Message getting struck at Request Message mapping

Hi All,
In our interface we have Proxy to HTTP scenario.  When we trigger data from R/3 system the data is getting blocked at SAP XI system.
In SXMB_MONI when we see the status of the message it doesnot show any error status flag comes with a grey dot .
Generally as per the XI Message process flow it should be some thing like this
Inbound message
Receiver Identification
Interface determination
Message Branch According to receiver list
Request message Mapping
Technical Routing
Call Adapter
Response
When we expand and see the message monitoring it shows the following steps -
Inbound message
Receiver Identification
Interface determination
Message Branch According to receiver list
there is no error messages and you dont see any steps in monitoring after this.
Trace level is set to 3 and also set trace enable for sync interfaces.
Please let me know if some one faced this issue and how to resolve this.
Regards,
Reddy
Edited by: Nanda kishore Reddy Narapu Reddy on Apr 8, 2008 5:31 PM

Hi Srinivas,
If receiver determination gets fail then it should give a error in SXMB_MONI messages.
In the trace messages of the "Message Branch According to Receiver list" step in SXMB_MONI we are getting the details of the receiver and also the Communication channel need to be used also correctly.
I would like to stress that after this step in sxmb_moni it should trigger "Request message mapping" step  but it is got getting triggered.
Pls let me know if some one faced this issue or is it because of some cache related issue which is stopping the call to trigger message mapping.
Reagrds,
Reddy

Similar Messages

  • I get a bad request message when trying to open my mail in Yahoo.

    I keep getting a "bad request" message when trying to open my mail in Yahoo.

    This issue can be caused by corrupted cookies.
    * "Clear the Cache": Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"
    If clearing the cookies doesn't help then it is possible that the file <i>cookies.sqlite</i> that stores the cookies is corrupted.
    Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete <b>cookies.sqlite-journal</b> and <b>cookies.txt</b>, if they exist, in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case the file cookies.sqlite got corrupted.
    * http://kb.mozillazine.org/Cookies#Removing_cookies

  • So my friend bought an iPod and she used my apple id because she knew my password and now all my messages get sent to her messages too. Is there a way to stop that?

    So my friend bought an iPod and she used my apple id because she knew my password and now all my messages get sent to her messages too. Is there a way to stop that? I don't want her to be able to read all my messages:/

    Change your password.

  • 3 Messages getting struck in SMQ2 at same time with difference in seconds

    Hi all,
    Three  EOIO messages with Queue name QBTJ.......................(same Queue id  for 3days)
    that is day1 QBTJ(message (a)  queue id=day2 QBTJ  queue id=day3 QBTJ  queue id
    day1 QBTJ(message (b)  queue id=day2 QBTJ  queue id=day3 QBTJ  queue id
    day1 QBTJ(message (c)  queue id=day2 QBTJ  queue id=day3 QBTJ  queue id
    .These are getting struck in smq2 at same times (compared the timings 3 days).the time at which these messages are getting struck are same with the difference in seconds.
    Other than these 3 different times ,these messages are moving with out strucking in SMQ2.
    I have two questions here
    1)what could be the reason for only these three messages are getting struck in smq2
    2)is there any parameter which could be set in SXMB_ABMIN to unlock the queue automatically with out going to smq2 and manually unlocking.
    Please do not send nonrelavent blogs
    Thanks,
    Srinivasa

    Hello,
    you can schedule the report RSQIWKEX in your XI system. This report does automatically unlock all queues.
    See the blog for more details.
    regards,
    Björn

  • Why do receivers of my text messages get them mixed with messages I have sent them in the past?

