Message getting duplicated at receiver side

Dear all,
In one of the scenario, a Idoc is being pushed only once from the source SAP system, bu the receiving system reports that the final message is getting delivered multiple times.
Now the questions has been raised on XI, saying that XI is generating the duplicate messages.
I have checked the interface, it is simple 1 IDOC to 1 File scenario. And I have clearly responded back to the legacy team saying, that XI dooesn't duplicate messages.
Please share you thoughts on this and do we have any cases, where XI dupicates the messages.
Regards,
Younus

Hi,
In SXMB_MONI for every IDOC push how many enteries u r getting??? - Answer: One entry
Also,
In every entry please check the source message how many times the Idoc is appearing, Also the target message , how many times its repeating.. -
Answer: It is one to one mapping, one source message getting mapped to one target message.
I guess at the adapter engine level, something is happening, is there any possibility.
Regards,
Younus

Similar Messages

What does it mean when you receive a text on your iphone 6 form your own number and the message is duplicated on each side (sent/recieved) and has "verizon message" with a long number at the end of the text, duplicated as well?

what does it mean when you receive a text on your iphone 6 from your own number and the message is duplicated on each side (sent/received) and has "verizon message" with a long number at the end of the text, duplicated as well?

Great question stacybrownie! Let's get to the bottom of this so that it's not a cause for concern. When a message is sent to/from your own number, it will display as one sent, one received. This makes it display two messages as you are seeing. Let's clarify the second part of your question. Where do you see "Verizon Message" exactly? What is the long number at the end of the text? When did this start and is it with all text messages or only this instance?
AdaS_VZW
Follow us on Twitter at @VZWSupport

File to File (get confirmation from receiver side)

Hi All,
I have a FILE to FILE scenario (assynch of course) (both FTP) and the manager of this project is asking us to have a confirmation when the interfaces have been performed and received sucessfully in receiver side and LOG it in a table of our DataBase (Oracle).
I'd like to know what is the best way to achieve this ? How can the sender side know if the file has been received sucessfully in receiver side and thus the interface can log it in a DB table as sucessful ?
Thank you,
Regards

Hi Diego,
you can setup an Business Process where you receive the file sender message, send to the file receiver asking for an acknowledgment and define an exception branch for that. In the exception branch you map the error cases (for the two receiver of the status). In the normal branch you map the positive response for the status receivers. Finally you have the two send steps to the status receivers.
receive step
block
-normal branche
      --send step to file receiver
      --transformation positive 1
      --transformation positive 2
-exception branche
      --transformation negative 1
      --transformation negative 2
end block
send step status receiver 1
send step status receiver 2
Regards,
Udo

Reg. the Message Splitting on the Receiver side.

Hi,
We are getting a Docuement/Message from a EDI partner. we need to split that doc. to send some of the data to the CRM system and rest of the data to the R3 system from the same EDI Doc. so is it possible to map the same EDI doc. to differnt systems like R3 and CRM? if so then how do we do that?? we are using standard IDOCs in both R3 and CRM side.
I would be very much tankful to you if you could give me a suggestion.
Murthy

Narasimha,
Please correct me if i'm wrong. Your part of EDI document outbound message has to be reached R/3 System , and another part of EDI document outbound message has to be reached CRM System am I right?
If yes then u need to define the following objects.
2 Mapping programs.
Mapping program1 --EDI to R/3 (Map the necessary fields)
Mapping program2 - EDI to CRM(Map the necessary fields)
In ID :
Your outbound interface is same its EDI
so while defining Receiver determination configure with two receivers(CRM, R/3 -with no conditions).
Interface determination1 - as ususal choose inbound interface as R/3 (IDOC message type) and the corresponding Mapping Program1 as mentioned above.
Interface determination2 - as ususal choose inbound interface as CRM (IDOC message type) and the corresponding Mapping Program2 as mentioned above.
So if you look the objects in ID, it must have
1 Receiver determination - with 2 configured receivers.
2 Interface determination
2 Receiver agreement.
If you have any doubts reply back.
Best regards,
raj.

Message Schema changes on receiver side..Need Help!!

Hi All,
The scenario is ECC --> PI --> MDM. The message payload schema that is seen in the Message Monitoring (Adapter Engine) in RWB is different from the message that reaches MDM side.
Also, specifically the Message header is lost in the schema on MDM side, this header is seen in the AE message monitoring. There is a exception generated in the Audit log of the AE(RWB). This is happening for random messages and not all of them
Please help with, what the problem can be and which area we should focus on to solve the issue
Thanks and Regards.
NehaSingh

Hi,
what kind of adapters/protocols are in use?
What kind of error message?
BR
André

How to get the information of the framerate and bitrate in receiving side

Hi,
I want to know if anyone here know how to get the frame rate and the bit rate statistic on the receiving side.
I know that it will be displayed on the info panel with the control component, but actually where can I obtain the stats into my program instead of reading by my eye.
Thanks for helping me.
Best regards
Ferdinand

Hi Raju,
It's basu here,
I used TADIR and TRDIR Tables , But There is no modified Information.
Means, Suppose if i modified any customized object , i want that information also in the Report.
Please Help me on this.
Thanks
Basu
Message was edited by:
karibasavakm Kumbargiri Math

Not getting Service interface in receiver side

Hi,
I am working on a newly configured PI server.
Here, I am working on a synchronous SOAP to RFC scenario from third party to ISU.
From the Display WSDL option of ID I have created a wsdl file and testing the scenario by importing wsdl file into SOAP UI. When I am sending some request from SOAP UI , I am getting proper response message ; that's mean interface is working fine and properly hitting the RFC in ISU.
I can see the message in SXMB_MONI of my PI server . But I am not getting the message in SXMB_MONI of ISU server . Even in SXMB_MONI of ISU I am not getting the inbound service interface also .
What can be the possible reason . As I am working on a totally new server should I do any configuration in the server to get the SI in receiver side.
Please help.
Thanks in advance.

