Message, 'It is necessary to eject a disk.....', Message, 'It is necessary to eject a disk.....'

I keep receiving a warning about improperly ejecting disks when I wake my laptop from sleep. I make it a habit to eject disks correctly, even my iPhone after synchonising with iTunes. The only disk permanently connected to the computer is my Time Machine backup and that is connected via the Thunderbolt (?) port.
Is there a way that I can turn off this annoying message. I agree that it should display when approrpiate but not all the time. (Mac OS 10.8.1)
David Amies

This should get you started
http://www.fcpxbook.com/CustomProjectSize.html

Similar Messages

I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I runni

I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I running the computer. Is the hard drive damaged as laptop doesn't seem to recognize the start up disk ? If so, I presume I will have to put in a new one.
There haven't been any problems with the computer, apart from a sticky curser,I have run a permissions programme from disk utility, there were a lot of different ones, but it seem to be able to fix them.
Any comments or ideas ?
Thank you in anticipation.

First backup your users files off the machine to a external storage drive (not TimeMachine!)
Most commonly used backup methods
Next to startup from the disk, have it inserted, hold c or option/alt (wired or built in keyboard) and then boot the computer and or select the disk when it appears and click the arrow.
Disk Utility is under the Utilities menu on the second screen.
Step by Step to fix your Mac
If you used the wrong 10.6 disk, it will spit it out or have issues, use the one that came with that machine or if it's defective, call Apple for a new one.

How do I view and open all my files again that are on my external hard drive?? Error message saying 'The disk you inserted was not readable by this computer' Three options are Initialize, Ignore or Eject.

I have recently purchased Toshiba 1TB hard drive and I set it up and I was able to transfer all my files onto it such as my music, photos, documents. I had correctly ejected and used it again and all these files were safely stored and accessible afterwards. However after I rebooted my computer as it had been going slow and I had too much clogging it up once I reconnected the external hard drive I have error message saying 'The disk you inserted was not readable by this computer' Three options are Initialize, Ignore or Eject. How do I access all my files? I set it up to work on both mac and windows. I have tried both another mac and windows computer and same issue occurs?? I am worried that all my personal files are gone but am confused as the drive has had absolutely no damage to it as it was in a very short time frame and its never left the same spot. Any help would be greatly appreciated. Thanks

Thanks for your quick response. I had a look at your discussion... I tried it on a Windows machine and I thought that was compatible with ExFAT?
Therefore I need to attempt to use my external hard drive with a machine that boasts OS X 10.6.5 or above and then it should work?
Thanks

Ever since upgrading to Lion I keep getting the error message "disk was not ejected properly."

Ever since upgrading to Lion on my iMac G5 Intel Core 2 Duo, I keep getting the error message "disk was not ejected properly." I have repaired permissions and reformatted my external LaCie 2TB USB hard disk, but the error continues. I use this disk for my Time Machine backups. This always seems to happen when the computer wakes from sleep, but not consistently. The computer was asleep overnight and backed up as soon as it awakend this morning. Two hours later I get the improper ejection message. I have used the same external disk with Snow Leopard (all versions), but never had this error message or problem. This disk has been in use without any problems since February, 2011. Upgrading to Lion is when this problem began. This is the below message (but from online image from Snow Leopard, but Lion message is essentially the same).

I had a similar issue. Mine was with a Seagate GoFlex drive. The solution was to install GoFlex for Mac 1.1.2 which included a 64-bit driver to disable the drives built in sleep timer:
http://www.seagate.com/ww/v/index.jsp?locale=en-US&name=goflex-mac-install-softw are&vgnextoid=77002aaf8cc5d210VgnVCM1000001a48090aRCRD
I document how I discovered this in my blog post:
http://www.innerexception.com/2011/10/tale-of-computing-misery-how-to-fix.html

Error message "disk was not properly ejected" while syncing to iPod Classic

Hello,
I am having a terrible problem with my iPod Classic. All was fine until this morning. For some reason now when I try to sync iPod I receive several error messages. The iPod will start syncing slowly then I receive "Disk was not properly ejected". At this point the iPod disappears from left side of iTunes. The iPod still says "connected". After I click "ok" on error another error message appears saying "iPod cannot be synced, disk could not be read from or written to".
Please help, my music is all I have as I am wheelchair bound.

To be clear, I'm unsure whether or not iOS 6.0 is the latest iPod Touch software but I did get this error message when I attempted to update:
I hope this helps. Thank you!

Importing CD - No Disk Error Message When Ejecting CD

Every since I upgraded my itunes to the latest version, I am getting an error message telling me there is no cd every time I eject my cd after importing. It gives me an option to retry, continue and cancel. No matter what I pick it does not recognize the next cd and my windows cursor is stuck in a rotating hourglass position even after I end the itunes program! Can anyone please shed some light? Thank you!

