Message Interface Not found??

Hi friends,
In IDoc to file.
i am using Business Service as receiver.In Business service Reciever side Interface ..i am not finding inbound interface..
interface is in active state in repository..
i did cache refresh also..
please sugget me
regards
ram

Hi Ram,
There can be two possibilities....
1. Either you might not have added your Message Interface to the Business service . If added..
2. you need to check whether the Interface direction is set to inbound in the IR.
Regards
Gopi

Similar Messages

  • Message Interface not found during Receiver determination

    Hi Folks,
    While doing Receiver determination i found this error
    “Problem Loading Schema Description: Message interface does not exist in any software components installed on this business system”
    i checked it in SLD also for Product assigned to Particular Business System. Even i tried with creating a new one and assigning the product and software component to it.
    When i imported the Business system from SLD, i m not able to see any inbound and outbound interface for particular business system.
    But it is working for another scenario where inbound interfaces are used.
    plz help me out
    Sachin

    Sachin,
    ><i>DEV and QA is having diff. SLD so i created the SWC and products in SLD again.</i>
    You should export the SWCV from your Old SLD and import in into your new SLD.
    and then import the same in Integration Respository.
    When you try to export SWCV from SLD, you will get a .CIM file which you need to save in your local desktop and then import this in the new environment.
    More in this article,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
    Regards
    Bhavesh

  • Mac RDP Client (v8.0.10 on 10.10.1): HTTPEndPointException: 4, The non-proxy http connection failed to connect with the message: 404 Not Found

    My office is setting up a new gateway server.  I can connect to the old one just fine, but the new one is not allowing me to connect.  I can connect from my Windows VM, but not my Mac Client.  
    This is the log:
    2014-Nov-26 16:09:10] RDP (0): Final rdp configuration used: gatewayhostname:s:gat1.gibbscam.com
    screen mode id:i:0
    use multimon:i:0
    session bpp:i:24
    full address:s:dev-JeremyS2.gibbs.local
    audiomode:i:2
    username:s:Gibbs\JeremyS
    disable wallpaper:i:0
    disable full window drag:i:0
    disable menu anims:i:0
    disable themes:i:0
    alternate shell:s:
    shell working directory:s:
    authentication level:i:2
    connect to console:i:0
    gatewayusagemethod:i:1
    disable cursor setting:i:0
    allow font smoothing:i:1
    allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
    bookmarktype:i:3
    use redirection server name:i:0
    [2014-Nov-26 16:09:10] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 16:09:10] RDP (0): correlation id: d8afdeb7-ce3a-ceff-a6e8-51a5d5b40000
    [2014-Nov-26 16:09:10] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
        User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
    PC, and then try again.
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 16:09:15] RDP (0): ------ END ACTIVE CONNECTION ------
    [2014-Nov-26 16:09:15] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 16:09:15] RDP (0): correlation id: 3d81bcf6-8d0e-fba8-b75e-bd2a247c0000
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
    [2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
    [2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 305
        User Message : HTTPEndpointException: 4, The non-proxy http connection failed to connect with the message: 404 Not
    Found
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 16:09:16] RDP (0): ------ END ACTIVE CONNECTION ------
    And here's a log for server that I can connect to:
    [2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used: gatewayhostname:s:gato.gibbscam.com
    screen mode id:i:0
    use multimon:i:1
    session bpp:i:24
    full address:s:dev-JeremyS2.gibbs.local
    audiomode:i:2
    username:s:Gibbs\JeremyS
    disable wallpaper:i:0
    disable full window drag:i:0
    disable menu anims:i:0
    disable themes:i:0
    alternate shell:s:
    shell working directory:s:
    authentication level:i:2
    connect to console:i:0
    gatewayusagemethod:i:1
    disable cursor setting:i:0
    allow font smoothing:i:1
    allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
    bookmarktype:i:3
    use redirection server name:i:0
    [2014-Nov-26 15:52:20] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 15:52:20] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 15:52:20] RDP (0): correlation id: 3bea4411-4b23-c197-9b52-63f948a10000
    [2014-Nov-26 15:52:20] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 15:52:25] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
        User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
    PC, and then try again.
    [2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 15:52:25] RDP (0): ------ END ACTIVE CONNECTION ------
    [2014-Nov-26 15:52:25] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 15:52:25] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 15:52:26] RDP (0): correlation id: 509122b5-d9b1-60f0-a0ac-b75a8dc20000
    [2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
    [2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
    [2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
    [2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
    [2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolInactive(4)
    [2014-Nov-26 15:52:28] RDP (0): Server supports RAIL
    [2014-Nov-26 15:52:28] RDP (0): Protocol state changed to: ProtocolActive(5)
    [2014-Nov-26 15:52:29] RDP (0): Server hides cursor
    [2014-Nov-26 15:52:31] RDP (0): Server shows cursor
    [2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 15:52:35] RDP (0): ------ END ACTIVE CONNECTION ------
    Any suggestions on what I can ask my IT department to change on the server so I can connect would be greatly appreciated. 

