MESSAGE_HANDLER values?
Hi All,
For my requirement I am using FM HR_ECM_GET_DATETYP_FROM_IT0041. In this MESSAGE_HANDLER (importing parameter) is obligatory.
What values does this parameter accept?
Thanks in advance.
Satish
Hello Satish
The interface IF_HRPA_MESSAGE_HANDLER is implemented by many classes yet I think the most appropriate one for you should be CL_HRPA_MESSAGE_LIST.
The sample report ZUS_SDN_ECM_GET_DATETYP_IT0041 shows you how to call the fm. It is not necessary to feed the IMPORTING parameter MESSAGE_HANDLER with an interface reference variable. Any implementing class will be accepted.
Within fm HR_ECM_GET_DATETYP_FROM_IT0041 -> HR_ECM_READ_INFOTYPE -> HR_ECM_ADD_MESSAGE the error messages are added to the message handler. I simulated this by setting
missing_auth = 'X' " in debugging mode
within fm HR_ECM_READ_INFOTYPE.
*& Report ZUS_SDN_ECM_GET_DATETYP_IT0041
*& Thread: MESSAGE_HANDLER values?
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="596748"></a>
REPORT zus_sdn_ecm_get_datetyp_it0041.
DATA: "gif_msg_handler TYPE REF TO if_hrpa_message_handler,
go_msg_list type ref to cl_hrpa_message_list.
data: gt_messages type HRPAD_MESSAGE_TAB.
PARAMETERS:
p_pernr TYPE pernr_d DEFAULT '00001402',
p_keydt TYPE datum DEFAULT syst-datum,
p_datar TYPE datar DEFAULT '01'.
START-OF-SELECTION.
BREAK-POINT.
CREATE OBJECT go_msg_list.
"gif_msg_handler = go_msg_list.
CALL FUNCTION 'HR_ECM_GET_DATETYP_FROM_IT0041'
EXPORTING
pernr = p_pernr
keydt = p_keydt
datar = p_datar
message_handler = go_msg_list " gif_msg_handler
* IMPORTING
* DATE =
* IS_OK =
BREAK-POINT.
TRY.
CALL METHOD go_msg_list->get_message_list
IMPORTING
messages = gt_messages.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
EXPORTING
I_STRUCTURE_NAME = 'HRPAD_MESSAGE'
I_GRID_TITLE = 'Message List'
* IS_LAYOUT_LVC =
* IT_FIELDCAT_LVC =
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
TABLES
t_outtab = gt_messages
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CATCH cx_hrpa_violated_assertion .
ENDTRY.
END-OF-SELECTION.
Regards
Uwe
Similar Messages
-
To pass the values in repetitive structures any function module
hi all,
Is there any function module to pass the values in repetitive structures like infotype 0041(Date spcification). I heard there is a function module, so any of you can tell that function module.
thanks,
sekhar.Hi Chandra,
If your question is to find a date for a given dar value in IT 0041 then this is the sol:
Yes there is a function Module for IT0041, HR_ECM_READ_IT0041_DATE_TYPE
eg:
INFOTYPES: p0041.
DATA: lv_msg TYPE REF TO if_hrpa_message_handler,
lv_date TYPE D.
GET pernr.
CLEAR: lv_date.
CALL FUNCTION 'HR_ECM_READ_IT0041_DATE_TYPE'
EXPORTING
datar = 'U2' " specify the value of the dar value, for which u have to find date
p0041 = p0041
message_handler = lv_msg
IMPORTING
date = lv_date.
For the dar value U2, lv_date will have the corresponding date.
Hope this will clear your doubt.
Thanks,
Kishore -
Get all values from request.getParameter
In ASP, I can do something like that...
For each item in Request.Form
Response.write "Name is:" & item & " value is:" & Request(item)
Next
How about in JSP? How do i get the names and values of the form using a loop?You can use request.getParameterNames() which will return an enumeration, then you can iterate through the enumeration and use request.getParameterValue(String paramName) method to get the values.
