Message for Material Document Generated

Hello Friends,
On creation of Production Order, we do picking of components thru CO27. After completion of this Pick, though goods movements ( mvt type 261 ) are successful we are not able to see the message stating material document number in status bar ( left bottom part of the screen ) as we get it in other cases/transactions. Are we missing any parameter settings pertaining to these kind of messages and T-code CO27. Kindly advice.
Regards
mahesh

Dear Ram
you are right. Since it is a mass transaction, it does create multiple documents ( probably my user never exploited the potential of this transaction and used it for single order only ). I tried it for multiple orders (3 Nos ) and results were as expected ( 2 documents got created ). But I didn't understand the system's logic of material document creation here, as it is observed that for one component it has created only one document for 3 different orders ( same batch nos) where as for other component it has created 2 documents for 2 different orders even though batch nos are same. All the components are consumed from same Storage location. I checked and compared both the documents but didn't find anything noticable. Any idea, what it could be?
regards
mahesh
P.S. : Mangal, Thanks for your inputs too.

Similar Messages

Link Material Document generated for material movement due to production

Hello Expert,
I am creating a zreport for Material Consumption during Production. I am assuming Confirmation entry in PP module as a base of this report and linking to Material Movement data in MM Module. But I am not able to link this data from tables.
Can you pls guide me how to link Material Document generated for material movement due to production confirmation entry and actual production confirmation entry.
Thanks
Shailendra

Hi Shilendra ,
You can create a report with the logic. That all the materials which are created due to backflushing confirmation are created with movement type 131 and the component material are consumed by movement type 261.So you can create the report with this logic.
Dont forget to award Points if it helps.
Lekhram

Output Message Setup for Material Document

Hi,
Can you guide me on setting the default output message for 101 Documents.
Regards
Shankar

Hi,
PRINT OUT OF MATERIAL DOCUMENT :
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensured in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. In MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.(Condition records)
8. While doing MIGO, ensured that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
Now go to MB90 entered the output type as WE01, Tr m as 1, Sort or. 01, Pro.mode as 01, and executed. Sytem outputted all the material documents that has to be taken print out.
Regards,
Shailesh Mackwan

Capture Excise Invoice for material document created against a PGR

Hi SD Gurus,
We have a scenario of reverse subcontracting where we have to receive raw material from vendor, process it and then dispatch the finished goods to the vendor or the vendor's customer.
For receiving the raw materials, i have created a document type which is copied from standard RE type. Against this order, a returns delivery is created which is then PGR-ed. With reference to the previous document, a service order is created in SD, which is then billed.
But i am facing a problem when i tried to capture the incoming excise invoice for the raw materials. When i tried to capture the excise against the material document generated for PGR, the system is throwing a error, that it cannot capture the excise for this materia document type.
I would be greatly obliged if anyone can throw some light on this. Do i need to maintain any special configuration for this? Why is SAP not allowing it? How this can be done?
With Regards,
Arindam Datta.

Dear Arun R,
You Kindly go to the following path and maintain your movement type over their and do the MIGO.I am very sure at the time ot migo excise tab will come for part-1 updation and subsequently you capture part-2 on J1IEX.
SPRO->LG->Tax on Goods Movemet->India->Business Transactions->Incoming Excise Invoice->Specify which movement type involve excise Invoices.
Hope this will help you out.
Regards
AKS

OMX4 - FBN1 - Number range for Material document and FI document

47 - is for FI document number range in Material ledger FBN1. OMX4 gives number range for Material document. My question is how big the number range must be? Since thousands of Materials involved, I couldn't imagin this?
Anybody knows, how to determine the size of no. ranges in Material Ledger configuration? SAP simply says, check no. ranges whether it meets the requirement....
I don't expect an answer again, just check your business, how many transactions would be in a period, which is not quantifiable now?
I would like to understand this from somebody's experience of using insufficient or excessive no. ranges, especially in this area.
Cheers,
Ashok

What is the number range you are using? Year Dependent or Independent?
When you don't know the document number consumption pattern you should use Year dependent number range in both OMX4 & FBN1. Observing this for a month will give a rough Idea and observing for a Quarter will give you a fair Idea and the result for a year gives almost near to accurate consumption of number ranges.
The generation of documents is dependent on the number of materials and Profit centers involved. As much as possibe use Summarization at profit center level when posting to FI. This will reduce the number of documents and line items that are getting generated.