    The hardware is an iPhone 4 on iOS 5.1.1 with a capacity of 16GB (14.0GB). Currently I have 1.8GB available memory. The phone has never been jailbroken and no external accessories have ever been attached to it.
    The problem:
    Some of the receivers of my text messages have recently told me that a number of my text messages are coming in a little jumbled up. Apparently the message I had just sent gets concatenated with a past message or various past messages. The order where the past message gets mixed is not always the same - sometimes it's in front of what I have typed and sometimes it's in the end but in all cases inserting the past message also deletes parts of the message I typed. Furthermore when checking the thread there seems to be nothing wrong and the messages are shown in the same way I have typed them rather than how the receiver got them.
    The question:
    I have tried to see if other users on the same carrier, from the same locations as myself had the same problems as myself on other systems. I have checked Symbian, BB, Android and the older type of non smart phones and I have found no one with this problem. This rules out the carrier completely.
    I would like to know if this is a problem which requires intervention by Apple or if it something I can fix myself. I have reinstalled the iOS5.1.1 yesterday but the problem seems to stay. I have turned the phone off and on a couple of times but it was in vain. I have also turned the phone off by holding the home and the standby buttons, but the problem seems to stay.
    Any help would be very appreciated. I do not find any objection if I have to take my phone back to the official seller but if it something I can handle myself I would save them the hassle.
    Thank you in advance.
    Dan

    Its because you are sending them as iMessages and not SMS.
    If you want to turn iMessage off, go to settings, messages and turn it off.

  • How to link confirm_bod message to a OAG request message

    hi,
    I have a composite that receives a OAG message and sends functional acknowledgement(confirm_BOD) message back to the sending partner.
    How do we link the confirm_BOD with the original message?
    I have set b2b.replyToMessageId of confirm_bod with the b2b.messageId of the original message and populated the confirm_bod appropriately .
    The B2B Report shows the confirm_bod message in status MSG_COMPLETE, but the original message is still in status MSG_WAIT_FA.
    Any idea on how to link the messages so that the original message also goes in to MSG_COMPLETE status!!
    Thanks,
    Anil

    Hi Anil,
    Use content based correlation at B2B layer. Please refer -
    http://anuj-dwivedi.blogspot.com/2011/02/correlation-in-oracle-b2b-11g.html
    Regards,
    Anuj

  • Why do I get a 'Bad Request' message when trying to access my Provident Bank website bookmark?

    For some unknown reason, I cannot access my bank account, which is bookmarked. I can access all other bookmarks without incident. The bank says the problem lies with Firefox. This problem just occurred since I upgraded my Firefox.

    This issue can be caused by corrupted cookies.
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    See also:
    * http://kb.mozillazine.org/Cookies#Removing_cookies

