Message Mapping Error in BPM

when message mapping, if the length of source field is longer than specified length, I need to output these kinds of messages. what is the solution?

Hi,
        try using a user defined function written in java where u can check for the condition and raise a exception.
           if(sourcefield.length()>16)
S.O.P("The Invoice Number is greater than 16 characters");
or
   using a BPM where u can check whether Invoice number is greater than 16 characters and if it is true then raise an exception and send the message through BPM.
regards
jithesh

Similar Messages

Message Mapping Error in Text File to XML file Scenario

Hi Gurus,
This is Sudheer...I am New to SAP-PI......
Below link is File to File Scenario(Text File to XML File)...
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/basicFileAdapterContentConversion
I am facing Message Mapping Error....I am not able to map the fileds...
Please help me.
-Sudheer

Thanks Shabarish & Manisha for your reply....
Ya I am getting error while I am testing in IR....
I dont know how to map the fields that shown given below...
       Message Type         ---         Message Type
             Record                              Employee
                 Header                                 EmployeeID
                     Key                              Name
                     EmpID                          Company
                     Name                            Phone
                     Company                       Prior_Employer
                     Phone                               Company
                  Detail                                   Location
                      Key
                      Company
                      Location

Mapping Errors in BPM

Hi All,
How can the mapping errors in BPM be handeld implicitly (without the use of Exception Handling Branch)
Regards,
Anurag

Hi Anurag.
Handling the mapping exceptions in BPM could be possible using the Alerts.
Go through this blog for Alert Configuration:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
And also go through this thread:
alert in BPM
Hope this helps you.
Regards,
Hari.

1: N multi mapping -----Message Mapping Error

Hi,
I am doing this scenario
Various multi-mappings and Optimizing their Implementation in Integration Processes (BPM) in XI.
In the design part of the mapping.
How can I perform the message mapping
Step 1. We are controlling occurrence of Output Piyush_msg_out_3 by mapping it with element2 with message context.
Step 2.
We are using u201CUseOneAsManyu201D under category node functions (SP14). It has three inputs ;
   1. Element which is going to be used for multiple times. In our case it is Element1 with message context.
   2. The element which is going to define how many times it will be replicated. Important thing, context should be same.
   3. Same as second input but with its own context in our case it is Element2.
For Step 1,
I have mapped piyush_msg_out_3 with Element2 (context is root)
For Step 2,
I have mapped
Element1(context root)----
|
Element2(context root)----
|   useOneAsMany -
>Element1
Element2(context root)----
|
subelement------> subelement
I did not do root mapping.
when do the test I am getting the following error
Start of test
Compilation of MM_multimappingandoptimizing successful Cannot produce target element
/ns0:Messages/ns0:Message1/ns1:piyush_msg_out_3[2]/root/Element1. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd Cannot produce target element
/ns0:Messages/ns0:Message1/ns1:piyush_msg_out_3[2]/root/Element1. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
End of test
I thought error generated due to Parent Node condition fails, How do I map the Top node,
even though I mapped root------->root, I am getting the same error in the instance test
Please give me some suggestions
my message mapping is correct or do I need to change the context of the node or what should I have to do ?
thanks
manian

