Message from WS are not reaching target

Hi,
Soap - RFC ( Synch ) [ without MM ]
I am getting error message if I am sending from Webserver. when I am taking the same payload from MONI and when I send data (through test message ) from RWB, it goes sucesfully.
Where could be the problem?
please suggest.
regards,
venkat.

Can someone tell me .. how do I debug this?
1. I have initiated the transfer from web service.. When it dint reach the target, I have used the same ( from request MM ) and sent it using RWB from test message tab.
Now the message goes.
Why did the message dint go when I tried from WS and why is it going from test message using the same payload that is being used for request mapping?
2. Now I am planning to create a web service out of the Bapi i m  using on the receiver side. But tools -> define web services is not showing me that BAPI, same time ... .I cant see soap location option in the WSDL ( already XI created after importing BAPI to XI )
no errors anywhere ...
Just the response says not created and i dont see it created once i logon to ERP.
plz help !!!

Similar Messages

  • Messages from others are not showing in the correct order.

    I can send a message from my iPhone ... and it will show up at the bottom of the conversation in Messages on my Mac as the most recent message. But when I receive a reply, it does not show up as the most recent message.  Instead, it appears further up the conversation in the past.
    Anyone else having that problem?  Is there a fix?  Thanks!

    Hi,
    Unfortunately this seems to happen.
    It is more noticeable when the Mac has been Off line (Shut Down or Sleep) and a conversation or two has been happening on an iOS device.
    When the Mac gets turned On Messages tries to catch up.
    These iMessages play out like a speeded up chat but are not Instant.
    Consequently any further parts of the conversation then get placed in between and out of sync.
    Jabber  and AIM IMs are times stamped and it would appear that the iMessages ones are as well
    What does not seem to happen with the iMessages ones is the App using those Time Stamps to put them in order again.
    Currently there is no fix (other than keeping the computer On and Awake)
    9:55 PM      Thursday; November 8, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Sent mails from CRM are not reaching to destination..

    Hi experts, good afternoon.
    I have configured an action to trigger an email when the document is saved.  But the problem is action is shown as executed in transaction level, even in SCOT it is showing as completed but in SOST sent mails it is not shown and it is not reaching to my mail inbox also.
    Please help me out in this regard.  Please let me know what could be the problem.
    Regards
    Madhav

    Hi Maddy,
    I am facing the same issue. I was not able to see any of my entries in SOST. I went to the tab 'send status' in SOST and and clicked on the button 'Further' and selected 'Still Not Entered in Queue'. Now I can see it in SOST with status 'Still no entry in queue'.
    Are you also facing the same problem? When you find the solution, please let me know.
    Regards,
    Neena

  • Messages are not reaching to Adapter Engine (JMS receiver)

    Hi Friends,
    We have one scenario running on Production env.
    Scenario is: R3(IDOC) -> XI ->JMS Provider
    IDOC to JMS.
    Sometime we found messsages are successful in SXMB_MONI, but those messages entries are not found under AE.
    Means they are not reaching to JMS.
    Communication channel is green, without any error.
    This happens sometime only, and no changes have been done to JMS adapter parameters.
    What might have happen to these messages, which are successful in MONI but not visible under AE.(Even not in Archived option)?
    I searched on SDN, but most of the questions are unanswered.
    Please let me know your inputs.
    Divyesh Vasani

    Hi Divyesh,
    check under message monitoring in RWB
    if u r not finding the message there , those might be archived.
    did u confirm with the destination system .. if they got the messages?
    if at all messages are stuch in AE ... and if u search the correct message u should be able to see the message.
    if the Integration engine unable to put messages in AE , then in some pipeline step in MONI it will show error

  • Im running lightroom 4 and just purchased the Sony A7 and using its sd card. when I   tried to load the photos, I got a message "the files are not recognized by the raw format support in lightroom"

    Tried loading my raw files shot w my new Sony a7 and its sd card into lightroom4. Got a message: "The files are not recognized by the raw format in lightroom"
    Does Lightroom 4 not work with the Sony A7?
    Thanks,

    Lightroom 4 cannot read the RAW photos from a Sony A7
    You would have to download and install the FREE Adobe DNG Converter version 8.5 and then convert your RAW to DNG, and then import the DNGs into Lightroom 4
    You could also purchase Lightroom 5.5, which will have the capability to read the RAWs directly.

