Message-Mapping: Button Connect marked field and subsructures is disabled

Hi everybody,
I have a graphical mapping. And I want wo use the button "Connect marked field and subsructures".
But the button is disabled.
(Other buttons in this panel are also disabled)
Do you know any reasons?
Thanks
Regards Mario
Edited by: Mario Müller on May 19, 2009 7:22 AM

Hi,
in
XI mapping button disabled
They write I have to Use JAVA 1.4.2.
I downloaded 1.4.do I have to do next?
In the blog the write
"Go to your control panel->Java->java tab->view."
Which control panel is meant? How do I get there?
Thanks
Regards Mario

Similar Messages

Trying to download update to CoPilot Live and CoPilot GPS with maps. files sizes are large and taking hours to download on wireless connection. How can I download App updates and new maps while connected to PC and Itunes through hard wire internet link?

Trying to download update to CoPilot Live and CoPilot GPS with maps. Files sizes are large and taking hours to download on wireless connection. How can I download updates and new maps while connected to PC and Itunes through hard wire internet link?

I'm on my iPad, so I don't know if this is the page with an actual download. I don't see a button, but assume that is because I am on an iPad. It is in the DL section of Apple downloads.
http://support.apple.com/kb/DL1708

Upgrading to iso 5 and receiving error message "the network connection timed out" and won't complete the update. How do I fix to complete the upgrade?

Upgrading to iso 5 and received an error message "the network connection timed out" and fails to complete the upgrade. How do I complete the upgrade?

Try a manual install, as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

How do i restart my ipod touch if the power off button does not work and it is disabled and it say connect to Itunes

how do i restart my ipod touch if the power off button does not work and it is disabled and it say connect to Itunekyl

Place the iPod in recovery mode using this program. and then restore via iTunes.
RecBoot: Easy Way to Put iPhone into Recovery Mode

Message Mapping: button "map fields of same structure" is inactive

Hi!
Can some one please explain why the option within message mapping "map the same structure..." is inactive in my case?
Is that a bug?
I am on SAP NetWeaver 7.0 SP 14 .
Thank you!

Hi,
It is because your JAVA jdk version.
Install jdk 1.4.17.
Carlos

Use Message Mapping to repeat top node and split Message

I am currently using XSLT Messaging to do majority of the mapping. I have two issues that remain, I need to repeat the top node for each or its child elements and split the message.
<Sensor xmlns="namespace">
<Observation>
    <XML>Some Data</XML>
</Observation
</Sensor>
1. Can it be done in XSLT? I posted a thread asking for help on this. Where I would need to repeat the Sensor tag for each observation. If this is possible then I will able to split the messages at the HTTP adapter used for the target system.
2. Can Message Mapping be used. Using the same xsd on both source and target systems, Will sensor repeat if set to 1:n and observation set to 1:1. In source it is Sensor 1:1, Observation 1:n. If this works then I can use a BPM to shoot out individual messages using a for each.
Any help is greatly appreciated. I am fairly new to XI as this is my first major project. Thanks