Hi Praveen,
I have checked the XSD tab of Source and Target message types. I can see the complete XSD.
Source Message Type XSD:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn:mlr:multimappingandoptimizing" targetNamespace="urn:mlr:multimappingandoptimizing">
     <xsd:element name="piyush_msg_in_1" type="piyush_msg_in_1" />
     <xsd:complexType name="piyush_msg_in_1">
          <xsd:annotation>
               <xsd:appinfo source="http://sap.com/xi/TextID">
               f1fd03a0cddd11ddc1c4001cc01cef0d
               </xsd:appinfo>
          </xsd:annotation>
          <xsd:sequence>
               <xsd:element name="root">
                    <xsd:annotation>
                         <xsd:appinfo source="http://sap.com/xi/TextID">
                         99ffb9e0cd1a11ddc6b0001cc01cef0d
                         </xsd:appinfo>
                    </xsd:annotation>
                    <xsd:complexType>
                         <xsd:sequence>
                              <xsd:element name="Element1" type="xsd:string">
                                   <xsd:annotation>
                                        <xsd:appinfo source="http://sap.com/xi/TextID">
                                        99ffb9e1cd1a11dd8843001cc01cef0d
                                        </xsd:appinfo>
                                   </xsd:annotation>
                              </xsd:element>
                              <xsd:element name="Element2" maxOccurs="unbounded">
                                   <xsd:annotation>
                                        <xsd:appinfo source="http://sap.com/xi/TextID">
                                        99ffb9e2cd1a11dd8f7a001cc01cef0d
                                        </xsd:appinfo>
                                   </xsd:annotation>
                                   <xsd:complexType>
                                        <xsd:sequence>
                                             <xsd:element name="subelement" type="xsd:string">
                                                  <xsd:annotation>
                                                       <xsd:appinfo source="http://sap.com/xi/TextID">
                                                       99ffb9e3cd1a11dd8ff2001cc01cef0d
                                                       </xsd:appinfo>
                                                  </xsd:annotation>
                                             </xsd:element>
                                        </xsd:sequence>
                                   </xsd:complexType>
                              </xsd:element>
                         </xsd:sequence>
                    </xsd:complexType>
               </xsd:element>
          </xsd:sequence>
     </xsd:complexType>
</xsd:schema>
Target Message Type XSD:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn:mlr:multimappingandoptimizing" targetNamespace="urn:mlr:multimappingandoptimizing">
     <xsd:element name="piyush_msg_out_3" type="piyush_msg_out_3" />
     <xsd:complexType name="piyush_msg_out_3">
          <xsd:annotation>
               <xsd:appinfo source="http://sap.com/xi/TextID">
               058e2b60cdde11ddaffd001cc01cef0d
               </xsd:appinfo>
          </xsd:annotation>
          <xsd:sequence>
               <xsd:element name="root">
                    <xsd:annotation>
                         <xsd:appinfo source="http://sap.com/xi/TextID">
                         7fb0d7d0cd1b11dd99ae001cc01cef0d
                         </xsd:appinfo>
                    </xsd:annotation>
                    <xsd:complexType>
                         <xsd:sequence>
                              <xsd:element name="Element1" type="xsd:string">
                                   <xsd:annotation>
                                        <xsd:appinfo source="http://sap.com/xi/TextID">
                                        7fb0d7d1cd1b11ddc07e001cc01cef0d
                                        </xsd:appinfo>
                                   </xsd:annotation>
                              </xsd:element>
                              <xsd:element name="Element2">
                                   <xsd:annotation>
                                        <xsd:appinfo source="http://sap.com/xi/TextID">
                                        7fb0d7d2cd1b11dd9385001cc01cef0d
                                        </xsd:appinfo>
                                   </xsd:annotation>
                                   <xsd:complexType>
                                        <xsd:sequence>
                                             <xsd:element name="subelement" type="xsd:string">
                                                  <xsd:annotation>
                                                       <xsd:appinfo source="http://sap.com/xi/TextID">
                                                       7fb0d7d3cd1b11dda9d7001cc01cef0d
                                                       </xsd:appinfo>
                                                  </xsd:annotation>
                                             </xsd:element>
                                        </xsd:sequence>
                                   </xsd:complexType>
                              </xsd:element>
                         </xsd:sequence>
                    </xsd:complexType>
               </xsd:element>
          </xsd:sequence>
     </xsd:complexType>
</xsd:schema>
thanks
manian

Mapping Error during BPM

Hi Gurus,
Im configuring a scenario to perform idoc collections using BPM.
When im testing the scenario, the SXMB_MONI transaction is telling me that there is a mapping error. I went thru the messages in SXMB_MONI but im unable to find out where the is the mapping error. In addition, I tried to test the scenario by sending 2 idocs and but its seems that the BPM is not triggered. It seems like somehow the erroneous BPM is stuck and im unable to trigger it anymore. I created a new BPM and tested it, it got triggered but is still giving me the mapping error.
Any advice?
Thanks in advance.