  • Request Message Mapping - error

    Hello,
    Scenario :
    Flat file => File adapter => XI 2.0 => IDoc => SAP
    The adapter picks up the file, sends it to Integration Engine. In the Monitoring tool, the following are fine : Inbound Message, Receiver determination, Interface determination, Technical routing, Receiver grouping, Message split.
    We are getting error in Request Message Mapping. The error is below :
    ===========
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
      <SAP:Context />
      <SAP:Code p1="Error during mapping" p2="--- Creating Java mapping com.sap.xi.tf._zMsgMap_ --- Using MappingResolver with context URL /sapmnt/XID/global/xi/mapping/http%3A%2F%2FABCxyz%2Ecom%2Fxi%2FTest%2F/bc52cef0be3411d8b277cade640701c6/ --- Loaded class com.sap.xi.tf._zMsgMap_ --- com.sap.aii.util.misc.api.BaseRuntimeException: Fatal Error: com.inqmy.lib.xml.parser.ParserException: XMLParser: No data allowed here:BLO (:main:, row:1, col:3) at com.sap.aii.mappingtool.tf.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf.AMappingProgram.execute(AMappingProgram.java:100) at com.sap.aii.ibrun.server.map.RUMappingJava.execute(RUMappingJava.java:47) at com.sap.aii.ibrun.server.map.RURunner.run(RURunner.java:58) at com.sap.aii.ibrun.server.map.RUManager.run(RUManager.java:66) at com.sap.aii.ibrun.sbeans.map.MappingRequestHandler.handleRequest(MappingRequestHandler.java:62) at com.sap.aii.ibrun.sbeans.map.MappingServiceImpl.processFunction(MappingServiceImpl.java:72) at com.sap.aii.ibrun.sbeans.map.XMappingServiceObjectImpl0.processFunction(XMappingServiceObjectImpl0.java:24) at com.sap.aii.ibrun.sbeans.map.MappingServiceKey.processFunction(MappingServiceKey.java:10) at java.lang.reflect.Method.invoke(Native Method) at com.inqmy.services.rfcengine.RFCDefaultRequestHandler.invokeBean(RFCDefaultRequestHandler.java:73) at com.inqmy.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:47) at com.inqmy.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:69) at com.sap.mw.jco.JCO$Server.dispatchRequest(Unknown Source) at com.sap.mw.jco.rfc.MiddlewareRFC$Server.nativeListen(Native Method) at com.sap.mw.jco.rfc.MiddlewareRFC$Server.listen(Unknown Source) at com.sap.mw.jco.JCO$Server.listen(Unknown Source) at com.sap.mw.jco.JCO$Server.run(Unknown Source) at java.lang.Thread.run(Thread.java:479) --- An error occured during the execution of the Java mapping com.sap.xi.tf._zMsgMap_ . Fatal Error: com.inqmy.lib.xml.parser.ParserException: XMLParser: No data allowed here:BLO (:main:, row:1, col:3) ---" p3="" p4="">MAPPING.GENERIC</SAP:Code>
      <SAP:Text language="EN">Error during mapping</SAP:Text>
      </SAP:ErrorHeader>
    ===========
    For same scenario, another interface, we get the below error :
    ===========
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
      <SAP:Context />
      <SAP:Code p1="Error during mapping" p2="--- Creating Java mapping com.sap.xi.tf._xMsg_mapping_ --- Using MappingResolver with context URL /sapmnt/XID/global/xi/mapping/http%3A%2F%2FABCxyz%2Ecom%2Fxi%2FTest%2F/bc52cef0be3411d8b277cade640701c6/ --- Load of com/sap/xi/tf/_xMsg_mapping_.class from /sapmnt/XID/global/xi/mapping/http%3A%2F%2FOwensCorning%2Ecom%2Fxi%2Ftest%2F/bc52cef0be3411d8b277cade640701c6 failed. --- Class not found: com.sap.xi.tf._xMsg_mapping_ --- java.lang.ClassNotFoundException at RUMappingJava.load(): Could not load class: com.sap.xi.tf._xMsg_mapping_ Class not found: com.sap.xi.tf._xMsg_mapping_ --- com.sap.aii.ibrun.server.map.MappingRuntimeException: at com.sap.aii.ibrun.server.map.MappingRuntimeException.code_STYLESHEET_OR_CLASS_NOT_FOUND(MappingRuntimeException.java:91) at com.sap.aii.ibrun.server.map.RUMappingJava.load(RUMappingJava.java:119) at com.sap.aii.ibrun.server.map.RUMappingJava.execute(RUMappingJava.java:40) at com.sap.aii.ibrun.server.map.RURunner.run(RURunner.java:58) at com.sap.aii.ibrun.server.map.RUManager.run(RUManager.java:66) at com.sap.aii.ibrun.sbeans.map.MappingRequestHandler.handleRequest(MappingRequestHandler.java:62) at com.sap.aii.ibrun.sbeans.map.MappingServiceImpl.processFunction(MappingServiceImpl.java:72) at com.sap.aii.ibrun.sbeans.map.XMappingServiceObjectImpl0.processFunction(XMappingServiceObjectImpl0.java:24) at com.sap.aii.ibrun.sbeans.map.MappingServiceKey.processFunction(MappingServiceKey.java:10) at java.lang.reflect.Method.invoke(Native Method) at com.inqmy.services.rfcengine.RFCDefaultRequestHandler.invokeBean(RFCDefaultRequestHandler.java:73) at com.inqmy.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:47) at com.inqmy.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:69) at com.sap.mw.jco.JCO$Server.dispatchRequest(Unknown Source) at com.sap.mw.jco.rfc.MiddlewareRFC$Server.nativeListen(Native Method) at com.sap.mw.jco.rfc.MiddlewareRFC$Server.listen(Unknown Source) at com.sap.mw.jco.JCO$Server.listen(Unknown Source) at com.sap.mw.jco.JCO$Server.run(Unknown Source) at java.lang.Thread.run(Thread.java:479) ---" p3="" p4="">MAPPING.GENERIC</SAP:Code>
      <SAP:Text language="EN">Error during mapping</SAP:Text>
      </SAP:ErrorHeader>
    ===========
    Any help in resolving these issues is greatly appreciated.
    Thanx,
    Homiar.

