Message Mapping .. Some Icons under Design Tab grayed out

Even in Edit Mode these Icons are grayed out. How Can I fix this problem?. Someone in another thread suggested Java Webstart version 1.4.2_06 thru 1.4.2_09 fixes this problem. I downloaded 1.4.2_09 and installed but didn't help. Anyone has similar problem ?

Hi ST,
Go to Control Panel ->chhose Java->choose Java Tab-> under this you will see Java application run time settings ->click on view button and check that
1 .your java run time version is working .
2. more over what are the java version available there and only on eshould be used for this purpose.
Kindly let me know is this problem is only with the components under particular Software component version or it is with whole IR.
regards,

Similar Messages

On a new mail message in Yosemite there is no Send button or icon. Only a grayed out word that says "send. I can receive mail but not send because nothing at top of email allows sending

On a new mail message in Yosemite there is no Send button or icon. Only a grayed out word that says "send. I can receive mail but not send because nothing at top of email allows sending. Please help. This is true of two .me accounts I have.

Hi,
It may pay to send a Screen Shot of the Connection Doctor info. (see the Window Menu)
It would seem the IMAP or POP side is logged in bit the out going STMP server is not.
8:27 pm Monday; December 22, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Why are some titles in my playlists grayed out with a broken-circle icon to the left in iTunes ?

Why are some titles in my playlists grayed out with a broken-circle icon to the left in iTunes 12.1.0.50?

Did you ever get a response on this?
Thanks!

Import Tab grayed out in Aperture 3.1

Hi folks, need some help:
When I try to import a .jpg from SDHC or HDD into an existing project in my library, the import tab will gray out and is no more selectable. It is no more possible to switch to the library or to chose another button in the toolbar. I need to close the application and open again to work with.
Steps to Reproduce:
Import photos from SDHC-Card with integrated Card Reader or from HDD in a already existing Project, add some metadata-settings during import. Repeat the step several times and always import in a existing project and the the import-tab will gray out. So it is no more possible to move over the library.
I have tried:
- Repair permissions
- Aperture 3: Basic Troubleshooting
I am using:
- Mac OS X 10.6.4, current updates
- Aperture 3.1 clean install
- Latest Pro-Kit-Updates
Are there other people having the same GUI-bug like I do? Or is there maybe a solution? I am looking forward to your answers.
Sincerely'
Immo

Hi Folks
@spikeyjonze: A new local user account has no impact on this issue, it is still present. This steps also belongs to the Aperture 3: Basic Troubleshooting
@Adrian Wackernah: I also have the same issues, but this issue ain't so big for me. My current issue with a grayed out import tab seems to be much worse. But thanks a lot for your answer.
@Gary: I also work with shortcut cmd-i to enter or leave the import-window. But I have never tried with <esc>-key to leave to import-window, if the import tab grays out. I will give it a try when I reproduce the bug again.
I also have opened a case at Apple Care Pro Apps Support Europe. I have send them the System Profiler and a screen-recording of the issue. So I need to wait until Apple has done their troubleshooting and analysis.
Thanks for your answers. If you have any questions regarding this issue, do not hesitate to contact me.
Sincerely'
Immo

I am trying to import my bookmarks from IE and have read the instructions of how to do this, but the Import button under File is grayed out and will not let me import. Any ideas?

I am trying to import my bookmarks from IE and have read the instructions, but the Import button under File is grayed out and will not let me import. Any ideas?