Hi,
I referred to the below blog but i do not have the option for Create New Transformation under the Transformation step.
Transactional Behavior in BPM.
But i managed to get some information on the mapping error
Cannot produce target element /ns0:Messages/ns0:Message1/PEXR2001/IDOC.
Im trying to collect all the PEXR2001 idocs, i.e. im going a N to 1 mapping. I've mapped the PERX2001 element of the source to element IDOC of the target. Is this correct? I've change the source from 0 to Unbounded.
In addition, now in SXMB_MONI, after i click on PE, im getting the following message
Message DD8878FE218C60F1948400170853600D held at process 000000002001 but not yet processed.
Is there any tcode i can goto to trigger this process?
Thanks!!!

Message Mapping error in UDF

I am receiving errors when trying to activate my MM. I believe the issues are in one of two UDF's. These UDF's do work in another MM without error. Below are the error's and UDF's.
ERRORS:
Activation of the change list canceled Check result for Message Mapping MM_WPDBBY_WPDBBY01_TO_POS_WAWAFILE | http://wawa.com/xi/erp/pos: Starting compilation Source code has syntax error: /usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map5420e070cabe11dcab4b00306ef38da9/source/com/sap/xi/tf/_MM_WPDBBY_WPDBBY01_TO_POS_WAWAFILE_.java:3291: cannot resolve symbol symbol : variable container location: class com.sap.xi.tf._MM_WPDBBY_WPDBBY01_TO_POS_WAWAFILE_ map = container.getTransformationParameters(); ^ /usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map5420e070cabe11dcab4b00306ef38da9/source/com/sap/xi/tf/_MM_WPDBBY_WPDBBY01_TO_POS_WAWAFILE_.java:3293: cannot return a value from method whose result type is void return constant; ^ 2 errors
UDF's:
public String getSender(Container container){
String constant;
java.util.Map map;
// get constant map
map = container.getTransformationParameters();
constant = (String) map.get (StreamTransformationConstants.SENDER_SERVICE);
return constant;
IMPORTS: com.sap.xi.mapping.parse.dom.;javax.xml.parsers.;java.io.;com.sap.aii.mapping.lookup.;org.w3c.dom.*;
public String getSeqNum(String fileType,String objNum,String Sender,Container container){
String request = "<ns0:ZRFC_NUMBER_GET_NEXT xmlns:ns0=\"urn:sap-com:document:sap:rfc:functions\"><NR_RANGE_NR>" + fileType + "</NR_RANGE_NR><OBJECT>" + objNum + "</OBJECT><QUANTITY/></ns0:ZRFC_NUMBER_GET_NEXT>";
InputStream isRequest = new ByteArrayInputStream(request.getBytes());
SystemAccessor accessor = null;
String num = null;
try{
     // 1. Determine a channel.
     Channel channel = LookupService.getChannel(Sender, "R_RFC_ERP");
     // 2. Get a system accessor for the channel.
     accessor = LookupService.getSystemAccessor(channel);
     // 3. Create a payload according to the data type which the adapter expects.
     //    Use service.getBinaryPayload() for binary payload,
     //    and service.getTextPayload() for text payloads.
     Payload payload = LookupService.getXmlPayload(isRequest);
     // 4. Execute lookup.
     Payload response = accessor.call(payload);
     //Parse response
     DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
     DocumentBuilder builder = factory.newDocumentBuilder();
     InputStream resStream = response.getContent();
     Document doc = builder.parse(resStream);
     Element sequence = doc.getDocumentElement();
     NodeList number = sequence.getElementsByTagName("NUMBER");
     //Extract Number
     num = DOMUtil.getSimpleElementText((Element) number.item(0));
} catch (Exception e) {
     return e.getMessage();
} finally {
     try {
          if (accessor != null) accessor.close();
     } catch (Exception e) {
          return e.getMessage();
GlobalContainer gc = container.getGlobalContainer();
gc.setParameter("Num", num);
return num;
Any help is appreciated.
Regards,
Darrell

Fauver,
Just to narrow down the problem first remove the first udf and only use the 2nd user defined function. Also in the 2nd udf you have to change this line:
try{
// 1. Determine a channel.
Channel channel = LookupService.getChannel(Sender, "R_RFC_ERP");
In the above line instead of Sender you use the business service or business system where R_RFC_ERP RFC communication channel is created in Integration Directory. So you are hardcoding it first.
Once you have done this changes do save and test it once again. If this works then you can change back to original and your first udf needs to be checked.
Regards,
---Satish

While Activating Message mapping, error.

