Message Listener Not Working

Hi,
We are using MII 12.0.2 (88). We have connected with SAP ECC and we are receivng iDoc mesg from SAP and processing thru message listener and processing rule editors.
This connection was successful and we are able to recive all iDoc but suddenly on this is not working as only one type of iDoc are getting. But in SAP all are showing as Successful in WE02 tranx. We have checked in SM58 and other queues also. But in MII we didnt receive any iDoc except particular iDoc.
We are seeing this error in log "Could not save IDoc messages to the database"
and location as "com.sap.xmii.databuffer.server.JCoIDOCServer".
What is the problem and how to solve it.
Regards,
Senthil
Edited by: senthil kumar on Jun 7, 2011 5:08 PM

Hi Senthil,
Did you mean that you were receiving a variety of IDocs before and now you only receive one type?
Or did you just try a new type and fail?
Check to make sure the Partner Profile's Outbound Parameters and the Distribution Model both are set properly for the IDoc types.
Regards,
Mike

Similar Messages

E75 messaging application not working

Hi,
I have recently purchased an E75 and at first glance it looks to be very nice. However, now i have run into the problem that messaging is not working properly. The message indicator is telling me that I have 6 new messages. When I try to go menu>>messages the application tries to open but immediately crashes. Also when I try to open the messages directly by clicking on them from the message indicator the same behavior seems to happen.
Has anybody experienced the same? How do I get rid of these messages if I can't open them?
Any help is appreciated, thanks.
Porthos
Message Edited by porthos on 13-Oct-2009 02:54 PM

I've had similar problems with my E75.
I've found that Nokia Messaging simply gets confused & over-loaded, and gives up.
Try accessing you email account from your computer.
Then, delete all of your messages from your inbox & sent folders.
Basically, purge as much as possible.
Then try accessing it from your E75.
This usually works for me.
Message Edited by car2fast4you on 02-Nov-2009 05:33 PM

Not sure why Message is not working on my ipad.

Not sure why message is not work on my iPad. It works find on my iPhone.

http://support.apple.com/kb/TS2755

My I message is not working, since IOS 8.3 update.

My messages is not working properly, since IOS 8.3 update. Message are left hanging as undelivered. When I tap on "try again" nothing happens. Even messages to known contacts with I phones, appear in green and does not get delivered anyway. I have reset my i phone several times to no avail. I like my I phone 6+ as a camera. All other functions are less than impressive.

Hi iambackbaby,
In order to help resolve this issue where you are unable to send messages from your iPhone, please follow the directions in the link below.
If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
Take care,
Alex H.

I upgraded my 3gs to ios5 and the sound of the messages is not working well, it's slow and my bluetooth definitions are not stable how can i get back to the ios4

I upgraded my 3gs to ios5 and the sound of the messages is not working well, it's slow and my bluetooth definitions are not stable how can i get back to the ios4

App Store->Purchased
iTunes->Purchased->Download All

After doing last Mavericks update, Messages is not working properly

Since yesterday, after doing last Mavericks update, Messages is not working properly - the Dock icon is not bouncing nor showing any number for new messages. Very annoying, since I usually have Messages on background while working and I now i don't realize if people is chatting me unless I open the messages wondows.

Hi,
Check System Preferences > Notification is set for Messages
In Messages > Preferences > General Section change the Sound option for Message Received.
Restart the app and test this sound is (still) playing.
Place app in background an iMessages "yourself" form your iPhone.
Does the sound Play ?
10:18 pm Wednesday; November 13, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

TS2755 the pic butten on messages is not working. can not send or recieve photos. please help.

the pic butten on messages is not working. can not send or recieve photos. please help.

