Message GA603 when I'm create a Actual Distribution Cycle

Hi,
I'm trying to create a actual distribution cycle (transaction KSV1) and when I choose "Receiver Tracing Factor" to plan percent, I receive the error message GA603.
I need to do distribution from cost center to internal order group. Firstly, I created a order group.
Could anybody help me?
Thanks,
Osmar Tardivo.

I think it has something to do with the Internal Order group selection in the Receiver values.
Have you created the Group using GS01>Creating Set>with table CCSS and field AUFNR and then assign the values of internal order which you would want to group it.
Then assign the internal order group created in receiver and try to click on the Receiving Tracing Factor...
I hope this helps.

Similar Messages

  • Output type not proposed in Message Control when PO is created

    Hi,
    DETAILS
    I have set up the system to send a IDOC when a PO is created. I have done the following settings in the system to send the IDOC using the message control functionality in the PO creation screen.
    1). Created a new output type ZNEU which is an exact copy of NEU output type provided by the SAP system.
    2). Assigned the new output type to the output determination procedure.
    3). Enabled the new output type ZNEU for ALE distribution.
    4). Maintained the condition records in the system for the output type ZNEU such that for the P org, endor and Docmuent type combination the output shall be proposed.
    5). Maintained a partner profile( Logical System ) and assigned the output type ZNEU to this partner profile.
    6). Created a Distribution model for Sender ~ Receiver for ORDERS message type.
    PROBLEM
    When i create a PO the new output type is not getting proposed by the system. I am not sure why it is not getting porposed in the message control.
    I tried to manually enter the ZNEU output type in the system to see if the system is accepting. I am getting an error
    Partner % does not exist for partner function LS
    Any idea what i am missing? Am i missing any configuration or am i doing something wrong?
    cheers

    The output is not being proposed automatically is becuase you are missing "Condition Records" for the output type ZNEU.
    Go to NACE.
    Select EF - Purchase Order
    Select "Condition Records"
    Select ZNEU and select condition records
    Now, system will bring the combinations of access sequence. Maintain appopriate record.
    This will enable you to get the output type automatically in the purchase order.
    Regards,
    Naimesh Patel

  • How come I keep getting errror message -50n when trying to create slow motion footage?

    How comme I can not slow motion a section of video keep getting error message -50?

    Tried that still coming up with error message: -50? set up a troble call to apple thanks...

  • Error message when trying to create EM Repository

    Hi!
    The following message came when trying to create the EM Repository:
    EXCEPTION_ACCESS_VIOLATION ...
    Java VM: ...
    C [oranl11.dll+0x4a4ba]
    Environment: Windows Server 2003 R2, Oracle 11gR2 (Version 11.2.0.2.0)
    The log file 'emca_repos_create_2011_03_06_11_47_59.log' finished with no errors.
    What could be the problem?
    Edited by: user545194 on 06.03.2011 10:51

    Hi!
    I have installed the newest Java version: Java SE Development Kit 6u24
    on Windows Server 2003 R2, but still have the same problem, when trying to
    create the EM repository.
    I also cannot check Java via command prompt: java -version.
    Maybe this is a security issue on Windows Server 2003?
    Edited by: user545194 on 11.03.2011 00:53

  • Actual Distribution FAGLGA31 (ECC6.0)

    Hi All,
    During creation of distribution cycle using tcode: FAGLGA31 - Create, I faced problem of having valid sender, ie: cost center in the segment creation.
    In my sender/receiver tab, I can have
    Senders as follows:
    Account number
    Business Area
    Functional Area
    Profit Center
    Currency
    Receiver:
    Business Area
    Functional Area
    Profit Center
    Question:
    Why I cannot have cost center as sender and receiver?
    Does anyone know any ECC6.0 (NEW GL) settings that were missed out?
    Thanks.
    sbmel