    Hallo Homiar,
    to the first problem:
    Do you get the same error, if you test the mapping in the Integration Builder:Design? I mean, you can download the XML instance which is entered into the Message
    Mapping  zMsgMap in the Integration Engine Monitor (R/3 Transaction SXMB_MONI) and use this XML in the test environment of the Message Mapping in the Integration Builder:Design.
    to the second problem:
    It looks like that the  Message Mapping xMsg_mapping could not be found by the Integration Engine. You can try to reactivate the Message Mapping in the Integration Builder. This is done for example by changing the description of the corresponding Message Mapping object and saving and activating the object.
    Regards Franz

  • Bad Request message when I try to go to websites.

    I have a Power Mac G4 533Mhz running on 9.1.1 It looks like I have 1.5 G with a backside of 1MB. I bought this computer in 1999 with high hopes for doing fun things but eneded up using it mostly for word processing for my office work! I am not ready to give up on this computer so I am now going to upgrade to Tiger. I already upgraded to max. memory. But now I am having trouble with the internet. I have AOL and Comcast. My problem is getting a Bad Request message when I try to get on the web through Comcast. Any ideas as to where to start to figure out this problem? I am so glad I found this discussion forum. I know I will be needing lots of advice in trying to fix up this machine.
    Power Mac G4   Mac OS 9.0.x   533 MHz

    Welcome To Discussions petuniapetals!
    Also, make sure that you use a Full Retail Version of the Tiger Install DVD.
    You will also need a newer version of AOL for Tiger.
    You can download this new copy of AOL For Mac OS X, and save to Desktop.
    Or download a copy of the AOL® Client from Macintosh Downloads - AOL Downloads, and save to Desktop.
    Good Luck!
    ali b

  • Getting a Bad Request Error upn logging into website - Safari goes right in

    Trying to access South Carolina Library information for students at an educational institution. When we get to the login page for the place we need to go, Firefox comes back with a 400 Bad Request Error. If the students use Safari, it goes right through. I prefer them to use one browser and would prefer Firefox. Any thoughts? Narrowing it down, it has something to do with networking and Firefox. I can log on as a local admin on the MAC and Firefox will go right through, but if the students log into to the MAC using Open Directory, I get the Bad Request message.

    Trying to access South Carolina Library information for students at an educational institution. When we get to the login page for the place we need to go, Firefox comes back with a 400 Bad Request Error. If the students use Safari, it goes right through. I prefer them to use one browser and would prefer Firefox. Any thoughts? Narrowing it down, it has something to do with networking and Firefox. I can log on as a local admin on the MAC and Firefox will go right through, but if the students log into to the MAC using Open Directory, I get the Bad Request message.

  • Request Message mapping in SXMB_MONI for File - RFC - File without BPM

    Hi ,
    In my File-RFC-File scenario, the messages are processed successfully.
    but when i look into the SXMB_MONI for File to RFC step, the records are present only till the  Message split According to Receiver List and not able to see the records from Request Message mapping step onwards.it contains
    <?xml version="1.0" encoding="UTF-8" ?>
      <ns1:Z_PI_LOTUSNOTES_UNIFORM xmlns:ns1="urn:sap-com:document:sap:rfc:functions" />
    in my mapping for the receiver RFC i have not done the mapping for all the fields. few fields i have disabled. whether this could create a problem in message mapping. pls let me know what needs to be done.