-
Error while assigning a character value to a numeric variable.
I fire a sql statement and check the number of rows returned by the sql.
I check this result with the application logs.
The application logs keeps the sqls fired by the application and the no of rows returned, in the example below the sql returned 8454 rows.
My script compares the two results.
***********Application Log***********
4/14/2008 11:15:01 AM: 0059 SQL SELECT "CLUSTER_CD",
4/14/2008 11:15:01 AM: 0060 "PRODUCT_DESC",
4/14/2008 11:15:01 AM: 0061 "TEAM_CD"
4/14/2008 11:15:01 AM: 0062 FROM "OPS$TMS"."MAP_CLUSTER_TEAM_PROD"
4/14/2008 11:15:01 AM: 3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD, 8,454 lines fetched
***********Application Log***********
My script:
#!/bin/ksh
typeset -i resA
typeset -i resB
opstms_conn_string="abc/[email protected]"
set `sqlplus -s $opstms_conn_string << EOF
set pages 0
WHENEVER SQLERROR CONTINUE
SELECT count(*)
FROM MAP_CLUSTER_TEAM_PROD;
exit
EOF`
resA=$1 ##returns 8454
resB=`grep '3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD,' BCVP_Main_Loader.qvw.log | awk '{print $10}'`
##resB returns 8,454
## here i get syntax error
if [ $resA -eq $resB ]; then
echo "QA passed for sql1"
else
echo "QA failed for sql1"
fi
The problem is as resB is integer variable it does not accept character value: 8,454 so returns a syntax error:
How do I change the value assigned to resB into a numeric variable?
error:
+ grep 3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD, BCVP_Main_Loader.qvw.log
run.ksh[52]: 8,454: syntax errorChange:
resB=`grep '3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD,' BCVP_Main_Loader.qvw.log | awk '{print $10}'`
to this:
resB=`grep '3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD,' BCVP_Main_Loader.qvw.log | awk '{print $10}' | tr -d ,`
to drop the comma. Or you could do it in awk(1):
resB=`grep '3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD,' BCVP_Main_Loader.qvw.log | awk '{ gsub( /,/, "", $10 ); print $10}'`
Or you could to it all in awk(1):
resB=`awk '
/3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD/ {
gsub( /,/, "", $10 )
print $10
' BCVP_Main_Loader.qvw.log`
(This example was not tested, it's just for a model.)
Someone more of an SQL guru than I can probably tell you how to change your numeric locale to avoid presenting those commas in the first place and avoid the problem.
HTH -
Issue in Creation of new Value Field in CO-PA
Hi,
I have a query in CO-PA Value Field Linking.
In my Development Client,
1. Created a New Value Field (No Transport Request Generated)
2. Linked to the above to new Conditon type created in SD. (Tranport request was generated) i.e. in Flow of Actual Values->Transfer of Billing Documents->Assign Value Fields
However then i try creating a new Value Field in my Production Client it throws a message 'You have no authorization to change Fields".
Is this an issue with authorization or i need to transport the Value field too from Development to Production client.
Please Advise.
Thanks in Advance,
SafiThanks Phaneendra for the response.
The creation of Value field did not create any tranportation request. Will this too be transported if i transport the Operating Concern.
Please Advise.
Thanks,
Safi -
Query help : Query to get values SYSDATE-1 18:00 hrs to SYSDATE 08:00 hrs
Hi Team
I want the SQl query to get the data for the following comparison : -
Order Created is a Date Column , and i want to find out all the values from (SYSDATE-1) 18:00 hours to SYSDATE 08:00 hours
i.e.
(SYSDATE-1) 18:00:00 < Order.Created < SYSDATE 08:00:00.