    Hi Jeremy,
    Thank you for posting in Windows Server Forum.
    From the error and other description it seems that there is some misconfiguration with setup. You need to provide the FQDN name of the server as might server name is not resolving its name properly and so facing issue. As seems from below details:
    [2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used:gatewayhostname:s:gato.gibbscam.com
    screen mode id:i:0
    use multimon:i:1
    session bpp:i:24
    full address:s:dev-JeremyS2.gibbs.local
    Configuration used and full address name both appears different so please verify configuration accordingly.
    Please check the DNS record, check certificate whether it match FQDN name of the server with certificate name, also try to check to connect with IP address and see what result you can find.
    You can follow below guide to configure RD Gateway and after that verify the result.
    1. Deploying Remote Desktop Gateway RDS 2012
    2. How To Work with RD Gateway in Windows Server 2012
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • Hp 5535 will not scan, error message printer not found

    I have a HP Envy 5535. I have only been able to scan one time with it. I scanned 22 documents, after running HP Scan Doc 4.4. Each time the HP Scan Doc states that everything is OK, yet as soon as I try to do even a test scan, I get the error message "Printer not found." I have also tried to run this scan with my McAfee virus firewall off, and it still doesn't work. I have also identified it on McAfee as part of my network.
    This question was solved.
    View Solution.

    Hi @prazdancr,
    Welcome to the HP Forums!
    I am sorry that you cannot scan with your HP Envy 5535, but I am happy to help!
    For further assistance I will need to know:
    If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
    If the printer is connected, Wireless, or USB.
    If the printer is able to make copies by itself.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
    In the meantime, please try going through this scanning guide. A 'The computer is not responding' Error Message Displays During Scanning.
    Hope to hear from you soon, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Getting error message file not found unable to sync to ipod

    90 percent of my music from my playlists wont load to my ipod. It has loaded in the past nut now i get message file not found unable to sync. Meanwhile I can play all of this music out of itunes I just cant seem to load it to my ipod. why? all of the songs in the playlists seem to have an "!" next to them in the track list. That is until i play them then it goes away im not sure if these things are related but i think they may be. plaese help

    +all of the songs in the playlists seem to have an "!" next to them in the track list. That is until i play them then it goes away im not sure if these things are related but i think they may be.+
    Yes, I'm sure they are related. I have no idea how your PC/itunes got into that state. What's happening now, is itunes thinks it doesn't know where the file is on your PC's hard drive, but when you double-click it, it mysteriously finds it.
    I suspect after itunes finds it again, it will load to your ipod.
    Is this music on an external HD?

