Message light on, getting 3 beeps, no voicemail
The message light is on and when I lift the receiver I get the 3 beeps that indicate that there is a voicemail message. When I press *99, there is no voicemail. I have also verified on line that there are no voicemails. How do I get the message light to go off and the 3 beeps to go away so that I will know when I really get a voicemail.
delj wrote:
The message light is on and when I lift the receiver I get the 3 beeps that indicate that there is a voicemail message. When I press *99, there is no voicemail. I have also verified on line that there are no voicemails. How do I get the message light to go off and the 3 beeps to go away so that I will know when I really get a voicemail.This is the "phantom" stutter tone, indicator light.... Use a different phone and calll your number and leave yourself a VM.... using your phone, retrieve the VM and delete it... you should now have no indicator light or stutter tone...-=Ray=-
Similar Messages
-
My iPhone 6plus will no longer connect to my Dodge UConnect system. Phone calls get a beep "phone call completed" message. Music will play though. Just can't make calls. Tried turning off iCloud and repairing but nothing works. It did work a few days
Hi Jpcbew,
The article linked below provides a lot of great information and troubleshooting tips that can help you resolve the issue with your iPhone 6 Plus connecting to you car stereo system.
Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
So long,
-Jason -
Message light reverts back to GREEN before checking messages!
Hi-
I've asked T-Mobile this question and they are clueless. If I get messages to my BB while I'm asleep at night, the message light reverts back to green...it does not stay red until I have retrieved the messages from the phone. I thought the idea of having it change colors was so one could visually look at the phone and know if they have a message or not. As it is now, I have to actually check the phone physically, to see whether or not I have any messages because the light eventually reverts back to green. I'm not sure how long it takes for this to happen as I'm asleep but I would venture to say maybe a few hours at the most before it changes back to green (I have my network light on always as I like the flashing green).
Any suggestions or is the phone suppose to operate like this? If so, it kinda defeats the purpose of having a message light.
Thanks.I have had four different models and they have all done this, I don't believe it is something we can change. Or atleast I haven't found it yet.
Message Edited by tschweitzer on 07-25-2008 10:14 AM -
Hp compaq dc 7700 won;t start red light blinking with a beep
my pc won't start i get a beeping sound and front red blinking light ,help
Hi:
Please read the troubleshooting guide at the link below, appendix A starting on page 57 for the blink/beep codes, probable causes and possible solutions.
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01302202/c01302202.pdf -
I recently ran monolingual and removed all but the intel-64 bit architectures. Now my iphoto (along with Idvd, garage band, imovie) will not open. Here is the message that I get.
Process: iPhoto [3543]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: ??? (???)
Build Info: iPhotoProject-4750000~1
Code Type: X86 (Native)
Parent Process: launchd [109]
Date/Time: 2011-06-10 21:48:59.821 -0500
OS Version: Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report: -4164908 sec
Crashes Since Last Report: 8
Per-App Crashes Since Last Report: 11
Anonymous UUID: 45357CCD-011B-482E-A2EA-CF42096F1321
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: no suitable image found. Did find:
/Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
/Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <1C06ECD9-A2D7-BB10-AF50-0F2B598A7DEC> /usr/lib/dyld
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.53f13
Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 2.1.14.5
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Serial ATA Device: ST31000528ASQ, 931.51 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0x24300000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0x24400000
USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x0901, 0x26400000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26500000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x06110000Please let me know when you find a fix. I did the same thing and have tried every suggestion I can find online. The message I get is...
Process: iPhoto [4991]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: ??? (???)
Build Info: iPhotoProject-6070000~1
Code Type: X86 (Native)
Parent Process: launchd [142]
Date/Time: 2011-06-13 23:39:38.485 +1200
OS Version: Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report: -1643976 sec
Crashes Since Last Report: 35
Per-App Crashes Since Last Report: 12
Anonymous UUID: D4811036-EA8D-479D-8D9F-11E2FC8F6D4C
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: no suitable image found. Did find:
/Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
/Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <1C06ECD9-A2D7-BB10-AF50-0F2B598A7DEC> /usr/lib/dyld
Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.36.9)
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545025B9SA02, 232.89 GB
Serial ATA Device: MATSHITADVD-R UJ-898, 3.5 GB
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26100000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24600000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06610000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x06500000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0x06300000
I have reinstalled Mac OSX 10.6.3 and done the updates from there.
I have reinstalled ilife 11 from disk and done the updates.
I have deleted all the suggested files and then redone install and updates.
I have tried just reinstalling iphoto and doing updates.
Is there any way to get a replacement - /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow
file with the right architecture? -
My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer. The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that. Anyone know how to fix this?