Thanks Bob! My problem was that I was following advice from elsewhere on the internet that said I should burn a DVD in UDF format when in fact just burning it using disk utility in ISO made it work. Thank you so much!

Time Machine backups cause error message "Disk No Ejected Properly"

I have a 2011 iMac using OS X version 10.9.4. I have had to change the external hard drive used with my Time Machine to get more storage. Every time the Time Machine backs up (every hour), I get the message "Disk Not Ejected Properly" Eject "FreeAgent GoFlex Drive" before disconnecting or turning it.
I am concerned about any damage that is happening because of this message. I researched this on this forum and other users had a similar problem. I tried 2 of the easier solutions: 1) make sure none of the boxes are checked in System Energy Saver (ie. put hard disks to sleep when possible, etc.) and 2) buy and connect a USB hub that has it's own power supply to keep the external hard drive powered constantly. Neither of these solutions has worked for me. I still get the message. So I have two questions. First, is damage being done to my computer because it "thinks" that I did not properly eject the disc. And, second, is there anything else I can do to stop this message besides not using the freeagent disc?

I had the same problem. it turned out to be a cable issue. Contact seagate for replacement cable.
http://www.seagate.com/support-all/

I am getting error message "Disk Not Ejected Properly Eject "FreeAgent GoFlex Drive" before disconnecting or turning it-" randomly.

I'm getting a "Disk Not Ejected Properly Eject “FreeAgent GoFlex Drive” before disconnecting or turning it…" message at random times. I have seen other comments about this happening after the iMac wakes from sleep. However, this is happening to me throughout the day even when I am working on the iMac.
The iMac is up to date with OS X Version 10.9. I had recently switched from a 500GB to a 3TB Drive, both are Seagate. I have never had this issue prior to the switch.
Has anyone else experienced this issue?
I verified/repaired in the Utility Disk and a message popped up indicating the GoFlex looks "OK".

No, I am not on the USB3 interface. I contacted Seagate and they indicated that there is no known issue with OS X 10.9. In my case, they are willing to send me a new Drive, since I just received the GoFlex on 12/06. Will post an update when I install the new one. Hopefully this will solve my issue.
I suggest you contact Seagate, if you haven't already, directly. The representatives are very helpful. Good luck.

My external LaCie drive gets an error message "the disc you inserted was not readable by this computer." The only options offered are "ignore" or "eject" Disk Utility sees the disc but does not give a repair option. What can I do?

When I plug in my external LaCie drive I get an error message "the disc you inserted was not readable by this computer."
The only options offered are "ignore" or "eject"
Disk Utility sees the disc but does not give a repair option.
What can I do?

The good thing about mac-centric resellers such as OWC, is they have people on staff that can answer questions without you buying things first. They also have how-to information, and instructions are included in many of their products. I saw a link to watch a DIY video in one of their pages; an example of a RAID (with its own power supply) is shown on their drives page. Also a few in there, with no power supplies, for less money.
If I were looking to backup and perhaps also have a partition for a system clone, I'd consider something like one of these: http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
Some ideas on the RAID backup methods appear in google search, some of the pages are ideas and concepts; and the better ones also warn about using RAID for the only backup plan.
Oh, OWC has live chat. Haven't tried it, nor have I bought anything from them. I have what appears to be two products from them, but have not used either. One is in a box as-new, but has only USB2.0 ports & my Macs needed FW400/800. It has been said their RAM is a good way to upgrade, too. But I can't confirm!
A 'RAID-ready' unit for backup may be more versatile for just that, but I have not checked into these details. I use single HDDs in powered enclosures, and usually manually make backup clones to FW drives, of bootable OS X systems. Some of the OWC raid-ready use eSATA ports so that may not be viable for a computer without them.
The unused in-box external drive I have is like the base model in the link above. However mine is USB2.0 (maybe) and won't boot my older Macs due to hardware variance; and my preference would be for FireWire options, these models do offer that. But the one I have does not. Dual 500GB HDDs, and they could be used in tandem as a RAID. That would be a choice set up in software. I'm not sure and not interested enough to read up just now.
My backup method is not automatic, or a moving backup plan, if I don't get a move-on and make full system clones. I do make copies of photos and documents the manual way, to USB external drives; and occasionally backup to DVD or CD media. And USB flash, that helps to move files between computers without need to use file sharing via wi-fi. {Like Why fly? Walking is better exercise unless one is a bird. Squawk!}
https://www.google.com/#q=raid+backup+mac
Depending on the ports in your Mac, you may be able to use other cables to attach between a backup or externally enclosed hard disk drive with multiple partition and bootable clone in one of them. Not sure about the Thunderbolt, and where that is the main port, adapters are required to access other devices, as allowed.
Anyway, I am going on and on, yet not really saying anything.
My ideas would not be all that interesting to follow as a backup
plan when matching available newer hardware to task, but you
can get some into better ideas if you are not in a rush. Get a
good setup and then look into more an betterer stuff.
Good luck & happy computing!

