Message Indicator but no message

My new Tour 9630 indicates unopened messages that cannot be found.  I have tried "show all", viewed saved messages in all email sub-folders and gone into each and hit the "u" key but nothing.  any suggestions??

I've had this same problem and have just figured out what has caused it. If you have the Facebook Chat app that is the cause of this glitch. Everytime someone signs in it indicates it as a new message. To fix this open the Facebook chat app , hit the menu ( blackberry logo ) button and select options , on the first tab "Sounds and alerts" select this and scroll down to the "friend presence notification:" (it should take three strokes) then uncheck everything under the friend presence notification tab. Then your problem should go away. If you dont have this app then of course it couldnt be the cause so i don't know. But if you have the Facebook Chat app more than likely that was the cause of this glitch.
- Hope This Helped, Fresh

Similar Messages

  • Message indicator but no messages listed

    My Torch 9800 will show messages or emails in the top center display.
    However, there are no emails or messages in the folders.
    This number will increase over time & the only way to clear it is to remove the battery.
    Bell can't solve this & I'm not about to pay for customer service.
    I'll switch to an iPhone first.

    Hello,
    Please try a message search:
    KB21879How to search for unread messages on the BlackBerry smartphone
    and see if it reveals anything causal. Messages come in many flavors, with emails being only one of those. The message search should reveal unreads of any flavor.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • After I update my Iphone to ios5 I have a contact that was messaging me but his messages are not grouped

    After I update my Iphone to ios5 I have a contact that was messaging me but his messages are not grouped
    on my Messages it looks like this
    222
    Update
    Person1
    Message me often
    Person1
    Hey!
    Person1 has totally same number but after I restore from backup they are not group together

    You need to get the owner's manual for your Ford's bluetooth system to see how to put your system into discovery mode for the iPhone as well as the appropriate steps to take. 
    In addition, you should see if the iPhone is supported.

  • Email Message Indicator.. no message!

    I am new to this 8900 Curve.. I have spent ages trying to sort out my first problem, so any help would be appreciated.
    I have an email message icon (not sms as it isn't slanted), but I have no unread messages anywhere.
    I have managed to find the various email folders, I can see 3 inboxes, I added my work one and then removed it, also tried to add another work one that I aborted.
    Any idea how I get rid of the unread message indicator on my screen?
    Thanks in advance.

    Thank you so much for that. It worked.. relief!

  • 1 new message showing but no message in app?

    I have 1 message showing but when I open the app I have no new messages. I have deleted all of my messages but it still shows a new message is waiting.  Does anybody else have this and how can I delete it?
    Thanks

    Try quitting the Messages app (Double tap the Home button and swipe the app preview page up)
    then
    Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)

  • Anyone Else Not Get New Message Indicator in the Messages Section of the Menu Screen?

    I have been on the phone with Technical Support numerous times and they don't seem to have an answer to this question, so I thought I would see if anyone else has experienced this.  And before anyone suggests this, technical support's answer has been to pull the plug on the box to reset it and this has not worked.
    The issue is with the "Messages" portion of the "Menu" screen.  I know Verizon does not offer a light on your STB to let you know you have a message.  Instead, you are supposed to be able to go into the Menu screen and see the word "NEW" next to "Messages" along with the picture of an envelope to let you know you have a new message. 
    For whatever reason, I don't get either of these indicators.  I never thought I had a message until I was at a friend's house and they went into their Menu and they had "NEW" next to their Messages along with the envelope indicator.  I went home and saw that I had about five messages in my Messages box, some of which were very old.
    While this is not a huge deal, it still bugs me that Verizon has no answer.  I thought my STB may have an issue, but other than this, they work fine.  (By the way, neither of my STB give me either indicator). 
    So I was just wondering if anyone else had this issue, and if so, how did you get it fixed?  Did Verizon have to come out and do something, did Technical Support need to do something on their end, or did you need to get new STB?  One time Technical Support tried to tell me that it may be an issue with Fios in my area, but that theory was shot down when I went to my friend's house.  I have never gotten either indicator, and I have had Fios for almost one year.
    I would appreciate any information you have.  Thanks.
    Solved!
    Go to Solution.