  • Itunes install error message - program not found ...x64/difxinst64.exe

    itunes install error message - program not found ...x64/difxinst64.exe
    no problems with ITunes on Dell Inspiron Windows 7 until yesterday.  ITunes version 11.0.2.  iphone won't connect stating required software is not installed.  uninstall and install 64 bit version of iTunes.  I have 64 bit version already.  I have uninstalled and reinstalled 5 times already.  When re-installing ITunes get error message c:\programdata\34be82c4-e596-4e99-a191-52c6199ebf6\x64\difxinst64.exe.  file does not have a program associated with it for performing this action. please install or create an association in the Default Programs control panel.   iTunes install continues after the difxinst64.exe error message but then get the iphone cannot be used error message again.  therefore, I can't sync my iphone with iTunes until I figure this out.
    can't win for losing.  had iTunes on my windows 7 laptop for 4 years.  first time I've ever encountered this.

    I am a PC Tech and had a customer with this issue. Ran across this post in my search and ended up finding the solution on my own. The problem isn't with the iTunes software but the installer for the GEARAspi drivers. Really the issues is with the file type asssociations in the windows registry. On the system I was working on the HKCR key for .exe should point to the exefile key but pointed to nothing. To fix it create a new txt document and paste the following in (only paste what is in between the [code][/code] tags):
    [code]
    Windows Registry Editor Version 5.00
    [HKEY_CLASSES_ROOT\.exe]
    @="exefile"
    "Content Type"="application/x-msdownload"
    [HKEY_CLASSES_ROOT\.exe\PersistentHandler]
    @="{098f2470-bae0-11cd-b579-08002b30bfeb}"
    [/code]
    Now change the extension from .txt to .reg. Then right click and select merge. iTunes should now install properly.

  • Sqlldr:  Message 2100 not found - No msg files in my RDBMS\Mesg dir

    Hi All,
    I am trying to use sqlldr on an WIN2003R3 server. This is not working and I get an error message:
    MESSAGE 2100 NOT FOUND: WHEN ATTEMPTING TO START SQLLDR.
    I searched the internet and there it states that this should have to do with my ORACLE_HOME or ORACLE_BASE environment variables or path. I checked those, but they seem fine.
    On metalink it states two possiblities, for WIN NT,
    - Removing the ORACLE_HOME env. variable
    - Copy the files from another Oracle installation
    (Metalink Note:171648.1 and Note:1081848.6).
    I tried the first, but still doesnot work. Unfortunately I can't try the second, because all other Oracle installations I have access to are the same version, so they all have the same files in the RDBMS\Mesg directory.
    My questions are:
    - How many files should there be in the mentioned directory? (Now I've got 4: kgpus.msb, ocius.msb, oraus.msb, smgus.msb )
    - Where can I get the missing files, or is there any other way to get around this?
    - any ohter suggestions?
    Thanks in advance. Any help will be appreciated,
    Regards,
    Toin.
    Message was edited by:
    Toin
    Fixed a typo.
    Message was edited by:
    Toin

    The problem is that my SQL Loader is not working under WIN NT. This is a known issue, one of the suggestions I found on metalink is to manually copy the message files that should be in ORACLE_HOME\DBMS\Mseg from another Oracle installation.
    I cannot do this, because all my Oracle installations are the same. So the questions is where can I find the appropriate message files, so I can get my SQL Loader to run??
    Thanks.
    Toin.

  • Have upgraded to 6.0.2 on my MacBook and get error message "Server Not Found" everytime i use Firefox; however, if i then click on my Gmail or other sites from bookmark toolbar it connects. means an extra step and that never happened before

    when i first click on Firefox the URL: www.27yhbnhy6tfgvrbcfre3.com shows up and the error message "Server not Found". but i can connect to any website by just clicking on a bookmark from the toolbar (or typing in a url). this never happened with previous versions of Firefox

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    * https://support.mozilla.com/kb/Server+not+found
    * https://support.mozilla.com/kb/Firewalls
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • When I Update My Nano, I get error message, "file not found"

    When I Update My Nano, I get an error message, "file not found, cannot update iPod". I have looked through the manual and tried reinstalling the iTunes program but it still won't update my iPod with music or pictures. PLease help.

    Try these basic troubleshooting steps one at a time.
    The Five Rs.

  • Error message: 'Codec not found..'