Hi,
Please check if Sync logging is enable in ISU. refer the below blog
XI: I cannot see some of my messages in the SXMB_MONI
regareds,
Harish

When I send a text message to a friends phone I get a Not Delivered message but I can receive his message

When I send a text message to a friends phone I get a Not Delivered message but I can receive his message

Hello dgantz,
The following article provides information and steps that can help get Messages working correctly.
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Cheers,
Allen

How to Get the Source File Path in the Receiver Side

Hi Experts,
Here We are Trying to Do How to Get the Sender Information ( File Name & Path ) on the Receiver Side .
According to the Michal Blog
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Here we Are Able to Get only the File Name.
But If I Want to get the Total File Path Also means What Should I Do Here ????
Please Let Me Know
Regards
Khanna

Khanna,
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey fkey = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
DynamicConfigurationKey dkey = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory");
String fname = conf.get(fkey);
Sring path = conf.get(dkey);
String final=fname""path;
return ""final"";
Best regards,
raj.

Having issues receiving MMS and/or media content. I have visited several forums and did successfully receive at least one photo and sent one photo sucessfully. However, I am now unable to receive media via MMS. Phone displays message: "Get Media Content N

Having issues receiving MMS and/or media content. I have visited several forums and did successfully receive at least one photo and sent one photo sucessfully. However, I am now unable to receive media via MMS. Phone displays message: "Get Media Content Now 30KB", but it only emits a tone after pressing. I have add a MMS VPN already. Any suggestions??? Thanks!

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

I am after getting an iphone 4 but it will not send or receive messages or make or receive calls?

I am after getting an iphone 4 but it will not send or receive messages or make or receive calls?

Hi Erin4xx,
Thanks for the question. The following articles may provide a resolution to your issue:
iPhone: Troubleshooting issues making or receiving calls
http://support.apple.com/kb/TS3406
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/TS3780
Thanks,
Matt M.

Problem in Receiver side File Adapter using FTPS mode

Hello,
Here I am facing some problem in receiver side while using FTPS mode in the channel configuration.
The error message which i could see in the audit log is,
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: java.lang.NullPointerException
Can anyone help me out in solving this issue ASAP?
I am using Per file transfer mode ni the reciever channel.
Thanks in advance,
Yours
Soorya

HI Surya,
First check wether server started or not and then check you are connecting to FTP server by
go to run -> cmd and write ping and ipaddress which is used and see whether u r getting reponse from teh FTP server.
Try to login to the ftp server which you have mentioned in CC using the user name and pwd, to chk whether you have the permissions to login to the server.
Also the check whether the folder you are trying to access is having permission for delete/read/write.
Restart the FTP server and try it again.
Regards
Sridhar Goli

FCC in receiver side in idoc to file scenario

Hi all,
           I am doing an idoc to file scenario using FCC .I am using FCC in receiver side ,but i am getting my output file in only one line while i want structre to be seprated by new line.for more information i am giving muy file structre.
Record
    header(1to1)
    data    (0 to unbounded)
    footer (1to 1)          header, data, footer are three structre which contain various fields.I have to use fieldFixedLengths as filed separator. I am also using endseperator as 'nl' but its not coming in new line.Please share ur views on this issue.
Regards
Neha

hi neha,
In your scenario
Recordset Structure header,data,footer
header.fieldFixedLengths    = 1,2,3, whatever it is
data.fieldFixedLengths      = similar to header
footer.fieldFixedLengths    = similar to header
header.endSeparator = 'nl'
data.endSeparator = 'nl'
footer.endSeparator = 'nl'
I guess you dont have to do any thing else.
Regards
Pushkar
Message was edited by:
        Pushkar Anand

Encoding in Receiver side file adapter

Hi All,
I have special characters in message structure. While writing the message to output file the special characters are not getting printed(getting replaced by '?'); I have tried using UTF8, ISO-8859-1 and other code pages related to latin characters; Still facing an issue. I have tried using Binary mode also.
I tried using similar encoding formats in sender adapter. It was working fine and all the special characters are visible.
Is this problem in receiver side file adapter? Any inputs on the same will be a lot more help ful.
Thanks in advance
Nik

Hi
I have é, à and some other characters in my source message structure. The same characters are visible in message monitoring. While writing to file, they are being replaced by ?
This type of character are generated using UTF-8
use the same for receiver
The default setting for code page is the system code page that is specific to the configuration of the installed operating system.The content of the message needs to be converted to the corresponding code page before the message is saved as a file.
You should use this conversion only for plain text and not for XML documents. If you want to change the encoding of an XML document, then select the File Type as Binary and apply XMLAnonymizerBean as an additional module in the Module tab page.
Thanks
Gaurav

Creating Multiple Files with different name at Receiver side

Gurus -
Can anybd tell me how to generate multiple files at the Receiver side in the given target directory with different file names?
One source message will contain number "N" using which we have to generate files "N" number of times at the Receiver side.
Kindly help.

hi,
are you following this blog?
provided you have SP>14 and no IDOC/HTTP involved.
and have you got the error you mentioned when testing with sample payload?
from where did you take the payload? if is from SXMB_MONI make sure you dont have <MESSAGE> tags in the payload,generally systems adds <MESSAGE> tags when you do multi mapping.
get the payload from SXMB_MONI right click ->view source payload(this is raw data) and test it.
it should be ok now.
and refer my discussion in the thread ,as I got he same error.
Split mapping created no messages -Mluti Mapping

Message getting duplicated at receiver side

Similar Messages

Maybe you are looking for