Message if Expiry date of Master Test Equipment is in the Past

Hi All,
We need system give a mesage when expiry date of master test equipment (which is assigned as a PRT in the equipment task list) is in the Past at the time of result recording of an Equipment.
Problem Details:-
Master test equipment is defined in equipment category "P".
Expiry date of master test equipment is maintained in the field
of "start up date" in General Tab
2.Equipments is defined in equipment category "Q"
3.A task list is created in which master test equiment is assigned as a PRT
4.Maintenance plan is created in which equipments is assigned & task List is selected
5.Inspection lot is generated when maintenance plan is schedule & released.
At the time of Calibration result recording "We want the system to give a message when expiry date (entered in start up date filed on master equipment master view) of master test equipment is in the past"
The end date in equipment master data cannot be altered and
Hence we have used the "start up date" field for the equipment expiry date.
Pl assist me for solving this issue.
Thanks & Regards,
SKD

hi shiv
Start up date is the date at which the equipment is commisioned or the equipment starts working,it is not the expiry date
start up date is mainly used for calculating the MTTR/MTBF of the equipment
regards
thyagarajan

Similar Messages

HT3529 I am confused about messaging. Shouldn't I be able to send and receive messages with cellular data off? I can usually send the message, but often do not receive messages until I either have wifi or turn cellular on.

I am confused about messaging. Shouldn't I be able to send and receive messages with cellular data off and without wifi? I can send the message but often do not receive messages from others, iPhone or other, until I turn on cellular or wifi.

Depends on the type of Message.
SMS messages will send and receive with data off. and while you can guarantee you send using SMS you cannot guarantee that whoever replies to you does also. They may be replying thorugh iMessage if they are using iPhones.
However Android should be sending through SMS.
You can turn off iMessage if you want to, though people with limtied SMS text messaging in their plans may not appreciate it, and stop messaging you.

When you try to send or to receive email in Outlook 2010, you may receive one of these error messages: 0x8004010F: Outlook data file cannot be accessed. or 0x8004010F: The operation failed. An object could not be found.

0x8004010F: The operation failed. An object could not be found.
1. reviewed Profile instructions
2. Ran SytTools thinking it would fix the error. NO although I could send received I ended up with a giant pst
3. Back to Profile Instructions.
4. Set up new profile with my email address. email address tested well. Run Outlook. loads as outlook data PST
and gmail address PST. Deleted all the Gmail subscriptions to improve speed. Original error was gone but have two GIGANIC PST FILES.
5. Set up another new profile with my email address and a named pst. Run Outlook under that Profile -
comes up with newly named pst and the gmail addrress pst (although I can't figure out where that pst is located. Will not let me use email address as default Profile. Tried different approaches and still ended up always with the gmail address pst. Deleted
all profiles but email address and comes up.
6. Should I just go ahead and use the gmail address pst I need to import data or download data from gmail
to get last years correspondence.e
7. Outlook is my lifeblood, I am in communications and every submitted email gets moved to a file with an update.
Help?
8. One option is to merge psts but might make worse mess.
Thanks. Beautiful Beach weather here!

To resolve error 0x8004010F , identify the current location of your default Outlook data file, and then create a new Outlook profile.
Step 1- Locate the default Outlook data file
Click Start, and then click Control Panel.
In Control Panel, click Mail.
In the Mail Setup - Outlook dialog box, click Show Profiles.
Select your current Outlook profile, and then click Properties.
In the Mail Setup - Outlook dialog box, click Data Files.
Select the Data Files tab in the Account Settings dialog box, and then note the name and location of the default data file for your profile (a check mark will denote the default data file).
Click Close.
Step 2 - Create a new Outlook profile
Step 3 - Configure your new Outlook profile as the default profile
More detailed steps you can refer to this KB article:
http://support.microsoft.com/kb/2659085

Project expiry date message field - Adobe Captivate 7

Hi,
The 'project expiry date' feature is really useful, but lacks the facility to define the message window size. The message field allows you to input a large amount of characters but the output within the expired project is around 40.
Surely this should allow for at least a basic message to convey that the project has expired and what to do to extend it? Even better would be to allow text formatting too.
Also, having entered text into the message field, saving, closing, and opening again to edit, it doesn't seem to retain changes made.

I started with Captivate 5 then 5.5, 6 etc. Now I am on 8. Every time I switch versions I found the best way to convert a project is to Copy the slides from the old project to a new project. So create a new File on CP 8 and paste all the slides from your earlier version CP 7. It might be time consuming but I never had a problem. Also it is a very good practice to make sure in your preferences you tick the box Generate Project Backup (hours of work can be lost if not).

