Message in standby alert file
I am recieving this error messgae in standby alert file. Any one have idea about this message
ksvcreate: Process(m000) creation failed
ksvcreate: Process(m000) creation failed
ksvcreate: Process(m000) creation failed
Thanks
According to metalink Note:352388.1:
>>
Cause:
Additional M000 slave processes cannot start
Solution:
Increase value of the repository database 'processes' parameter. Ensure
it is set to at least 150.
>>
Similar Messages
-
How rman backup messages printed in alert file?
surprised how the messages of rman getting printed in alert file?
i am using 10.2.0.4 on AIX and using veritas net backups.....from rman.....
ORA-19624: operation failed, retry possible
ORA-19506: failed to create sequential file, name="c-1650503797-20091118-0c", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:Raman wrote:
Well. i agree. we have logs to capture media backups....so wanted to cut only these media backups failure out of alert file...else what is happening here is our monitoring reports these as alerts as already we know from media backup logs...So why not modify your monitoring of the alert log to exclude that particular error?
Personally, I'd allow both systems to continue to report the error from their perspective.
>
in nutshell...just exploring any options to turn off the media backup failures like any rman parameters or can anything to do with veritas parameters?
Anyway thanks to all for your valuable opinions.
Thanks,
Raman. -
ORA- Error messages in Oracle Alert File
Hello Gurus,
In a SAP - BW system installed on Oracle 8.1.7.4, there were some oracle errors entries as follows;
Fri Nov 3 02:13:32 2006
Errors in file /oracle/<SID>/saptrace/background/p001_14866_<sid>.trc:
ORA-00603: ORACLE server session terminated by fatal error
ORA-00052: maximum number of enqueue resources (8000) exceeded
ORA-00052: maximum number of enqueue resources (8000) exceeded
How fatal is this error? how to make sure this doesnt happen again and anyone can share the SQL command to see how many ENQUEUE_RESOURCES are being used?
If i have to increase the enqueue, where and how to do it?
Thanks in advance for your help.Hi "Basis Learner",
1. Oracle 8.1.7 is out of date! It's not maintained anymore.
2. You don't need SQL to tell how many enqueue resources have been used here. The message is clear: 8000. The current maximum. Not a single one more and no less.
3. Well how many more you'll need is hard to tell. But oviously more. Try with plus 50% -> 12000.
Since the process that died here had been a paralle query server process, it may also be the case, that you've configured too many parallel servers. As they run at the same time (parallel) they'll make use of enqueues at the very same time...
4. Of course there are notes:
398927 - ORA error as the dimensions of the parameters are too small
745639 - FAQ: Oracle enqueues
632427 - Oracle 8.1.7* database parameterization for BW
Hope that helps.
KR Lars -
Weird : Database Hangs without any message in Alert File
Hi
We have production database 10.2.0 , in the last 3 days database database has to be restarted as it hangs without any information in the Alert File.
No trace file is genrated at that time.
Only SYS user Can LOGIN to the database.
I had no other option but to restart
Database is in NO ARCHIVE MODE
There is Enough Space in Temporary Tablespace and all other tablespace.
NO patches were applied to the database
NO parameters has been modified
When i check the CPU usage its normal.
There is Enough Disk Space.
This is procution and i apreciate Help.
Thank Youuser6421665 wrote:
Only SYS user Can LOGIN to the database.
What is the OS ? Windows --> Did you check virus scan or some other process running during that time ?
Unix / Linux --> Is sysadmin running a defrag on the disks or some other OS Utility ?
Do you login as SYS from the server ? Can you login as any other user from the server ?
Hang == Slow ?
>
This is procution and i apreciate Help.
Production database in NOARCHIVE log mode... is interesting by itself, but that is not a question here. -
Can I reduce the message in the alert log ?