    Hi all. This is a new error I've never seen before.
    It's stopping me doing anything at all really.
    As soon as I start up FCP and click on a sequence I get this message: 'Codec not found. You may be using a compression type without the corresponding hardware card.'
    Then I click on OK and it says 'Error - Out of memory.'
    I've heard rumours that it could be the fact I'm using a strange type of JPEG, but it still happens with PNGs.
    I've made sure my scratch disks are all going to the right place. I also have 100gb of free space.
    The version of FCP I'm using is 6.0.5. I'm using an iMac with OSX 10.4.11 (yes, I know it's old!) and I've downloaded the latest version of Quicktime.
    Help, anyone? I have an assignment due in tomorrow.
    Many thanks...

    What formats are your sources and sequence?  Have you tried resetting your fcp preferences?
    https://discussions.apple.com/docs/DOC-2491
    And here are some other troubleshooting steps
    https://discussions.apple.com/docs/DOC-2591
    We're here to help, but unless we approach this in a systematic manner, obvious things can slip thru the cracks. So go thru these things and just let us know if there's anything amiss.
    I'm in NYC also, so if you are up against the wall, and feel like bringing your trusty macbook pro by my cutting room, I could probably take a quick look at it and see if there's anything obvious.

  • Error message: 'Codec not found. You may be using a compression type without the corresponding hardware card' - then - 'Error. Out of memory'

    Hi all. This is a new error I've never seen before.
    It's stopping me doing anything at all really.
    As soon as I start up FCP and click on a sequence I get this message: 'Codec not found. You may be using a compression type without the corresponding hardware card.'
    Then I click on OK and it says 'Error - Out of memory.'
    I've heard rumours that it could be the fact I'm using a strange type of JPEG, but it still happens with PNGs.
    I've made sure my scratch disks are all going to the right place. I also have 100gb of free space.
    The version of FCP I'm using is 6.0.5. I'm using an iMac with OSX 10.4.11 (yes, I know it's old!) and I've downloaded the latest version of Quicktime.
    Help, anyone? I have an assignment due in tomorrow.
    Many thanks...

    p.s. having looked at other posts, perhaps I am missing some (or all) of the relevant codecs?
    In the folder Macintosh HD > Library > Quicktime
    there is basically nothing. Do you think this is the problem?
    If so, where do I download FCP codecs from?
    Many thanks..

  • URGENT: ORA-12514: Message 12514 not found;

    Hi, I have a big problem:
    I have a PC (PC1) with an Oracle 9.2.0.5 database.
    I have other PC (client=PC2) with Oracle forms and reports runtime installed.
    I try to execute my .fmx from PC2 and everything was ok.
    After that, I installed again in another server (PC3) the Oracle database, and when I tried to connect from my client (PC2) to the new database, it appears the error:
    ORA-12514: Message 12514 not found; Product=RDBMS80; Facility=ORA
    Why is giving this error? May be the PC3 needs an ORACLE_HOME environment variable or similar?
    I've seen the following in relation with oracle_home:
    In the PC server (PC3) the ora_home variable in regedit (it doesn't exists as windows environment variable) is e:\oracle\ora92
    It's different from oracle_home in PC2 (Pc client) , in which is: c:\orant
    Is it important?
    Is this error possible because of the TNSNAMES configuration?
    Please help me, is very urgent for me.
    Thanks a lot

    Hi guys,
    I've solved the problem: It was in the TNSNAMES. The service_name was incorrect. I changed it and it worked.

  • Error when sending message: 404 not found

    Hi,
    New to XI, practicing file to jdbc scenario. File is pickedup from the source folder but nothing appearing on the receiver end ms access database.
    In the Component Monitoring, tried sending message manually with all the right info in Integration engine, getting an error message saying:
    "Error when sending message : 404 not found"
    Also tried in Adapter Engine and the result same.
    Before doing this scenario, I tried file - file scenario then also the sender file pickedup from source folder but nothing happend at the receiver end.
    Any idea's?? what might be the issue????
    Thanks,
    Venu.

