Message in Real Time???

how do i see the messages going out in real time?

SSH or Telnet to the box and login. At the prompt, enter "grep", hit enter.
Answer as below (assuming mail _logs is number 14 on your box like they are on mine...)
Enter the number of the log you wish to grep.
[]> 14
Enter the regular expression to grep.
[]>
Do you want this search to be case insensitive? [Y]> y
Do you want to tail the logs? [N]> y
Do you want to paginate the output? [N]> n

Similar Messages

Is there a way to create dependency on the real-time jobs

Hi,
We have around 80 real-time services running and loading the changed data into the target.
The process being used is
IBM Informix > IBM CDC > JMS (xml messages) > DS real-time services > Oracle EDW.
While using the above process, when ever there is change in the fact table and the dimension table, both the real-time services are loading the data at the same time into the target. This is causing issues in looking up data with the timing issue.
Is there a way where we can create a dependency and resolve the timing issue and make sure the lookup table is loaded and then the master table is loaded?
Please let me know.
Thanks,
C

Hello
With the design you curently have, you will have potential sequencing issues. There is no magic in Data Services to solve this.
You might want to consider building more complex real-time jobs that accept more complex data structures and have logic to process the data in dependency order.
Michael

Receiving the error message while executing the Real Time DTP

Hi,
I am receiving the error message while executing the Real time DTP for Billing data.
Error Message - Record filtered in advance as error records with the same key exist RSM2 722
When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
Diagnosis
The existing DTP requires a serialized update because fields are updated
non-commutatively during the processing run (for example, MOVE).
Therefore all new data records that have the same semantic key as
incorrect records that have not yet been corrected in earlier requests
or earlier data packages of the same request, are filtered out after the
extraction in a special step. In this way the system ensures that
incorrect data records are not repeated for your changes, which may not
contain errors themselves.
System Response
The data record is not updated but is written to an error stack.
Procedure
Procedure
Correct all incorrect data records and update them using an error DTP.
Procedure for System Administration
I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
Regards,
Ram

Hi Arvindh,
Its write optimized DSO.. there is no option to generate SIDs.
Hi Kiran,
I checked the link u sent me. Here the main issue is..The function module is standard and its not allowing me to do enhancement point..
Any idea in using Badi's??
Thanks all...

When I send messages off-line, they enter in the addressed mailbox with the date and hour which I've clicked "Send later". How could I set up to the real time?

When I send messages off-line, they enter in the addressed mailbox with the date and hour which I've clicked “Send later”. How could I set up to the real time?

What you say about Send Later timestamp is correct.
When you click Send or Send Later a time is set regardless of when you actually sent the Send Later email.
Please voice your vote at this link:
https://bugzilla.mozilla.org/show_bug.cgi?id=560901
You will need to logon/register.

Build a message driven (HL7) real time data warehousing

How far is practical to build a message driven (HL7) real time datawarehouse on a EAI,which can be used for BI , considering the issues of data cleansing, integrity that are relevent in Healthcare instead of a traditional datawarehouse ?

Hi A.Lal,
Since you have mentioned ECC5.0,Assuming that the client is generating the following reports in ECC,already:
The Production report (ZPRD)
Wastage Report (YWR)
A Charge Register Report
then brainstorm the PP functional consultant and try to pick the R3 Fields from the reports.Then its all about mapping them to the BW Info objects.
If these reports are not maintained at ECC ,then you need to have sessions with the users/PP Consultant to decide whether u can go ahead with BC or get some customizing done..
Goodluck

How to display string message real time in a string area?

I want to display string message on String indicator in screen real time, message is updating realtime when test application runing, i want to see the newest message display on screen real time instead of by drag down the vertical scroll bar manually.
please give me an idea how to set the attribute of string indicator?thanks

You can use Text.ScrollPosition property node for autoscrolling.
Andrey.

Real Time Job with no Message Target?

Hi All. I'm curious to know if anyone has built a real time job without an xml message target. I thought that any message source 'getting' from a Topic does not require a response. Well data services is not letting me get away with not having the message target.
The message I'm receiving is one that I want to insert into a table, it is not being used in a lookup to then send out a new record out to a message target.
Real Time jobs are still a new concept to me. Thanks in advance for your help.