Hi All,
I receive lot of message in my alert log. Can I reduce the message in the alert log ? please help me
Tue Sep 12 13:53:45 2006
ARC0: received prod
Tue Sep 12 13:56:13 2006
LGWR: prodding the archiver
Thread 1 advanced to log sequence 2105494
Tue Sep 12 13:56:13 2006
Current log# 4 seq# 2105494 mem# 0: E:\ORACLE\MMP\LOG\REDO04.LOG
Current log# 4 seq# 2105494 mem# 1: C:\ORACLE\MMP\LOG\REDO04.LOG
Tue Sep 12 13:56:14 2006
ARC1: received prod
Tue Sep 12 13:56:14 2006
ARC1: Beginning to archive log# 3 seq# 2105493
ARC1: Completed archiving log# 3 seq# 2105493
ARC1: re-scanning for new log files
ARC1: prodding the archiver
Tue Sep 12 13:56:18 2006
ARC0: received prod
Tue Sep 12 13:58:26 2006
LGWR: prodding the archiver
Thread 1 advanced to log sequence 2105495
Tue Sep 12 13:58:26 2006
Current log# 1 seq# 2105495 mem# 0: C:\ORACLE\MMP\LOG\REDO01.LOG
Current log# 1 seq# 2105495 mem# 1: E:\ORACLE\MMP\LOG\REDO01.LOG
Tue Sep 12 13:58:27 2006
ARC1: received prod
Tue Sep 12 13:58:27 2006
ARC1: Beginning to archive log# 4 seq# 2105494
ARC1: Completed archiving log# 4 seq# 2105494
ARC1: re-scanning for new log files
ARC1: prodding the archiver
Tue Sep 12 13:58:31 2006
ARC0: received prodHi,
The Oracle database writes an audit trail of the archived redo log files received from the primary database into a trace file. This parameter specifies the level of trace that should be generated when redo logs are archived. The value of the parameter indicates the level of trace to be generated.
Level Description
0 Disabled (default)
1 Track archival of redo log file
2 Track status of each archivelog destination
4 Track archival operational phase
8 Track archivelog destination activity
16 Track detailed archivelog destination activity
32 Track archivelog destination parameter changes
64 Track ARCn process state activity
128 Track FAL server related activities
It can be used in a Primary Database or Standby Database
for more details see:
http://docs.nojabrsk.ru/sol10/B12037_01/server.101/b10823/trace.htm
Cheers -
Can't open ALERT file error in 10G
We just converted to 10G 2 weeks ago. The alter file was where it was suppposed to be until a couple of days ago. Now I am getting this message and have no alert file. I have tried shutting down the db and restarting, to no avail. Archiving is working normally as is everything else that I can see. The bdump location in the pfile shows correct, bit doesn't match what the error message is saying. This error message comes from the lgwtr trace log.
Cannot open alert file "/u01/app/oracle/admin/PROD/bdump//home/oracle/alert_PROD.log"; errno = 2
I am also getting these dbverify logs in 10G, during startup. Any insight would be helpful. Thanks.
root@hccaix3: /u01/app/oracle/admin/PROD/bdump #cat dbv_file25_062600.log
DBVERIFY: Release 10.2.0.4.0 - Production on Fri Sep 19 00:50:02 2008
Copyright (c) 1982, 2007, Oracle. All rights reserved.
DBVERIFY - Verification starting : FILE = /u02/oradata/PROD/indx_PROD_09.dbf
DBVERIFY - Verification complete
Total Pages Examined : 128000
Total Pages Processed (Data) : 0
Total Pages Failing (Data) : 0
Total Pages Processed (Index): 61172
Total Pages Failing (Index): 0
Total Pages Processed (Other): 2601
Total Pages Processed (Seg) : 0
Total Pages Failing (Seg) : 0
Total Pages Empty : 64227
Total Pages Marked Corrupt : 0
Total Pages Influx : 0
Highest block SCN : 1048904582 (0.1048904582)user10278327 wrote:
Cannot open alert file "/u01/app/oracle/admin/PROD/bdump//home/oracle/alert_PROD.log"; errno = 2As you can see the bdump location is different in these two messages. above and below
root@hccaix3: /u01/app/oracle/admin/PROD/bdump #cat dbv_file25_062600.log
Which one is correct?
Since you are on 10g you are most likely using spfile instead of pfile, so login to database
sqlplus / as sysdba
do
show parameter spfile
show parameter background_dump_dest -
Please tell me I am recieving this message in alert file Oracle DataGuard is not available in this edition of oracle
ThanksHi
Data Guard Is Available with ORACLE 9i onwards. Socheck with the version of ur Database with the help of following command.....
SQL> SELECT * FROM V&VERSION
Thnx & Regards
Sunil -
Error in Standby alert log continuously
After I setup the Physical Standby and Logical Standby database, I found lots of errors showing in alert log of Standby database.