Hi
While activating my message mapping i am getting this error "JMS server failed"
How to resolve this and whats the cause of it?
Please do not post links.
Thanks in advance
Saiyog
Points will be awarded
Edited by: Saiyog Gonsalves on Jun 13, 2008 6:09 PM

Hi,
There seems to be problem with J2EE Server. Please follow the following steps and it will resolve your error.
login to J2EE Visual aadmin ->cluster ->services ->.JMS connector ->runtime(Right side tab) ->check the factories / destinations (if anything is in red color X mark).
Fix it and restart the server.
Pls reward points if answer is useful
Thanks
Amit

Message Mapping error: RuntimeException in Message-Mapping transformation

Hi,
Being new to XI, I am struglling to sort out a basic mapping error. Appreciate if you could help out.
Its an File->XI->R/3 scenario.
My FCC successfully reads the File and creates an XML. However this XML is not transferred to the target XML structure which is exactly same except the root element name is different at top.
I tried various forum tips but I still am getting the error.
( When I Test the Message mapping in test mode..it seems fine, however if I copy the XML from SXMB_MONI, it then throws the above error)
I looked at the MM in text mode: below is the extract
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER=
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER/SOURCE=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER/SOURCE=
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER/DESTINATION=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER/DESTINATION=
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER/MESSAGE_ID=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER/MESSAGE_ID=
As seen the name space in both starts with nS0 and end of each line has '=' sign. Is that ok.
I have run out of options and dont know , whats the problem. Please help.
The target and Source XML structures are exactly same as shown below
MT_REQUEST                                 MT_REQUEST_TO_SAP
   |__MSG_HEADER                            |__MSG_HEADER
     |__SOURCE                                |__SOURCE
     |__DESTINATION                           |__DESTINATION
     |__MESSAGE_ID                            |__MESSAGE_ID
And the SXMB_MONI Trace shows the following error
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation:
Cannot produce target element /ns0:MT_REQUEST_TO_SAP.
Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at ..
Thanks
Shirin
Edited by: Shirin K on May 29, 2008 10:29 AM

Hi Prakasu,
As structure are exactly same, I have done 1:1 mapping. So all the fields in target structure are mapped, so no field has beeen left.
In this structure, I do not have any 1:n relation. So 1:1 mapping should be fine.
Apart from this could teher be any other reason.
Regards
Rajiv

Message Mapping Error - Runtime

Hi,
I am able to execute message mapping in graphical mapping editor succesfully. But when i include mapping in interface determination throws as error.. In sxmb_moni as shown below
i<SAP:Error xmlns:SAP=throws as error.. In sxmb_moni as shown below"http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_DEMO1_</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
<SAP:P3>on: Cannot create target element /ns0:MT_Demo. Val</SAP:P3>
<SAP:P4>ues missing in queue context. Target XSD requires~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_DEMO1_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns0:MT_Demo. Values missing in queue context. Target XSD requires~</SAP:Stackt
Please share your thoughts..

Hi Guys,
I have done a one to one mapping, it runs fine in the editor but fails at run time.
I took the payload from moni put it in messagemapping test tab, it shows red...
I compared the payload with the payload i get after successfulll message mapping...it is the same..
yet i get red signal...
im on PI 7.1..have ne of u faced ne thign similiar?

Message mapping when using BPM?