Hi,
Try using a row generation transform, generate one row and pass a hard coded value as output message. You cannot do away with an output message in the case of real time.
Regards,
Suneer

Can anyone send about ALE-MESSAGE CONTROL with real time scenario?

hi friends,
i have doubt on ALE-MESSAGE CONTROL METHOD.
SO, anyone can explain with a real time example.
If have a chance please send with screenshots or with navigations

Check out this blog:
Message Control (Output Control) for ALE
Raja

Real-Time Outbound Message Time-Out

Hello,
Could anyone give advice on how to properly handle Time-out errors when sending Real-time Outbound Messages?
On the XAI Sender, I have set the HTTP Timeout context value to 30 (I'm assuming this is 30 seconds), but the server just keeps on retrying to send the message and eventually takes about 1-1.5 minutes before it eventually stops trying.
Also, does anybody have any ideas on how to indicate the page is currently busy while trying to send the outbound message?

hi andries
can i know what type of invocation type you are using in external system
If you use RTHTTPSNDR on xai sender then you must use invocation type as realtime on externalsystem( you can define xsl for both request and response)
If you use HTTPSNDR then you must use invocation type as XAI (for which you can define a request xsl but not response xsl)
so my advice is to go with RTHTTPSNDR and define both request and response xsl files
MOST Important your xai sender never gets refreshed unless you restart your ccb server this is because invocation is REALTIME
if you use HTTPSNDR then just by going to xai command you can refresh mpl refresh sender command
I think its a bug in ccb 2.3.1 sender doesnt gets refreshed with new values
Now for the purpose if you can post your request schema and then the request xsl and the response xsl ,ill clear your doubt happily.

Real-Time Collaboration Instant Messaging & .wmv video ?

Hi, is posible using the last version Netweaver 2004s and Netweaver 2004s BI for some <b>Real-Time Collaboration Instant Messaging</b> for speak to users depending the costcenter and territory area ?
So idea is show too video .wmv for Principal Directors speaking to cost center depending the territory area and departaments. ?
Some idea ?
Thank you ...

We try test Collaboration and Content the Collaboration.

CC&B not populating response to real-time Outbound Message

I have a real-time Outbound Message which is sent to webMethods via SOAP with the HTTP Sender (not RTHTTPSNDR). In my BO Schema, I have the response element defined as:
<responseMessage type="raw" mapField="XML_RESPONSE"/>
The Outbound Message is successfully sent and the webMethods response updates the message to 'Complete' but there is no data in the response tab on the Outbound Message in CC&B. For my testing, I simply want a single element of <status> populated in the response.
This is the response message that is sent by webMehods:
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope
xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SOAP-ENV:Header
xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
</SOAP-ENV:Header>
<SOAP-ENV:Body>
<responseMessage>
<Status>Success</Status>
</responseMessage>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Any help would be appreciated.
Thanks.

hi andries
can i know what type of invocation type you are using in external system
If you use RTHTTPSNDR on xai sender then you must use invocation type as realtime on externalsystem( you can define xsl for both request and response)
If you use HTTPSNDR then you must use invocation type as XAI (for which you can define a request xsl but not response xsl)
so my advice is to go with RTHTTPSNDR and define both request and response xsl files
MOST Important your xai sender never gets refreshed unless you restart your ccb server this is because invocation is REALTIME
if you use HTTPSNDR then just by going to xai command you can refresh mpl refresh sender command
I think its a bug in ccb 2.3.1 sender doesnt gets refreshed with new values
Now for the purpose if you can post your request schema and then the request xsl and the response xsl ,ill clear your doubt happily.

How do I monitor in real time my teen's text messages?

How do I monitor in real time my teen's text messages?

I have just started using TeenSafe.com. I like that it monitors even deleted messages but it only updates while phone is being recharged. And I haven't figured out yet if it picks up iMessages. I can get location in real time which is helpful.

OSB can support Real Time Messaging Protocol?

