten it to the point where it functions when the computer is logged in, but not after sleep. It works once if you restart the computer, but after waking it from sleep it does not initialize. (no light or anything) However, if you "lock" the desktop from the start menu, the reader will log it in again. (without closing the lid or putting it to sleep)
Simple Pass version 6.0 (latest downloaded from HP.com)
Envy Dv6 7229wm
Windows 8 64-bit
Thanks

Hello hawvi,
I see that you are having problems with the fingerprint reader not working after returning from sleep mode. I would like to help with this issue but I need some information.
Can you provide the full model and product number of the computer? Here is a link that shows how to find that information.
What operating system are you using?
How long have you had the problem?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

SanDisk USB 3.0 Card Reader does not work with OSX Mavericks.

Since updating to OSX Mavericks (10.9) My USB 3.0 SanDisk "ImageMate All-in-One" Card Reader has begun to fail.
It all seems to work proper at first. The memory card shows up in finder and I'm able to browse the files. But when I try to transfer any files it un-mounts from finder and only transfers the first file.
This does not happen under previous OSX versions. I have tried on other computers since, so the card reader is fine.
My USB 2.0 card reader saved my life this time. It works totally fine.
Is this a known problem? Are you guys working on it?

Solved in this post here:
https://discussions.apple.com/message/24016337#24016337

Email Setup Application Does Not Work After Update

I seem to be having the same problem as others with the email setup application.
When I updated my Blackberry to the new OS6, I went to my email setup and it said "looking for updates"
It finds a new update from my already installed email setup app 6.0.0 to the new 6.11.0419.0755.
When I click "download" it says replace existing version? I click "yes"
The it says: "com.rim.bis.client" contains a different version of module "net_rim_bis_client" which is also used by email setup application. If you proceed, "email setup application" may cease to function properly. proceed?
If I click "yes proceed" it crashes my blackberry and it will not reboot and I have to do a complete hard reboot, wipe the device and reload everything from my backup on blackberry desktop.
If I click "no" not to proceed, I cannot open the email setup application.
I have tried downgrading to version 5 of the OS, I have rebooted with a battery pull, crashed my blackberry twice and spent hours reloading all my applications and systems. I am at the end of my rope, and I don't know what else to do?!
If there was a way to turn off the automatic search for updates on my device under the setup and email settings, i think I would be able to set it up in the older version 6.0.0
HELP.

yep same problem here
i had this problem and got a replacement handset.
i have had to do an update and got the same issue yet again.
The funny thing is, is when i got my new handset i had to run the email setup application and it worked fine.
now its failed and i have to boot in safe mode and wipe etc.
Will someone sort this out???!! O2, Blackberry whoever. Shambles!

Batch reading does not work

Hello,
I have class A, attribute List < B > A.b, B.d (back reference, mapped variable one to one). I want to use batch reading A.b. Sometimes it works, sometimes not.
It is because of this method in VariableOneToOneMapping:
    public Object valueFromObject(Object object, DatabaseField field, Session session) {
        // First check if the value can be obtained from the value holder's row.
        DatabaseRow referenceRow = getIndirectionPolicy().extractReferenceRow(getAttributeValueFromObject(object));
        if (referenceRow != null) {
            Object value = referenceRow.get(field);
            // Must ensure the classification to get a cache hit.
            try {
                value = session.getDatasourcePlatform().convertObject(value, getFieldClassification(field));
            } catch (ConversionException e) {
                throw ConversionException.couldNotBeConverted(this, getDescriptor(), e);
            return value;
        //2.5.1.6 PWK. added to support batch reading on variable one to ones
        Object referenceObject = getRealAttributeValueFromObject(object, session);
        String queryKeyName = (String)getSourceToTargetQueryKeyNames().get(field);
        Descriptor objectDescriptor = session.getDescriptor(referenceObject.getClass());
        DatabaseField targetField = objectDescriptor.getObjectBuilder().getTargetFieldForQueryKeyName(queryKeyName);
        if (targetField == null) {
            return null;
        return objectDescriptor.getObjectBuilder().extractValueFromObjectForField(referenceObject, targetField, session);
    }When B.d is instantiated, referenceRow is null. getSourceToTargetQueryKeyNames() does not contain an entry for indicator field, so the method returns null. How can I fix it?

If the field equals the mapping's indicator field it should do a lookup in its indicator mapping with the object's class for the value. Please log this bug.
-- James : http://www.eclipselink.org

I want to upgrade my PowerMac G5 from 10.3.9 to 10.4, but my DVD reader does not work. Where can I download 10.4?

I want to upgrade my PowerMc G5 from 10.3.9 to 10.4, but my DVD reader no longer works-- so I cannot use an upgrade DVD to do this. Is there a site where I can download and upgrade to OS X 10.4?

$33 option...
http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_powerma c_g5.html

Message filter to mark email as read does not work.

Similar Messages

Maybe you are looking for