We are doing a test to see if you can do a split of a string using standard functions, UDF or BPM.
We discovered that standard function has some of the functionality but if you are going to solve the problem that way the solution will be very complex. You will get no flexi bility in how to design the string and all the feilds will have to have fix length. So Standard functions are not the solution for us.
UDF works realy great. Write your java function and map it and everything are running.
We wont to test BPM as well. and i just started to look at it and how to solve it. I'm a newbee on BPM and for start I'm wondering how the message mapping should look to use in the BPM?
Sourcemessage looks as follow:
<Header>
   <Line>
      <SegmentA>   0 to unbounded
      <SegmentB>   0 to unbounded
      <SegmentC>   0 to unbounded
SegmentA contains a value to be copied to a segment in the target.
SegmentB contains a date to be copied to a targetelement.
SegmentC contains a string that we want to split into several elements in the target structure.
Targetmessage looks as follow:
<Header>
   <LineA>   1 to 1   (Will get the value from SegmentA in the sourcemessage.)
   <LineB>   1 to 1   (Will get the value from SegmentB in the sourcemessage.)
   <LineC>   0 to unbounded
      <ElementA>   0 to 1   (Will get a part of the string from SegmentC in the sourcemessage.)
      <ElementB>   0 to 1   (Will get a part of the string from SegmentC in the sourcemessage.)
      <ElementC>   0 to 1   (Will get a part of the string from SegmentC in the sourcemessage.)
To able to get the messages into BPM I need a interfacemapping and to do the interfacemapping I need to do a messagemapping. How should that messagemapping be configured?

> Now i want to try to replace that UDF with a BPM (Integration Process).
An UDF is part of a mapping and an Integration Process is used if you want to realize a more complex scenario then sending a message from System A to System B. In BPM you can do things like collecting messages, use timeouts, ...
But if you want to use a mapping in a BPM you define your mapping in your Integration Repository (like in a standard scenario without BPM) and then you can use the mapping in the Integration Process.
That's why i say it's maybe possible to realize your mapping without UDF (for example only with standard functions), but it makes no difference if you use BPM.
If you want to try finding a solution without UDF, i would suggest to open a new thread for this question.
Hope this helps.
Regards
Patrick

Retrive message mapping error from java class

Hi,
I'm trying to create a scenario that if exist an error in the message mapping step this error will be inserted in a Ztable. I'm thinking in to call to the message mapping from a java class to catch the exception and this java class will be used in the interface mapping.
Is it possible? If yes, How to call the message mapping from java code?
Exists other possible solution?
I need to do it because we want store all mapping errors in a Ztable. (Customer requeriment)
Thanks, in advance
Jose Manuel

you can throw generic exceptions from the message mapping like this - /people/michal.krawczyk2/blog/2007/04/26/xipi-throwing-generic-exceptions-from-any-type-of-mapping
you can then decide how to handle these exceptions

Message Mapping errors in Integration Builders

Hi
Our Developer   trying to make changes to a message mapping in Integration Builder and when we try to compile the mapping to test it I'm getting the following error:
11:34:42 Start of test
Compilation process error : CreateProcess: javac @G:/usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapccbaf1a0532211ddcdd4001b7835a092/O1216204482525.txt @G:/usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapccbaf1a0532211ddcdd4001b7835a092/S1216204482540.txt error=2
11:34:43 End of test
Any ideas?
Regards
Chandu

Hi
I checked for read, write and modify permissions for that folder and SAPSERVICExxx user has full writes to that folder.
The error we are getting is :
#6 11:15:57 [AWT-EventQueue-0] ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.ib.server.cmpl.CompilerException
com.sap.aii.ib.core.mapping.exec.ExecuteException: Compilation process error : CreateProcess: javac @G:/usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map555c4a6053e911ddb1d1001b7835a092/O1216289752214.txt @G:/usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map555c4a6053e911ddb1d1001b7835a092/S1216289752246.txt error=2
     at com.sap.aii.ib.server.mapping.exec.ServiceUtil.compileSourceCode(ServiceUtil.java:207)
     at com.sap.aii.ib.server.mapping.exec.ServiceUtil.compile(ServiceUtil.java:156)
     at com.sap.aii.ibrep.server.mapping.ServerMapService.compileSourceCode(ServerMapService.java:361)
     at com.sap.aii.ibrep.server.mapping.ServerMapService.compileSourceCodeWithoutAndWithArchives(ServerMapService.java:301)
     at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:153)
     at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.execute(MapServiceBean.java:52)
     at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.execute(MapServiceRemoteObjectImpl0.java:259)
     at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0p4_Skel.dispatch(MapServiceRemoteObjectImpl0p4_Skel.java:146)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Serialized server exceptions:
Regards
Chandu

