Message Interface in Integration Directory

Hi,
In Integration Repository, I have one send step in BPM.
I am sending one Abstract Interface from BPM. While creating Receiver Determination in Integration Directory,
I am unable to find the message interface which is created in Integration Repository.
Please let me know, if you have any thoughts on this.
Thanks & Regards
Katta Mohan Reddy

Hi,
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1822. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
I think this is a good weblog to clear doubts with BPM. Hope it helps,
Cheers,
Divya

Similar Messages

Can u breif me the meaining of interface in Integration Directory of XI

interface of Integration Directory and Java are same as i am new to XI and familiar with java, it would be helopful if i found the difference between interface between java interface and XI interface
Thanks & Regards,
Pushparaju.B.

Hi Pushpa raj,
It is very nice to see you here, Let me share my kowledge and it might help you to understand better.
1)wthat is meant by XI?
A) XI is nothing but Exchange Infrastructure.
2)What does it do?
A)It is middle ware tool like webmethods and tibco,XI is a middle tool ware tool provided by SAP.
   XI will gives an advantage to exchange the data between two systems.The System might be A2A or B2B.A2A is nothing but Application to Application and B2B is nothing but Business to Business.
EX:System A--XI--
>System B.
                        data                  data
See the abvoe example I have two system both these system might be sap to sap or sap to non sap applications.
I have a situation where want to send data from System A to System B..I need one middle ware tool such way that it will accept the system A data and undestand the data and it could get transfer to System B.
    Sucha situation we need middle ware tool like xi and for sending the system A data to System B though XI we need one interface where it can have both sender data and receiver data.
How a Interface looks,
System A contines two fileds and I want to send these data to System B
System A                                                       System B
First Name-Rama Rao                               FullName:--Rama RaoTatineni.
LastName----Tatineni
So the above information can be hold one interface and it will transfered to System B.
Hope you understand better...still if you have any question please feel free to ask so that I can help you out by clarifiying your doubts.
Note:Interface whichin java and interface which in XI is both are different.
Thanks in Advance.
Chandu.

Not able to see the Adapters@Integration Directory!!

Hi,
I have created Data types,Messages Types, Message Interface in Integration Repository.
I have created a scenario in Directory and assigned Business systems too(I'm doing file to file scenario) and while trying to create Communication channels i'm unable to see the adapters under Parameters Tab.
 Its not showing any Adapters in ADAPTER TYPE option and also
Transport Protocol and
Message Protocol are blank.
What could be the reason??
Please guide me in order to complete my scenario.
Thanks in Advance.
LNM

hi madduri,
check these links....
Not able to see the adapter types in ID
Adapter Engine not found in ID
check the last post here.... u will get ur answer !!!
Adapter Type not found
Do these steps
1) Download XI7_0_SAP_BASIS_7.00_10_00.tpz which is available in a zipped format from the SAP Service Market Place.
2) Unzip the contents and copy the file XI7_0_SAP_BASIS_7.00_10_00.tpz (if you are using PI 7.0 or else download the file for your XI version) to
/usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
3) Goto Repository (Design)
4) Choose -> Tools -> Import Design Objects
regards
BILL
**mark the thread answered when u got ur answer

What is an Abstract in message interface ?

hai pals,
 can anybody clarify ,what is an Abtract in message interface of integration builder of xi.
 Is this,neccessary to specify and create the interface with type abstract.
 if yes , can u pls tell me why?
right answers will be appricited
have a nice day.
raj

you can also take a look at this definition:
"Interface for which no direction is defined initially.
An abstract message interface has no implementation in an
application system. You cannot generate a proxy for this
interface type. You use abstract interfaces in business
processes, for example, to receive or send messages from
application systems. You can use the same abstract
interface to receive or to send."
from:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/3355d5617d0a4cb0fe8e042c752caa/content.htm
Regards,
michal

Message interface not listed in integration directory

hi,
i have created 2 interfaces inside my message interface........
both are outbound.....!!
i am actually doing 2 scenario's inside the same name space......
when i go to integration directory i am no able to get one of the message interface's while creating the receiver determination and all those things.........?

if ur using business service then just
add outbound interface in receiver side and
inbound interface in sender side.
or if u r using business system then the problem is in ur SLD.
just check ur business system over their.
thanks
reward point if helpful .