RegardsHi, Rohit,
942281 wrote:
If i want the data in the below way i.e.
from (SYSDATE-1) 18:00 hours to SYSDATE 17:59 hours ---> (SYSDATE-1) 18:00:00 < Order.Created < SYSDATE 07:59:00.If you want to include rows from exactly 18:00:00 yesterday (but no earlier), and exclude rows from exatly 08:00:00 today (or later), then use:
WHERE ord_dtl.submit_dt >= TRUNC (SYSDATE) - (6 / 24)
AND ord_dtl.submit_dt < TRUNC (SYSDATE) + (8 / 24)
So can i use the below format : -
ord_dtl.submit_dt BETWEEN trunc(sysdate)-(6/24) and trunc(sysdate)+(7.59/24) . Please suggest . .59 hours is .59 * 60 * 60 = 2124 seconds (or .59 * 60 = 35.4 minutes), so the last time included in the range above is 07:35:24, not 07:59:59.
If you really, really want to use BETWEEN (which includes both end points), then you could do it with date arithmentic:
WHERE ord_dtl.submit_dt BETWEEN TRUNC (SYSDATE) - (6 / 24)
AND TRUNC (SYSDATE) + (8 / 24)
- (1 / (24 * 60 * 60))but it would be simpler and less error prone to use INTERVALs, as Karthick suggested earlier:
WHERE ord_dtl.submit_dt BETWEEN TRUNC (SYSDATE) - INTERVAL '6' HOUR
AND TRUNC (SYSDATE) + INTERVAL '8' HOUR
- INTERVAL '1' SECONDEdited by: Frank Kulash on Apr 17, 2013 9:36 AM
Edited by: Frank Kulash on Apr 17, 2013 11:56 AM
Changed "- (8 /24)" to "+ (8 /24)" in first code fragment (after Blushadown, below) -
Unable to capture return values in web services api
At the time of login to web services if my server is down ,
it returns following error :
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java:1438)
at java.lang.String.substring(String.java:1411)
I want to capture this error so that i can try another server to login. how do i capture this error
Another place where i want to capture the return Value is when i look for a report on the server
rh = boBIPlatform.get("path://InfoObjects/Root Folder/"src_folder"/" + reportName +
"@SI_SCHEDULEINFO,SI_PROCESSINFO" ,oGetOptions);
oInfoObjects = rh.getInfoObjects();
CrystalReport = (CrystalReport)oInfoObjects.getInfoObject(0);
Here if the report is not there on the server , it returns a null handler exception.
but if i try catching it by checking my responsehandler is null like rh == null it does not catch it.
Any help will be appreciated
thanks
Rakesh GuptaTed : i have two cases
1) server = server_st.nextToken();
providerURL = "http://"server"/dswsbobje/services";
sessConnURL = new URL(providerURL + "/session");
Connection boConnection = new Connection(sessConnURL);
Session boSession = new Session(boConnection);
EnterpriseCredential boEnterpriseCredential = new EnterpriseCredential();
boEnterpriseCredential.setLogin(userid);
boEnterpriseCredential.setPassword(pwd);
boEnterpriseCredential.setAuthType(auth);
SessionInfo boSI = boSession.login(boEnterpriseCredential);
I have got a list of servers running web servcies stored in my tokens. when i pass the first server name say " test:8080" and that server is down , i want to catch somewhere in the code above that it did not get the connection so that i can loop back and try with the second server say test1:8080
This is for failover purposes.
at present when i was trying to capture return value of boSI it breaks giving the error
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java:1438)
at java.lang.String.substring(String.java:1411)
2nd case :
I am geeting reports from the server and scheduling them:
i run the following code which works fine if reports is there
rh = boBIPlatform.get("path://InfoObjects/Root Folder/"src_folder"/" + reportName +
"@SI_SCHEDULEINFO,SI_PROCESSINFO" ,oGetOptions);
oInfoObjects = rh.getInfoObjects();
CrystalReport = (CrystalReport)oInfoObjects.getInfoObject(0);
Here if the report is not there on the server then i should be able to catch from the response handle rh that it has got a null value.
but rh does not return a null value
the code ultimately throws a null handle at the following line
CrystalReport = (CrystalReport)oInfoObjects.getInfoObject(0);
i am not able to catch the null value there also.
hope you got my issue. -
Unable to capture the parameter values from a PL/SQL procedure
hi.
i'm trying to capture the parameter values of a PL/SQL procedure by calling inside a anonymous block but i'm getting a "reference to uninitialized collection error" ORA-06531.
