"Message is used to carry data between the BlackBerry handheld and an associated server"

Hi everyone,
I'm a first time poster!
I've been receiving about a 100 of these emails everyday for over a week now!
Bell mobility and Bell ISP both say it's not their issue or problem to fix and told me to contact the other!
The e-mails are orginating from:
[email protected]
Any suggestions?
Please help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
This message is used to carry data between the BlackBerry handheld and an
associated server. Please do not delete, move or respond to this message - it
will be processed by the server.
BEGINETP 116
AdxV+90AAAAAIBAIMzAzQUM3MUQgGWZyaXp6ZWxsQHBlaS5zeW1wYXRpY28uY2EAI/HrYFAF
Q01JTUUDQICAgIAyAAAwOENGOEQ3NkIrRysxALbQEVSv1zvyA8fJF15bAW0AGb/C87pyXKXe
k+KxQN/Inek!
ENDETP 70196029
Message Edited by Frazzledazzle on 09-17-2009 11:44 AM

HI and Welcome to the forums!
Here are several KB's that discuss the issue...hopefully one of them has what you need:
KB04254 Network@etp email messages arrive on the BlackBerry smartphone
KB10289 What is a Network@etp message
KB13551 Receiving both email messages and network@etp email messages on the BlackBerry Smartphone
KB12643 ETP messages are not deleted from the Inbox after delivery to the BlackBerry smartphone
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

This message is used to carry data between the BlackBerry handheld and an associated server.........

Hi everyone,
I am having issues with a couple of BlackBerry's, where they are receiving a message on their phone saying:
"This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server."
Email is from "[email protected]"
This has only appeared since installing the BlackBerry Desktop Software version 6.
We have used the link below which resolved the issue on one of the BlackBerry's but on the other neither of the options are there.
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB04254&sliceId=SAL_Pub...
The link I have just posted references to version 5, just wondered if anyone knows how to resolve it in version 6 or some other option. Original email is still received fine but want to stop the other email about "This message is used to carry data between.......".
Thanks in Advance.
Kevin

An alternative, if you cannot stop it via the two recommended fixes, is to send those messages to your jiunk folder at the email server level so that they never reach your BlackBerry...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server.

I have a client with a BlackBerry Pearl 8110. It was (is) configured to receive email from a Microsoft Exchange Server via his Outlook account. I have uninstalled the Desktop Manager and re-installed ensuring the computer transmits his email via the Re-Director. All settings in the Desktop Manager are correct. The phone was working fine for over 5 years. Now he is getting emails both on his phone and in Outlook saying:
This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server.
I have verified that his phone is not attempting to perform the Enterprise Activation process by checking :
Options > Advanced Options > Enterprise Activation.
He does however have a Service Book entitled "CMIME"
How can I resolve this issue?

Is the user needing the Redirector service?
Step 1: If you're not using Redirector or Enterprise, you should uninstall Desktop Manager and then reinstall it using the BlackBerry Internet Service option.
Step 2: On your device, go to: Options > Advanced > Service Book, and delete all service books for [Desktop]
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

TB 31.4 when compsing a message, has introduced a spurious blank line between the address boxes and subject box.

When writing a new message I used to see two lines of address boxes followed by the subject line. So, when sending an email to a single recipient, that persons address would remain on screen as I composed the email.
As of version 31.4 the initial "Write" window shows a single address line, the subject line, and a blank line between them. The consequence is that, upon entering the recipient's address, it immediately scrolls up and can no longer be seen. This happens regardless of how I enter the address i.e. start to type, select from address book and hit ENTER or TAB, or indeed if I choose an address from the address book sidebar. (See "capture1.png")
If I increase the space available for the header data in the "Write" window I still get a blank line between the address lines and the subject line (see "capture2.png"). Furthermore, the next time I go to compose an email I am back with the original version of the "Write" window, as shown in "capture1.png".

You might want to drop the author an email and let him know. It is not a major thing, but something that would probably require only a minor fix.
I have found him helpful, but slow to reply. He is always on holidays when I email him.

Error while adding a used relationship between the New DC and the Web DC

Hi Gurus
We are getting the Error in NWDS while Adding a used relationship between the New DC and the Web DC.
Steps what we are Done
1. Create the custom project from inactiveDC's
2.creating the project for the component crm/b2b in SHRAPP_1
3.After that we changed the application.xml and given the contect path.
4.Then we tried to add Dependency to the custom create DC we are getting the error saying that illegal deppendency : the compartment sap.com_CUSTCRMPRJ_1 of DC sap.com/home/b2b_xyz(sap.com.CUSTCRMPRJ_1) must explicitly use compartment sap.com_SAP-SHRWEB_1 of DC sap.com/crm/isa/ like that it was throwing the error.
so, we skip this step and tried to create the build then it is saying that build is failed..
Please help us in this regard.
Awaiting for ur quick response...
Regards
Satish