    Hi Venu,
    "404 is a not found error", plz make a check of  your URL you're using is correct? do you use the right port? Normally the port is 80<SystemNo>, so rather 8001 than 7001.
    Also check in transaction SICF, if the node /sap/xi/adapter_plain has been activated, if not, activate it and try again.
    If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
    http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
    For your error, refer to the following threads:
    Unable to find an associated SLD element
    Unable to refresh cache contents in XI.
    Unable to find an associated SLD element
    Also check that the Adapter Engine is successfully registered in the SLD. To do this, call the Content Maintenance function in the SLD as follows:
    http://<sld-host>:<sld-j2ee-port>/sld u2192 Administration u2192 Content Maintenance.
    Select XI Adapter Framework.
    Thirteen associations have to be registered.
    (Source: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857)
    If you can't find all the associations, then you will have to create the associations manually.
    This is a very good blog which answers ur question:
    check this weblog
    https://weblogs.sdn.sap.com/pub/wlg/4061?page=last&x-showcontent=off [original link is broken] [original link is broken] [original link is broken]
    Regards,
    Vinod.

  • ./lsnrctl start effort- Message 1070 not found;

    Message 1070 not found; No message file for product=network, facility=TNSTNS-125 error when trying to start the DB listiner?
    oracle@linuxsrv:/u01/app/oracle/OraHome/bin> ./lsnrctl start
    LSNRCTL for Linux: Version 10.1.0.4.2 - Production on 16-JUN-2009 17:16:15
    Copyright (c) 1991, 2004, Oracle. All rights reserved.
    Message 1070 not found; No message file for product=network, facility=TNSTNS-125 45: Message 12545 not found; No message file for product=network, facility=TNS
    TNS-12560: Message 12560 not found; No message file for product=network, facili ty=TNS
    TNS-00515: Message 515 not found; No message file for product=network, facilit y=TNS
    Linux Error: 2: No such file or directory
    oracle@linuxsrv:/u01/app/oracle/OraHome/bin>
    OAS environment settings
    LESS=-M -I
    MACHTYPE=i686-suse-linux
    LOGNAME=oracle
    XDG_DATA_DIRS=/usr/share:/etc/opt/kde3/share:/opt/kde3/share
    LESSOPEN=lessopen.sh %s
    INFOPATH=/usr/local/info:/usr/share/info:/usr/info
    ORA_NLS33=/u01/app/oracle/as10gHome/lib:/u01/app/oracle/bin:/u01/app/oracle:/u01/app/midtier:/u01/app/midtier/bin:/u01/app/midtier/as10gHome/opmm/lib:/OraHome/lib:/OraHome/opmn/lib/nls/admin/data
    DISPLAY=192.168.2.9:0.0
    ORACLE_HOME=/u01/app/oracle/as10gHome/lib:/u01/app/oracle/bin:/u01/app/oracle:/u01/app/midtier:/u01/app/midtier/bin:/u01/app/midtier/as10gHome/opmm/lib:/OraHome/lib:/OraHome/opmn/lib
    LESSCLOSE=lessclose.sh %s %s
    G_BROKEN_FILENAMES=1
    COLORTERM=1
    _=/usr/bin/env
    OLDPWD=/u01/app/oracle/OraHome
    oracle@linuxsrv:/u01/app/oracle/OraHome/bin> vi /home/oracle/.bash_profile
    TMP=/usr/tmp
    DISPLAY=192.168.2.9:0.0
    ORACLE_BASE=/u01/app/oracle
    ORACLE_MID=/u01/app/midtier
    #ORACLE_OCA=/u01/app/OCA
    LD_LIBRARY_PATH=$ORACLE_BASE/OraHome/opmn/lib:$ORACLE_BASE/OraHome/lib:$ORACLE_MID/as10gHome/opmn/lib:$ORACLE_MID/as10gHome/lib:$PATH
    ORACLE_HOME=$ORACLE_BASE/as10gHome/lib:$ORACLE_BASE/bin:$ORACLE_BASE:$ORACLE_MID:$ORACLE_MID/bin:$ORACLE_MID/as10gHome/opmm/lib:$ORACLE_HOME/OraHome/lib:$ORACLE_HOME/OraHome/opmn/lib
    ORACLE_SID=orcl
    LISTENER=$ORACLE_HOME/bin/lsnrctl
    TNS_ADMIN=$ORACLE_HOME/network/admin
    ORA_NLS33=$ORACLE_HOME/nls/admin/data
    PATH=/usr/local/bin:/usr/bin:/usr/local2/bin:/usr:$ORACLE_HOME/bin:$ORACLE_HOME/bin:$ORACLE_HOME/dcm/bin:$ORACLE_HOME/opmn/bin/$ORACLE_HOME/lib:$PATH
    LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib:$ORACLE_HOME/opmn/lib:$ORACLE_HOME/dcm/bin:$ORACLE_HOME/opmn/bin:$ORACLE_HOME/lib:$PATH
    export TMP ORACLE_BASE ORACLE_HOME ORACLE_SID ORACLE_MID ORACLE_OCA LD_LIBRARY_PATH LISTENER DISPLAY PATH TNS_ADMIN ORA_NLS33
    Any suggestion in resolving?