    Hi ...
    I tried to run the Actual distribution cycle FAGLGA35, and I have the follow error:
    general messages for cycle 0LFBCA001 01.01.2010       ***********
    Cycle 0LFBCA001, start date 20100101, does not include any senders.
    General messages for segment FBCA001       ***********************
    No valid sender entries were found.
    Does anyone have any idea on this?
    Extended error message:
    ==========
    Cycle 0LFBCA001, start date 20100101, does not include any senders.
    Message no. GA749
    Diagnosis
    No senders were found for cycle 0LFBCA001, starting date 20100101.
    System Response
    It is no longer possible to create receivers and assign senders for the segment.
    Procedure
    Check the definition of the cycle in the maintenance transaction for Actual Distribution: General Ledger. No valid sender cost centers could be found to match your selection.
    If you use the sender rules "Posted amounts" or "Posted quantities", check whether records exist in the database for the criteria you entered (cost element, version...)
    During indirect activity allocation with the sender rule "posted quantities", you should also note that only the difference between the planned/posted activity allocation and the scheduled activity quantity is allocated. If you entered activity types as sender, you should at this point also check the activity type category. For those quantities posted with an activity type of category 1 (manual entry, manual allocation) no indirect activity allocation is possible.
    1. If this is an allocation in the FI/FI-SL area, the problem could also be due to the inheritance logic for FI-SL totals tables, whose "Inheritance of sender based on the receiver" indicator is activated in the "Partner object update" view (T811U-INHERSRC). These are tables that were installed before Release 4.6A.
    Use transaction GCA8 to check this, and see the section on:
    Inheritance Logic for Allocations
    then correct the affected cycle, if required.
    ==========

  • Error message in Adobe Pdf in printer device panel when trying to create a pdf document.  I have CS3

    Error message in Adobe Pdf in printer device panel when trying to create a pdf document.  I have CS3 Web Premium with Acrobat Professional 8.  I use it fine on my old computer with Windows XP.  I recently got a new laptop with Windows 7.  I installed all my Adobe programs, and I think they are working.  When I look at Adobe PDF in the device section of the Control Panel it looks okay.  But when I try to print a Word, Photoshop, or HTML page in PDF, nothing happens.  I have tried printing both as File>print and using the PDF tab on the top menu bar.  I look at the device in the control panel and it has the yellow error warning symbol and suggests trying to troubleshoot.  I look at the document list and it says status "error".  When I try troubleshooting Windows suggests doing some Home Sharing and also suggests canceling the document I'm trying to print.  I tried re-installing just Acrobat 8 from CS3 (and have to use Photoshop CS4 disk for shared documents I guess).  I ran into a can't locate adobepdf_dll file, so did a web search on this issue and found a suggestion that I find and use the adobepdf_dll_64 file and may have to (I did have to) remove the "_64" for it to work.  I think I successfully reinstalled using that dll file- no errors came up anyway.  But still when I try printing/converting a photoshop, webpage, or word document into pdf, the pdf device in control panel still gives the error status on the document and gives the same troubleshooting advice.  Help?

    I just compared the properties between the two computers.  On the old computer it has the port as "My Documents/*.pdf".  On my new computer it lists the port as "LPT1".  I tried changing the port to "Print as File", but when I try printing a photoshop picture as pdf, I get a "Access Denied".  I then tried to create a new port on the device control panel.  I tried to create a local port "My Documents/*.pdf" port but was denied.  I ten tried to create a new port type and control panel asked for an INF file.  I wonder if this is where my problem lies.  Thoughts?

  • Error message when trying to create a unique name

    Why do I keep getting an Error message when trying to create a unique name for a location on your site. I am simply looking to use your free 2GB space to store some pics and vids but keep getting an error message.

    How come Leopard let me use the WGM in standard mode?
    While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
    If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
    If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
    So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
    Yes.

  • After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes".  I cannot now access iTunes.  How can I resolve

    After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes".  So, now after the upgrade, I cannot access iTunes.  How do I resolve this??
    Thanks

    zepel has it, but perhaps some more detail will help.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • The error message "Scratch disk is full" when trying to create

    the error message "Scratch disk is full" when trying to create a image/logo in Photoshop CS6

    Hi Weed42,
    This has been discussed in the following forum links:
    http://forums.adobe.com/thread/1164997
    http://forums.adobe.com/message/4968658
    Let us know if this helps,
    Regards
    Gurleen

  • Please wait message when opening form created by Adobe LiveCycle Designer ES 9.0

    Problem
    Please wait message when opening form created by Adobe LiveCycle Designer ES 9.0
    Full message
    Please wait... If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document. You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting  http://www.adobe.com/products/acrobat/readstep2.html. For more assistance with Adobe Reader visit  http://www.adobe.com/support/products/ acrreader.html. Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S
    Actions
    Updated Windows RT 8 to 8.1
    Uninstaled Adobe Reader Touch 1.3 and instaled 2.0 Build 84770
    Additional Information
    The form was created 10 or 11 months ago, and we are pretty sure that we were able to open it a while back
    The same PDF file opens just fine in Windows 8.1 using Adober Reader XI 11,0.06, it is only the app that is affected.
    The document cannot be opened by any other mobile app that we have tried or on another mobile OS (iOS)
    Any ideas?
    Thanks & Regards
    Jim

    The user's assertion is surprising to me, but perhaps I'm missing something important. I thought the correct position was from the conclusion of my earlier post "it can't be done". Adobe state their Reader Touch doesn't support XFA (http://blogs.adobe.com/readermobile/2012/12/13/adobe-reader-for-windows-8-tablets/). Unless (see that blog entry) you changed the type of form.