Hi Beharley,
try resetting your network settings: Settings - General - Reset - Reset Network Settings. This works fine if something is messed up with your carrier bundle.
Regards, Peter

Fetch new mail messages does not work

On my notebook the fetch new mail messages does not work
Settings:
- Fetch new messages: every minute
- Play sound Purr
I need to us the manual button.
On my imac it works fine with the same accounts

My mail sounds are all screwed up. I hear the plane fly when I send an email but when I receive mail, no sound. I have rules set up which worked in Tiger. One rule is for mail to play a message "You have a message from "John Doe" when I receive an email from "John Doe" but it only plays when I send "John Doe" and email. Assbackwards.
Sometimes when reading new mail, it just disappears. I have to click on it again. I find this version of email to be very flaky!
Dave Brenneman

N8 - Messaging Shortcut not working

nokia n8 - messaging shircut not working. Only conversations shortcut is working.

Sounds like a hardware fault,
You'd need to take the phone to a nokia care point and let them take a look

I just purchased myself an iPad. I set it up and now my messages will not work on it.

I need help restoring my messages to my iPad.

The title of your post says "now my messages will not work".
The text of your post says "need help restoring my messages".
Doesn't make sense.
Is this an iMessage problem or Mail problem?
 Cheers, Tom

How do I clear the message usage under settings to open ip more space on my phone? Clearing the actual messages will not work.

How do I clear the messages in order to free up storage space? Just clearing the actual messages will not work!!!

It doesn't sound like the Exchange environment is configured in a manner to support these types of clients very well. Have your Exchange team look at the following
http://blogs.technet.com/b/exchange/archive/2012/11/26/supporting-windows-8-mail-in-your-organization.aspx
http://blogs.technet.com/b/exchange/archive/2013/10/18/supporting-windows-mail-8-1-in-your-organization.aspx
From the latter article: "Communications applications can connect to a corporate Exchange service
configured to require certificate-based authentication. User authentication certificates can be provisioned to Windows 8.1 devices by administrators or end-users can browse to certificate and install to user certificate storage."
You might want to:
Ask your Exchange team the public URLs (ExternalURL) for Exchange OWA & ActiveSync
Open the OWA URL in your Internet Explorer from your Surface
If you get a Certificate warning, open the certificate and select Install (NOTE: You may have to install the entire certificate chain). Your desktop support team should be able to support this because it is the SAME process for standard Windows 8x
desktops.
Confirm that you can open OWA on your surface with no more certificate or security warnings. NOTE: The Exchange team will have to configured OWA properly.
Once confirmed, repeat the same steps for the activesync URL that they provided.
When done, try using the OWA OR ActiveSync URL value in your settings of your Mail client.
Good Luck

Audio in video messages does not work

When I record a video message for someone, the audio does not work properly. It either doesn't work at all (silence is recorded), or cuts out after a 1-2 seconds. The problem seems to be confined to the MP4 video/audio encoder used by Skype for video messages.
My webcam (Logitech HD615) works properly when used for Skype calls (including the built in microphone), and when used in other applications. With other applications, I can also record videos and the audio is captured and encoded correctly. Although the problem does not seem to be the webcam, I have re-installled the webcam drivers and I have tried changing USB ports for the webcam.
I have re-installed the latest version of Skype and verified that Windows has the latest updates (I'm using Windows 7). I have tried re-booting a number of times when debugging this issue.
I have looked at the mp4 file that's created in the temp folder when Skype records the message - the audio is missing/broken regardless of what player I use. This, and the fact that the webcam works makes me believe that the problem is in the Skype use of the audio/video encoder, or the encoder itself.
Any ideas on how to solve this problem?
Thanks,
K.
Solved!
Go to Solution.

When you change the USB ports, make sure not to use USB 3.0 ports. I had a very similar issue with Logitech c920 webcam. Changing the port to USB 2.0 has solved the issue.
http://community.skype.com/t5/Windows-desktop-client/No-sound-on-video-messaging-playback/m-p/274382...

Encrypt Message does not work with new Plug-in 7.3

I installed the new Email Security Plug-in 7.3 but now the Encrypt Message button does not work. It is grayed out and unavailable when I attempt to create a new message.
I first tried installed 7.3 over the previous version but every time I opened Outlook I received an error message about XML not loading. I uninstalled the plugin, rebooted and installed it clean and that took care of the XML message. But I then found the encrypt button issue and have not been able to solve that issue. This is not isolated to my machine as I have tried installing it on another machine that never had the plug-in installed before.