Please help me regarding.
i'm using following block for calling the procedure.
declare
err_cd varchar2(1000);
err_txt VARCHAR2(5000);
no_of_recs number;
out_sign_tab search_sign_tab_type:=search_sign_tab_type(search_sign_type(NULL,NULL,NULL,NULL,NULL));
cntr_var number:=0;
begin
rt843pq('DWS','3000552485',out_sign_tab,no_of_recs,err_cd,err_txt);
dbms_output.put_line('The error is ' ||err_cd);
dbms_output.put_line('The error is ' ||err_txt);
dbms_output.put_line('The cntr is ' ||cntr_var);
for incr in 1 .. OUT_SIGN_TAB.count
loop
cntr_var := cntr_var + 1 ;
Dbms_output.put_line(OUT_SIGN_TAB(incr).ref_no||','||OUT_SIGN_TAB(incr).ciref_no||','||OUT_SIGN_TAB(incr).ac_no||','||OUT_SIGN_TAB(incr).txn_type||','||OUT_SIGN_TAB(incr).objid);
end loop;
end;
Error is thrown on "for incr in 1 .. OUT_SIGN_TAB.count" this line
Following is some related information.
the 3rd parameter of the procedure is a out parameter. it is a type of a PL/SQL table (SEARCH_SIGN_TAB_TYPE) which is available in database as follows.
TYPE "SEARCH_SIGN_TAB_TYPE" IS TABLE OF SEARCH_SIGN_TYPE
TYPE "SEARCH_SIGN_TYPE" AS OBJECT
(ref_no VARCHAR2(22),
ciref_no VARCHAR2(352),
ac_no VARCHAR2(22),
txn_type VARCHAR2(301),
objid VARCHAR2(1024))............We don't have your rt843pq procedure, but when commenting that line out, everything works:
SQL> create TYPE "SEARCH_SIGN_TYPE" AS OBJECT
2 (ref_no VARCHAR2(22),
3 ciref_no VARCHAR2(352),
4 ac_no VARCHAR2(22),
5 txn_type VARCHAR2(301),
6 objid VARCHAR2(1024))
7 /
Type is aangemaakt.
SQL> create type "SEARCH_SIGN_TAB_TYPE" IS TABLE OF SEARCH_SIGN_TYPE
2 /
Type is aangemaakt.
SQL> declare
2 err_cd varchar2(1000);
3 err_txt VARCHAR2(5000);
4 no_of_recs number;
5 out_sign_tab search_sign_tab_type:=search_sign_tab_type(search_sign_type(NULL,NULL,NULL,NULL,NULL));
6 cntr_var number:=0;
7 begin
8 -- rt843pq('DWS','3000552485',out_sign_tab,no_of_recs,err_cd,err_txt);
9 dbms_output.put_line('The error is ' ||err_cd);
10 dbms_output.put_line('The error is ' ||err_txt);
11 dbms_output.put_line('The cntr is ' ||cntr_var);
12 for incr in 1 .. OUT_SIGN_TAB.count
13 loop
14 cntr_var := cntr_var + 1 ;
15 Dbms_output.put_line(OUT_SIGN_TAB(incr).ref_no||','||OUT_SIGN_TAB(incr).ciref_no||','||OUT_SIGN_TAB(incr).ac_no||','||OUT_SIGN
TAB(incr).txntype||','||OUT_SIGN_TAB(incr).objid);
16 end loop;
17 end;
18 /
The error is
The error is
The cntr is 0
PL/SQL-procedure is geslaagd.Regards,
Rob. -
Unable to capture field values in Master agreement Line Items
I am trying to get the field values from master agreement line items page. I have written the following code to get the line item details which is working fine to capture part number and quantity->
agreementBean = doc.getRootParentIBean();
lineItemCollection = agreementBean.getLineItems();
collectionsize = lineItemCollection.size();
for(i=0;i<collectionsize;i++){
collectionbean = lineItemCollection.get(i);
partNum = ""+collectionbean.getPartNumber() ;
Quantity = ""+collectionbean.getQuantity();
throw doc.createApplicationException(null,partNum + " , " + Quantity );
Now, my problem is that I am unable to capture the following field item values in the master agreement > line items page.
