Message is 'Microsoft.VC80.CRT,type="win32",version="8.0.50727.6195",publicKeyToken="1fc8b 3b9a1e18e3b",processorArchitecture="x86'". Please refer to Help and Support for more information. HRESULT: 0
Hi,
I cannot install iTunes after an update went wrong. Seen another with exact same problem but without an answer. Error message is:
'Microsoft.VC80.CRT,type="win32",version="8.0.50727.6195",publicKeyToken="",proc essorArchitecture="x86'". Please refer to Help and Support for more information. HRESULT: 0x800736FD
OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch
Similar Messages
-
I'm trying to download itunes but everytime an error comes up that says that^^^.After another error comes up that says "Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start sysrem services." Can anyone help me?
OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
Hello,
Pls help me while I am intalling itunes for win7 I getting follwoing errro:
an error occurred during the intallation of assembly Microsoft.VC80.CRT.type='win32".version="8.0.050727.6195",publicKeyToken="1fc8b .3b9a1e18e3b".processorArchitectyre="x86"/please refer to help and support for more information. HRESULT:8x800736FD.Hello there BJiphone,
Thank you for using Apple Support Communities!
It sounds like you are having issues installing the latest iTunes on your computer.
I would try the troublehsooting outlined in the article named:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Cheers,
Sterling -
while trying to install the new versoin of itunes i get this error message
An Error occurred during the instillation of assembly.VC80.CRT,type="win32",version="8.0.50727.6195",publicKeyToken="1fc8b3b 9a1e18e3b",processorArchitecture="x86"". please refer to Help and Support for more information. HRESULT: 0x800736FD
i unistalled the older version i had and that did not help
i downloaded something about a microsoft framework.4 what ever that means
im not particularly gifted when it comes to computers so your help would be very gratefully received!!!
thank you
DermotCould you solve this problem? I have similr problem. I can't upgrade Itune it generat the error below. I already unistall de all version but the error still appear. Could you help?
-
An error ocurred during the installation of assembly 'Microsoft. VC80.crt,type="win32", version="8.0.50727.4053".publickKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="amd64".Please refer to help and support for more information. HRESULT: 0x80071A30
Instale iTunes perfectamente, conecte mi iPone y me dijo que necesitaba otra version que borrase la actual y instalase la nueva, borre la que tenia, y al instalar la nueva me salia esto y no tengo forma de instalarla. Ya hice los tutoriales de la pagina, y nada.OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
I had itunes working fine on my computer until it stopped playing music files one day. I uninstalled the program and quicktime and tried reinstalling afterwards. I was able to install quicktime but itunes wouldn't istall now. My computer in Windows 7 pc and I have been using itunes for about 2 years now..
Hi tKalra - I got the same error and finally managed to install itunes successfully. Below is what happened with me.
I have Windows7 64 bit. I downloaded itunes 10.6.3 for windows64bit and started the installation wizard by opening the downloaded file. At one stage I got the same error you have mentioned above. I started googling to find a solution and thats how I found your post. Anyway I went through lot of other posts that suggested lot of different things but I just wanted to try my own thing first.
So what I did is to go through with the wizard by clicking ok on the error. I then got an error about apple mobile device service not running. I ignored and went ahead with the installation. Installation finished but the itunes wont start giving the service not running error. I tried to manually start the service but it gave a privilege error.
I then went to control panel and uninstalled itunes, apple mobile device thing and bonjour..basically what ever was from apple. Then I also went to start -> run -> regedit and checked for any registry keys for apple under local user and local computer. Deleted if found. Restarted and then just right clicked on the itunes setup file that was downloaded and ran it as administrator. That did it for me. So I am guessing it was privilege thing but not sure. Hope this helps. -
Hi!
I am trying to install iTunes on my laptop that runs Windows 8.1
I have tried several solutions discussed in similar questions but none worked
-uninstalled and reinstalled
-cleaned C drive for all Apple products
-tried to install security update’ Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update’ but the same error appeared
-Windows module installer is enabled
I always get this error
an error occured during the installation fo assembly "Microsoft.VC80.CRT.type="win32", version="8.0.50727.6195, public key token=,1fc8b3b9a1e18e3b", processor architecture="x86", please refer to help and support for more information. HRESULT: 0x80070422
If i ignore and proceed another error appears
Service 'Apple Mobile device' failed to start. Verify that you have sufficient privileges to start system services
If i ignore one more time, itunes is installed but when i try to run it
Apple application support was not found. Apple Application Support is required to run iTunes Helper- please uninstall iTunes and then install itunes again-error 2
Can someone help me please? Thank you!Hi M2i7guel,
Welcome to Apple Support Communities.