Source File                                             Target File
> XI (XSLT) -
> Each observation as one file ---> Out via HTTP
Batch of all orders
Source File
<?xml version="1.0" encoding="ISO-8859-1"?>
<receipt>
<manufacturer>Manufacture Name</manufacturer>
<manufacturer_gln>999999</manufacturer_gln>
<transfer_recipt>0123456</transfer_recipt>
<prod>
    <product_GTIN>99999999999999</product_GTIN >
    <product_LOT>123456A</product_LOT >
    <production_date>20090131</production_date>
    <expire_date>20120131</expire_date>
    <carrier>
      <carrier_type>P</carrier_type>
      <carrier_barcode>001</carrier_barcode>
      <carrier_detail>
        <carrier>
          <carrier_type>C</carrier_type>
          <carrier_barcode>01</carrier_barcode>
          <carrier_detail>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089211</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089212</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089213</carrier_barcode></carrier>
            </carrier_detail>
        </carrier>
        <carrier>
          <carrier_type>C</carrier_type>
          <carrier_barcode>02</carrier_barcode>
          <carrier_detail>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089214</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089215</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089216</carrier_barcode></carrier>
            </carrier_detail>
        </carrier>
      </carrier_detail>
    </carrier>
    <carrier>
      <carrier_type>P</carrier_type>
      <carrier_barcode>002</carrier_barcode>
      <carrier_detail>
        <carrier>
          <carrier_type>C</carrier_type>
          <carrier_barcode>03</carrier_barcode>
          <carrier_detail>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089217</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089218</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089219</carrier_barcode></carrier>
          </carrier_detail>
        </carrier>
        <carrier>
          <carrier_type>C</carrier_type>
          <carrier_barcode>04</carrier_barcode>
          <carrier_detail>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089220</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089221</carrier_barcode></carrier>
           </carrier_detail>
        </carrier>
      </carrier_detail>
    </carrier>
</prod>
</receipt>
Target File
<?xml version="1.0" encoding="UTF-8"?>
<pmlcore:Sensor xmlns:pmlcore="urn:autoid:specification:interchange:PMLCore:xml:schema:1" xmlns:pmluid="urn:autoid:specification:universal:Identifier:xml:schema:1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:autoid:specification:interchange:PMLCore:xml:schema:1 cases.xsd">
<pmluid:ID>GPO_AI_LU_DC</pmluid:ID>
<pmlcore:Observation>
    <pmlcore:DateTime>2008-10-13T17:53:00.265+02:00</pmlcore:DateTime>
    <pmlcore:Command>PACK</pmlcore:Command>
    <pmlcore:Tag>
      <pmluid:ID>01</pmluid:ID>
      <pmlcore:Data>
        <pmlcore:XML>
          <Memory>
            <DataField fieldName="EXPIRATION_DATE">20120131</DataField>
            <DataField fieldName="BATCH_ID">123456A</DataField>
            <DataField fieldName="ZMFG_DATE">20090131</DataField>
            <DataField fieldName="ZMFG_GLN">999999</DataField>
            <DataField fieldName="ZMANUFACTURER">Manufacture Name</DataField>
            <DataField fieldName="ZITEM_COUNT">16</DataField>
            <DataField fieldName="ZWORK_ORDER_NUMBER">0123456</DataField>
          </Memory>
        </pmlcore:XML>
      </pmlcore:Data>
    </pmlcore:Tag>
    <pmlcore:Tag>
      <pmluid:ID>0108699547010089211</pmluid:ID>
      <pmlcore:Data>
        <pmlcore:XML>
          <Memory>
            <DataField fieldName="EXPIRATION_DATE">20120131</DataField>
            <DataField fieldName="BATCH_ID">123456A</DataField>
            <DataField fieldName="ZMFG_DATE">20090131</DataField>
            <DataField fieldName="ZMFG_GLN">999999</DataField>
            <DataField fieldName="ZMANUFACTURER">Manufacture Name</DataField>
            <DataField fieldName="ZWORK_ORDER_NUMBER">0123456</DataField>
          </Memory>
        </pmlcore:XML>
      </pmlcore:Data>
    </pmlcore:Tag>
     </pmlcore:Observation>
     </pmlcore:Sensor>
I have the XSLT Mapping working to transform data from Source file to target File. But my target file has multiple Observations that need to be split into the Sensor, Observation structure.

Message mapping not generating target fields

hi
iam doing jdbc--->rfc (bpm) created a one2one message mapping to import rfc table.
thanks in advance
sri

Hi Sri Rao,
Since you have created a one to one mapping, it would be required to map all the fields in your target message to ur source fields. In case there r some target fields which do not relate to your source field, map it onto a constant. This is all that is required to be done from what i understand from your query. In case there r further problems send the source n target data structure n i will be able to help you out better.
Cheers,
Christina

