Message in a Message
Any ideas on how to send a message inside another message?
This is a common OO concept but JMS doesn't seem to be able to handle it. You can send objects in the messages as long as they are derivative of primitives (Integer, Short, etc.). But you can't send a message or even any other object type.
There aren't even methods for making the message into a byte array so the writeBytes methods could be used.
In order to display a message box you can simply write following statement in code behind.
Response.Write("<script>alert('Hello');</script>");
Ovais Mehboob Ahmed Khan http://ovaismehboob.wordpress.com
Similar Messages
-
Error message into warning message KO450
Hi,
There are unsettle RA value in project PAD-9114. Because of this unsettle RA value in the project we are not able to close the project and receiving error message like below:
1.There is still WIP for wbs
2.Balance of wbs is not zero.
There is still WIP for WBS PAD-9114
Message no. KO450
Diagnosis
The WIP for WBS PAD-9114 has not been cleared.
System Response
WBS PAD-9114 cannot be deleted.
Procedure
Calculate the WIP for WBS PAD-9114 so that it can be cleared. Then settle WBS PAD-9114, including the cleared WIP in the settlement.
How to change above error message into warning message so that it will allow us to close the project.
With regards,
V.krishnamoorthyHi,
Thanks for your answer. But still i am receiving the same error
There is still WIP for WBS PAD-9114
Message no. KO450
Diagnosis
The WIP for WBS PAD-9114 has not been cleared.
System Response
WBS PAD-9114 cannot be deleted.
Procedure
Calculate the WIP for WBS PAD-9114 so that it can be cleared. Then settle WBS PAD-9114, including the cleared WIP in the settlement.
With regards,
V.krishnamoorthy -
My iphone5 stopped receiving calls and text messages then a message said my sim is locked what can I do?
You can call you're carrier and have them unlock it.
-
When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?
I'm not sure I understand the question, is the message tone going more then once?
Turn off repeat message alert here:
settings > notifications > messages > repeat alert > never
Some people have found this does not stop the repeat miessage tone,
if you are one of those then I suggest you contact Apple:
http://www.apple.com/feedback/iphone.html
They may not respond, but hopefully will fix in uodate if enough people complain. -
Write message to Job log with message class and message number
hi folk,
When running a background job I'm able to write a message to the job log using the statement - Message "some text..." type 'I'.
In the Job log I can see the message "some text.." with a "default" message class and message number (but in my report i don't specify any message ID) so I have no idea it comes from.
Then I try to send a message where I specify the message class/number etc...using message id 'Z1' number 000 with "some text..." In the job log I now can see the "right" message class "Z1" and the number 000, but the message is empty?
Please advice how to write a message with the message class and message number.
Best regards
LinhNgHi Linh,
How did you provide the text "Some message"? Did you hard code it or used a text element?
Regards,
Immanuel. -
Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks
search google for "iphone remove picture from contact"
-
How can I add a new message(custom text message) to the holiday approval em
How can I add a new message(custom text message) to the holiday approval email-notification sent to the manager?
TIAThe answer is 'not very easily', unless the information you want to display is the employee's leave balances. In 12.1.3 Oracle have delivered functionality that allows you to include the leave balances in the approval notifications out-the-box, ie, without customization.
For any other information you're probably going to have to customize the standard delivered HRSSA workflow. Within this workflow, the Leave of Absence functionality uses the Notify Approver (Embedded) (HR_APPROVER_NTF) notification. The body of this notification is set to the Notify Approver (Embedded) (HR_NTF_EMBEDDED_REGION) attribute. This in turn defaults to:
JSP:/OA_HTML/OA.jsp?OAFunc=-&HR_EMBEDDED_REGION-&NtfId=-&#NID-
So essentially you can change the HR_APPROVER_NTF notification. The problem with changing this notification is that it's generic - it's used for all SSHR functions and not just Leave of Absence. That means you have to make other, more substantial, customizations to the workflow to ensure the changes you make only applies to LOA.