    Is it only for this scenario that the above display issue is occuring or is it for all scenarios?
    If onlt a particular Pipeline steps are displayed then you can check what is the TRACE level set in SXMB_ADM --> Integration Engine Configuration --> and check if the TRACE parameter is set to at least 2 (max is 3 which will ensure that your DB will get full quickly)
    For more information refer: /people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
    Regards,
    Abhishek.

  • RFC to SOAP Interface - Problem in Request Message Mapping

    Dear All,
    We are working on RFC to SOAP Scenario i.e. pulling out data from an WebService from SAP via PI.
    In Request Message Mapping, when the wsdl file is uploaded as Target Message, the wsdl request shows the nested elements like below.
    <Request>
       <Request_New>
          <PAR1>xyz</PAR1>
          <PAR2>123</PAR2>
       </Request_New>
    </Request>
    But the desired Request should go like below.
    <Request>
       <PAR1>xyz</PAR1>
       <PAR2>123</PAR2>
    </Request>
    Hence it gives an error saying that the tag Request_New does not exist.

    Dear All,
    Our target webservice cotains multiple methods.
    The every method contains its corresponding request, response and SQL ecxeption as messages.
    In case of request structures, every method (except crmPaymentReceived) contains more than 1 root element.
    So while calling those methods having more than 1 root element, the additional header tag will always appear(not avoidable) in the request coming from SAP PI.
    For Example,
    Request Structure for method u2018isLoginIdExistu2019 (having more than 1 root element)
    <?xml version="1.0" encoding="UTF-8"?>
    <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <soap:Body>
    <ns1:isLoginIdExistRequest xmlns:ns1="http://netpricing">      -
    >>>>>  u201CThis Header tag will always appear u201D
    <isLoginIdExistin0>asp</isLoginIdExistin0>
    <isLoginIdExistin1>1</isLoginIdExistin1>
    </ns1:isLoginIdExistRequest>
    </soap:Body>
    </soap:Envelope>
    For this method, we get the error(saying that ns1:isLoginIdExistRequest xmlns:ns1="http://netpricing" does not exists).
    Request Structure for method u2018crmPaymentReceivedu2019 (having only 1 root element)
    <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd=http://www.w3.org/2001/XMLSchema-instance xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <soap:Body>
    <ns1:crmPaymentReceivedin0 xmlns:ns1="http://netpricing">false</ns1:crmPaymentReceivedin0>
    </soap:Body>
    </soap:Envelope>
    For this method, we get the success response.
    I tested their wsdl URL in XMLspy and wizdal(a wsdl testing tool), it shows request in the format having only root elements and not the header tags.
    But header tags will always appear when header tag contains more than 1 root element.
    Can anybody suggest me how do I tackle this?
    Thanks in Advance.

  • oms_error Message:[oms] empty or null xml map request string.