Report with expiry date.

In MB51, I cannot find the expiry date for the batch.
Is there any report where I can find list of batch with PO and also the expiry date?
Please advice.

HI,
MB5M is the perfect report as suggested by jurgen.The criteria is, in Material master the plant data
storage view u have give the shelf life.It will work perfectly.Pl try.Give shelf life as one for the
material .Goto MSC2N and change the manfactured as 17/06/09 and press enter .The expiration date
will be calculated automatically by the system.Now goto MB5M the system will dislay the shelf life
expiration date.
Is there any report where I can find list of batch with PO-For this u can use MB51 report
regards
murugan
Edited by: Murugan mgl on Jun 19, 2009 6:16 AM

How to set expiry date for a mail account?

Hi there, i'm new in Messaging Server, need help here on how to set an expiry date to a specific mail user since the mail user will be just a temporary mail user. Instead of deleting manually, is there any smarter way of doing it?

Directory Server can be set to exipre a password, indeed. That will prevent the user from logging in, when it happens. There will be no warning, or anything like that.
The account will still be on the server, and the mailbox will still contain mail. It will still receive mail.
If you want to turn an account off, you will have to make some arrangement outside Messaging Server for automating it.
You can use any kind of program you like to set the ldap attribute "mailuserstatus" to "inactive", or even "deleted" as you wish.
You can use java, "c", or any other programming tools you like. Messaging Server and Directory Server aren't written in Java, anyway.

Same Batch with different expiry dates

Dear all,
My vendor produced the same batch Y28 at an interval of 3 days eg 10/10/2008 , 11/10/2008, 12/10/2008 with an expiry date of 1year.
He sent in the batch Y28 to me with the following expiry date 10/10/2009, 11/10/2009 and 12/10/2009.
During GR, I need to enter the expiry date. However, I realised that the Batch Master for the same batch can only have 1 expiry date. I end up with the latest expiry date of 12/10/2009.
Could anyone advise on how the above scenario sould be handled?
Can I maintain 3 different expiry date for the same batch?
Is it a norm that the same batch can have different expiry date?
Thank you

You should create a separate batch per day, if you really think that the exact date of expiry matters for a material that has a shelf life of one year.

Error while result recording for test equipment

Dear Gurus
My scenario is to do unplanned maintenance for test equipment and recording the result.
For that I have done the following steps
1)     Created Notification for the test equipment (customized notification type TE).
2)     For that notification I created order. (customized order type TE01).
3)     Attached General maintenance task list for that order. Task list has inspection point 300.
4)     Released the order and saved. Inspection Lot is created.
5)     In QE51N / QA32 when I tried to do results recording, it shows the following error.
"Equipment VERN01 do not exist in the object list for order 4001214"
Please help me to correct this error.
Regards
Babu R

Hi
I applied oss and today I got reply. When 1278254 notes is implemented it is solved.
I have one more question, now in QE51N, I did result recording and when saved it is asking for order confirmation, I have given all data and came back to the same screen. There is one more option for Valuate Inspection Point. In that I have selected Can be used option and saved. Now if I goto maintenance order and TECO the order, it is saying that A usage decision has stll to be made.
Whether I want to take UD once again in QA32 ?
Also is there any settings to TECO the notification automatically when the maintenance order is TECO'ed. Now the notification is not TECO'ed when order is TECO'ed.
Babu R

Message when no data found in set block property

hi,
ı use oracle forms 10.1. when ı use the code below
SET_BLOCK_PROPERTY('MY_BLOCK', DEFAULT_WHERE,     'YEAR=2012') ;
EXECUTE QUERY;
if there is records for year 2012 it works fine. Bu if there exists no record ı get message saying no data found. And then it clears the block. I want to clear block with no messages.
is it possible? thanks...

Yes. you can add your own message on form level. User ON-MESSAGE trigger and write down the given code :-
DECLARE
msgnum NUMBER       := MESSAGE_CODE;
msgtxt VARCHAR2(80) := MESSAGE_TEXT;
msgtyp VARCHAR2(3) := MESSAGE_TYPE;
ALERT_BUTTON Number;
BEGIN
IF msgnum = 40301 then
--HERE YOU CAN WRITE ONLY NULL-------
/* SET_ALERT_PROPERTY('ALERT_OK',ALERT_MESSAGE_TEXT,'There are No records available for the Query selected by you !!! ');
         ALERT_BUTTON := SHOW_ALERT('ALERT_OK');
         RAISE FORM_TRIGGER_FAILURE; */
null;
Elsif msgnum = 40355 then
          SET_ALERT_PROPERTY('ALERT_OK',ALERT_MESSAGE_TEXT,msgtxt);
         ALERT_BUTTON := SHOW_ALERT('ALERT_OK');
         RAISE FORM_TRIGGER_FAILURE;
Elsif msgnum = 40657 then
          SET_ALERT_PROPERTY('ALERT_OK',ALERT_MESSAGE_TEXT,msgtxt);
         ALERT_BUTTON := SHOW_ALERT('ALERT_OK');
         RAISE FORM_TRIGGER_FAILURE;
elsif msgnum = 40400 then
          message('Operation completed Successfully');
END IF;
END;

