Message getting stuck in SMQ2 for proxy

Hi All,
    I am facing one problem in inbound queue of proxy scenario.   Some times messages are in scheduled status. In the trace i can see the following message.
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
if i am deleting the entry from SMQ2 and restarting the message will be success.
what may be the reason. Please help me.
Regards
Pradeep P N

Hi ,
One moreThis is happening in R3 system for proxy scenario. not in XI.
Regards
Pradeep P N

Similar Messages

  • Messages getting stuck in SMQ2

    Messages get stuck in SMQ2 with the Error msg "SQL error on database occurred when accessing a table".
    This is happening on PI system 7.11 SP04 with Max DB version 7.7.06.07.
    This typically happens when sending messages from one BPM to another although it has more of a random pattern.
    A corresponding dump is also seen in ST22.
    The dump details are as below:
    Runtime error : DBIF_RSQL_SQL_ERROR
    Exception : CX_SY_OPEN_SQL_DB
    Database error text : Invalid numeric value for parameter/column (10)
    Internal call code : "[RSQL/UPDT/SWFRXIHDR ]"
    Any help is highly appreciated in resolving this issue.
    Regards,
    Murali Narayanan

    > The dump details are as below:
    > Runtime error : DBIF_RSQL_SQL_ERROR
    > Exception : CX_SY_OPEN_SQL_DB
    > Database error text : Invalid numeric value for parameter/column (10)
    I would update the kernel (plus the database interface library lib_dbsl) to the latest patchlevels and try again. If the error persists I'd upgrade the database to the latest patchlevel. If it still doesn't work I'd open an OSS call (BC-DB-SDB).
    Markus

  • Messages getting stuck in QRFC Queue

    Hi,
    Today I noticed that a message had gotten stuck with the status "Sheduled for Outbound Processing" (scenario IDOC->XI->File), XI 3.0 SP11.
    This in turn had the effect that the whole QRFC queue got stuck, and all following messages got stuck with status "Sheduled".
    I had to remove the first message from the queue manually so that XI could start to purge the other messages from the queue.
    What could be the reason for the first messages getting stuck with this status ("Sheduled for Outbound Processing")?
    The message was very small, just a couple of lines. One thing that comes into mind, is that XI received 4 IDOCS for the same interface, within one second. These 4 messages were assigned to different queues, but one of them got stuck. Could there be problems with XI when several messages arrive on the same interface within a very short time?
    Is it possible to use Alerts to detect this kind of problem in the future? As I have understood, Alerts only handle XI "errors", but according to XI, this message did not have an "error status", it just had the status "Sheduled for Outbound processing"..
    Thanks for any help,
    Hans

    Hi,
    If the message got struck in Queue, you try to activate the queues in smq2 to reprocess the data instead of deleting it. This is the final solution. But you should able to see a dump in ST22 for this problem.
    thanks,
    sasi

  • Message getting stuck in XBQO queue - Time limit exceeded

    Hi All,
    We have a BPM scenario in our project (on PI 7.0 SP18), where bundle of PEXR2002 Payment IDocs are received as a single flat file. This file is then consumed by the BPM, to split the message into multiple payments using Java Mapping.
    However, when we get an IDoc file of size greater than 5 MB (more than 500 IDocs), the message gets stuck in XBQO queue and eventually giving a SYSFAIL with the message "Time limit exceeded". Could you please let us know if you have encountered a similar issue and are aware of a possible solution.
    Any pointers to this will be really appreciated.
    Thanks & Regards,
    ROSIE SASIDHARAN

    H Rosie,
    1)  Goto SXMB_ADM-> Integration Engine Configuration->Parameter  EO_MSG_SIZE_LIMIT->possible values 0 - 2,097,151 (KB)
    The parameter EO_MSG_SIZE_LIMIT enables serial processing of messages of a particular size. This applies for messages with the quality of service Exactly Once (EO). If the message is larger than the parameter value, the message is processed in a separate queue.
    2)  Goto SXMB_ADM-> Integration Engine Configuration->Parameter  HTTP_TIMEOUT->possible values n Seconds, where n is a whole number.
    The parameter Specifies the timeout for HTTP connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
      See SAP Note 335162  for sysfail issue....
      Hope these will help u....
    Regds,
    Pinangshuk.