Multiple Message Mapping with same Idoc, Sender and Receiver

Hi,
We have one Interface sending INVOIC02 Idoc from SAP R3 4.6C to SAP R3 4.6C through XI 3.0.
On Inbound side we are using SAP standard configuring one Partner Profile with inbound INVOIC MM process code INVL.
In customizing, we have defined one invoic type for the EDI partner.
Now we have to integrate another type of inbound invoic, but in customizing it's not possible to assign more than one invoic type to the same Partner EDI.
So, we have a restriction in SAP 4.6C inbound standard. On the other hand, we can't desing two Integration Scenarios in XI 3.0 with the same idoc INVOIC02, for the same sender service and receiver service because Integration Directory doesn't allow to create two interface determination for them.
We are thinking on using header mapping in XI (receiver agreement to avoid use the same EDI partner profile for the inbound invoic, but we can't assign the same client and technical system with the same ALE Logical System in SLD for two different business systems.
Does anybody have any solution for this problem, SAP side or XI side?.
Thank you
Best regards
Luis

Hi!
In XI configuration - interface determination, you can specify more than one Inbound interface. If you identify more than one, you get a new column where you specify condition (xpath) for selecting between the different inbound interfaces.
In 4.6c, you can have more than one inbound invoic for the same EDI partner profile, if you separate between them using message function. Just add a new inbound parameter with a different message function, or copy the one you have and specify another message function, i,e. "DIFF".
Hope this helps.
Regards,
Oeystein

Message-Mapping: difference test in IR and runtime

Hi everybody,
I got a very strage behavior.
I got an element name CONTENT.
When I test my mapping in IR element CONTENT will be filled
During runtime the element CONTENT is NOT filled and the element is not generated!
For testing I use exactly the same payload as produced is runtime.
To make sure that there are not problems with cache, I manipulate other target field to see that the correct version is processed.
Any ideas?
Regards Mario

Hi,
for everybody:
I think I got the problem.
As I read dynamic attributes during runtime the behavior test <-> runtime was different.
Regards Mario

My itunes doesn't recognize my ipod touch because I've never connected it before and it is disabled, it won't let me restore it, it says to enter a passcode in order to connect and I can't because it is disabled

My ipod touch is disabled and it says to connect to itunes to restore. I have never added the ipod to my devices on my itunes so when I connect it says that itunes doesn't recognize the device. I then put it in recovery mode and connected it to itunes and I clicked restore and it says that itunes can't connect until I put in the passcode, but I can't put in a passcode because it is disabled!!! I don't know how to fix it and it is only a month old, should I take it back?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Yaskawa Drives connected to UMI7764 and PXI-7334 Disable after staying idle for about 5 minutes

I have a setup in which I am using PXI-7334 4-Axis controller with UMI-7764 to control 4 Yaskawa SGDV drives. The system has been running fine for about a year now. Recently we started seeing a strange behavior where with the drives enabled if they were left idle (No Motion) all of the 4 drives will disable automatically. Not sure what could be causing this problem. Can anyone help me figure out where the problem could be or what should I look out for.
Thanks
Jigar

Hi Jigar,
What is the version of NI-motion that you are using as well as your operating system you are using? Did anything change with your setup around the time this behavior started occurring?
Something that would also be interested in testing is whether or not this behavior occurs when you have only one of the drives hooked up. Let me know what you find.
Paul M
National Instruments | Applications Engineer | www.ni.com/support

I downloaded Itunes but when I click to open i get an error message "check network connection and try again". Windows 7 HP

I have successfully downloaded Itunes, however, when I click on the IStore an error message pops up "check network connection and try again". My network connection works perfectly and I have disabled all firewall and security programs. I've tried uninstall and reinstall several times and still get error message. Does anyone know how to get around this? THANKS!

Hi..
Open System Preferences > Security & Privacy > Firewall
Make sure the Firewall is turned off. You may need to click the gold lock icon to make changes.
Using FaceTime behind a firewall
Apple - Support - FaceTime

How to implement validations in message mapping?