My understanding is that they completely rewrote it, which is probably why an upgrade doesn't work well...
I did get one way of deploying figured out, the stuff on page 3-20 has some errors.
Here's what I did that works:
     Do a clean install on a machine that doesn't have any plugin installed.
     Copy the C:\Users\All Users\Cisco\Cisco IronPort Email Security Plug-In\Common directory and its contents to a network accsible share, say \\fs1\share\pluginconfig, so you now have \\fs1\share\pluginconfig\Common, etc...
     Copy your BCE_Config_Signed.xml file to the Common folder
     Rename that to config_1.xml
     Edit the CommonEncryptionConfig.xml to have the following XML:
      Now you can push the install with a command line that references the folder (the example on page 3-20 is wrong, no 's' ):
            CiscoIronPortEmailSecurity-7-3-0-102.exe /exenoui /qn UseCustomConfig="\\fs\share\pluginconfig"
       (if you're doing it on the same machine you did the clean install with, you should uninstall it first...)
Message was edited by: Ken Stieers

FaceTime and Messages does not work.

Hi, I have a Macbook pro 13" (early 2011) I have the latest OS X Yosemite 10.10 update and have tried every troubleshooting step I can think of. I have made sure my date and time are set automatically and are correct. I have toggled FaceTime on and off. It's logged in just fine and gives the appearance that it works but everytime I try to FaceTime it instantly says FaceTime failed. I can FaceTime the same person from my phone with no problems. Also my Messages is having the same issues they will not send although I'm signed in to my apple ID and verified with the code from my phone as soon as I opened the app. Also my Apple ID is valid and verified so there's no issue there. I cannot figure out why it will not work and I've done every troubleshooting step that apple offers on the website. I even downloaded and reinstalled the latest OS. Any suggestions? Thanks, Phil

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Exception handling with fault message type not working

Hi,
I have a sync proxy to proxy scenario and I have created a fault MT and specified in the outbound and Inbound service interface...
*In Inbound proxy I have the following code--*......
RAISE EXCEPTION TYPE z_cx_test_fault
EXPORTING
standard = l_standard_data.
In the sender side abap code which calls the outbound proxy I have the follwing code -
CATCH cx_ai_system_fault INTO lo_cx_ai_system_fault.
txt = lo_cx_ai_system_fault->get_text( ).
WRITE txt.
CATCH z_cx_test_fault INTO lo_cx_test_fault.
txt = lo_cx_standard_message_fault->get_text( ).
WRITE txt.
CATCH cx_ai_application_fault INTO lo_cx_ai_application_fault.
txt = lo_cx_ai_application_fault->get_text( ).
WRITE txt.
when i test the inbound proxy separately I get the custom fault message properly...
however when i run the proxy to proxy sync scenario and the custom exceptionz_cx_test_fault is raised inside the receiver proxy .......control goes to CATCH cx_ai_application_fault and not CATCH z_cx_test_fault .
I understand that cx_ai_application_fault is the super class of all the exception class but why does control go to its exception handling when a custom exception is raised...
Edited by: hema T on Feb 26, 2012 1:16 PM
Edited by: hema T on Feb 26, 2012 1:17 PM

Hi
I tried changing the sequence also but it did not work...
I can see an appropriate response coming from the receiver in SXMB_MONI of PI...this response has the "fault response "
"fault detail" data that I want.....however when the control goes to the sender why does it go to CATCH CX_AI_APPLICATION_FAULT and not not my CATCH z_cx_test_fault .
My observation - If I change the scenario to SOAP to Proxy sync..then the sender SOAP client gets the appropriate custom fault message back.
Edited by: hema T on Feb 27, 2012 1:17 PM
Edited by: hema T on Feb 27, 2012 1:17 PM

Message Listener Not Working

Similar Messages

Maybe you are looking for