Interface Mapping Not Found in Integration Directory

Hey guys!
I'am getting this error in the test configuration part of the integration directory:
"Interface Mapping: <Not Found> com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping"
I don't see why I should be getting this error since I have properly defined a message and interface mapping for the receiving interface.
BTW, I get this error when I use XSLT mapping. If I point my interface mapping to a normal message mapping, I get no error. Is there anything I am missing?
Regards,
Glenn

The weird thing is that when I test the the configuration in the Integration Directory, it is still looking for my old message mapping (the one i created using xi editor) even though I already replaced the referenced message mapping in the interface mapping to the XSL one.
Yes, I tested the interface mapping with the same data using the XSL mapping and there's no problem.
When I send the message though, I get an error saying "NO_RECEIVER_CASE_ASYNC" I really don't see why it should not recognize the receiver. I tried refreshing the cache but it still looks for my old mapping program...
:P

NO Interface Mapping found in the Integration Directory (Configuration)

Hi,
I've got following problem with PI 7.0::
I have a Mapping Scenario designed in the IR. It works - using test function - there. If I go to the COnfiguration Tool during creating of the Interface Determination it doesn't find the Interface Mapping. The Sender resp. Receiver Interfaces are correct assigned to the Business Systems.
- Sender Business System is a FTP Server, which contains the needed Sender Interface.
- Receiver Business System is a SAP R3 System containing the RFC Receiver Interface.
I had to change the Related Integration Server of the SAP Business System in the SLD. How can I be shure, that my PI System is syncronous with the SLD? How can i get the newest changes - BS, TS or SC - from the SLD updated to my PI?
Thx in advance
Michael

Hi,
You must make sure that you have correctly identified the interfaces in your interface mapping.
1. Message Interfaces are correctly configured
2. Outbound/Inbound Interfaces are correctly declared in Interface Mapping
Otherwise, your interface mapping would not be found in the interface determination in Integration Directory.

How to transfer Message Interface from Repository to Directory

Hello,
I have created a Message Interface (with related Message Type, Data Type) and Interface Mapping from this interface to another in Integration Repository. Then I go to Integration Directory and trying to create Interface Determination. I can select proper Interface Mapping, but it doesn't show my Inbound Interface that I created for this Mapping (means in the popup hat I trigger in the Inbound Interface it shows no entries).
It seems like some data has not been transferred from Repository to Directory. What should I do to synchronize them?
Thanks,
Maxim.

Hi Maxim,
If you dont activate the inteface you will not see. Even if you activated if you dont see in ID then you need a cache refresh. You dont need to do cache refresh everytime, because it will be automatically do. Just in case if you dont see then you can refresh manually. Also only for business service you need to add manually. For business system you will pick it up from the list.
Regards,
---Satish

Integration directory + message level access control

Hello,
are there any how-to guides or blogs explaining how to restrict user access to certain objects of the integration directory?
How can access be restricted to messages having certain interfaces in runtime workbench and sxmb_moni.
Kind regards,
Heiko

Hi Heiko,
If the system is SAP PI 7.1, this document is useful : C[ Click me|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a3efb4-57a1-2d10-a6b9-fed6d21799f8?QuickLink=index&overridelayout=true]
For other basic authorization you can make use of this link
http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
Also check out this e-learning article by Prasad Illapani
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40457bb0-c663-2910-85ad-f5f42edb715a
regards
Ramesh
Edited by: Ramesh P on Dec 5, 2011 6:59 PM

Integration Process Referencing Message Interfaces In A Different SWCV

Hello Experts!
I am creating an Integration Process IP within SWCV A, using an Interface Mapping Object within SWCV A, Abstract Message Interface MI_A1 from SWCV B and Abstract Message Interface MI_A2 from SWCV B.
Because we have the dependencies set up in the SLD wherein SWCV A is a dependent SWCV of SWCV B, these basis objects can be referenced by the IP during the create process.
However, when I try to execute a "check" or activate the IP, I get the following error:
Expression must return the interface type MI_A1
Expression must return the interface type MI_A2
If I copy the MI objects into SWCV A, the IP is activated successfully.
The question is:
Why is it that while I'm creating the IP I am able to reference these basis objects, but the "check" or "activate" does not allow it? What is this error telling me?
Want more points? Appreciate any insight.