No Material Document Generate

Dear Sir's,
I have done the confirmation against production order and confirmation has been done and co14 report shows the confirmation of all the operation and Insfection lot generated and goods movement against that production order but no material document generated against this.
And also confirmation has not been reversed and stock do not shows any where.
Please suggest.
Thanks & Regards
Ajit
Edited by: Sharma.Ajit on Feb 18, 2010 6:27 AM

Dear Sharma,
1) what is the status of order whether PDLV or DLV
2) in CO14 have you recognised any Component high lighted in Bue colour
3) just check in COOIS, whether 261 & 101 movments found for that order
4) Just check in COGI if there are any error records, i suspect you can find the records in COGI
5) if found post them in COGI
Then check the result
Regards
Madhu

Inbound Idoc for material document cancellation

Hello,
Could you update me whether there is any Inbound Idoc type available for material document cancellation (like t.code MBST). I found message type MGBMCR, but it's only allowing me to create the material document like GRs but not cancellations.
/Mallik

To my knowledge, there is no such IDoc. Cancellation is an exceptional situation and should be treated as such. If one needs an IDoc interface for cancellations, I'd have to say there is something very wrong with the business process.

Need an IDOC EDI STEPS for material document(MB03)

HI ALL,
i need an IDOC for material document. For example, user in SAP make material document (t-code MIGO or MB11), then automatical is downloading outbound IDOC, which contain information about material document.HOW TO PROCESS IT THROUGH EDI .GIVE THE STEPS.

like below you can do your settings
The EDI Configuration required to be done for Transfering IDoc to non SAP System is.
1. First of all, we need to identify the Transaction Data which is required to be Transfered to external System.(Ex: Sales Order Data or Shipment Data or Delivery Related Data).
2. Secondly, Identify the IDoc Type & Message Type. IDoc Type can be found in Transaction WE30 & Message Type Can be explored in Transaction WE81.
3. After that, assign the IDoc Type to Message Type in WE82.
4. Identify the Selection Program (Outbound) which is generally a Function Module in the Form of IDOC_OUTPUT_<Message Type>. Example, if the Message Type is ORDERS, the FM will be IDOC_OUTPUT_ORDERS.
5. Assign the Function Module to a Process Code in WE41 (Process Code for Outbound).
6. Configure Port Definitions in WE21 for which the RFC destinations are to be maintained in Transaction SM59.
7. Maintain Partner Profiles for the Outbound Message Processing in WE20.
8. Last, but not the Least, we need to Focus Mainly on Message Control Configuration which is nothing but maintaining the Output Type for the Outbound IDoc to be Triggered for the Sales Order Application or Delivery Application.
i. In Message Control Configuration, we'll maintain
a. Condition Tables
b. Access Sequences
c. Output Types
ii. To Create the above elements, we can go to SPRO Transaction and do the same depending on the Application Area such as Sales / Shipping / Logistics Execution etc.
iii. For Output Types & Access Sequences, we can go to the Transaction NACE or VK01 in which we'll maintain the Output Types / Access Sequences & Condition Records.
Please note that all the above steps may not be needed if we are using some of the Standard Elements provided by SAP such as Message Type, Process Code, IDoc Type & Selection Program as many of the Standard SAP Applications have their own Elements for different Application Areas.
For example, if you want to send an Order Confirmation IDoc when the Sales Order is saved, you can use the Message Type ORDRSP, IDoc Type ORDERS05 & Selection Program as IDOC_OUTPUT_ORDRSP.
However, Message Control Configuration is the Key Factor and is required for all the Applications as per the Customer's / Client's Requirements.

How to prevent error message for material description in MDG material detail screen, when user click on check action

Dear Experts,
I have a requirement for making material description as non mandetory in change request view of mdg material screen.
I have done that using field usage in get data method of feeder classes, but still message is displaying.
This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
How to prevent error message for material description in MDG material detail screen, when user click on check action.
Thanks
Sukumar

Hello Sukumar
In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
Regards, Ingo Bruß

Create transfer order for material document - 4.6C system

Hi Gurus
Can any one provide me the function module or BAPI to create transfer for material document in 4.6c system. I have to give input as supply storage type and bin and destination storage type and bin while execting the function module.
Thank you in advance
Regards
Sarath

Sarath,
Thanks for responding, I finally found my answere via Thread: create transfer order for material document - 4.6C system
Thanks again.