LOGMINER: Error 308 encountered, failed to read missing logfile /u01/oradata/arch2/primary/1_1_111111111.dbf
According to the doc, I set the values LOG_ARCHIVE_DEST_3 in case of role transition:
(for primary)
LOCATION=/u01/oradata/arch2/primary/ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=primary(for standby)
LOCATION=/u01/oradata/arch2/standby/ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=standbyWhen I run this command, the error keeps showing in the alert log continuously! Why does it look for the path "primary", but not "standby" ?
ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE;
Help! Does anyone know the problem? All new data can't be found in the logical standby now.
Thank you!When I enable the LOG_ARCHIVE_DEST_STATE_3, the errors show in alert log again!
LOGMINER: Error 308 encountered, failed to read missing logfile /u01/oradata/arch2/primary/1_1_111111111.dbf
SELECT TYPE,STATUS FROM V$LOGSTDBY;
COORDINATOR
ORA-01291: missing logfile
here are my parameters:
Primary:
LOG_ARCHIVE_DEST_1='LOCATION=/u01/oradata/arch/ MANDATORY VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=primary'
LOG_ARCHIVE_DEST_2='SERVICE=ORCL_SB LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=standby'
LOG_ARCHIVE_DEST_3='LOCATION=/u01/oradata/arch2/primary/ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=primary'
Standby:
LOG_ARCHIVE_DEST_1='LOCATION=/u01/oradata/arch/ MANDATORY VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=standby'
LOG_ARCHIVE_DEST_2='SERVICE=ORCL_PRI LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=primary'
LOG_ARCHIVE_DEST_3='LOCATION=/u01/oradata/arch2/standby/ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=standby'
Why does the path in primary parameter file show in standby alert log?? -
InfoSpoke fails with message "Could not open file on application server"
BW Experts,
I created an InfoSpoke that is configured to extract to a flat file. The name of the file is specified using a logical filename. During extraction, the infospoke reports the error message "Could not open file on application server" adnd marks the extraction process as red(failed). I have tried to run the InfoSpoke in background mode and in dialog mode and the same error appears. After i run in dialog mode, i checked SU53 for authorization errors and did not find any. I also tried changing the Logical filename setup in transaction FILE to a more "friendly" directory in which i'm sure i have authorizations (e.g. my UNIX home directory) and im still getting errors.
Can you please share your thoughts on this? Any help will greatly appreciated. I also promise to award points.Hi Nagesh,
Thanks for helping out.
If i configure the InfoSpoke to download to a file using "File Name" option and also check the "Application server" checkbox, the extract works correctly (extraction to the defualt SAP path and filename=infospoke name). If i configure the InfoSpoke to download to the local workstation, the InfoSpoke also works correctly. It's only when i configure it to download to the application server and use the "Logical filename" option, that i encounter a failed extract.
Here are the messages is the Open Hub Monitor:
(red icon) Request No.147515
0 Data Records
Runtime 1 sec.
(red icon)Run No. 1
0 Data Records
Runtime 1 sec.
Messages for Run
Extraction is running RSBO 305
Could not open file on application server RSBO 214
Request 147515 was terminated before extraction RSBO 326
Request 1475151: Error occured RSBO 322
If i clink on the error message, no messages nor clues are displayed. Note, this is a new InfoSpoke that is currently in the dev system.
Please help. -
Error message: Missing PDF maker files in Word 2007
OK, I am beyond frustrated. I have had nothing but trouble with Windows Vista and Adobe Acrobat. Please help!!!
What happens: first, the pdf addin for Word 2007 suddenly becomes disabled, for no apparent reason. Forget about trying to re-enable it through the Add-Ins menu, because Word tells me that the "connected state of Office Add-Ins registered in the HKEY_LOCAL_MACHINE cannot be changed". This is a problem for me, because I use a special font (Vietnamese) that sometimes gets corrupted when running pdf maker. The only consistent way I have found to avoid this problem is to run the pdf maker as "Quick PDF" and as far as I can see that option is only available through the pdf addin in Word, I have never been able to find it when I open the Acrobat program and create a pdf from there.
Second problem: shortly after the pdf addin becomes disabled, my Acrobat program loses the ability to create pdfs altogether. I get the error message "Missing PDF maker files". Yes, I have tried repairing the installation and re-starting my computer per the instructions given. It doesn't fix the problem. I also tried looking in the Knowledge Database on this website, but it appears that the instructions they have to fix the problem there are for earlier versions of Word, not 2007, because my version of word does not look like the version of Word in their little videos.