It sounds like there is an issue installing iTunes and other Windows updates on your PC. The article linked below provides troubleshooting suggestions that will resolve most issues like the one that you've described.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
I hope this helps.
-Jason -
At first i got a problem with my Apple Mobile Device Support, but then after i've done some research browsing the net on how to fix that problem, i've finally found the solution to that problem... However, after I've finish installing and trying to run ITunes, there's a pop up says Error 2 , Apple Application Support is needed to run ITunes.... So i've followed the instruction and suggestions given out which is to extract my iTunes64Setup and install Apple Application Support standalone manually, but during the installation, an error pops out that really really really could give me cancer.... the error goes like this-
""An error occured during the instilation of assembly "Microsoft.VC80.CRT,type+"win32",version="8.0.50727.6195"publicKeyToken="1fc8b3 b9a1e18e3b",processorArchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x80070BC9.""
God knows how many times i've reinstalled Itunes, and how many pages i've been thruu just to look for a solution to this problem..... PLEASE HELP ME IM BEGGING YOU TO WHOEVER HAVE ANY IDEA ON HOW TO FIX THIS T^T
Im running on Window 7 ultimate 64-bit btw...OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
I have this error pop up while almost done installing, "An error occurred during the installation of assemble 'Microsoft.VC80.CRT,type="win32",version="8.0.50727.4053",publicKeyToken="1fc8b 3b9a1e18e3b",processorArchitecture="amd64"". HRESULT: 0x80070422
OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
Cannot install itunes, I keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
Cannot install itunes Keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and sup
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
Can't download latest Itunes 10.5 - Keep receiving following error: An error occurred during the installation of assembly 'Microsoft VC80 CRT.type="win32",version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".pro cessorArchitecture="x86".
OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
I've had itunes on my computer previously, but when I tried to update it, I was forced to uninstall it, then tried to reinstall and it keeps giving me this error:
microsoft.vc80.crt.type="win32".version="8.0.50727.6195".publickeytoken="1fc8b9a 1e18e3b".processorarchitecture="amd64"
I've tried uninstalling all the programs that come with it multiple times, and I don't know what to do now, please help!!!!Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
when i install itunes64
microsoft.VC80.CRT,tupe="win32",version="8.0.50727.6195",publicKeytoken="1fc8b3b 9a1e18e3b",processorArchitecture="x86",hresult:0x80070BC9
whats wrong,my system is win7 64bithresult: 0x80070BC9
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80070BC9, or some other number? (If they're another number, what number are you getting?) -
I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR
Maybe you are looking for
-
How to Place the report in the WEB from Parameter Form
Hello folks, We are using report 9i. From the one our form we are going call the report and get the parameter from Parameter form and generate the PDF format of report and show it in the WEB browser. Tried with option DesType "Cache" and Desformat "P
-
Mail message displaying "blocked plug-in"
I used to copy youtube videso and send them to friends via mail... Never had a problem doing so with OSX 10.6.8 NOW alla of a sudden that is not possible and I get a "blocked plug-in" in the body of the message instead of the youtube video... How do
-
Hi Guys Doing some timelapse stuff at the moment and trying to use cr2 raw files with CS4 After Effects I have Camera Raw plug-in 5.7 The .CR2 open fine in Photoshop but I get the good old error 45::35 cannot parse file when I try to open in After Ef
-
HT3669 Why are Dell printers not supported?
I have three printers and a Windows laptop and a Macbook. I cannot connect the Dell printer to my Macbook due to now drivers from Dell or Apple. I realize this is more of a Dell issue, but is there another driver I can use for the Dell AIO 944 prin
-
Can I interface a Pocket PC with instruments using a GPIB-PCMCIA card?
Currently, I am trying to interface a Compaq Pocket PC, iPAQ H3870, with some scientific instruments. I would like to be able to issue commands and gather data from the Pocket PC. Right now, I can create Visual Basic programs to issue the GPIB instru