    exit and log back..
    oracle@linuxsrv:~> env
    LESSKEY=/etc/lesskey.bin
    NNTPSERVER=news
    INFODIR=/usr/local/info:/usr/share/info:/usr/info
    MANPATH=/usr/local/man:/usr/share/man:/opt/dx/man
    HOSTNAME=linuxsrv
    XKEYSYMDB=/usr/share/X11/XKeysymDB
    HOST=linuxsrv
    SHELL=/bin/bash
    TERM=xterm
    PROFILEREAD=true
    HISTSIZE=1000
    LISTENER=/u01/app/oracle/as10gHome/bin/lsnrctl
    ORACLE_MID=/u01/app/midtier
    GNOME_PATH=:/usr
    MORE=-sl
    USER=oracle
    LD_LIBRARY_PATH=/u01/app/oracle/OraHome/opmn/lib:/u01/app/oracle/OraHome/lib:/u01/app/midtier/as10gHome/opmn/lib:/u01/app/midtier/as10gHome/lib:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/opt/kde3/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin:/u01/app/oracle/as10gHome/lib:/u01/app/oracle/as10gHome/opmn/lib:/u01/app/oracle/as10gHome/dcm/bin:/u01/app/oracle/as10gHome/opmn/bin:/u01/app/oracle/as10gHome/lib:/usr/local/bin:/usr/bin:/usr/local2/bin:/usr:/u01/app/oracle/as10gHome/bin:/u01/app/oracle/as10gHome/bin:/u01/app/oracle/as10gHome/dcm/bin:/u01/app/oracle/as10gHome/opmn/bin//u01/app/oracle/as10gHome/lib:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/opt/kde3/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin
    LS_COLORS=no=00:fi=00:di=01;34:ln=00;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=41;33;01:ex=00;32:*.cmd=00;32:*.exe=01;32:*.com=01;32:*.bat=01;32:*.btm=01;32:*.dll=01;32:*.tar=00;31:*.tbz=00;31:*.tgz=00;31:*.rpm=00;31:*.deb=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.lzma=00;31:*.zip=00;31:*.zoo=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.tb2=00;31:*.tz2=00;31:*.tbz2=00;31:*.xz=00;31:*.avi=01;35:*.bmp=01;35:*.fli=01;35:*.gif=01;35:*.jpg=01;35:*.jpeg=01;35:*.mng=01;35:*.mov=01;35:*.mpg=01;35:*.pcx=01;35:*.pbm=01;35:*.pgm=01;35:*.png=01;35:*.ppm=01;35:*.tga=01;35:*.tif=01;35:*.xbm=01;35:*.xpm=01;35:*.dl=01;35:*.gl=01;35:*.wmv=01;35:*.aiff=00;32:*.au=00;32:*.mid=00;32:*.mp3=00;32:*.ogg=00;32:*.voc=00;32:*.wav=00;32:
    ORACLE_SID=orcl
    XNLSPATH=/usr/share/X11/nls
    ENV=/etc/bash.bashrc
    ORACLE_BASE=/u01/app/oracle
    HOSTTYPE=i386
    FROM_HEADER=
    PAGER=less
    CSHEDIT=emacs
    XDG_CONFIG_DIRS=/etc/xdg
    MINICOM=-c on
    TNS_ADMIN=/u01/app/oracle/as10gHome/network/admin
    GNOMEDIR=/usr
    MAIL=/var/spool/mail/oracle
    PATH=/usr/local/bin:/usr/bin:/usr/local2/bin:/usr:/u01/app/oracle/as10gHome/bin:/u01/app/oracle/as10gHome/bin:/u01/app/oracle/as10gHome/dcm/bin:/u01/app/oracle/as10gHome/opmn/bin//u01/app/oracle/as10gHome/lib:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/opt/kde3/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin
    CPU=i686
    INPUTRC=/etc/inputrc
    PWD=/home/oracle
    LANG=en_US.UTF-8
    PYTHONSTARTUP=/etc/pythonstart
    QT_SYSTEM_DIR=/usr/share/desktop-data
    SHLVL=1
    HOME=/home/oracle
    LESS_ADVANCED_PREPROCESSOR=no
    OSTYPE=linux
    LS_OPTIONS=-N --color=tty -T 0
    XCURSOR_THEME=DMZ
    WINDOWMANAGER=/usr/bin/startkde
    TMP=/usr/tmp
    G_FILENAME_ENCODING=@locale,UTF-8,ISO-8859-15,CP1252
    LESS=-M -I
    MACHTYPE=i686-suse-linux
    LOGNAME=oracle
    XDG_DATA_DIRS=/usr/share:/etc/opt/kde3/share:/opt/kde3/share
    LESSOPEN=lessopen.sh %s
    INFOPATH=/usr/local/info:/usr/share/info:/usr/info
    ORA_NLS33=/u01/app/oracle/as10gHome/nls/admin/data
    DISPLAY=192.168.2.9:0.0
    ORACLE_HOME=/u01/app/oracle/as10gHome
    LESSCLOSE=lessclose.sh %s %s
    G_BROKEN_FILENAMES=1
    COLORTERM=1
    _=/usr/bin/env
    oracle@linuxsrv:~>