The other option is to personalize the review page (ie, the region referenced in &HR_EMBEDDED_REGION) to include whatever messages you want. But that means they'll appear on the Review page and all LOA approval notifications and that might not be what you want.
It's usually better to live with what Oracle deliver and find an alternative solution! What's the content of the message you want to include? -
Since installing iOS 7 messages randomly disappear from the messages list. When I scroll through message from 'Fred' has disappeared. I go to 'Fred' in Contacts, go to send message and there are the messages. 'Fred' messages then re-appear in Message list. Why? How to stop messages disappearing from message list? Thoughts?
Since installing iOS 7 messages randomly disappear from the messages list. When I scroll through message from 'Fred' has disappeared. I go to 'Fred' in Contacts, go to send message and there are the messages. 'Fred' messages then re-appear in Message list. Why? How to stop messages disappearing from message list? Thoughts?
-
How to change Error Message into warning message
Dear Friends,
I am getting an error
The qty stored that was entered is adjusted
Message no. XU 040
at the time of GRN. I am maintaining batch specific Unit of Measure.
Please tell me how to change this error message in to a warning message.
Thanks
Prashant AtriHello Prashant,
This is satndard SAP messagge which is maintained in customizing;
SPRO>>Logistics - General>>Batch Management>>Define Attributes of System Messages
Here you can convert this messages to warning message. I urge you to please check with abaper as this may be hardcoded message and it may have implications on valuation and posting.
In the above IMG path you can do the changes
Br,
Tushar
Edited by: Tushar Patankar on Jan 1, 2011 5:36 PM -
CONVERTING ERROR MESSAGE TO WARNING MESSAGE
HI GURUS,
CAN ANY ONE GIVE ME IDEA HOW TO CONVERT ERROR MESSAGE TO WARNING MESSAGE IN QM MODULE.WHEN I AM POSTING STOCK FROM QUALITY TO UNRESTRICTED. BECAUSE IAM GETTING ERROR WHEN IAM POSTING STOCK GIVING ERROR TRANSFER POSTING THROUGH QUALITY ONLY. MY ERROR MESSAGE NO IS QA495. I TRIED ALL POSIBILITES. BECAUSE I AM NOT GETTING INSPECTION LOT BUT STOCK IN QUALITY. GIVE ME IDEA.
BHAKTADear BHAKTA,
it's not possible to customize every message in SAP System to warning or error.
It depends on the coding. I have found message QA495 twice in coding, both times it's hard coded in Inlcude MM07MQSS. So it's not possible in standard to change this.
How to find this information:
SE91
-> enter the message
-> button 'display'
-> select the line
-> button 'where-used list' (CRTLSHIFTF3)
-> now you get a list of all programms where the message is used
Now you can check if message type is hard coded or read in customizing.
If you really want this you have to modifiy the coding. But I would not recommed this, as hard coded errors are necessary to make sure that the standard scenarios work correctly.
Regards,
Sabine -
Change error message to warning message
Hi Experts,
How can we change error message to warning message.
Eg: T-code : SE91 shows the message. If i want to change message class PG, message no 26 error to warning what will be the process.
Regards
RatanHi Ratan,
Message class PG is used in the below mentioned Standard SAP Methods and Includes, So it is not suggested to change the SAP standard code.
Regards,
Raja Sekhar -
Change Error Message to Warning Message in GL account
Hi Experts,
I want to Change Error Message to Warning Message In the GL Account - FH142.
What is the Transcation Code for this.Hi,
Go to transaction code OBMSG and give application area as FH and create new condition for the message 142.
SAP will support such kind of changes.
Regards,
Sankar -
Error message to Warning message in MIGO?
Hi,
When we are executing MIGO 411 K transaction we are getting error message 'Enter Vendor Number'. I want to supress change error message to warning message.
Because my requirement is populate vendor dynamically based on combination of Material, Plant, Storage location and Batch. I got user exit for this User-exit (EXIT_SAPMM07M_001) when click on check button.