* Make sure that you not run Firefox in [[Private Browsing]] mode
* In Private Browsing mode some menu items are disabled (grayed) and features like visited links are disabled and not showing
* You are in Private Browsing mode if you see "Tools > Stop Private Browsing", possibly grayed
See [[Private Browsing]]

In my contacts, I want to edit information. Some of this information is 'grayed out' and I am not able to delete it - any suggestions are greatly appreciated. Thanks

In my contacts, I want to edit information. Some of this information is 'grayed out' and I am not able to delete it - any suggestions are greatly appreciated. Thanks

For example: SusanX has quit her job and I still have her employment email address and phone number. All her other information is the same but I want to delete the information no long viable. When I go into edit mode the information is grayed out and is not deletable. I went to my iCloud and tried to delete it there, no luck.
I am thinking I might just have to delete the entire contact card and just start from scratch with only her current information. Seems like there should be a way to delete only parts of the information rather that resort to start a new contact card.
Thanks for your help. I appreciate you taking the time to advise me on this.
Mona

Message Mapping unavailable icons

Hi
I'm following a procedure to do a 1:n mapping without BPM http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/600b455f-01cd-2b10-0cab-a50e47a8f800?quicklink=index&overridelayout=true
This requires that one a message mapping is complete then it is saved as a message mapping template
On my system the icon is greyed out and unavailable. Actually all the icons are unavailabe
How can I access these buttons? Is there some config that needs to be implemented
thanks
Geoff

Hi
If you use PI 7.1 you should have java 6.0, PI 7.0 then 5.0. Juss work on this area. After updating your java dont forget to refresh cache.
Thnx
Pothana
Edited by: Pothana Yadav on Dec 1, 2010 12:06 PM

What is the Compatibility Tab grayed out for applications on some network shares, but not others?

I have a network share with an executable file located in it. If I browse to the share by UNC path from a Windows 7 pro workstation and go to the compatibility tab of the .exe, the options are grayed out.
I have another network share with an executable file located on it. This share and workstation are at a different location, unrelated to the first example. If I browse to the share by UNC path from a Windows 7 pro Workstation and go to the compatibility
tab of the .exe file, the options are not grayed out, and I can check or uncheck what ever I need to.
Both shares are located on a Server 2008 R2 system w/sp1. Both workstations are joined to the same domain as the server they are connecting to the UNC path on. Both shares have given the user connecting full access on the smb sharing and ntfs sharing.
Someone please tell me how to make the compatibility tab not grayed out. Here is a screen shot of the comapatibility tab of the .exe file from both shares:

Hi,
You can use
Troubleshoot compatibility to set the application to Compatibility Mode.
You can right-click the application’s shortcut and click Troubleshoot compatibility.
Please refer to the similar thread and the third-party article below:
Compatibility mode greyed out on exe that is on a mapped drive???
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/compatibility-mode-greyed-out-on-exe-that-is-on-a/03c93e47-3d66-485c-b28f-73d06bc793d5
Windows 7: Compatibility Mode
http://www.sevenforums.com/tutorials/316-compatibility-mode.html
In addition, since it is related to windows 7, you can ask in the forum below for further assistance if the issue persists:
Windows 7IT Pro Forums:
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
Best regards,
Susie
Thanks, but I read that link before I posted this. Even by running the compatibility wizard, you still can't edit the compatibility settings on Windows 7.

DW-CS3 / Split/Design View grayed out

In Dreamweaver CS3 (9.0.3453), when starting a new site, only
the CODE preview button is available - Split/Design views are
grayed out.
Also, everything in the submenu under View > Visual Aids
is also gray
Also, Refresh Design View is gray.
I'm a visual kinda guy, and haven't been able to find a fix
via Google.
NOTE: Everything was ok when first loading, then blew out.
Haven't been able to fix, and reinstalling doesn't work (I use Revo
Uninstaller to totally remove, so as to get a clean install -
nothing)
Many thanx for any help.
- LouisCat