    VZ_Kim wrote:
    Hi MiMeQu,
    The indicator in the menu and the visual  indicator on the front of the stb should both alert you of messages. 
    emphasis added in quote
    It would be nice if the Verizon employees had the correct information when posting here.  The indicator light hsa never been operational since I got TV service 3 1/2 years ago (as Matcarl said).  The reason given by Verizon was "It confused too many users when the light came on and created excess calls to the FSC".
    As for the envelope in the menu, mine used to work but also stopped working on my DVR (7216) about a month ago.  To confuse matters my 2500s (2 of them) still show the envelope when there is a message.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Switched from Entourage to Mail- # of messages shows but no messages!

    I thought I successfully imported all the mail from Entourage into Mail but next to the folder is the number of messages but nothing shows up. For instance it says there are 622 Deleted messages but none show up. What did I do wrong? What do I need to do to fix this? Thanks for any help!!! Judy

    Fixed it! Duh! Just needed to restart and they were all there. Answered my own topic. Judy

  • IPhone 3GS making random text message alerts but no message received

    Since yesterday morning my iPhone 3GS (running iOS 4.2) has started randomly making the text message alert noise but no new message has been received. I've also go no other new push notifications which could have been using the same sound either. At the moment it's about 2-3 of these bizare alerts a day with no set pattern of when and where.
    Any ideas what could be the problem and how to fix it?
    Thanks

    This sounds very much like a physical fault inside the phone - short or loose component. You really have no option but to get it looked at under warranty

  • Running mac OS 10.5.8, Using Mail 3.5, Text encoding set to Automatic. messages arrive, but the message is 200  lines of alphanumerics. Top says Content-Type: text/plain;      charset=utf-8 Content-Transfer-Encoding: base64.

    I use Mail 3.6 and some incoming email messages start with
    Content-Type: text/plain;
        charset=utf-8
    Content-Transfer-Encoding: base64
    then go on to 200+ lines of alphanumerics (mostly upper and lower case letters). 
    What causes this problem, how can I fix it?
    Text encoding is set to Automatic, and  I'm not using any fancy fonts.  Senders are usually
    sending from PCS that may well use Outlook.
    Rosemary C.  Chicago

    Does it look something like this...
    JVBERi0xLjYNJeLjz9MNCjMyNCAwIG9iag08PC9GaWx0ZXIvRmxhdGVEZWNvZGUvRmlyc3QgNi9M
    ZW5ndGggMTU4L04gMS9UeXBlL09ialN0bT4+c3RyZWFtDQohx6hAp7lMT4WVkGpP6z3UpIQfO4eN
    QRbgjhTqX5mfaabWcvQk/hLnUX6MpKiXwist+RiaiGrzj8XGSNFXuvETWsnoPoV687Exvzo1KYV4
    jIuPmKXlRJvESTE/K2htJihPMS/o6fo3i+nHbTBRWpyrXSfmCPVEgsAzcyECvSU0Rz4MJsEXpdu6
    6u/hg1hlPkb2gpkUQJv50YtWhkD/Jg0KZW5kc3RyZWFtDWVuZG9iag0zMjUgMCBvYmoNPDwvRmls
    Check Mail>View>Message, does it say View Raw Source, Long Headers, or Default Headers?
    See if view Plaintext version helps.

  • IPhone displays Arabic in message preview but not message body

    Hi,
    I have an iPhone 3GS and it used to support Arabic just fine, however lately when I get e-mails with Arabic in the message body I can see some of the Arabic in the message preview until I open the message where everything is then displayed in gibberish. Typing in Arabic is still OK, and Arabic is displayed fine in Safari; the problem is just in Mail. Any help on this matter would be much appreciated.
    Thanks

    Ok try this kennylebouef,
    Open multitasking by double tapping the home button (at the bottom), a row of apps you've recently used should appear, tap and hold the photos app until it wiggles and displays an x, tap the x to close and then reopen the camera roll app. Let me know if it works. It's odd and frustrating, I know.

  • RAINBOW Message indicator ICON....