  • All my purchased song from iTunes are not playing complete (iPod and computer with Windows Vista), unexpectedly stops and continues with next song. What am I doing wrong?

    All my purchased song from iTunes are not playing complete (iPod and computer with Windows Vista), unexpectedly stops and continues with next song. What am I doing wrong?

    Are the songs playing whole in iTunes? if not download them again.
    else read this Apple Support Article on your problem
    Have a nice day!

  • RFC Function Module - Message Reference parameters are not allowed with RFC

    Hi,
    I’ve checked the Remote-Enabled Module radio button, declared Import and Export parameters using ‘Type’ typing and checked the ‘Pass Value’ in export and import parameters but I still receive message ‘Reference parameters are not allowed with RFC’ and not able to activate the function module.
    Am I missing something?
    Regards,
    ...Naddy

    Hi all,
                   I faced the same problem and solved it ,
    You have defined a reference parameter for a remotely called
      function module. However, only value parameters are allowed
      for this type of module.
      Procedure
      Change the reference parameter to a value parameter.
    Guys  pls .don't leave the thread un-asnwered when you solved problem , post the solution it might be useful for others also.
    Regards
    Krishna Acharya

  • My Notes from iPhone are not being saved to Notes in Outlook when I sync.  How can i get Notes to back up in Outlook?

    My Notes from iPhone are not being saved to Notes in Outlook when i sync.  How can I get Notes to back up in Outlook?

    I have iPhone 4S

  • I've just upgraded to OS 10.8.6. Now when I try to export an ipages 09 document to .doc, I get the message "character borders are not supported and were removed," and the file is saved as .pages.

    I've just upgraded to OS 10.8.6. Now when I try to export an ipages 09 document to .doc, I get the message "character borders are not supported and were removed," and the file is saved as .pages.

    I think you would get more expert advice if you asked this in the iWork forum - its really an iWork question
    G

  • E-REC-Job Postings are not reaching to internal career channels

    Hi All,
    Recruiter Published job postings are not reaching to internal career sites.
    Can any one share their experiences on this pls.
    We already executed the HCM_ER_Jobpostings as well...but still...!!!
    Thanks,
    Asha...
    Edited by: Sikindar on Jan 24, 2012 9:53 PM

    Hi Asha
    Re-check the period for which Job Posting is open. The posting may not be valid for the current date.
    Also you could test and see if the same is reflecting in another channel (external). Let us know!
    Also check link: http://wiki.sdn.sap.com/wiki/display/ERPHCM/Aparticularobjectisnotshownintheresulthitlist
    It might help!

  • Graphs:  columns are not reaching the correct axis data.

    I am so frustrated with Illustrator's graphs and charts!
    I've watched the Lynda.com videos and created several graphs.  But in particular is not working correctly.  I've entered the data correctly but the column are not reaching correct Value Axis.  For example: one value is 11%, instead of the column reaching just above the 10% tick mark it is below it.  This is happening for all the data in the chart. 
    I have created a column design with the %00 code to display the values above the columns and it seems to be including the height of the text in the column height.
    Any suggestions to fix this?
    HELP! 

    Have you already read this: http://help.adobe.com/en_US/illustrator/cs/using/WS3f28b00cc50711d9fc86fa8133b3ce158e-8000 .html#WS714a382cdf7d304e7e07d0100196cbc5f-61a3a
    "Create a sliding column design"
    The text will be part of the design no matter where the invisible rectangle is located.

  • My messages and FaceTime are not working

    my messages and FaceTime are not working

    Hey Nouman Al Bakri,
    Thanks for the question. I understand that you are experiencing issues with FaceTime and Messages on your MacBook Pro. The following resources may provide a solution:
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/TS4185
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    If the above does not resolve your issue, can you describe what exactly is not working with these applications?
    Thanks,
    Matt M.

  • Long motor test error did not reach target speed in time.  fan runs all the time.  sensor is connected.  do I have a bad fan?   speed in time speed

    ran apple hardware diagnostics.  fan - master - long motor test error:  did not reach target speed in time.  fan runs all the time.  sensor is connected.  do I have a bad fan? 

    ran apple hardware diagnostics.  fan - master - long motor test error:  did not reach target speed in time.  fan runs all the time.  sensor is connected.  do I have a bad fan? 