We found a User-exit (EXIT_SAPMM07M_001) triggered when User clicks on 'CHECK' button. But since the vendor field (LIFNR) is a mandatory field in MIGO 411 K transaction, its throwing an error message 'Enter Vendor Number'. So unable to proceed further.
so i want to change error message into warning message and then i will proceed.
error message i m getting is " Enter vendor number for special stock k".
Or is there any other to populate the vendor dynamically based on Material, Plant, Storage location and Batch. please help..
thanksThis error is dynamic call so you can't make this one as warning message but why don't you try to add the search criteria based on your requirement to the field of vendor in migo.
e.g. when you do F4 or drop down you will see the list of vendor you can get from diff way.......so add one more earch criteria for your reqs here. -
Change of error message into warning message
While doing FBZP i have found the following error.
Clearing acct only allowed for an outgoing bill of exch.pmnt
Message no. F3029
I am not able to go further, the above message is coming.
I want to make the error message into warning message.
Please suggest, how to overcomeHello BSR,
The Error message F3029 is raised when the clearing account (T042I-VKONT) is filled but the payment method in question is not defined as "Bill/exchange".
I assume that the field is not changable at the moment. You may make necessary changes (delete the entry or delete the specified account) with the instructions below.
1. Go to Tcd: FBZP -> Click [Pmt methods in country]
2. Select the entry for the erroneous country(?)/payment method
3. Change Payment method classification to 'Bill/ex' and save
Now you should be able to change "Set Up Bank Determination for Payment
Transactions" table.
If you still want to use this payment method, please change back to the original classification after making necessary changes in T042I.
I believe this information would help you in resolving the reported issue.
Best Regards,
Vanessa Barth. -
Convert Error Message into Warning Message
I wanted to change alternate account into existing GL account. But it is not permitting to post because it is having balance. So i wanted to change error message into warning message. i tried with the following process but still it is not showing warning message showing as error message only. please suggest us.
a) OBMSG
Application area Msg Allowed Standard Switch Off
FH 007 W E tick mark
b) OBA5
Msg Online BatchI Standard
007 w w w
Please suggest me i need it urgently.
Regards
D.J. LaxmiHi,
Certain Error messages are not passed to be changed to warning message eventhough you maintained proper customization for the same. I can only recommend you that neutralize the balance of Gl account and change if reporting is accepted.
Regards,
Chintan Joshi -
Change of Message status from Error message to Warning message
Hello,
I would like to know the configuration details of changing the status of a message class from Error message to warning message.
Thanks
ManishHi,
You can do it via OBA5 transaction; enter the application code, and put an entry for the message setting the flag to warning. Keep in mind, that not for every message it could be done.
Regards,
Eli
Maybe you are looking for
-
Link between Ivnoice A/R (OINV) and Ivnoice A/P (OPCH)
Hi! Is it possible to find some link between Ivnoice A/R (OINV) and Ivnoice A/P (OPCH) without using batches, serial numbers and UDFs? Any ideas? Thanx! Regards, David
-
Inspection type 01 and physical samples
Dears I have scenario like this My raw material is avtivated inspection type 01 and 15 (For physical sample) as GR done inspection lost was created of 01 type and it was workin fine now when ever vendor delivery a new item with a slight changes fo
-
I have a problem in using the function 'WS_DELIVERY_UPDATE'
I want to update the delivery document at the batch field (CHARG = '0000000605') by using the function 'WS_DELIVERY_UPDATE'. Before update, this batch field is initial. After having completely updated this delivery, I try to update this batch field a
-
5 Things MSPs Need to Know about the Windows 10 Upgrade Launch This Wednesday
This Wednesday, July 29th, Microsoft will officially launch their new Windows 10 operating system for both business and home users.If your non-enterprise end users have either Windows 7 or Windows 8.1 installed on their devices, they are eligible for
-
LabVIEW 7.1 LabVIEW DSC 7.1 Citadel 5 Hi, I've developed an application with Labview 7.1... I'm using a customer/server structure. I'm using a fieldPoint to acquire analog values trough labview DSC. When only the server runs, i've no problem. I can r