Hi
Please Ignore my above message.
Thanks for ur Response.
After ur valuble inputs we have added the required dependencies and sucessfully created the projects, then building of the projects was also sucessfully done and EAR file was created.
We need to deploy this EAR file in CRM Application Server by using the interface NWDI.
For Deploying the EAR into NWDI, we need to check-in the activites what i have created for EAR. once i check-in the activites ,the NWDI will deploy the EAR into CRM Application Server.
In the Activity Log we are able to check the Activities as Suceeded but the Deployment column is not showing any status.
When i right click on my activity Id the deployment summery is also disabled.
So finally my Question is that where can i get the deployment log file, and where can i check the deployment status for my application..
Any pointers in this regard would be of great help..
Awaiting for ur valuble Responses..
Regards
Satish

How to sync the data between the two iSCSI target server

Hi experts:
I have double HP dl380g8 server, i plan to install the server 2012r2 iSCSI target as storage, i know the iSCSI storage can setup as high ability too, but after some research i doesn't find out how to sync the data between the two iSCSI target server, can
any body help me?
Thanks

Hi experts:
I have double HP dl380g8 server, i plan to install the server 2012r2 iSCSI target as storage, i know the iSCSI storage can setup as high ability too, but after some research i doesn't find out how to sync the data between the two iSCSI target server, can
any body help me?
Thanks
There are basically three ways to go:
1) Get compatible software. Microsoft iSCSI target cannot do what you want out-of-box but good news third-party software (there are even free versions with a set of limitations) can do what you want. See:
StarWind Virtual SAN [VSAN]
http://www.starwindsoftware.com/native-san-for-hyper-v-free-edition
DataCore SANxxx
http://datacore.com/products/SANsymphony-V.aspx
SteelEye DataKeeper
http://us.sios.com/what-we-do/windows/
All of them do basically the same: mirror set of LUs between Windows hosts to emulate a high performance and fault tolerant virtual SAN. All of them do this in active-active mode (all nodes handle I/O) and at least StarWind and DataCore have sophisticated
distributed cache implementations (RAM and flash).
2) Get incompatible software (MSFT iSCSI target) and run it in generic Windows cluster. That would require you to have CSV so physical shared storage (FC or SAS, iSCSI obviously has zero sense as you can feed THAT iSCSI target directly to your block storage
consumers). This is doable and is supported by MSFS but has numerous drawbacks. First of all it's SLOW as a) MSFT target does no caching and even does not use file system cache (at all, VHDX it uses as a containers are opened and I/O-ed in a "pass-thru" mode)
b) it's only active-passive (one node will handle I/O @ a time with other one just doing nothing in standby mode) and c) long I/O route (iSCSI initiator -> MSFT iSCSI target -> clustered block back end). For reference see:
Configuring iSCSI Storage for High Availability
http://technet.microsoft.com/en-us/library/gg232621(v=ws.10).aspx
MSFT iSCSI Target Cluster
http://techontip.wordpress.com/2011/05/03/microsoft-iscsi-target-cluster-building-walkthrough/
3) Re-think what you do. Except iSCSI target from MSFT you can use newer technologies like SoFS (obviously faster but requires a set of a dedicated servers) or just a shared VHDX if you have a fault tolerant SAS or FC back end and want to spawn a guest VM
cluster. See:
Scale-Out File Servers
http://technet.microsoft.com/en-us/library/hh831349.aspx
Deploy a Guest Cluster Using a Shared Virtual Hard Disk
http://technet.microsoft.com/en-us/library/dn265980.aspx
With Windows Server 2012 R2 release virtual FC and clustered MSFT target are both really deprecated features as shared VHDX is both faster and easier to setup and use if you have FC or SAS block back end and need to have guest VM cluster.
Hope this helped a bit :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

Thanks for your response
Let me give the history - I started with an Apple Express being fed thru a D-Link EBTR 2310 cable Router from an RCA DCM315 Modem (Pure). Comcast service all the way.
Got the 1st generation TC in 2008 and merely replaced the Airport Express with the TC. Worked ok
A year or two ago I did try removing the modem and feeding the TC directly from the modem. Resulted in the same condition I have now - Continuous flashing amber on the TC. So I put the router back in the chain.
Some time later, at the recommendation of a Comcast rep, I replaced the router with (a Belkin F5D 5231) to see if speed and dropout problems would be improved. I thought it helped some at the time but now I am not so sure.
Last week I decided to see if a new modem would help with download speeds. So I got another pure cable modem (Motorola SB 6121- high on the Comcast recommended list).
Got up and running easily with Comcast help and with the modem connected directly to a computer.
Next I put the TC in the link and again could not get past the TC continuing to flash amber. Although I did get connected to the internet with this configuration I lost connection two both of my printers - one connected by USB and the other wirelessly to the TC. Again everything works fine when I put the Belkin router back in the system.
However with the router in there, the modem shows the downstream connection to be 10/100 ethernet speed. (Modem light changes color for indicating speeds.}
I have gone thru all of the combinations of powering down/ up, but all stays the same.
I can live with what I have but something still doesn’t seem right.
Thanks again