1. Price Unit
2. Unit Price
3. Product Category
4. Plant
Please help me to find the values.
Thankx in Advance.
Su
Edited by: subrataindra on Aug 10, 2010 11:11 AMThis will return the name of the plant.
.getExtensionField("PLANT").get().getDisplayName(session);
Check if this returns the product category
collectionbean.getExtensionField("ITEM_CAT").get().getDisplayName();
This will Return the Price
collectionbean.getExtensionField("PRICE").get().getPrice();
(return type :BigDecimal)
This will return the currency
collectionbean.getExtensionField("PRICE").get().getCurrency;
(Return type:String)
Similarly to retrieve other fields for which there are no standard functions, use .getExtensionField("Field ID")
Hope this helps
Regards,
Immanuel -
Unable to capture value inside parameter T_LFBK of FK03 in display mode
Hi Experts,
I have to trigger a mail whenever there is a change in fields that are captured in parameter t_ffbk.
However i am unable to capture the the screen values for this parameter as FK03 is in display mode.Please tell me how can i capture the screen field values in parameter T_LFBK.
<Point offer removed by moderator>
Thanks in advance.
Edited by: Vinod Kumar on Jul 28, 2011 5:48 PMHi Experts,
I have to trigger a mail whenever there is a change in fields that are captured in parameter t_ffbk.
However i am unable to capture the the screen values for this parameter as FK03 is in display mode.Please tell me how can i capture the screen field values in parameter T_LFBK.
<Point offer removed by moderator>
Thanks in advance.
Edited by: Vinod Kumar on Jul 28, 2011 5:48 PM -
Unable to capture Input field value on BSP page
Hi
I have copied ROS (SRM) standard application ROS_PRESCREEN3 into custom and added one input field .
Now when user enters some value in it , i am not able to get that value in my back-hand code.
I have treid the availble code on Fourm , its not working .
Regards
RaulHi ,
I am getting the input field values in my back hand using MVC .
Regards
Raul -
Sy-tabix value has changed...
Hi Gurus,
I am using a code like dis...this is not the actual code m using instad m sendin u a sample program so that u can understand the problem
There is a selecvtion for Customer.
sort itab by kunnr.
loop at itab.
on change of itab-kunnr.
wkunnr = itab-kunnr.
read table zitab with key kunnr = itab-kunnr.
endon.
if itab-kunnr = wkunnr.
wdmbtr = wdmbtr + itab-dmbtr.
endif.
at end of kunnr.
ftab-kunnr = wkunnr.
ftab-dmbtr = wdmbtr.
append ftab.
endat.
endloop.
Now my problem is that AT END OF Kunnr is working fine for the first customer or say for single customer but when there are multiple customers AT END OF kunnr is triggring for each entry.......
In debug MOdei can see that as soon as read table syntax is used the tabix value is changed....
So Can anyone suggest what is the solution....