  • Some messages are not reaching my webmail INBOX

    I use an email forwarder so that my email address is [email protected] (It's not really xyzzy but you get the idea.) They redirect messages to my actual Verizon email address.
    In the past week, some emails sent to xyzzy are not getting to VZ. POBOX says they are forwarding them and sent me the following for one test message:
    I have found the message in question:
    138587ec  6 10:41:56 sepia postfix/cleanup[21713]: 7F50A40A675: message-id=<[email protected]>
    138590ec  6 10:41:56 sepia postfix/qmgr[32466]: 7F50A40A675: from=<SRS0=+HRw=6S=pobox.com=[email protected]>, size=1018, nrcpt=1 (queue active)
    138599ec  6 10:41:56 sepia postfix/smtp[21995]: 7F50A40A675: to=<[email protected]>, relay=a-pb-fb-quonix.pobox.com[208.72.237.7], delay=0, status=sent (250 2.0.0 Ok: queued as C31D97308)
    If you still cannot find this message, I would suggest contacting Verizon with these logs to find out if they know where this message went. According to our logs, this message was sent successfully to your forwarding address.
    I chatted online with a VZ tech support person who didn't know what an email forwarder was but he said that someone would call me in 15-20 minutes. When no one called in an hour, I called VZ. I got to Shilpa on the second level who insisted that I had to download and run a program that would let them control my PC. I refused, offering to send them an email with the above message from POBOX.COM. She insisted on the remote assistance app, and then decided that she could not help me if I did not comply. I asked for her supervisor. She agreed to transfer the call and then placed me on hold FOR TWO HOURS, at which point VZ terminated the call.
    I'm hoping that some VZ email wizard can pass the above log to an email administrator who can solve the problem of the never-appearing emails.
    Thank you in advance.

    pjh wrote:
    I use an email forwarder so that my email address is [email protected]. (It's not really xyzzy but you get the idea.) They redirect messages to my actual Verizon email address.
    In the past week, some emails sent to xyzzy are not getting to VZ. POBOX says they are forwarding them and sent me the following for one test message:
    I have found the message in question:
    138587ec  6 10:41:56 sepia postfix/cleanup[21713]: 7F50A40A675: message-id=<[email protected]>
    138590ec  6 10:41:56 sepia postfix/qmgr[32466]: 7F50A40A675: from=<[email protected]>, size=1018, nrcpt=1 (queue active)
    138599ec  6 10:41:56 sepia postfix/smtp[21995]: 7F50A40A675: to=<[email protected]>, relay=a-pb-fb-quonix.pobox.com[208.72.237.7], delay=0, status=sent (250 2.0.0 Ok: queued as C31D97308)
    If you still cannot find this message, I would suggest contacting Verizon with these logs to find out if they know where this message went. According to our logs, this message was sent successfully to your forwarding address.
    I chatted online with a VZ tech support person who didn't know what an email forwarder was but he said that someone would call me in 15-20 minutes. When no one called in an hour, I called VZ. I got to Shilpa on the second level who insisted that I had to download and run a program that would let them control my PC. I refused, offering to send them an email with the above message from POBOX.COM. She insisted on the remote assistance app, and then decided that she could not help me if I did not comply. I asked for her supervisor. She agreed to transfer the call and then placed me on hold FOR TWO HOURS, at which point VZ terminated the call.
    I'm hoping that some VZ email wizard can pass the above log to an email administrator who can solve the problem of the never-appearing emails.
    Thank you in advance.
    If the email forwarder is not getting a bounceback, set your spam detector to save messages instead of deleting them in verizon.net and see if they show up in your spam folder.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • HT3529 My wife and I both have an iphone.   We initially created it under her apple id.   We will receive each others text messages from certain people not all.   Any ideas why and what we can do to stop it

    My wife and I both have an iphone.  We initially set them up under one apple id account.  When we text sometimes we will receive each others text messages from others.   Example I will text a friend...she will not see my text but the reply comes to both of us.  It seems to be random which ones.  Any ideas how to correct this

    Yup, get your own AppleID.
    The messages that are being sent to both phones are technically not text, they are Apple's iMessage. They use the data part, not the texting part. So if you have an iPad or a Mac computer, you can send/receive the iMessages there too.
    KOT

Maybe you are looking for