Hi everyone:
I have a question, OSB can support Real Time Messaging Protocol (RMTP) to transmit streaming of Audio and Video?
Thanks in advance

Knorrar,
You can pass audio/video streams as binary data to OSB.
Audio File / Binary / OSB
Regards,
Abhinav

Real time Broadcast messaging

Hi,
we have configured broadcast messaging. But its not happening real time. we have to logoff ICWC and then relogin.
have i missed any setting. Please let me know.
Thanks
Adi

Hello Aditya, Pedro,
I had the same problem as you.
The issue was resolved by clearing the Java Cache.
I have proceed as follow :
Start à Control Panel à Java
On the 'General' tab, select the 'Settings' button under the 'Temporary Internet Files'
Then click 'Delete Files...' on the Temporary Files Dialog
Agree to delete all Applications, Applets and log/trace files
Disable the option “Keep temporary files on my computer”
Go to C:\Users\<your user>\AppData\LocalLow\Sun\Java\Deployment\cache and delete all the files.
As the result the BroadcastBar.htm is refreching real time in ICWC.
Hope it was helpful.
Kindest regards,
Elena

InDesign auto-size frame feature not working in real time in InCopy why?

We have just recently migrated from InCopy CS4 to CS6 to take advantage of the new features like the auto resize frame option, however it now seems that this feature is not working in real-time.
Basically the steps are needed to be complete before it auto-resizes the frame in InCopy, we use both layout and assignment based workflows:
1. From an ID document ('doc1'), exported a 'layer' to IC, certain frames are set to auto-size in height using the text frame options. So that editorial can review and make changes to text and the frame should resize according to the specifications set. IC stories are saved to a folder located in a content folder inside the top issue working folder.
2. Editorial opens the IC software, then opens the ID 'doc1'. Check’s out correct .icml file and makes edits to frame with auto resize.
3. Frame does not resize according to text frame set options and InCopy file does not respond in same fashion as InDesign.
4. Change only occurs when InCopy file is closed and updated in InDesign, which is frustrating as this feature would save huge amounts of time serving editorial requests.
Has anybody experienced this type of workflow problem? If anyone can provide mw with some pointers as to what can I do to get this to update in real time perhaps run a script? Update file in InCopy and refresh I will very much appreciate their assistance. I have run out of ideas.
Thanks!

We've had all sorts of problems with this feature as it should've worked straight out of the box but after some testing we have found that its something to do with the way you open the actual file in InCopy. Which is far from ideal and should have been UAT by Adobe before release.
This will not work consistently work if you open the designed .indd or .icma file in InCopy using the file open command within the application.
If you need this to work, the InCopy user has to open the .indd or .icma file by dragging and droping from OS windows explorer into InCopy, we use Windows 7 acrros all the teams. Check out .icml files add text changes to the set auto resized frames, this process will expand/collapse the frames to fit the content but as you have to use the drag and drop method to open the .indd and .icma file, 2 users cannot access the same time doc at the same time (a serious flaw in the programming architecture!) which stops people working in parallel. Save changes, check in .icml content and close .indd or .icma.
However the flaw comes in if you then open the .indd and .icma file in InCopy using the file open command within the application, before an InDesign user opens and saves the file (updates the design). The corrections added in the previous stage above, will not show the frames expanded/collapsed to take in the added text and instead show over matter???? The only way around this is to ask an InDesign user to open, update and save the design that way the InCopy user will see the same result no matter what file open method they use.
Another suggestion is to design the page to have some of the auto resize frames anchored within main body of text and that way the frames will expland/collapse when checking out and editing the content. However, this does cause issues with InDesign crashing etc. so we have tried to stop this method within the working group.
Have you experienced other more serious issues with InDesign crashing consistently when re-importing .icml files? See other forums here:
http://forums.adobe.com/thread/671820?start=80&tstart=0
http://forums.adobe.com/message/5045608#5045608
As far as we can see this is a major flaw in how the application(s) work, we have an enterprise agreement with Adobe and purchase a large volume of Adobe products globally but so far the technical support team are unable to find a solution to this and I'm not hopeful of any resolution soon even with the new release of Adobe CC.

Message in Real Time???

Similar Messages

Maybe you are looking for