  • Messages getting stuck in tcp_local Channel

    Hi All
    Version
    Sun Java(tm) System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004)
    libimta.so 6.1 HotFix 0.01 (built 12:52:04, Jun 24 2004)
    SunOS dakota 5.9 Generic_112233-12 sun4u sparc SUNW,Sun-Fire-V440
    Background
    In the last week we've been experiencing problems with outgoing messages getting stuck in our tcp_local channel. They can stay for up to 4 hours before dequeuing. We plan to install Patch 116568 which is the latest core patch for our version of the Messaging Server.
    To date we haven't experienced any DNS problems and have not made any configuration changes.
    However I was just wondering if anyone had come across this type of problem before? We're hoping the patch will resolve the issue but would be interested in other alternatives.
    Thanks in advance
    Paul

    You'll have to do more research before I can offer help. . .
    It's not unusual for some messages to be retried, and depending on the destination, that may take a while.
    Some outside domains are always slow. If you have many messages queued for such outside domains, they can involve the whole server, and cause mails to queue up behind them.
    Many installations create a new channel, such as, "tcp_slow", and use rewrite rules to move messages addressed to these domains (aol, hotmail, earthlink, etc.) into this separate channel. You can "tune" that channel differently, and messages there won't block tcp_local.

  • Messages are stuck in SMQ2

    Hi,
    Our messages are stuck in SMQ2, and I think this is due to high volume of messages. I have configured the IS to allow the QRF_RESTART_ALLOWED to 1, and scheduled the RSQIWKEX job to run periodically. But, the messages are still stuck in SMQ2.
    Does anyone know what are the next steps we should look into to solve this problem?
    Any help is greatly appreciated.
    Thanks,
    Karma

    Just try - go to SXMB_ADM->Manage Queues and Deregister all the Queues. Then go to SMQ2 and try to activate all the queues by selecting the each lines and with activate button.
    Then re-register the queues in SXMB_ADM and chek it..
    Problem may be because of workprocess related. Also check transaction ST22 for if any dump in XI box.
    btw what is the scenario ? Is it because of huge message processing ?
    Regards,
    Moorthy

  • Messages gets stuck up in active state

    Hi ,
    In our production environment, we are facing strange issues for the past 1 week.
    Issue 1:
    Messages gets stuck up in active state. In our message tracking mechanism ,the status is successfully sent to destination party. The message should not hold up in active state in first place?
    If we restart the Host instance, it is creating duplicate and processing it which is creating misssing ICR issue.
    Per day message flow-200 messages
    Please suggest ?
    Kind Regards,
    Giri.a
    girishkumar.a

    Hi Girish, 
    I believe OFTP adapter is not native adapter(in box) for BizTalk Server.
    So, is there any logging mechanism in OFTP adapter?
    Also, can we connect to the FTP server using some other tool like Filezilla etc. If other 3rd party products are also not able to connect to this server then we can say that its not a BizTalk issue.
    Thanks,
    Prashant
    Please mark this post accordingly if it answers your query or is helpful.

  • From time to time, my outgoing mail messages get stuck in the "outbox".  I'm having trouble resolving the problem.

    From time to time, my outgoing mail messages get stuck in the "outbox".  I'm having trouble resolving the problem.

    I use Comcast. My computer (Mac Air) also uses my iCloud and Me accounts. The message I get back says they are all offline.

  • HT4889 Source computer getting stuck on "looking for other computers", but target computer finds source computer.

    I'm hoping someone can help me get my source computer to find my target computer when running Migration Assistant.  The source computer (late '08 macbook pro running OS X 10.7.5) gets stuck on "looking for other computers".  But target computer (late '09 imac running OS X 10.7.5) finds source computer.  Both show they are connected to same wifi network in System Preferences-network.  Note:  I have tried with both internet sharing on and off.  Note:  Source computer also can't find its external hard drive when plugged in.  Related? Any ideas for either issue?