Message Mapping Error : "already dropped from buffer"

Hi,
today we have a new strange error in a simple message mapping File2IDoc thats results in SYSFAIL.
Maybe a buffer or memory error?
In short:
+/ARTMAS05/IDOC/E1BPE1MARART[2]/DELN_DATE(suppressed field); root message: Index 2147483647 is already dropped from buffer. Cur offset is 2147483636+
In detail:
#2.#2010 08 18 10:49:51:619#+0200#Error#/Applications/ExchangeInfrastructure#
#BC-XI#com.sap.xi.util.misc#0026557C6A4004B6000000000000120D#229073650000000872#sap.com/com.sap.xi.services#com.sap.aii.ib.server.mapping.execution.JavaMapping#J2EE_GUEST#0#SAP J2EE Engine JTA Transaction : #0A1BAF81AA0111DF82D40026557C6A40#0a1baf81aa0111df82d40026557c6a40#0a1baf81aa0111df82d40026557c6a40#0#output#Java##
RuntimeException during appliction Java mapping com/sap/xi/tf/_xxxxx_Out_To_ARTMAS_ARTMAS05_A1_
Thrown:
com.sap.aii.mappingtool.tf7.MessageMappingException: Runtime exception when processing target-field mapping /ARTMAS05/IDOC/E1BPE1MARART[2]/DELN_DATE(suppressed field); root message: Index 2147483647 is already dropped from buffer. Cur offset is 2147483636
#2.#2010 08 18 10:52:45:149#+0200#Error#/Applications/ExchangeInfrastructure#
#BC-XI#com.sap.xi.util.misc#0026557C6A4004BA000000000000120D#229073650000000872#sap.com/com.sap.xi.services#com.sap.aii.ib.server.mapping.execution.JavaMapping#J2EE_GUEST#0#SAP J2EE Engine JTA Transaction : #0A1BAF81AA0111DF82D40026557C6A40#0a1baf81aa0111df82d40026557c6a40#0a1baf81aa0111df82d40026557c6a40#0#output#Java##
RuntimeException during appliction Java mapping com/sap/xi/tf/_xxxxx_Out_To_ARTMAS_ARTMAS05_A1_
Thrown:
com.sap.aii.mappingtool.tf7.MessageMappingException: Runtime exception when processing target-field mapping /ARTMAS05/IDOC/E1BPE1MARART[2]/DELN_DATE(suppressed field); root message: Index 2147483647 is already dropped from buffer. Cur offset is 2147483636
Thanks in advance,
André

Hi André, did you try to re-create de Message Mapping with the same source/target structures?
Regards,
Juan.

