Message from my time capsule"tHE BACKUP DISK IMAGE"/VOLUMES/DATA/BOB MERTIE'S IMAC SPARCE BUNDLE"CANNOT BE ACCESSED". ANY IDEAS? THANKYOU

Message from my time capsule"The backup disk image"/volumes/data/bob mertie's imacsparse bundle could not be accessed" Any help?

Welcome to Apple Support Communities
There are different reasons for that error. Read > http://pondini.org/TM/C17.html

Similar Messages

Time Machine couldn't complete the backup to "Time Capsule".The backup disk image "/Volumes/Data-1/Macintosh.sparsebundle" is already in use.

When I back up my macbook pro to time capsule 3TB, this appears:
"Time Machine couldn’t complete the backup to “Time Capsule”.The backup disk image “/Volumes/Data-1/Macintosh.sparsebundle” is already in use."
and I'm not able to back up. What do I do?

As noted in the link I posted, that's fine if you're the only user logged-on to the only Mac using the TC's disks (internal and/or USB externals). If not, that may corrupt other data being written, especially other backups.

HT3275 The backup disk image "/Volumes/Data/Richard Teixeira's iMac.sparsebundle" could not be accessed (error -1).

Installed another new Time Capusle, # Terabytes. Shut off wireless only connected to time capusle by cat. 5 cabel and to correct port . But darn sparsbundle error has surfaced. Had Apple support have me redo the entire back up which worked but after two days of working correctly this occurred again.
Thoughts?

Thought I would update this myself. I bought the new 3 T erabyte product and after removing the western digital software for my extra back up disk for photos it worked. Key is do not run the smartware from western digital not needed in the mac environment and a problem when running the Time Capsule. So likely my previous 2 Terabyte Time capsule was not the issue. I think the smartware software took time to be known as an issue since I had contacted apple twice before and only on the third time did someone suggest looking at this. Welcome to the evolving world of technology.

The time machine could not complete backup.The backup disk image "/Volumes/Data/onkar dhillon's iMac.sparsebundle" could not be accessed (error -1).

Having difficulty backing onto my time capsulse and keep getting this error message.
Can anyone Help please??

Please visit Pondini's Time Machine FAQ for help with all things Time Machine.

I'm receiving an error message that reads "The backup disk image '/Volumes/Data/my name's iMAC.sparesebundle" is already in use. The time capsule is not backing up any files.

I'm receiving this error message about my Time Capsule:
"The backup disk image '/Volumes/Data/my name's iMAC.sparesebundle" is already in use. The time capsule is not backing up any files.

1. Open the Sharing preference pane and check that the computer name hasn't changed without your knowledge. For example, if the name was "X's iMac," it might now be "X's iMac (2)". In that case, restore the original name. You may have to click the lock icon in the lower left corner of the preference pane to unlock the settings. Test. If there's no improvement, or if the name had not been changed, continue.
2. If you're backing up to a Time Capsule, or an AirDisk attached to a 2013 or later model AirPort Extreme base station, restart it in either of the following ways:
☞ Disconnect and reconnect the power adapter.
☞ Select the device in the AirPort Utility application and then select
Base Station ▹ Restart
from the menu bar.
If AirPort Utility notifies you of a firmware update, install it.

Time machine The backup disk image "/Volumes/Data/Freedom Book.sparsebundle" is already in use.

I am getting the following error message from Time Machine (backing up to my 3 TB Time Capsule):
The backup disk image “/Volumes/Data/Freedom Book.sparsebundle” is already in use.
I have no idea why this would be in use, because only one MBP has the name "Freedom Book". Any advice on how to resolve? Running Mountaiin Lion 10.8.1.

I had the same error. I unplugged my TimeCapsule for 5 min from power. Plugged it back in to power then waited 10 min for everything to comunicate again. Clicked on backup now and it worked. Must have froze up or something.

HT3275 I'm receiving an error message that reads "The backup disk image '/Volumes/Data/my name's iMAC.sparesebundle" is already in use. The time capsule is not backing up any files.

The Time Machine is not completing thte backup to my Time Capsule. I am receiving a message which reads "The backup disk image "/Volumes/Data/Mac Jet's iMAC.sparsebundle" is already in use." I cannot locate the source of the problem or what steps need to be taken to get the Time Capsule operating.

Hi, see if it shows here...
In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474

HT3275 I recently bought a new Time Capsule and the following message is shown:- "Time Machine could not complete the back up. The backup disk image "/Volumes/Data-1/Brian's iMac.sparsebundle" is already in use." Can anyone help?

I recently bought a new Time Capsule and the following message has started to show:-
"Time Machine could not complete the back up. The backup disk image “/Volumes/Data-1/Brian’s iMac.sparsebundle” is already in use."
Can anyone help?