Using functional global variables to transfer data between touch screen device and other targets

Hi,
We are currently developing a control system that will operate on a cRIO with a touch screen interface. During development we have been using functional global variables (FGVs) to handle most of the settings/data etc, however we have just realised that we may have an issue updating the data on the touch screen, and vice versa.
Previously we have implemented similar programs using shared variables, however we were wondering if there is anyway to implement FGVs in a similar manner, whether it'd be a combination of FGVs and shared variables.
Regards,
Mike
Software version: Labview 8.2.1

See this thread on LAVA about sharing FGV's across projects. THis should be extendable to cross paltforms (I believe).
You also may want to concider an upgrade to LV 8.5.1. We have found a number of performance related issues with LV 8.2.1 and RT.
If you decide not to upgrade, just remeber what I wrote (above) when you have reason to question the performance.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?

I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?

Many thanks lllaass,
The Touch Copy third party software for PC's is the way to go it seems and although the demo is free, if you have over 100 songs then it costs £15 to buy the software which seems not a lot to pay for peace of mind. and restoring your iTunes library back to how it was.
Cheers
http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CODH8dK46bsCFUbKtAod8 VcAQg

In Mail, my message preview used to be shown to the right side of the messages. Now it is showing below the messages. How can I move it back to the right?

In Mail, my message preview used to be shown to the right side of the messages. Now it is showing below the messages. How can I move it back to the right?

Select the Viewing tab in the Mail preferences dialog and uncheck the box marked Use classic layout.

When ever enter the date start date up to next year same date between the days divided into 8 parts

when ever enter the date start date up to next year same date between the days divided into 8 parts
Q1.1 (YYYY) = 1st half of Quarter 1 for year YYYY
Q1.2 (YYYY) = 2nd half of Quarter1 for year YYYY
Q2.1 (YYYY) = 1st half of Quarter 2 for year YYYY
Q2.2 (YYYY) = 2nd half of Quarter 2 for year YYYY
Q3.1 (YYYY) = 1st half of Quarter 3 for year YYYY
Q3.2 (YYYY) = 2nd half of QuarterQ3 for year YYYY
Q4.1 (YYYY) = 1st half of Quarter 4 for year YYYY
Q4.2 (YYYY) = 2nd half of Quarter 4 for year YYYY
Here YYYY depicts the year.
e.g. Q1.2 (2014) depicts the 2nd half of Quarter 1 for year 2014.
The description of these values are explained below.
The table below provides the description about each value:
Quarter     Quarter Range      Start Date
Q1.1      1 Jan - 15 Feb         1st Jan
Q1.2      16 Feb-31 Mar         16th Feb
Q2.1      1 Apr- 15 May          1st Apr
Q2.2      16 May-30 June       16th May
Q3.1      1 Jul-15 Aug             1th Jul
Q3.2      16 Aug -30 Sep       16th Aug
Q4.1      1 Oct -15 Nov           1st Oct
Q4.2      16 Nov – 31 Dec      16th Nov
The dropdown values in time window needs to be updated as per date entered by the user in the Audit Plan start date and
should display the next four Quarter (each divided in 2 half i.e. Eight values ) along with the year from the selected Audit plan start date.
for eg. If the Plan start date is given as August 10 2013 then the Time window will display the following options:
Q3.2 (2013)
Q 4.1 (2013)
Q 4.2 (2013)
Q 1.1 (2014)
Q1.2 (2014)
Q2.1 (2014)
Q 2.2 (2014)
Q 3.1 (2014)
You can refer to the Table above and look that 10 Aug 2013 falls under the Q3.1 so Time window will display the next next 8 half Quarters ( Total 4 Quarter) till Q 3.1 for the year 2014.