    Ok, more updates.
    In my old Mac (Pro) I have several hard drives installed. I was able to create a Time Machine back-up to a non-system HD. I plan on removing this volume and putting it in an external enclosure as soon as I can find the right cables for that enclosure. Meanwhile....
    I saw on one support doc an instruction to open Sharing on the source Mac (my old one, in this case) and make sure the machine had a name specified. I already had done that, but noticed that a specific name based on that was mentioned for other computers to contact it. For example, if my source machine is named "myOldMac", other computers could address is at "myOldMac.local".
    I connected the two computers directly via an Ethernet cable and I ran Migration Assistant again. When I got to the "Looking for source" screen, I clicked the button for "Other Server" and entered "afp://myOldMac.local". This actually found my old Mac. I was prompted to enter the password for the account "root". I changed the name to my account's short name -- "raboyle" not "Robert Boyle" -- and entered the correct password and I actually got a list of volumes to access. In the list were: the hard drives (by volume name), the home folders of the user accounts, and the Public Folders for each user account.
    I tried accessing both my boot volume and the home folder for my primary account, and proceeded to a screen with the following text: "Choose which backup to transfer information from:". The list provided, however, was empty. On the chance that it was looking specifically for a Time Machine backup, I then specifically chose the HD volume with the backup I had just created. Again, the list to choose where to grab my data from was empty.
    So, at least I'm advancing a little bit beyond the "Looking for source" screen ... but then again, since I hit yet another roadblock I can't say whether I've taken one step forward or two steps back.

  • My iphone 4s gets stuck on "searching" for network after it runs out of battery

    My iphone 4s gets stuck on "searching" for network after it runs out of battery , i have to restart my handset repeatedly till it gets network why is this ? 

    Hello Andres.J,
    Thanks for using Apple Support Communities.
    Take a look at the following article, specifically steps 3-7 since you have already restarted the iPhone.
    iPhone: Troubleshooting No Service
    http://support.apple.com/kb/TS4429
    Take care,
    Alex H.

  • My iTouch keeps getting stuck on "Waiting for changes to be applied"

    Hi, I just bought an iTouch 5 only 2 months ago and I'm having trouble because it won't sync my music. It keeps getting stuck on "waiting for changes to be applied." I have over 3000 songs and I have several playlists, it wouldn't sync all at once so I tried syncing it by playlist. It worked for a few songs and every time I add more, it just gets stuck. I've been trying to solve this for weeks now and it's stressing me out. I've read the stuff in this forum and I've tried people's solutions but I still haven't solved this problem.

    Why did you start a new discussion?
    https://discussions.apple.com/thread/6286849?tstart=0

  • Proxy messages are stucked in SMQ2.Can I pass these msgs in separate queue?

    Hi Guys,
    File >PI>ABAP proxy. (ECC)
    Once i pick and process the file, the resultant message is updating the table in ECC through ABAP proxy. These messages are high priority and they should not stuck in the queues in ECC.
    The problem is some of the messages of this interface are getting stucked in queues (SMQ2) by colliding with other low priority messages which are failed due to some data issues.
    Is there any way I can separate these high priority messages into separate custom queue and process them?
    Do I need to this in ECC or PI?
    Thanks
    Deepthi