    Does anyone know what the MESSAGE indicator ICON that is in 4 colors (red, blue, green, yellow or orange) on the TOUR 9630 stand for?  I cannot figure out what APP it applies to. It is located on my home screen next to the usual message indicator ICON for messages and emails?  I apparently have 2 messages for some APP. It also has the little red and white star in the upper right hand corner of the little envelope ICON.

    Hi,
    It sounds like the eBay notification icon. Did you recently install the eBay application for the BlackBerry smartphone, if so check the eBay application for new notifications.
    Thank you
    -DrP
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Since moving to iCloud, my mobileme email works ONLY on my iPhone, but not on my PC with Outlook.  I get an error message indicating the authentication is not accepted.  any suggestions?

    since moving to iCloud, my mobileme email works ONLY on my iPhone, but not on my PC with Outlook.  I get an error message indicating the authentication is not accepted.

    To anyone who has viewed this post and is having similar difficulties, the answer came on a different forum: I dragged & dropped the files from Mail to iCloud Drive. Opened them on my MB Air, they were saved in Templates and are now accessible across all my devices.
    Answer came from SGIll: Numbers templateshttps://discussions.apple.com/message/27505880#27505880Numbers templates

  • LG Lucid 3: How can I get rid of the text message indicator? It says I have a text message, but I do not.

    I have a new LG Lucid 3 and the text message indicator says I have a new message, but I do not. Messaging is empty when I click on it. How can I get rid of the "1" indicator? I tried turning the phone on and off and that did not work.

    Thanks for trying, Anzivina! You've done some strong troubleshooting. Although I do wish it had resolved this matter, I believe we still have options. You've indicated that  you've done a factory reset. Can you walk me through the steps you took to get there? Also, after the factory reset, how long before this message indicator appeared again? Was it before or after you restored all your personal data?
    DionM_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • I am trying to upload a pdf i created to an online system but am getting an error message indicating that my document is not formatted to 8.5x11. How can i get my document to 8.5x11

    I am trying to upload a pdf i created to an online system but am getting an error message indicating that my document is not formatted to 8.5x11. How can i get my document to 8.5x11

    You'll want to fix this via the online system you used to create the PDF.
    If all content mastering and page configuration is done online then that is where you must make a correction to what you did before.
    If a file is uploaded to the online system for processing then you must revisit that file.
    Open the file with its native application and correct page size there.
    If you upload a scanned image to the online system you must configure the scanner software to output the needed page size.
    Be well...

  • I,m start to instal my adobe master collection cs5 in a new PC and during the installation ask me a aditional serial number to a previus version (CS4). I put the serial number of my cs4 and recived a message indicating that this number is not correct, but

    I,m start to install my adobe master collection cs5 in a new PC and during the installation ask me a aditional serial number to a previus version (CS4). I put the serial number of my cs4 and recived a message indicating that this number is not correct, but I check in my acount and is correct

    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Maybe you are looking for

  • Table view in se11

    Hi all, how to create table view in se11 (example please), and is it necessary to create Ztable for view or I can create view for 2 tables eg.  VBAK and VBRK. points....

  • Problem N5800 XM I need help

    I have problem with my navigation, I have fw. 30.0.011 and update OVI maps 3 . Navigation need many time to locate my position via GPS . I test It with E66 and the are more quickly about 20 seconds but on 5800 are more than 5 minutes , but when I run

  • Payment Medium Workbench(PMW) for check printing

    Dear experts, We have recently implemented PMW to speed up our telegrahic transfer (TT) payments to the banks. All is well so far. Now we want to include the check printouts as well. Previously when we were using the  classic payment medium program,

  • Java Code  that can find all the specified functions in a sql statement

    If i pass a string like SELECT CONCAT(region_name,store_name) , length( region_name) , region_name || store_name, region_name, store_name FROM Geography WHERE store_name = 'Boston'; Then my code should return CONCAT(region_name,store_name) length( re

  • Modification in F110

    Hi, I need to update the BKPF-XBLNR field when the Payment proposal is run, in the transaction F110. Please help me with this, I have no idea about modifications of the standard transactions.