I think it is probably the type of document you are creating,
for example if
you go to open a javascript or xml or css document, it goes
to code and
grays out the disign and split views. So you might be opening
the wrong type
of document.
Gary
"LouisCat" <[email protected]> wrote in
message
news:gbcucp$t6k$[email protected]..
> In Dreamweaver CS3 (9.0.3453), when starting a new site,
only the CODE
> preview
> button is available - Split/Design views are grayed out.
>
> Also, everything in the submenu under View > Visual
Aids is also gray
> Also, Refresh Design View is gray.
>
> I'm a visual kinda guy, and haven't been able to find a
fix via Google.
>
> NOTE: Everything was ok when first loading, then blew
out. Haven't been
> able
> to fix, and reinstalling doesn't work (I use Revo
Uninstaller to totally
> remove, so as to get a clean install - nothing)
>
> Many thanx for any help.
>
> - LouisCat
>

Properties tab "grayed out" in Acrobat 9 Pro

Hello-
I built a form using Live Cycle in 9 Pro for Windows. I want to have the form open as a "two up", so I assumed I should change this in the Properties menu. When I go to the Initial View tab, it is grayed out, and won't let me change anything. How do I get this tab to allow me to change it? Help!
Mike

Form created with LiveCycle Designer are XML forms in a PDF wrapper and many of the usual PDF properties are not available. This is like embedded rich media in a PDF. If you want to research this, Adobe and ISO have the PDF Reference manual available as a free download.

Why is the lyrics tab grayed out?

I have a Taylor Swift song I was going to add some lyrics to, but the tab is grayed out. Anyone know why? This song was imported from a CD.
Thanks

Yes, I tried it again by seeing the song in the main library as opposed to seeing it in a playlist. Again, the lyrics tab was grayed out. I was able to see the tab, however, when I did a "get info" for one of her music videos I have.

Infopath design form grayed out

I Have a user who is also the owner of three infopath files she can access design form under tools in two of the files but not the third it is grayed out how do i fix that?

Have you tried reopening InfoPath form in design mode? Not filler?

Edit Live Page View in New Tab Grayed Out

I've been looking forward to use using Dreamweaver CS5 to edit dynamic sites. One of the things I thought would really save time was being able to navigate to a dynamic page in live view and then edit it, instead of using File/Open, but when I browse to a page, the Edit the Live View Page in a New Tab is Grayed Out. Any help?

Hi,
According to your description, my understanding is that you needed to check out the document again when open a document which was checked out by yourself and received the error that the document was locked by yourself.
I tested the same scenario per your post, and I got the same results as you got.
I recommend to use the following method to call DispEX (utilizing open document add-on) which is directed to document relative URL instead of using the direct link:
<a onclick="return DispEx(this,event,'TRUE','FALSE','FALSE','SharePoint.OpenDocuments.3','1','SharePoint.OpenDocuments','','','','1','0','0','0x7fffffffffffffff')"
href="/site name/library name/file name.xlsx">Edit Document</a>
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Column icon in top bar grayed out

Created a doc from "basic" template, and can't get the columns icon in the format bar to work. Always grayed out. Anyone know what I should do? Thanks

Are you working in landscape or portrait mode?

Why are my header icons and toolbar buttons grayed out?

I purchased a used Macbook Pro from ebay. Appeared to be in good working order when I first started working with it, but I have updated from OS X 10.9.2 to 10.9.5 and downloaded Open Office program, set up my mail and went through the system preferences and personalized it. Also ran disk utilities. Then, this AM, when I restarted, the header icons on the right side are grayed out except for the battery %, the date and time and notifications. Also, in mail and safari, the toolbar buttons are blank (forward, back, print, mail, bookmarks, autofil, history and downloads). What happened? I went to the disk utility from the recovery partition (repaired disk and disk permissions). I also reset parameters. Don't know what to do next. Not sure if this is a hardware or software problem, but I am assuming it is software (OS X) related at this point. Please help.

Start up in Safe Mode.
http://support.apple.com/kb/PH14204?viewlocale=en_US
Giving away / Selling your Mac / Resetting the computer to the factory condition
http://support.apple.com/kb/HT5189
http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/

Message Mapping .. Some Icons under Design Tab grayed out

Similar Messages

Maybe you are looking for