    Hi,
         As Debashis has already said, use message prioritization in PI to handle your requirement.
    For SAP NetWeaver PI 7.0, navigate to SAP NetWeaver 7.0  SAP NetWeaver 7.0 Library  SAP NetWeaver Library  SAP NetWeaver by Key Capability  Process Integration by Key Capability  SAP NetWeaver Exchange Infrastructure  Runtime  Integration Engine  Prioritized Message Processing.
    For SAP NetWeaver PI 7.1 (including EHP 1), navigate to SAP NetWeaver  SAP NetWeaver PI/Mobile/IdM 7.1  SAP NetWeaver Process Integration 7.1 Including Enhancement Package 1  SAP NetWeaver Process Integration Library  Function-Oriented View  Process Integration  Integration Engine  Prioritized Message Processing.
    For more details about message prioritization within the Advanced Adapter Engine, please refer to SAP Help Portal http://help.sap.com, and navigate to SAP NetWeaver  SAP NetWeaver PI/Mobile/IdM 7.1  SAP NetWeaver Process Integration 7.1 Including Enhancement Package 1  SAP NetWeaver Process Integration Library  Function-Oriented View  Process Integration  Process Integration Monitoring  Component Monitoring  Prioritizing the Processing of Messages.

  • Proxy messages are stucked in SMQ2 as scheduled status

    Hi,
    I am doing File(FCC) >PI 7.0>ABAP proxy. (ECC) Scenario.
    Once i pick and process the file, the resultant message is updating the table in ECC through ABAP proxy. These messages are getting stucked in queues (SMQ2)  in ECC. My message is not having much data , it is very less in size.
    And there is no messages in Queue.
    I register all queues in SMQR in PI and ECC.
    Does I need to do any activity in ECC or PI? What could be a problem. Please suggest .
    Thanks
    Ayub

    Hi Venkata,
    Thanks for very quick replay.
    Are the messages stuck with any error?--> First I can see the Green Color Flag as scheduled status, I open the message I can see there is no error message.Bt when I have look at end of the message in SXMB_MONI at Q.Status , I can see Message Has error
    In SMQ2 -->
    Cl. Queue Name               Entries    Status   Date 1     Time 1   NxtDate           NxtTim                  Sender ID                        Wait for queue
    200 XBTR0009                         1  SYSFAIL  24.02.2012 10:53:34 24.02.2012 10:53:34      R3DEVQA_RDV_01
    And when I double click the XBTR009 I can see the below message :
    Cl.       User                  Function Module                 Queue Name                Date        Time                       StatusText
    200  ALEREMOTE    SXMS_ASYNC_EXEC                 XBTR0009                  24.02.2012  10:53:34  Screen output without connection to user.
    This are status of the messages. Please help me.
    Regards,
    Ahmed

  • Messages getting scheduled in SAP ECC Box:Messages getting stuck in Inbound

    The scenario is -
    JDBC Sender-->> SAP PI-->> ECC Server(via ABAP proxy)
    The Interface is running properly in SAP PI & then the messages are getting posted to the Inbound queues in SAP ECC Box. Generally it takes few seconds for the messages to get processed, but now all are getting scheduled in the Inbound queues(in different channels as seen in SMQ2)
    We re-ran the interfaces again a few times, but all of them kept getting scheduled. Finally, after 2 hours one of the messages got processed. I suppose we won't face any problem now onwards.
    Though I can see several suggestions like registering the queues & assigning dedicated queues to the interface, none of the blog suggest the probable cause of the event?
    Can this be due to some issue in the server(heavy pressure of data in the server during the period/issue in the queues??)
    I found the following links regarding issues like these --
    XML file getting stucked in queue in ECC
    Message in scheduled state
    Thanks

    Is the printing issue with one specific printer or across system.
    What method you have configured for output device.
    There should be any issue if you add spool work process to Application server.
    Then you should be able to configure spool server load balancing. (Search on help.sap.com for spool load balancing)

  • Messages getting stuck in Queue

    Hi All,
    In my scenario data is coming from database into XI and creating a file in SAP. The messages are getting stuck in the Queue and in message monitoring the status is showing as 'waiting'. Earlier the messages were getting successfully processed but system was running slow for the past two days. Is this because of system speed or some data issue?
    For testing pupose I have deleted the old messages from Smq2 and tried but every new message is getting stuck in the queue. Please suggest.
    Thanks,
    Aparna

    Please check the following blog :
    /people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework
    try cancelling oldest messages, this should unblock queue
    Regards,
    Jamal

Maybe you are looking for