Message Mappings - Object Toolbar is disabled (off)

Hi everyone,
I have installed the Process Integration 7.0, i am executing without problem.
But when I create a new Message Mapping, i have one problem.
In Message Mapping Editor, the "Object Toolbar" appears as disabled (off)
The buttons "Map Selected Fields and Substructures, Clear Mapping, Data-Flow Editor, Text Preview, Mapping Templates Used and Dependencies" are disabled (off) in screen.
Can anybody help me?

HI,
R u using java 1.4.2 version check ur java version form IR>Help>information
if its not java 1.4.2 then installl that from sun website.
chirag

Similar Messages

Message Maaping Editor - Buttons in Object Toolbar disabled

In Message Mapping Editor, Object Tool bar buttons are always disabled. I can not use functions like "Data Flow Editor", "Clear Mapping", "Text Preview" etc. The only functions enabled in Object Toolbar are "Select Message" and "Edit Java Sections". All the other functions are disabled. We are working in PI 7.0 SP12 environment. Please let me know if you know how to make these enabled. Thanks in Advance.
Srihari

Aamir,
Thanks for the reply. The Java Version that we are using is 1.6.0_03. Do you think that we need to change it back to 1.4.2?
Thanks,
Srihari

Object toolbar in message mapping inactive

Hi all,
I have an odd problem in the XI message mapping:
The object toolbar is inactive on the customers office computer.
The only buttons that can be used are "select message" and "edit java sections".
Everything's fine when I work via remote desktop (citrix, points to another computer than the office comp.)
Isn't that strange?! Could it be a wrong java release? What else??
The XI is XI 3.0, release NW04_20_REL, service pack 20, java version 1.6.0_03
Thanks in advance!
Karsten

Hi Chirag,
I got the system information from the help/ information menue in the repository.
Isn't the java version information there about the XI SERVER?
Anyway: It's the same java version on the client...
I'll try and if it works you get more points!!!
Thanks so far
Karsten

HT1212 My iphone is disabled after entering the wrong passcode.Followed the steps by connecting to itunes on my computer but still not helpful.Instead getting a message saying that i must turn off my icloud on iphone before i can resrore my device.

My iphone is disabled.Followed the steps in itunes after connecting to my computer but getting a message saying that i must turn off 'find my iphone'' on my device before i can restore it.Impossible for me to do that because i obviously have no access to my device.Can anyone help me with this problem please?

I think you should call via phone or perhaps take it to a phone store. I suggest taking your id, box packaging and other necessities such as the reciept of the phone being purchased.
Hope this helped

I have just upgraded to an iphone 4s and whenever I receive a message ,notification or the alarm goes off the camera flash goes of as well. Does anyone know how to disable this. No one else I know with this phone has this happen

I have just upgraded to an iphone 4s and whenever I receive a message ,notification or the alarm goes off the camera flash goes of as well. Does anyone know how to disable this. No one else I know with this phone has this happen

Settings>General>Accessibility>Hearing>LED Flash for Alerts>On/Off.

When I turn my Ipad3 on I get a message that states IPad is disabled.. connect to ITunes. I have done this and nothing happens. What else might I try?

When I turn my Ipad3 on I get a message that states IPad is disabled.. connect to ITunes. I have done this and nothing happens. What else might I try?

Force iPad into Recovery Mode
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times.