Request Message Mapping - error

Hello,
Scenario :
Flat file => File adapter => XI 2.0 => IDoc => SAP
The adapter picks up the file, sends it to Integration Engine. In the Monitoring tool, the following are fine : Inbound Message, Receiver determination, Interface determination, Technical routing, Receiver grouping, Message split.
We are getting error in Request Message Mapping. The error is below :
===========
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<SAP:Context />
<SAP:Code p1="Error during mapping" p2="--- Creating Java mapping com.sap.xi.tf._zMsgMap_ --- Using MappingResolver with context URL /sapmnt/XID/global/xi/mapping/http%3A%2F%2FABCxyz%2Ecom%2Fxi%2FTest%2F/bc52cef0be3411d8b277cade640701c6/ --- Loaded class com.sap.xi.tf._zMsgMap_ --- com.sap.aii.util.misc.api.BaseRuntimeException: Fatal Error: com.inqmy.lib.xml.parser.ParserException: XMLParser: No data allowed here:BLO (:main:, row:1, col:3) at com.sap.aii.mappingtool.tf.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf.AMappingProgram.execute(AMappingProgram.java:100) at com.sap.aii.ibrun.server.map.RUMappingJava.execute(RUMappingJava.java:47) at com.sap.aii.ibrun.server.map.RURunner.run(RURunner.java:58) at com.sap.aii.ibrun.server.map.RUManager.run(RUManager.java:66) at com.sap.aii.ibrun.sbeans.map.MappingRequestHandler.handleRequest(MappingRequestHandler.java:62) at com.sap.aii.ibrun.sbeans.map.MappingServiceImpl.processFunction(MappingServiceImpl.java:72) at com.sap.aii.ibrun.sbeans.map.XMappingServiceObjectImpl0.processFunction(XMappingServiceObjectImpl0.java:24) at com.sap.aii.ibrun.sbeans.map.MappingServiceKey.processFunction(MappingServiceKey.java:10) at java.lang.reflect.Method.invoke(Native Method) at com.inqmy.services.rfcengine.RFCDefaultRequestHandler.invokeBean(RFCDefaultRequestHandler.java:73) at com.inqmy.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:47) at com.inqmy.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:69) at com.sap.mw.jco.JCO$Server.dispatchRequest(Unknown Source) at com.sap.mw.jco.rfc.MiddlewareRFC$Server.nativeListen(Native Method) at com.sap.mw.jco.rfc.MiddlewareRFC$Server.listen(Unknown Source) at com.sap.mw.jco.JCO$Server.listen(Unknown Source) at com.sap.mw.jco.JCO$Server.run(Unknown Source) at java.lang.Thread.run(Thread.java:479) --- An error occured during the execution of the Java mapping com.sap.xi.tf._zMsgMap_ . Fatal Error: com.inqmy.lib.xml.parser.ParserException: XMLParser: No data allowed here:BLO (:main:, row:1, col:3) ---" p3="" p4="">MAPPING.GENERIC</SAP:Code>
<SAP:Text language="EN">Error during mapping</SAP:Text>
</SAP:ErrorHeader>
===========
For same scenario, another interface, we get the below error :
===========
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<SAP:Context />
<SAP:Code p1="Error during mapping" p2="--- Creating Java mapping com.sap.xi.tf._xMsg_mapping_ --- Using MappingResolver with context URL /sapmnt/XID/global/xi/mapping/http%3A%2F%2FABCxyz%2Ecom%2Fxi%2FTest%2F/bc52cef0be3411d8b277cade640701c6/ --- Load of com/sap/xi/tf/_xMsg_mapping_.class from /sapmnt/XID/global/xi/mapping/http%3A%2F%2FOwensCorning%2Ecom%2Fxi%2Ftest%2F/bc52cef0be3411d8b277cade640701c6 failed. --- Class not found: com.sap.xi.tf._xMsg_mapping_ --- java.lang.ClassNotFoundException at RUMappingJava.load(): Could not load class: com.sap.xi.tf._xMsg_mapping_ Class not found: com.sap.xi.tf._xMsg_mapping_ --- com.sap.aii.ibrun.server.map.MappingRuntimeException: at com.sap.aii.ibrun.server.map.MappingRuntimeException.code_STYLESHEET_OR_CLASS_NOT_FOUND(MappingRuntimeException.java:91) at com.sap.aii.ibrun.server.map.RUMappingJava.load(RUMappingJava.java:119) at com.sap.aii.ibrun.server.map.RUMappingJava.execute(RUMappingJava.java:40) at com.sap.aii.ibrun.server.map.RURunner.run(RURunner.java:58) at com.sap.aii.ibrun.server.map.RUManager.run(RUManager.java:66) at com.sap.aii.ibrun.sbeans.map.MappingRequestHandler.handleRequest(MappingRequestHandler.java:62) at com.sap.aii.ibrun.sbeans.map.MappingServiceImpl.processFunction(MappingServiceImpl.java:72) at com.sap.aii.ibrun.sbeans.map.XMappingServiceObjectImpl0.processFunction(XMappingServiceObjectImpl0.java:24) at com.sap.aii.ibrun.sbeans.map.MappingServiceKey.processFunction(MappingServiceKey.java:10) at java.lang.reflect.Method.invoke(Native Method) at com.inqmy.services.rfcengine.RFCDefaultRequestHandler.invokeBean(RFCDefaultRequestHandler.java:73) at com.inqmy.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:47) at com.inqmy.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:69) at com.sap.mw.jco.JCO$Server.dispatchRequest(Unknown Source) at com.sap.mw.jco.rfc.MiddlewareRFC$Server.nativeListen(Native Method) at com.sap.mw.jco.rfc.MiddlewareRFC$Server.listen(Unknown Source) at com.sap.mw.jco.JCO$Server.listen(Unknown Source) at com.sap.mw.jco.JCO$Server.run(Unknown Source) at java.lang.Thread.run(Thread.java:479) ---" p3="" p4="">MAPPING.GENERIC</SAP:Code>
<SAP:Text language="EN">Error during mapping</SAP:Text>
</SAP:ErrorHeader>
===========
Any help in resolving these issues is greatly appreciated.
Thanx,
Homiar.