Hello there philp_69,
If I understand correctly it sounds like your phone hasnt been recognized in iTunes on your PC since the last couple of updates. I would use the troubleshooting in the following article which will walk you through the steps one by one.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Message is not getting displayed.
Hi all,
I have a form with KEY_COMMIT Trigger with the code below:
DECLARE
cls_date DATE;
Duration NUMBER;
int_rate NUMBER(3,2);
PA_AMT NUMBER(10,2);
TRMS NUMBER;
I_RATE NUMBER(4,2);
pl_id ParamList;
usernm VARCHAR2(20);
OLD_FDR_NO NUMBER;
BEGIN
PA_AMT:=:KEC_FDACCT_MSTR.AMOUNT;
TRMS:=SUBSTR(:GROUP_TYPE,1,2);
commit_form;
SELECT INT_RATE INTO I_RATE FROM FDSLAB_MASTR WHERE GROUP_TYPE=:GROUP_TYPE AND FDSLAB_NO=:KEC_FDACCT_MSTR.ACCT_TYPE;
DUARATION_DTL(PA_AMT,TRMS,I_RATE);
message('3- I want this message to be displayed.This is not getting displayed');
message(' ');
SELECT sap_code INTO :KEC_FDACCT_MSTR.sap_code FROM FDSLAB_MASTR WHERE GROUP_TYPE=:GROUP_TYPE AND FDSLAB_NO=:KEC_FDACCT_MSTR.ACCT_TYPE;
commit_form;
END;
In the above code, you can find DUARATION_DTL(PA_AMT,TRMS,I_RATE);
DUARATION_DTL is a Procedure which is coded in the Program Unit with the below code.
PROCEDURE DUARATION_DTL(PAMT NUMBER,QTR NUMBER,RATE NUMBER) IS
.........SOME variables declared..........
BEGIN
SOME IF ELSE statements
SOME INSERT statements
SOME UPDATE statements
COMMIT;
message('FDR No Saved Successfuly'||:KEC_FDACCT_MSTR.ACCT_FD_NO);
message('');
END;
When I run the form, Message('3') that is the message marked is not getting displayed.
Only the message in procedure DUARATION_DTL that is in green is getting displayed.
Can you let me know why?
Is there anything i should do to display this message,
Or is it because its buggy??
Help me please.
Thank You.
Oracle Forms 6i.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - ProductionHi AW, I actually don't want to display that message.
I want to know why is that message not getting displayed??
Is that because of the following Triggers??
Trigger:ON_MESSAGE:
if MESSAGE_CODE = 40400 then
message('FDR information saved successfully.');
message('');
else
message(MESSAGE_TEXT);
end if;
Trigger:ON_ERROR:
if ERROR_CODE = 40202 then
message('This field cannot be blank');
message(' ');
RAISE form_trigger_failure;
elsif ERROR_CODE = 41800 then
message('List of values is not available for this field.');
message(' ');
RAISE form_trigger_failure;
elsif ERROR_CODE = 40401 then
null;
else
message(ERROR_TEXT);
message(' ');
RAISE form_trigger_failure;
end if;
These above mentioned triggers are present in the form.
Is it because of these triggers , that the message is not getting displayed??
If yes, can you tell me why? -
Message details not getting displayed in Message monitoring of RWB
Hi,
I am trying to see how many messages in Message Monitoring by selecting Integration Engine option, Message counts are getting displayed like how many has been processed successfully,processed with errors as well.
When I click on message count a pop up screen opens and gives me no messages are not available even for the same day messages.
Can any body give me an idea like where i can set any parameter to display in detail of messages in integration engine for one week back as well.
Thanks...>When i click on count of messages which got processed with in one hour then it shows details of that messages, but when i select other messages which got processed on the same day but more than one hour then its not displaying any details of the messages.
I guess in this case your retention period is set to zero in SXMB_ADM. And this is the reason you cannot see the message even if they are an hour old.
>Is there any where where we can set parameters or any oss note to be implemented in order to see details of any messages with in a week or 10 days.
In XI run tcode SXMB_ADM and then follow "Integration Engine Configuration ---> Specific Configuration". Now check the Archive & Deletion Current & Default Values and set the Retention period as per you need.