    I'm using mapviewer. I create a stored procedure in oracle that uses the utl_http package to make the map request. The omserver response with an error but when i make a map request via internet explorer the server response its ok and show me the correspondent map. This is my pl/sql code it fails in this line:
    UTL_HTTP.SET_HEADER(l_http_req, 'Content-Type', 'application/x-www-form-urlencoded');
         UTL_HTTP.SET_HEADER(l_http_req, 'Content-Lenght', LENGTH(map_request));
         UTL_HTTP.SET_HEADER(l_http_req, 'Host', 'cobogis09');
         UTL_HTTP.SET_HEADER(l_http_req, 'Port', '8888');
    As you can see it tells to me that the map request string is empty but im sending the map request in the next way:
         UTL_HTTP.WRITE_TEXT(l_http_req, '<?xml version="1.0" encoding="UTF-8"?><map_request datasource="stream" srid="8307" basemap="" width="960" height="768" antialiasing="false" format="GIF_URL" title="Demonstration"></map_request>');
         l_http_resp := utl_http.get_response(l_http_req);
         utl_http.read_text(l_http_resp, l_value);
         response := sys.XMLTYPE.createxml(l_value);
         utl_http.end_response(l_http_resp);
         img_url := response.EXTRACT('/map_response/map_image/map_content/@url').getstringval();
    img_url := response.EXTRACT('/map_response/map_image/map_content/@url').getstringval();
    obviously because the server response its not ok
    the server response is (i get this message in my l_value variable):
    <?xml version="1.0" encoding="UTF-8"?><oms_error>Message:[oms] empty or null xml map request string.
    Tue Jul 25 10:37:43 GMT-05:00 2006
    Severity: 0
    Description:
         at oracle.lbs.mapserver.oms.getXMLDocument(oms.java:860)
         at oracle.lbs.mapserver.oms.doPost(oms.java:303)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:595)
    </oms_error>
    What i want to know its why the server says that the map request string is empty. As you can see the map request is not empty, but when i send to the server something happens that sends this map request string empty to the server.
    The next is the console of the omserver:
    C:\oc4j_extended>cd\
    C:\>cd C:\oc4j_extended\j2ee\home
    C:\oc4j_extended\j2ee\home>java -hotspot -Xmx512M -jar oc4j.jar
    06/07/25 11:00:49 INFO [oracle.lbs.mapserver.oms] oms root path: C:\oc4j_extended\j2ee\home\lbs\mapviewer\web\
    06/07/25 11:00:49 Oracle Application Server Containers for J2EE 10g (10.1.2.0.2) initialized
    06/07/25 11:00:49 INFO [oracle.lbs.mapserver.core.MapperConfig] using default config file: C:\oc4j_extended\j2ee\home\lbs\mapviewer\web\WEB-INF\conf\mapViewerConfig.xml
    06/07/25 11:00:49 WARN [oracle.lbs.mapserver.core.MapperPool] destroying ALL mapmaker instances.
    06/07/25 11:00:50 INFO [oracle.lbs.mapserver.core.MapperConfig] setting logging level to finest
    06/07/25 11:00:50 Tue Jul 25 11:00:50 GMT-05:00 2006 INFO [oracle.sdovis.CacheMgr2] In memory cache limit set to: 512MB
    06/07/25 11:00:50 Tue Jul 25 11:00:50 GMT-05:00 2006 INFO [oracle.lbs.mapserver.core.MapperConfig] Disk-based cache is no longer supported.
    06/07/25 11:00:50 Tue Jul 25 11:00:50 GMT-05:00 2006 INFO [oracle.lbs.mapserver.core.MapperConfig] setting proxy to: coboisa01.ag.ad.local:8080
    06/07/25 11:00:50 Tue Jul 25 11:00:50 GMT-05:00 2006 FINEST [oracle.lbs.mapserver.core.MapperConfig]
    Allowed IPs:
    Excluded IPs:
    06/07/25 11:00:50 Tue Jul 25 11:00:50 GMT-05:00 2006 ERROR [oracle.lbs.mapserver.core.MapperConfig] ###### [MapperConfig] clear-text passwords in the mapViewrConfig.xml file must be prefixed with a '!' (exclamation mark).
    06/07/25 11:00:50 Tue Jul 25 11:00:50 GMT-05:00 2006 INFO [oracle.lbs.mapserver.core.MapperConfig] Map Recycling thread started.
    06/07/25 11:00:50 Tue Jul 25 11:00:50 GMT-05:00 2006 INFO [oracle.lbs.mapserver.oms] *** Oracle MapViewer started. ***
    06/07/25 11:01:03 Tue Jul 25 11:01:03 GMT-05:00 2006 FINEST [oracle.lbs.mapserver.oms] request.getRemoteUser = jazn.com/admin
    06/07/25 11:01:03 Tue Jul 25 11:01:03 GMT-05:00 2006 FINEST [oracle.lbs.mapserver.oms] request= <?xml version="1.0" standalone="yes"?>
    <non_map_request>
    <add_data_source name="stream"
    jdbc_host="cobodata01"
    jdbc_sid="stream"
    jdbc_port="1521"
    jdbc_user="***"
    jdbc_password="***"
    jdbc_mode="thin"
    number_of_mappers="3"/>
    </non_map_request>
    06/07/25 11:01:03 Tue Jul 25 11:01:03 GMT-05:00 2006 FINEST [oracle.lbs.mapserver.oms] getRequestType: nodeName=add_data_source
    06/07/25 11:01:03 Tue Jul 25 11:01:03 GMT-05:00 2006 INFO [oracle.lbs.mapserver.MapServerImpl] adding a map data src [name=stream]
    06/07/25 11:01:05 Tue Jul 25 11:01:05 GMT-05:00 2006 FINEST [oracle.sdovis.SRS] loaded 748 geodetic srids.
    06/07/25 11:01:05 Tue Jul 25 11:01:05 GMT-05:00 2006 INFO [oracle.sdovis.CacheMgr2] Spatial Data Cache opened. Region=SDOVIS_DATA.
    06/07/25 11:01:05 Tue Jul 25 11:01:05 GMT-05:00 2006 INFO [oracle.sdovis.CacheMgr2] max_cache_size=512 MB.
    06/07/25 11:01:05 Tue Jul 25 11:01:05 GMT-05:00 2006 INFO [oracle.sdovis.CacheMgr2] sub region sdovis_subreg_gis_jdbc:oracle:thin:@cobodata01:1521:stream created in cache.
    06/07/25 11:01:05 Tue Jul 25 11:01:05 GMT-05:00 2006 INFO [oracle.lbs.mapserver.core.MapperPool] added a mapper instance to the pool [data src=stream]
    06/07/25 11:01:05 Tue Jul 25 11:01:05 GMT-05:00 2006 INFO [oracle.lbs.mapserver.core.MapperPool] added a mapper instance to the pool [data src=stream]
    06/07/25 11:01:06 Tue Jul 25 11:01:06 GMT-05:00 2006 INFO [oracle.lbs.mapserver.core.MapperPool] added a mapper instance to the pool [data src=stream]
    06/07/25 11:01:36 Tue Jul 25 11:01:36 GMT-05:00 2006 FINEST [oracle.lbs.mapserver.oms] request.getRemoteUser = null
    06/07/25 11:01:36 Tue Jul 25 11:01:36 GMT-05:00 2006 FINEST [oracle.lbs.mapserver.oms] request= null
    As you can see the arrive empty to the server, what can be wrong