Hallo Homiar,
to the first problem:
Do you get the same error, if you test the mapping in the Integration Builder:Design? I mean, you can download the XML instance which is entered into the Message
Mapping zMsgMap in the Integration Engine Monitor (R/3 Transaction SXMB_MONI) and use this XML in the test environment of the Message Mapping in the Integration Builder:Design.
to the second problem:
It looks like that the Message Mapping xMsg_mapping could not be found by the Integration Engine. You can try to reactivate the Message Mapping in the Integration Builder. This is done for example by changing the description of the corresponding Message Mapping object and saving and activating the object.
Regards Franz

Run Time Message Mapping error

Hello Experts,
I am working on JDBC to IDOC scenario. I am getting mapping error at SXMB_MONI and the error message is as below:
com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ZABCD01. Values missing in queue context. Target XSD requires a value for this element, but the target-field mapping does not create one. Check whether the XML instance is valid for the source XSD, and whether the target-field mapping fulfils the requirement of the target XSD at and so on.....
I tested in Message Mapping by entering the values and I am able to see the target structure with out any Mapping errors..
But when JDBC real time it got Runtime mapping error as above:
Source
tablename.Set -
1.1
row--
0.Unbound
a----
0.1
b----
0.1
Target
ZABCD01-----1.1
IDOC--
1.1
-Begin-----Required
XYZ--
0.1
a----
0.1
b----
0.1
Dont know where is the problem is: I tried with payload its giving the same error as runtime....
Payload looks as :
<?xml version="1.0" encoding="utf-8" ?>
- <set>
- <row>
<a>value</a>
<b>value</b>
</row>
</set>
Can any one faced same issue?
Thanks
Rajeev

HI Satish,
I created a new Datatype and tested wtih payload still the same..I am unable to create target node as IDOC segment is 0..unbound and below all fields are not not creating stilll they are mapped to source fileds.. what would be the reason?
IDOC structure is:
ZIDOC........................1....1
...IDOC........................1....1
.....BEGIN.....................Requied (I disabled this filed)
.....SEGMENT1.............1....1
.....SEGMENT2..............0...1
.........SUBSEGMENT1...0...99
..............FIELD1.............0....1
..............FIELD2..............0...1
..............FIELD3..............0...1
..........SUBSEGMENT2....0...1
..............FIELD4..............0...1
..............FIELD5..............0...1
JDBC strucute is
MT_XYZ
....set.................1...1
.....row...............0...unbound
......field1............0...1
......field2............0...1
......field3............0...1
......field4............0...1
I am not mapping all fields to respective fileds of source to target ...if I dont map ZIDOC and IDOC then mapping executing successful but I am not getting SUBSEGMENT1 and SUBSEGMENT2 with there fields values..
If I do test by entering values manually it populate all fields values with subsegments but when i copy the payload from SXMB_MONI then I am getting error and If I remove target node mappings I am unable to get subsegment and fileds populated..
How can I make FIELDS of IDOC to get populated??
Thanks
Rajeev
Edited by: rajeev raj on Aug 25, 2009 9:26 PM

Message Mapping Error in BPM

Similar Messages

Maybe you are looking for