Need you help to update business area for FI Document generated at migo

HI guys
I am looking for MIGO Badi or user-exit which will help update business area which is mandatory field but when movement type 101and the account assignment tab is not there when the movement type is 101 at the time of GR so i want to update it BA in for FI Document generate in background so as to complete the GR.
Thanks

Hi Niraj ,
I Have check the badi but there is no structure of FI item data generated for which i can insert the BA for the line item generated
Thanks
Regards
Nilesh

Reading Additional info for Material Document (Movement Types 313, 201)

Hi SAP Gurus,
I am currently working on a requirement for Material Document Interface.
The Requirement is as below:
(1) The user creates/modifies a material document using MB01/MB03/MIGO for movement types 313 and 201 separately.
(2) The user maintains additional information by creating a NOTE using the option
SERVICES FOR OBJECT --> CREATE NOTE.
(3) To Print the materail document information.
The Approach is followed is:
1) I have to retrieve the Address for From and To Locations respectively along with document data and display it as Simple List output.
Approach:
I retrieved the data from MKPF and MSEG tables respectively.
Also retrieved the data for FROM and TO locations using table TWLAD and function module ADDR_GET.
(2) I also need to retreive additional information created by the user using the option SERVICES FOR OBJECT --> CREATE NOTE.
Approach:
Request your guidance and inputs to solve the point (2) mentioned above.
I have debugged the SAP Standard tcode MB01, MB03 ,MIGO which have the option SERVICES FOR OBJECT --> CREATE NOTE.
I have also used ST05 to trace the transaction to get a proper solution.
But, i was able to observe that only a table SOOD provides the initial required info only which points to a office document type.
Looking forward to your valuable inputs, so that i can retrieve the data entered using the option SERVICES FOR OBJECT --> CREATE NOTE.
Thanks in advance for spending time and
guiding me to deliver the development on time.
With best regards,
Sudhakar

Hi,
Try this..
TABLES: MSEG.
PARAMETERS: P_DATE LIKE MKPF-BUDAT.
SELECT-OPTIONS SO_BWART FOR MSEG-BWART.
SELECT-OPTIONS SO_MATNR FOR MSEG-MATNR.
DATA: BEGIN OF ITAB OCCURS 0,
 MBLNR LIKE MKPF-MBLNR,
 GJAHR LIKE MKPF-MJAHR,
 MATNR LIKE MSEG-MATNR,
 MENGE LIKE MSEG-MENGE,
 MEINS LIKE MSEG-MEINS,
 END OF ITAB.
SELECT AMBLNR AMJAHR BMATNR BMENGE B~MEINS
 INTO TABLE ITAB
 FROM MKPF AS A INNER JOIN MSEG AS B
 ON AMBLNR = BMBLNR AND
 AMJAHR = BMJAHR
 WHERE A~BUDAT = P_DATE
 AND B~BWART IN SO_BWART
 AND B~MATNR IN SO_MATNR
 AND B~MENGU = 'X'.
The field MENGU might be used to check if the
material movement has affected the stock..
Also I have used posting date = given date in P_DATE..
LOOP AT ITAB.
 WRITE: / ITAB-MBLNR,
 ITAB-GJAHR,
 ITAB-MATNR,
 ITAB-MENGE,
 ITAB-MEINS.
ENDLOOP.
Thanks,
Naren

Number range for material documents

Hi SAP Gurus,
Can anyone please advise if we can reset number range for material documents once it reached to last number for existing number range ?
Thanks & Regards,
Manoj

Hi,
If material numbering reached to last number for existing number range, you can create Number Range Text Group and assign to your material type in following path
IMG -> Logistic ->General -> Material Master ->Basic Settings ->Material Type ->Define Number Range for each Material Type
OR
T.code:MMNR
Lets example you have now:
Number Range Text Group:01
From Number:     1
To Number     :19999999
Now you can create Now One Number Range Text Group
Number Range Text Group:02
From Number:20000000
To Number     :29999999
Now assign Number Range Text Group to your material type in MMNR , {{by clicking group in menu, select maintaion->group->insert
Number Range Text Group:02
From Number:20000000
To Number     :29999999
and save}}.
Regards,
Biju K

How to setup number range for Material Documents created by goods movement

Hi Experts,
Good day!
Would you know what table or transaction code we could setup or configure the number range for Material Documents number created by goods movement?
Thanks. Have a wonderful day!
Rockz

Hi,
Tcode - OMBT
Regards,
Vivek

BAPI to create output messages in material document?

Our stores manager has a list of material documents which require a repeat output. There are far too many for someone to manually go into each document and create a new message in the output options.
Is there a BAPI or transaction which can be used to create output messages for multiple MIGO material documents?
The ones required in this case are WE03 output messages.
Many thanks
Karen

Sorry, I should have said that the original documents were printed as WE01 outputs when they should have been WE03. We need to create new messages with WE03 as the type not WE01. Therefore it is not just a repeat output.
Therefore I don't think we can use MB90. Also it doesn't appear to let you enter multiple material documents.
Does anyone else have any ideas.
Thank you
Karen

Message for Material Document Generated

Similar Messages

Maybe you are looking for