Regards,
RamanThis is the Declaration
DATA: BEGIN OF ITAB OCCURS 0,
KUNNR LIKE BSID-KUNNR,
BELNR LIKE BSID-BELNR,
BUKRS LIKE BSID-BUKRS,
GJAHR LIKE BSID-GJAHR,
BUZEI LIKE BSID-BUZEI,
SHKZG LIKE BSID-SHKZG,
VALUT LIKE BSID-ZFBDT,
SGTXT(70) TYPE C,
ZFBDT LIKE BSID-ZFBDT,
ZBD1T TYPE BSID-ZBD1T,
ZBD2T TYPE BSID-ZBD2T,
ZBD3T TYPE BSID-ZBD3T,
REBZG TYPE BSID-REBZG,
NETDT TYPE BSID-BUDAT,
ZUONR LIKE BSID-ZUONR,
BLART LIKE BSID-BLART,
DMBTR LIKE BSID-DMBTR,
SPART TYPE VBRK-SPART,
DAY TYPE RFPOSX-VERZN,
FLAG TYPE C,
CITY TYPE KNA1-ORT01,
NAME1 TYPE LFA1-NAME1,
CR_DR1(4) TYPE C,
PSWSL LIKE BSID-PSWSL,
ZTERM LIKE BSID-ZTERM,
VBELN LIKE BSID-VBELN,
UMSKZ LIKE BSID-UMSKZ,
KLIMK LIKE KNKK-KLIMK,
VTEXT LIKE TVZBT-VTEXT,
ADV LIKE BSID-DMBTR,
REBZT TYPE BSID-REBZT,
XBLNR LIKE BSID-XBLNR,
VTEXT1(70) TYPE C,
FKLIMK LIKE KNKK-KLIMK,
ABC(4) TYPE C,
AGRO(4) TYPE C,
BIO(4) TYPE C,
SKFOR LIKE KNKK-SKFOR,
SSOBL LIKE KNKK-SSOBL,
CTLPC LIKE KNKK-CTLPC,
OEIKW LIKE S066-OEIKW,
OLIKW LIKE S067-OLIKW,
OFAKW LIKE S067-OFAKW,
NAME1 LIKE LFA1-NAME1,
BUDAT LIKE BKPF-BUDAT,
D_DMBTR LIKE BSID-DMBTR,
S_DMBTR LIKE BSID-DMBTR,
VORGN LIKE BSEG-VORGN,
WERKS LIKE BSEG-WERKS,
NAMESO LIKE KNA1-NAME1,
NAMEAM LIKE KNA1-NAME1,
NAMERM LIKE KNA1-NAME1,
NAMEDR LIKE KNA1-NAME1,
END OF ITAB. -
SY-TABIX value of a loop in other loop in other loop.
Hello Gurus,
I have a problem i want to modify some columns in final internal table and it is possible by using Transporting and Index but when i see SY-TABIX value it is not really giving particular loop iteration value. Because my present loop is in another loop and it is in another loop. Please gurus help me out
or
How to Insert particular filed columns and how to use where clause in insert..
Thanks.Hi !
Here are things you could do:
1. You can use nested loops with the WHERE statement on the inner loop. But this can be slow.
This will look like this
loop at i_tab1 into wa1
loop at i_tab2 into wa2 where cond1 = wa1-cond1....
( move wa2-field3 to wa1-field3.....)
modify i_tab1.
endloop.
endloop.
2. You can use the parallel cursor technique as suggested above.
This technique speeds up processing of data significantly. Here it is:
data lv_tabix type i.
sort i_tab1 by field1 ascending.
sort i_tab2 by field1 ascending.
loop at i_tab1 into wa1
read table i_tab2 transporting no fields with key cond1 = wa1-cond1 binary search.
lv_tabix = sy-tabix.
loop at i_tab2 into wa2 from lv_tabix.
if wa2-cond1 <> wa1-cond1.
exit.
endif.
( move wa2-field3 to wa1-field3.....)
modify i_tab1.
endloop.
endloop.
Please let me know if you want more explanation -
What the Initial value for sy-tabix & sy-index
Hi Folks
I have a small doubt.
What the Initial value for sy-tabix & sy-index?
Can anyone please clarify me?