This is the second time this has happened. The first time I resolved the problem by a) re-installing Acrobat, which is a pain because it involves calling Adobe and wading through their customer service to get a new installation number, and b) paying a computer repair service to dig deep into the guts of my computer and convince it to change the Office Add-ins to allow the pdf addin again. It worked for about 6 months, and now I have the same problem again. For some reason Vista is spontaneously disabling Acrobat.
I simply cannot deal with this every few months. We all know that Vista is a crappy program, but I run a business and I need a program that works with whatever crappy program Microsoft puts out. Please, can anyone give me suggestions about how to re-enable these functions when Vista disables them?
Thanks in advance!
Alyciafor Office 2007, see if this Microsoft product will work for you
http://www.microsoft.com/downloads/details.aspx?FamilyId=4D951911-3E7E-4AE6-B059-A2E79ED87 041&displaylang=en -
I am trying to get media from my computer, and I only receive this error message :
This type of file is not supported, or the required codec is not installed?
What should I do? I have a window 8 laptop. My video files are from my itouch/ipod. I am using Premiere Elements 7.
I have used this software with success before. HELP would greatly be appreciated!darlingdarleen
Did both laptop 1 and 2 have QuickTime (latest version or any version) installed on the computers with Premiere Elements 7 when you got this "this type of file......" message?
If you go to the opened Premiere Elements 7 projects involved and look at Share/Personal Computer/QuickTime, do you find that QuickTime Presets are shown and that you find export settings choices under the Advanced Button/Video Tab and Audio Tab?
Look at the file name of the video. Do you see any irregularies in the name of the file, dots and such?
If you record new iPod footage, open a new Premiere Elements project, and import that iPod footage, do you still get the error message? Putting aside, iTouch, what model iPod are these videos coming from?
Thanks.
ATR -
Text Message: Unable to execute file for security ...
Whenever I'm viewing a text message, when I try to open up the "Options" menu, I see the above message, "Text Message: Unable to execute file for security reasons". This doesn't seem to impact the functionality of the menu at all, everything seems to work.
Anyone ever come across this before?
I've updated the phone (Nokia E66) to the latest software, and I've only got one application installed other than the default base install (Google calendar sync utility), removing that doesn't change the problem.
Thanks in advance!I get the same error after SW update to latest version when I try to run some apps
-
I am trying to delete an XLS file from a network drive and am getting a message that says the file cannot be deleted because it is in use. I can't see where it is in use and have tried to reboot the computer to no avail. I can delete other files but several XLS files are giving me this message.
You said it was a network drive. So is someone else on the network using that same file or may have have left with excel still accessing it on their system?
-
I have just installed ilife on my new computer from my disk. I have several backups of my webpage from my old computer. Everything would be great if I could just run the program. When I click the icon for iWeb I get the following message: Can’t open file “~/Library/Application Support/iWeb/Domain.sites2.”
Somebody please help! I desperately need to update my website.In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
You can download an already compiled version with this link: iWeb Switch Domain.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT -
Error message: "Can't open file"
Using Keynote 3.0.x I try to open a keynote file created a year ago and when I try to open the "Opening" dialog comes up, you see the progress bar, and then, I get the error message, "Can’t open file" followed by the file name. Any recourse?
PowerMac G5 Mac OS X (10.4.7) FInal Cut Pro 5.1I later discovered the file was damaged. Went back to a backup copy and things were fine. Good think we have backups.
Maybe you are looking for
-
How can I add 'AlternateSpace' and 'AlternateColorValue' to my IDML in InDesign?
how can I add 'AlternateSpace' and 'AlternateColorValue' to my IDML in InDesign? I have a document and colors (CMYK) but need also RGB values to display on the web. In IDML in Resources/Graphic.xml in each Color are attributes 'AlternateSpace' and 'A
-
Is there a way to use or restore an earlier version of firefox so I can complete the FAFSA form that is mandatory for me to complete?
-
Does a table/view still return records if the underlying VPD policy fails ?
Hi All, I have one following question - Does a table or view still return records if the underlying VPD policy fails? I am adding one more thing here. Let us say security is being implemented using the application context and VPD. What would happen w
-
Hi All, I have a date char in my cube named activity date (ZACTDT). i need to pick up all items with activity date equal to the report run date. how to achieve this in bex. any suggestions would be great.
-
Why can't I play midi files in firefox
When I try to play midi files in firefox, instead of playing the audio I get a pop up box asking me if I want to open the file in quicktime. My quicktime plugin is activated.