Pondini is the resident Time Machine expert on the forums, and he has all the answers.
Check is excellent Time Machine - Troubleshooting support document
http://pondini.org/TM/Troubleshooting.html
See # C17 in particular

HT3275 I received this message and I'm unsure how to fix it "Time Machine couldn't complete backup to Time Capsule the backup disk image"/Volumes/The Vision Board/Alex Parry.sparsebundle" is already in use

I received this message and I'm unsure how to fix it "Time Machine couldn't complete backup to Time Capsule the backup disk image“/Volumes/The Vision Board/Alex Parry.sparsebundle” is already in use

Look at the more like this on the right column of the web page.
This is the most common error here.. we answer it 5-10times every day.
Simple method.. pull out the TC power cord .. count to 10.. plug in the TC power cord.
Look at the other references for more info.

I keep getting this error when trying to backup time capsule with time machine. The backup disk image "/Volumes/Data-1/Dan's iMac.sparsebundle" is already in use.

I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.

Make sure that no other Macs are backing up at the time.
Pull the power cable from the back of the Time Capsule
Count to ten
Plug the power cable back into the back of the Tme Capsule
Wait a few minutes, then try a backup again.

HT3275 I get message Time Machine couldn't complete the backup to MybookLive The backup disk image Volumes/TimeMachine RobertFurlong's Computer(2).sparsebundle is already in use.Any ideas?.

I get message Time Machine couldn't complete the backup to MybookLive The backup disk image Volumes/TimeMachine RobertFurlong's Computer(2).sparsebundle is already in use.Any ideas?.

I have experienced the same problem on a MB Pro 2011 and a 2013 MBAir both with updated OS's. OSX10.9.3. WD MYBookLIVE 3Tbyte. I have found the only solution is to reboot the WD device thru Western Digital's software that you can access via the IP address for the WD device. For example, if you type the WD backup device's IP, like ... "125.261.1.38 " in the Safari address bar, WD has built-in software the runs a program that allows you access to the WD unit to maintain it, turn it off, reboot it, partition it, etc.
Doing this, I believe disconnects or ?dismounts? the WD from TM and resets everything. It works most times, not always, Sometimes you need to reboot the Mac too.
I'm more interested in what is causing this frequent failure on the WD. It happens to me several times per week. I suspect, network failures or improper disconnections between WD and the Mac (not caused but the user) are the culprit but I haven't seen any blogs on a permanent fix. Spent hours on the phone with WD techs; they were clueless. I found the "fix" myself.
Further, I often get an associated reply to "dismount the WD" with the "sparse bundle.XXX is in use" error. But when I go to Finder or Disk Management to find out what's mounted on the Mac, the WD is never mounted, even when the TM backup is working properly. I find the WD device under SHARED in Finder. Its never mounted, so I can't dismount it.

Time machine: I get the following message: The backup disk image "/Volumes/Data-1/Clemens's iMac.sparsebundle" is already in use - what to do? Where and how do I find that file and get rid of it?

time machine: I get the following message: The backup disk image “/Volumes/Data-1/Clemens’s iMac.sparsebundle” is already in use - what to do? Where and how do I find that file and get rid of it?

I'm on Mountain Lion and have version 6.1 of AirPort utility so there is no button to "Disconnect All Users"and the only other option of "removing and re-selecting the drive via Time Machine Prefs" doesn't work either. So this will work.
Launch Airport Utility and select the TC "Edit" button, then select the Disks tab. Deselect "Enable File Sharing" and click "Update". The TC will reboot then follow the same procedure and reselect "Enable File Sharing" and click "Update". After TC reboots again you'll be up and running. Not the neatest way to do it but saves having to unplug the TC which risks disk damage and the whole procedure takes less than a minute.The "Enable File Sharing" button seems to have replaced the "Disconnect All Users" button but with the slight disadvantage that it reboots the TC which takes up additional time.

Here is the message I got from the red "i" message... please help.The backup disk image "/Volumes/Data/Lisa's MacBook Pro.sparsebundle" is already in use.

Here is the message I got from the red "i" message... please help.The backup disk image “/Volumes/Data/Lisa’s MacBook Pro.sparsebundle” is already in use.

http://pondini.org/TM/C12.html

I have two Macs that won't back up to time capsule, says The backup disk image "/Volumes/Data/Douglas Chalmers's iMac.sparsebundle" is already in use.

I have two Macs that won't back up to time capsule, says The backup disk image “/Volumes/Data/Douglas Chalmers’s iMac.sparsebundle” is already in use.

Please look over to the right of this page for the heading of More Like This.
There are multiple answers and solutions there.

How to solve: The backup disk image "/Volumes/Data/IP's Mac mini.sparsebundle" could not be accessed (error -1).

Hi,
Please help!
I set up my time capsule yesterday, and it worked perfectly initially. However, after I used the same time capsule HDD as network file sharing with my MacBook Pro and two other PCs, than the hourly backup failed and gave the following error message.
The backup disk image “/Volumes/Data/IP’s Mac mini.sparsebundle” could not be accessed (error -1).
Please help telling me what to do to restore the backup function.
ipmt

First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
 ▹ System Preferences ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

Message from my time capsule"tHE BACKUP DISK IMAGE"/VOLUMES/DATA/BOB MERTIE'S IMAC SPARCE BUNDLE"CANNOT BE ACCESSED". ANY IDEAS? THANKYOU

Similar Messages

Maybe you are looking for