  • Message 3513 not found;  product=NETWORK; facility=TNS

    I have installed 11g instant client on windows machine and when I do a tnsping from cmd I get
    Message 3513 not found; product=NETWORK; facility=TNS
    I have already copied all the files over from mesg folder. Also when I do tnsping on something which is not in tnsnames.ora file I get
    C:\Users\xxx>tnsping abc
    TNS Ping Utility for 64-bit Window
    012 10:49:12
    Copyright (c) 1997, 2010, Oracle.
    Used parameter files:
    D:\oracle\product\11.2.0\client_1\.......
    TNS-03505: Failed to resolve name
    What else can I do to resolve this?

    868806 wrote:
    I have installed 11g instant client on windows machine and when I do a tnsping from cmd I get
    Message 3513 not found; product=NETWORK; facility=TNS
    I have already copied all the files over from mesg folder. Also when I do tnsping on something which is not in tnsnames.ora file I get
    Copied from where to where, and why? there should be no reason to be copying these files at all.
    C:\Users\xxx>tnsping abc
    And to add to the confusion, as has already pointed up, instant client doesn't come with tnsping, so your use of tnsping contradicts your statement that you are working with instant client.
    TNS Ping Utility for 64-bit Window
    012 10:49:12
    Copyright (c) 1997, 2010, Oracle.
    Used parameter files:
    D:\oracle\product\11.2.0\client_1\.......
    TNS-03505: Failed to resolve name
    http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/
    What else can I do to resolve this?First, answer the questions to clarify the instant client/tnsping disconnect ...

Maybe you are looking for