  • Recently purchased a 2nd handed iphone 4 (that's all i afford) but when trying to create icloud account it give me "com.apple.appleaccount error 403" message. I am asking for support and advice.

    recently purchased a 2nd handed iphone 4s(that's all i afford) but when trying to create icloud account it give me "com.apple.appleaccount error 403" message. I am asking for support and advice.

    Did you already check this post?
    Re: I am facing problem in signing in iCloud on my iPhone. when I enter my Apple ID, I got the message which is: "The Operation could't be completed. (com.apple.appleaccount error 403.)"  Kindly solve my problem. I want to sign iCloud from my iPhone.worri

  • Why need message type when u create data type...

    why need message type when u create data type...

    Hi,
    A message type comprises a data type that describes the structure of a message. At the following points in SAP Exchange Infrastructure you can refer to the message to be exchanged at runtime by using the message type:
    ·        More than one message interface can use the same message type. For example, an asynchronous outbound message interface and an asynchronous inbound message interface can reference the same message type because the request message does not need to be mapped.
    ·        When defining a message mapping you can directly reference message types to map messages from an outbound interface to messages from a receiver interface.
    For technical reasons, a data type is not sufficient to describe the instance of a message. In XML schema, data types are defined as abstract types that are not yet fixed to an element. You can only describe an instance of a message when you have specified a data type as an element type. Therefore, a message type defines the root element of a message.
    A message type does not define the direction of the message exchange, in other words, whether it is a request or a response. In exceptional cases you can use the same message type for both the request and the response message.
    A message type has the following characteristics:
    ·        It comprises exactly one data type, which determines the content of the message to be transferred.
    ·        It is identified by a name and an XML namespace. The name (together with the namespace) of a message type is located in the uppermost tag of the message to be exchanged. This is an element tag.
    You have defined a message type GreetingRes that references a simple data type of type xsd:string. The XML namespace of the message type is http://sap.com/xi/myExample. The corresponding payload might look like this:
    <?xml version="1.0" encoding="utf-8" ?>
    <ns1:GreetingRes xmlns:ns1="http://sap.com/xi/myExample"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
       Hello Mrs. Miller
    </ns1:GreetingRes>
    You can specify how a message type is used in more detail in the description
    hope this will help you.
    regards
    Aashish Sinha
    PS : reward points if helpful

  • When i am creating a free iCloud a/c the message is being displayed as"This device is no longer eligible for free iCloud a/c", when i am creating a free iCloud a/c the message is being displayed as"This device is no longer eligible for free iCloud a/c"

    when i am creating a free iCloud a/c the message is being displayed as"This device is no longer eligible for free iCloud a/c", when i am creating a free iCloud a/c the message is being displayed as"This device is no longer eligible for free iCloud a/c"

    There is a limit to how many free accounts that can be created on an iOS device. You will either need to use one that you've already created on it, or create another one on a different device or computer.

  • The following error message came when I tried to open Firefox and install Firefox Home. "can't create mcafee plug-in object: TypeError: Components.classes[cid] is undefined"

    The following error message came when I tried to open Firefox and install Firefox Home.
    "can't create mcafee plug-in object: TypeError: Components.classes[cid] is undefined"

    This issue can be caused by an extension or plugin that isn't working properly.
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]

  • The following error message appears when I try to create a PDF in Publisher:

    The following error message appears when I try to create a PDF in Publisher:
    PDFMaker cannot locate the Adobe PDF Printer's printer driver. Please re-install Adobe Acrobat 10.1.
    I have tried update patches to no avail.
    Can anyone please help?
    Thank you.
    Susan

    Hello Michael,
    My version of Publisher is 2010 and my OS is Windows 8.1.
    64-bit OS x64 based processor.
    I'm not too sure if this issue has arrisen when I upraded to Windows 8.1.
    My Dell printer(Dell all in one) has also stopped working due to a driver issue now not being supported.
    Thank you for taking the time to view my request.
    Kind regards,
    Susan

Maybe you are looking for