Hello,
WITH half_quarters AS(
    SELECT ADD_MONTHS(TRUNC(DATE '2013-08-15','Q'), 3*(LEVEL - 1)) hq_start
           ,1 part
    FROM    dual
    CONNECT BY ROWNUM <= 5
    UNION ALL
    SELECT ADD_MONTHS(TRUNC(DATE '2013-08-15','Q'), 3*(LEVEL - 1) + 1) + 15 hq_start
           ,2 part
    FROM    dual
    CONNECT BY ROWNUM <= 5
,ordered_half_quarters AS(
    SELECT hq_start
           ,part
           ,ROW_NUMBER() OVER (ORDER BY hq_start) r
    FROM    half_quarters
    WHERE   hq_start > DATE '2013-08-15'
SELECT 'Q '||TO_CHAR(hq_start,'Q')||'.'||part||' ('||TO_CHAR(hq_start,'YYYY')||')' q
FROM    ordered_half_quarters
WHERE   r <= 8
ORDER BY r;
Q
Q 3.2 (2013)
Q 4.1 (2013)
Q 4.2 (2013)
Q 1.1 (2014)
Q 1.2 (2014)
Q 2.1 (2014)
Q 2.2 (2014)
Q 3.1 (2014)
half_quarters generates the start dates of every half of a quarter, starting with the begin of the first quarter that contains the sample date.
The next step is to order the dates and to select only those after the sample date.
The last part formats the output and orders the data.
Regards
Marcus

Verify the data between SAP R/3 and SAP BW

Hi Experts,
How to verify the data between SAP R/3 and SAP BW at the time of data mismatches in reports.
give me the proper solution.
Thanks,
Syam

Hello,
You must know what is the infoprovider source of the data shown in the report.
Once you know it, check the content filtering by same restrictions as in the mismatch report. Now you have the data in BW.
Then you have to know the proper transation or table in R/3, from where the extractor retrieves the data to populate the infoprovider; make same restrictions and compare it with data in BW.
Regards

Max date data between the input date range.

Hi
I need to get the maximum date data's with in the date range.
Ex: this is sample date but , total records in DB around 2000.
NAME DATE Product1 Product2
aaaa 01/05/2011 5 5
aaaa 03/05/2011 3 3
bbbb 04/05/2011 6 6
bbbb 07/05/2011 2 2
aaaa 06/05/2011 1 1
case :1) If the user input date is 01/05/2011 to 05/05/2011
then the result should be
aaaa 3 3
bbbb 6 6
case :2) If the user input date is 01/05/2011 to 10/05/2011
then the result should be
aaaa 1 1
bbbb 2 2
so my result is purely based on max date between the input date range.
how to achieve the result

Dhiva wrote:
Hi
I need to get the maximum date data's with in the date range.
Ex: this is sample date but , total records in DB around 2000.
NAME DATE Product1 Product2
aaaa 01/05/2011 5 5
aaaa 03/05/2011 3 3
bbbb 04/05/2011 6 6
bbbb 07/05/2011 2 2
aaaa 06/05/2011 1 1
case :1) If the user input date is 01/05/2011 to 05/05/2011Jan 05 to May 05
or
May 01 to May 05
what date is 07/08/09?

I bought a new Panasonic camcorder to edit in iMovie 10.0.3. I need to choose between the AVCHD choices and the ALL MP4/iframe choices. I don't have a clue as to which to use. I just want to burn video to DVD to have and share. Thanks for any help.

I bought a new Panasonic camcorder to edit in iMovie 10.0.3. I need to choose between the AVCHD choices and the ALL MP4/iframe choices. I don't have a clue as to which to use. I just want to burn video to DVD to have and share. Thanks for any help.

It sounds like you have assigned the primary click on the trackpad to something else, perhaps a gesture.
Use your mouse, login and then open the Trackpad preference pane and see how you have the interface configured.
Oh and you can have both the Magic Mouse and Magic Trackpad powered up and working at the same time. No need to keep moving batteries around.
Tom

How to exchange data between the html in the form layout and itsparameters?

i am trying to rephrase a question i asked a few days back and which yielded no response.
is there any way to exchange/transfer values or data between the html in the form layout editor and the form parameters?
for instance, is there any bridge such that the form template design (controlled by some html-based attribute), or the display property (again managed by some string value for the style:display attribute) of some of its divisions etc could be controlled by the values passed to some parameters of a portal form?
has any body ever tried to do it or thought of doing it? or it's inherrently beyond the portal forms capacity?
folks, any clues or hints on 'yes, that's how' or 'no, and that's why not!' please? will greatly appreciate.
Naqvi

i am trying to rephrase a question i asked a few days back and which yielded no response.
is there any way to exchange/transfer values or data between the html in the form layout editor and the form parameters?
for instance, is there any bridge such that the form template design (controlled by some html-based attribute), or the display property (again managed by some string value for the style:display attribute) of some of its divisions etc could be controlled by the values passed to some parameters of a portal form?
has any body ever tried to do it or thought of doing it? or it's inherrently beyond the portal forms capacity?
folks, any clues or hints on 'yes, that's how' or 'no, and that's why not!' please? will greatly appreciate.
Naqvi

"Message is used to carry data between the BlackBerry handheld and an associated server"

Similar Messages

Maybe you are looking for