Hi experts,
I have a simple requirement:
I have a simple synchronous scenario:
SOAP -> XI -> RFC
In a message mapping, one of the fields in the source message is of type String.
However, the target application (RFC) does not expect a non-numeric characters in this string.
My question is how can I perform the validation in XI and tell the sender that this field contains Non-numeric characters?
Please help.
Thanks.
Ron

> Ron,
>
> >>With a RunTime Exception thrown, how can I tell
> the sender an error has occured?
>
> Sure. You can do this with out a BPM. You need to
> configure alerts for this. If you configure ALERTS
> and SCOTT, this will send an email of the errors
> occuring in your scenario.
>
> For configuring and trouble shooting alerts check
> these
>
> https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/
> 2327
> https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/
> 2328
>
> Regards,
> Jai Shankar
Hi Jai
I already have alerts configured.
But what I had in mind is to send a response to the sender (The sender is waiting for a reply since this is synchronous), instead of telling the sender through an alternative means such as email, sms, etc.
Is this possible?

Message mapping response error

Hi..All,
i am doing RFC-SOAP scenario, in request message mapping i am giving the values at sender side executed, i am getting the fields at target side, in resonse message mapping giving the all fields at sender side,i executed , but in target side not getting any fields, pls suggest me.
****for helpful answers i will give points***********
thanks in advance,
Pasi

Hi
when you do the RFC to SOAP scenario then you have to craete the two message mapping
one mapping will be b/w both the request messages
and other mapping will be b/w the response messages.
in the interface mapping you select the request message mapping in the request tab and response message mapping in the response tab.
both the message interfaces outbound as well as inbound interface of the synchronous type.
if u still face the problem please reply me back
Thanks
Rinku

Hierarchical structure message mapping in PI

Hello All,
I have a source and target structure in graphical message mapping
<?xml version="1.0" encoding="UTF-8"?>
<Material_MT>
   <row>    0..unbounded
      <MATERIAL_ID>1234</MATERIAL_ID>
      <DEL_FLAG>
     </row>
<row>    0..unbounded
      <MATERIAL_ID>1234</MATERIAL_ID>
      <DEL_FLAG>Y</DEL_FLAG>
     </row>
<row>
      <MATERIAL_ID>4567</MATERIAL_ID>
      <DEL_FLAG>N</DEL_FLAG>
     </row>
<row>
      <MATERIAL_ID>1234</MATERIAL_ID>
      <DEL_FLAG>N</DEL_FLAG>
     </row>
</Material_MT
Materials can repeat in the source structure but their flags could be different
Target structure
<Mat> 1..1
<Mat_update> 0..unbounded
   <Matid>
           <Matreg>
                 <Matcomplete/>
                 <tuple>
                      <id/>
                  </tuple>
           </Matreg>
     </Matid>
     <recordind>
            <id>
      </recordind>
</Mat_update>
Now, the requirement is
1) For each <MATERIAL_ID> in the source, map its corresponding flag <DEL_FLAG> value <Matcomplete/ field in the target ,
2) For each <MATERIAL_ID> in the source, take its corresponding value and make a soap lookup call in mdm to get tuple ids (mutiple value per material possible) and map each to <id> (under <tuple>)
3) For each <MATERIAL_ID> in the source, take its corresponding value and make a soap lookup call in mdm to get <recordind> (single value per material) and map to <id> under <recordind>
Now, I have done soap lookup for 2) and getting multiple tupleIDs for a single material
For 3) also, I am doing a lookup and getting a single ID back
Both 2)   and 3) are achieved using udf soap lookup - 2) will return a resultlist and 3 a single string value
My main question is how to do message mapping for achieving step1, 2 and 3. Pls help...its needed badly
Thanks
mike

Hi Mike,
Below is the logic as per my understanding.
1- Direct mapping from DEL_FLAG> value <Matcomplete/ field in the target
2- After lookup Map multiple Tuple Id's to Tuble node.
3-After lookup Map recordind to Id .
If you want it in detail let me know the sample output structure with values.
Regards,
Sudha

Message-Mapping: Button Connect marked field and subsructures is disabled

Similar Messages

Maybe you are looking for