Regards,
Sreehi sree,
both values are initialized to 0 before processing and after processing values are changed according to used scenarios.
if helpful reward some points.
with regards,
suresh babu aluri. -
Text value is not getting displayed in Query designer !!
Dear experts..,
i have created a new query in query designer using my info provider and then selected one field in default value and then trying to restrict that particular field while selecting the restriction in query designer am getting the exact text value but after generating the report instead of text value , key value is getting displayed....so how can i get text instead of key value??
please help me friends....
i have posted in OSS mesage also...i got a reply like...even i didnt understand his reply too...what he is trying to say?
whether can i get text display or not???
can any one help me in this regard???
SAP Reply----
Hello kumar,
After another analysis I have to inform you about general concept of
"compounded characteristics".
A compounded characteristic bounds two characteristics. The technical
name is generated by both technical names of the two characteristics
combined by two underlines "__".
An individual text is only available for one single combination of both
characteristics.
Example:
=======
Compounded characteristic "Famous family name" is a combination of
characteristic "COUNTRY" & "ETHNIC". Technical name: COUNTRY__ETHNIC
Values for Country: USA, Australia
Values for Ethnic: Asian, Latino
Possible value combinations with individual text:
USA & Asian; text: "Ling"
USA & Latino; text: "Sanchez"
Australia & Asian; text: "Chu"
Australia & Latino; text: "Garcia"
(Keep in mind the individual text only valid for the specific
combination.)
In analogy to the issue that you reported, you want to restrict this
compounded characteristic. In the window where you select the restrictedvalue (called Selector) you'll see on the left hand side all available
combinations of the characters with an individual text.
You select family name "Chu" and drag'n'drop it to the right side.
Actually you can only restrict the right compounded characteristic. In
our example you would restrict on characteristic "ETHNIC" with value
"Asian". (When you switch on technical names this comes more clear). Thetext "Chu" is displayed in the context of Selector because you selected
value combination Australia & Asian. But in the end it's just a
placeholder(!) for any combination of characteristic "ETHNIC" and value
#Asian#; in our example it could be USA & Asian "Ling" or Australia &
Asian "Chu").
By leaving the Selector the individual text is gone because now the
context is lost between the two characteristics. You have just a
restriction on characteristic "ETHNIC" with value "Asian". An individualtext can't be displayed because the compounded characteristic is not
specified for this restriction.
You're right, it is confusing when "loosing" the text of a restriction.
But accoring to the concepts of the compounded characteristics it
is a correct behavior.Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi
Maybe you are looking for
-
"bc4j.xcfg" file not in classpath (and not in JAR file)
Hi, this is a very similar problem to one reported today. I have created a JClient application that connects to a DB and displays some info in a JFrame. Running the application through JDeveloper, all is fine. But, if I create a jar file and run it d
-
Issue in Setting up MySQL DB with ATG 10.0.3
Hi All, I am facing the below issue while setting up the MySQL DB with the ATG 10.0.3 version. **** Error Thu Aug 30 23:45:25 CDT 2012 1346388325927 /atg/dynamo/service/jdbc/JTDataSource an exception was encountered while trying to populate the pool
-
How to Free up Disk Space to export from Final Cut Pro to QuickTime?
I am using Final Cut Pro on a Mac OX10. When I try to export a Final Cut Pro project to QuickTime I get a message saying that I do not have enough disk space available. How do I free up additional disk space? (I am a little confused because I have al
-
1440x900 resolution missing in Bootcamp (MBPr+Retina)
I just installed Windows 8 RP on my new MacBook Pro with Retina display and realized that the 1440x900 resolution option is completely missing from Windows (and games). I've tried installed NVIDIA's latest 650M beta drivers (304.79), but they refuse
-
Pls Help!! From my Java application I have launched a browser window displaying a HTML page. The page have a text field with the cursor in it. Now from my Java application I would like to enter value in the text field. In other words, I don't want to