Does the CreatePDF online service allow you to place an expiry date on a document ?

Does the CreatePDF online service allow you to:
1) Place a non-removable expiry date on a PDF ?
2) Force the user to view the PDF online without being able to download the file ?

Hi, uihdff.
1) No, the CreatePDF service does not have this functionality. If you'd like to see this functionality in the future, please add it to our Ideas page: http://forums.adobe.com/community/createpdf?view=idea
2) After you create the PDF, you may view the PDF online (in your CreatePDF file list). Or you may download the PDF to your computer.
Let us know if you have additional questions.
Dave

HT1918 i don't understand why i cannot purchase anything using my Mastercard. Each time i enter the card expiry date, it will show an error.

Last time i usually pay the purchasing item using my debit visa card.
after that i no more use the debit visa card.
i'm using mastercard.
now each time i want to purchase anything, i cannot pay using the mastercard.
when i insert all the details including the expiry date, apple will show an error. only the expiry date.
i don't understand why.

Does it have to be an applet?
If you want the same behaviour as in the code with traffic lights, change
class MortgageApplet extends JApplet implements ActionListener {
to
class MortgageApplet extends JFrame implements ActionListener {
and change
public void init() {
to
public MortgageApplet() {

Test Equipment Management in BPR

Hi,
I am current setting up BPS for our company, and I am having some difficulties finding Scenarios, Processes, and Process Steps for Test Equipment Management in the BPR.
Any suggestions?
BR
Bendt Bendtsen

Dear friend
If you goto Organizational area wise
Coorporate Support & Services
Business Processes->Test Equipment Management
Hope it solves ur query.
Regards
Prakhar

Update secure zone expiry dates with an import

We are trying to update Secure Zone Expiry dates for customers via an import but the problem is when we create a report for Users and Secure Zones there is no field for 'Username' and from what I understand if we leave this blank when importing then the information will be deleted.

What a process this has been! Has anyone else found it difficult or is it just me?
Maybe there is an easier way, I'd love to know if that is the case.
If anyone is interested this was my experience in updating the Secure Zone Expiry dates for customers.
Export a report of all members (Select Users and Secure Zones) and filter by Secure Zone.
Export a report of all customers and make sure to select the field 'Username' (This is not available in the Users and Secure Zone report, how crazy is that!).
In Excel, merge the 2 reports to get usernnames for the members. Here is a good tutorial on how to do this Vlookup Excel Best - YouTube or Merge two excel files using a common column - Super User
After merging and cleaning up the data, copy to an import template and save as csv file.
Make sure that the date format in your Expiry dates are in the correct format ie 20-Feb-2020 (check in a text editor as excel can be tricky).
Import via advanced contact import and make sure to select the secure zone in checklist below or the date will not change.
Easy isn't it, ha.
If Adobe are listening, please add the 'Username' field to the Users and Secure Zone reports, this would save a lot of work.

Please add a date/time stamp to each entry in the list of sites with accepted/blocked cookies.

It would make it easier to find which site it is that I just blocked, that now prevents me from loading the page. (ConOps: Go to list. Sort by date/time. Delete all entries from the past few minutes.)

You can see all permissions including for cookies for the current tab on the "Tools > Page Info > Permissions" window.

DTP to load master data, gives the message 'No more data available'.

hi,
when i execute the DTP to load master data from DSO, it executes and gives the message 'No more data available'. The request is green but no data is transferred from the DSO to master data.
I want the DSO data to get into master data how do i do it?

Hi Hardik,
Since the request is green, there is no error in extraction. But, as they've rightly pointed out, the Update mode of the DTP must be Delta and there must not be any new Master data that you are looking for.
Compare the data and check if the Delta DTP should bring anything at all i.e. new records. If there are no new records, then the Delta DTP will not bring any more data. Else, change mode to Full and check again.
Reg,
Dhaval

Message if Expiry date of Master Test Equipment is in the Past

Similar Messages

Maybe you are looking for