    Hi,
    in this map request, it looks that the basemap string is empty.
    UTL_HTTP.WRITE_TEXT(l_http_req, '<?xml version="1.0" encoding="UTF-8"?><map_request datasource="stream" srid="8307" basemap="" width="960" height="768" antialiasing="false" format="GIF_URL" title="Demonstration"></map_request>');

  • Get Message ID and namespace from ABAP Mapping

    Hi XI Expert,
    Please advise how to get the message ID and namespace from ABAP Mapping.
    Thank You and best Regards
    Fernand

    Hi,
    To access the message ID, use the method GET_MESSAGE_ID of the controller object:
           1.      Fetch a protocol instance for the protocol IF_WSPROTOCOL_MESSAGE_ID.
           2.      To have the system return the message ID after the sender has sent a request message or the receiver has received a request message, use the method GET_MESSAGE_ID of this instance. This returns the ID by using the parameter MESSAGE_ID of type SXMSGUID.
    Also you could do the same by this way also:
    IF_WSPROTOCOL_XI_HEADER
    has attributes messageid and interface namespace.
    using this  you can read the XI message header

  • I am using a 2003 eMac and am running on Mac OSX  vs 10.4.11. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:  Cannot complete i Tunes Store request. A required iTunes com

    I am using a 2003 eMac and am running on Mac OSX  vs 10.4.11. I amrunning iTunes 8.2.1 (6) and not able to upgrade iTunes on this computer. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:
    Cannot complete  iTunes Store request. A required iTunes component is not installed (-42404)
    Please help.

    Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore.  I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere?  Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?

Maybe you are looking for