For more information see page 11 of this document.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50?quicklink=index&overridelayout=true -
I deleted some of my text message histories to get rid of 'other' space (6.33 gb). They were gone from iMessage, but they still showed up in search, so they were still taking up space on my phone. I synced my iPhone (4s) with iTunes but the messages are still there. How can I get rid of these texts for good and have more space on my phone? 6.33 gb of other space is way too much, thats almost half of my overall available space (13.5 gb.) I don't want to reset my phone and lose all my other texts/ app progress/ photos. I do have backups, but when I restore from the backup the other space comes back along with everything else. What can I do to get rid of this other space and the 'deleted' text messages? (I'm running iOS 6.1.3 if that helps)
But once again, I do not want to lose my other texts, app progress, and photos. I could sync the photos but i would still lose the app progress and texts. I would only restore if it was the only option left, but the other space, as already stated, isnt the main concern. The main concern is those 'deleted' texts. If they go, then a good size chunk of the other space goes. I know you CAN delete texts for good. It worked fine before. All i want to know is why its not working for me now, and how to fix it.
I also know that when you delete texts on your iphone, they get marked for deletion, however they stay on your device (thats why they show up when you search for them.) then when you sync your device with itunes, the texts marked for deletion should disappear. When i synced they didnt disappear. Thats what i need an explanation/solution for. Why the texts marked for deletion didnt get fully deleted after the sync. -
i cannot open iphoto- the message I am getting says Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command-
I tries and it doesnt work!!What version of iPhoto? Assuming 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Has any one experienced not being able to send mail and only receiving some? I get the message " can not get mail. No connection to the server! " Yet I get some mail but can not send out any. My iPad is only 1 month old! It worked perfectly for about 10 days.
Thx
AgnesHey agnesfromcopenhagen k,
Thanks for the question. I understand you are experiencing issues with Mail on your iPad. The following resource provides some troubleshooting steps. What kind of account are you using? Some internet providers require that you be connected to your home Wi-Fi (or for work accounts, inside your corporate Wi-Fi/firewall). Also, some email accounts require two-step authentication. For more information, see this resource:
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Thanks,
Matt M. -
Out of nowhere my daughter, who uses a Samsung Galaxy Victory phone is no longer receiving my text messages but I get hers. How can I fix this. I have a 4S and have updated to the ios 7.0.4.
http://support.apple.com/kb/ts2755
if the link provided doesn't help, then you will need to contact your phone carrier as SMS is a carrier feature. -
Installation of latest itunes update stopped, gave error message "couldn't find MSVCR80.dll" Suggested reinstall. Tried but got same message. Now get same error message when I try to open itunes. Help!
Hey jeight26,
When you uninstalled and reinstalled iTunes, did you use this article?
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
If you haven't already done these steps, this section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Sincerely,
Delgadoh -
I am trying to re-install Creative Suite 5.5 Design Standard on my Widows 7 Professional computer after I had to replace the hard drive. I keep getting error message and I get "Exit Code 15: Media DB Sync failed". I have run C Cleaner with same results. Have Disabled UAC and Startup items and Services with no success. Please help - frustrated to no end. Can someone help me?
make sure you're using the adobe cleaner, not crap cleaner, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
copy the installation files to a desktop folder and install from there. -
Unable to get Quick time movies to play on my imac. This is the error message I allways get.
"The document “4-20130701090400-7.mp4” could not be opened. The movie is not in a format that QuickTime Player understands.You may need to install additional software to open this type of file."Download and install VLC Player. It plays more formats and is free and highly regarded.
http://vlc-media-player.en.softonic.com/mac
Cheers
Pete
Maybe you are looking for
-
Report output from memory to internal table (corresponding fields)
How can we pick any standard report output such as RM07DOCS on to memory and from memory to an internal table.Here by internal table ,i do not mean of type c containing complete report but data should go from output to corresponding fields of interna
-
Help needed exporting from Lightroom 4 to Photoshop CS6
I'm running LR 4.4 and Photoshop CS6 on an iMAC and I'm having issues with the edit in photoshop option. Used to be able to right click and image, go to Edit In and choose Photoshop CS6 and Photoshop would open and the image would open. I could the
-
Http Client hit without fiddler error in WIndows 8 Apps
Hi All In production of my windows 8.1 App. Whenever I hit the service it fails and returns me an error. Whereas if I start the fiddler and exempt all win8 config, then it hit the service. Is there anything required for win8 apps to be done on a fres
-
Ipod update does not finish, itunes wont recognise ipod!
i recently installed the latest itunes. BIG MISTAKE!! when i connect my ipod and open itunes, it says "determining gapless playback information" and starts going through all the songs on my ipod (a very long process). so i sit this out, and it wants
-
Business Document Navigator...attaching a URL
hi all.... We have requirement wherein we have to attach a URL to an object through OAOR (Business Document Navigator). As per SAP documentation on link below http://help.sap.com/saphelp_nw04s/helpdata/en/cb/a48d384ba2a767e10000009b38f8cf/framese