My iMac is disconnecting all my media hard drives and giving "Disk Not Ejected Properly" message since updating to OSX 10.9

Ever since I updated to OSX version 10.9 on my iMac, it is disconnecting all of my media hard drives and giving me the message: "Disk Not Ejected Properly." My hard drives are connected to my iMac through a Nitro Professional 8-port Firewire 800 hub/repeater, and a Firewire 800 cable from the Nitro hub connects to the back of my iMac. This configuration has been working fine for over a year. Suddenly, and immediately after performing the update about a week ago, the drives won't stay connected for more than a few seconds before the iMac disconnects from my drives. I've tried restarting and reconnecting many times and the same thing keeps happening.
I have a new MacBook Pro (one month old) that I've been using temporarily to work with my photos and video on these drives as the drives are able to stay connected to this computer—I put a Thunderbolt adapter onto the Firewire 800 cable to connect to it. Luckily I had not yet updated it to the new operating system and I am afraid to do that. I've had the persistent message that Updates are available for my computer on my MacBook but I will not perform any updates for fear that I will lose access to my media drives. I am a professional photographer, so it's pretty disasterous if I can't access my drives. Please advise me what to do to keep my hard discs connected to my iMac and what to do to keep this from happening with my MacBook.
Thanks in advance for your knowledge and assistance!

Hello Roma2001,
Thank you for the details of the issue you are experiencing with your FireWire hub.
I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
USB and FireWire Quick Assist
http://support.apple.com/kb/HT1151
Thank you for using Apple Support Communities.
Best,
Sheila M.

I have a 1TB WD external hard disk, which suddenly cannot be detected in my system. When i connect the hardisk to the macbook, the disk appears and immediately disconnects with the message "Disk not properly ejected". Any advice ?

I have a 1TB WD external hard disk, which suddenly cannot be detected in my system. When i connect the hardisk to the macbook, the disk appears and immediately disconnects with the message "Disk not properly ejected". Any advice ?

verify on another Mac if the same
WD is having issues with mavericks as you can see on the WD forum, did you install any WD software (never do that) when you connected the drive for the first time?
possible issue is a dead SATA bridge card or the new WD firmware w/ Mavericks.
SATA card issue
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
http://community.wd.com/t5/External-Drives-for-Mac/bd-p/passport_mac
verify on another Mac if all possible

I unplugged a USB data device without ejecting it properly via 'Finder'. Now whenever I plug in the device I received an error message stating that the 'disk was not ejected properly

Now when I plug in the device I receive an error message stating that the disk was not ejected properly & that next time I connect the 'disk', MAC OS X will attempt to repair any damage to the information on the disk.
It has not repaired.
The data I am trying to import is photos & even when I change to a different SD card I receive the same message.
I am a recent convert from Windows and am new to the MAC way of things.

You can repair the SD card using Disk Utility.
I suggest you copy the photos from your SD card, if you haven't done so already, before using Disk Utility to repair your SD card.

The Dreaded 'Disk Wasn't Ejected Properly' Error Message

Hi,
brand new machine - hooked up an external USB 3 drive and switched Time Machine on.
When the computer sleeps, it awakes to 'Disk Wasn't Ejected Properly' error message.
Apple Support weren't much support, they had NO fix.
Any ideas?

If your OS is 10.8.5 then this is a known issue. A fix is in the works.

I updated to Mavericks and now I can'burn any DVD's any more. I get the following error message and the disk is ejected: The disc can't be burned because an unexpected error occurred (error code 0x80020000)

I updated to Mavericks and now I can'burn any DVD's any more. I get the following error message and the disk is ejected: The disc can’t be burned because an unexpected error occurred (error code 0x80020000)
I did burn the same way in MAC OS X 10.6.8. with no troubles!
Can anyone please help me out?
I use for years DVD-R of TDK 4.7GB 16X.

Hey topo27,
I would try out the following and see if it helps:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Welcome to Apple Support Communities!
Cheers,
Delgadoh

"Disk not ejected" message appears randomly

The "disk was not ejected properly" message is continuously coming up on my screen.
When "eject" has been highlighted I have clicked on it, but the message still appears from time to time apparently randomly?
can anyone help please?

Disk is probably going bad. The system is seeing the disk problem as an eject. Backup the data on that disk.
Allan

Message, 'It is necessary to eject a disk.....', Message, 'It is necessary to eject a disk.....'

Similar Messages

Maybe you are looking for