Thanks for pointing me to the right direction, Aamir.
It turned out that the problem was caused by one of the Message Interfaces used by the Interface Mapping. It had errors to where it was pointing to an inactive IDoc object. The bad MI caused the IM to be bad, that eventually caused the problem while creating the Integration Process.
Thanks again!
H.

To create interface using Integration Repostiory and Integration Directory

How To create interface using Integration Repostiory and Integration Directory for Java appln???

Hi,
Are u talking about Java based applications. If so, one of the way is to go with Java Proxies.
Go thru these for more:https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d06315a6-e66e-2910-039c-ba8bbbd23702
Rgds,Moorthy

Value Mapping - Mass replication and Integration Directory interface

Hello all,
The following question is often approched in this forum but answer is never cleary provided. Thus I'm sorry to ask it again.
We are using Value Mapping mass data replication using special interface provided by XI. We can easily see results in cache using Cache Monitoring tool in RWB.
My question is :
Is it possible to see and then to maintain such data (mass replicated) using Integration directory (Tools > Value Mapping menu)
In this menu, we don't see our loaded data.
How to do this ?
Thanks a lot.

Hi Jean-Charles !
We also use VMR, and we find no way to access the cache data from Integration Directory. I think that by design this is not possible.
Value Mapping Replication for Mass Data
http://help.sap.com/saphelp_nw04s/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/frameset.htm
You cannot display the replicated value mapping data in the Integration Directory user interface (see Displaying/Editing the Value Mapping Table) since the original runtime data is stored in the application from which the data is copied. The value mappings created in this way using the user interface of the Integration Directory are just one of many possible sources of data.
Regards,
Matias.
ps: please award points if helpful

Integration directory : select IDOC interface for WAS business system

Hi,
While adding a receiver determination for an WAS business system, I do not get any IDOC based message interface from the design repository proposed for my business system in the popup dialog.
The only interfaces that appear are for the non SAP standard SWCV that we added to the business system. But no interface for the APPL 5.0 SWCV ( or BASIS 7.0 ) appears.
In the SLD this component is correctly listed for that WAS .
If I remove all the default search criteria , eventually, the in terface appears but after selecting it I get a message saying :
"Message Interface does not exist in any software components installed on this business system "
Since everything looks ok in the SLD I'm puzzled. How does this look on other systems ?
Any ideas
( The business system was updated from APPL 4.70 / BASIS 6.40 to APPL 5.0 / BASIS 7.00 some time ago but I don't know how it look before the upgrade of the business system )
rgds
Dirk

Hi Bavesh,
Yes, It's correctly listed. I did not manually link these components to the technical/business system. This happened automatically by the SLD data collector service. I also cleared the SLD cache several times,
rgds
Dirk

Message interface active in repository not selectable in directory

Forgive me as aI know I have seen this answered somewhere I just can't find it again!
I have a message interface in the repository that I cannot choose when creating a sender agrement. I know these have to be added to a list somewhere whn they come from external definitions. Where is that done!
Ross

If you are using Business System, you have to Assign Business System in IntegrationDirectory (ID).
In communication component without party --> Business System --> Right click & Assing Business System, Import Business System, which you have created in SLD.
Now double click on it (Imported Business System) & Add Sender & Receiver Interfaces here.
If using Business Service, create that in Communication Component without Party --> Business Component. Now double click on that Business Component (Service) & add sender & Receiver interfaces here.

Message Interface no longer exist in Integartion Repository

Hi,
I am working on a IDOC to file case, in which I want to determine the receiver at runtime using a value in IDOC, with the help of Context objects/ XPATH. In Receiver determination of ID, after selecting Sender and Sender Interface, when I try to select Receiver, it's giving message "Message Interface no longer exist in Integration Repository" and I am not able to see the Sender IDOC in the conditions field before the Receiver selection. Anybody having any idea why I am getting that error message.

hi,
check if the system that you're using has this message interfaces in sender/receiver tab (double click on the
system in directory)
if not maybe the you need to add dependencies
to the software object (product/software component) which has this message interface - this idoc
(if you do remember to refresh sld cache)
/people/michal.krawczyk2/blog/2005/08/26/xi-are-you-independentfrom-your-dependencies
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Message Interface in Integration Directory

Similar Messages

Maybe you are looking for