XI Configuration Design questions with multi-mapping message mapping object

Hello,
I'm having trouble designing a particular scenario for multi-mapping. Currently i'm working with a Vendor create and change. BPM is not being used.
This is what i need:
I need a CREMDM04 to turn into one or multiple ADRMAS/CREMAS IDocs and potentially a CLFMAS IDoc based on the values in the inbound CREMDM04 IDoc.
This is what i currently have:
A CREMDM04 inbound idoc is multi-mapped to a CREMDM03 (1...9999), another CREMDM03 (0...9999), and a CLFMAS01 (0...9999). At a minimum only the first CREMDM03 IDoc will be created and at a maximum all three will be created. The parameters on creating the second CREMDM03 IDoc and the CLFMAS01 IDoc are based on the values in the inbound CREMDM04 IDoc, whereas the first CREMDM03 IDoc will always be created and the values will just be converted/mapped from the inbound CREMDM04 IDoc. This multi-mapping is currently set-up via a graphical message map and works successfully in the test-tab of the mapping object. It has a main message and has sub-messages which are the IDocs. Im mapping the CREMDM04 to a CREMDM03 to then map it through an ABAP-Class and then to an XSL where the CREMDM03 inbound structure is expected to split into ADRMAS and CREMAS Outbound IDocs for Vendor Create/Change in the remote R/3 systems.
After the graphical map we have a necessary ABAP Class call that calls a BAPI to the remote system. This ABAP Class must come after the graphical map since the parameter for the BAPI is based on a converted value from the graphical multi-map.
After the ABAP Class call there is finally an XSL message split the CREMDM IDoc into an ADRMAS and CREMAS IDoc. There need to be two interface mappings (one per ADRMAS and CREMAS) since the ABAP classes and XSLs are specific to the ADRMAS and CREMAS.
The CLFMAS IDoc can go directly to the remote system, but since its within this one multi-map, Im not sure if is possible? Im not sure if it will fail once it tries entering the XSL mapping (this is the standard CREMDM message split offered from SAP).
There are three interface mapping scenarios I can think of, but cannot get to work:
CREMDM04 to ADRMAS02
CREMDM04 to CREMAS03
CREMDM04 to CLFMAS01
Currently I have the Interface Mapping structured as follows: (I cannot get this to activate as it appears it does not work)
Multi-Mapping ==> ABAP Class Call ==> Standard XSL Message Split
How should i design the interface mapping objects and the configuration objects for this scenario?
Any help is appreciated and I definitely will reward points (no need to include it in your response).

Hi,
I suggest you may use multiple steps interface mapping. It's composited with 3 message mappings as step by step.
Mapping 1: One to one mapping. For the output schema, use a composition schema which includes those 3 IDOCs you want.
Mappign 2: ABAP Mapping. I am not sure the ABAP class you mentioned is an ABAP mapping or not. If it does, That's ok. If not,
call that ABAP class in your ABAP mapping and do corresponding change for your message. Return back the same structure as output.
Mapping 3: One to multiple mapping to split the message.
So basically as interface mapping, it's one to multiple mapping. And internally, you have 3 steps to realize the mapping.
And as my experience, for both one to multiple message mapping & multiple steps interface mapping, it works well in my project. And
in ID, you have to configure it via "advance" function in receiver determination or interface determination.
Let me know if any confusion.
Thanks
Nick

HT1212 need to get the "iPad is disabled" off my iPad so I can use it

need to get the "iPad is disabled" off my iPad so I can use it

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Attachment list in Services for Object toolbar

Does anybody know if there is any user exit or BADI that I can use to filter certain file attachments in Attachment list of Services for Object toolbar.
For example, in transaction XK03 (Vendor display), Services for Object toolbar, you can see the Attachment list and it will display list of pc file attachments, however, we have a requirement to display only those that met certain criteria, is there any BADI or user exit for this?
Thanks in advance for your help.

you can use BADI
GOS_SRV_SELECT
for this.
Regards
Raja

Message-mappings: stored in which database-table?

Hello everybody,
I want to code some ABAP to check some message-mappings.
Does anybody know in which DB-tables the mapping including the mapping steps are stored?
Thanks a lot.
Regards Mario

Hi Muller,
Check these tables,
/SAPDMC/LSOMAP Field Mapping
/SAPTRX/SCAOTMAP 
/SAPTRX/SCCNDMAP /SAPTRX/SCEVTMAP 
/SAPTRX/SCFUNMAP /SAPTRX/SCSOMAP 
or Just say map in SE11 and u will get a list..
Regfards,
Sridhar

Problem with WCS, with an error message (Error: Object not found in device)

I have a problem with WCS, I can not open the window monitor / controllers with an error message (Error: Object not found in device) -> https: / / 10.19x.xxx.xx/webacs/switchDetailAction. do? ControllerID = 23735
by cons I can open the window configures / controllers -> https: / / 10.19x.xxx.xx/webacs/switchGeneralAction.do? command = detail & ControllerID = 23735
Is there a way to recreate the database or the object? thank you in advance

thank you for your help
Unfortunately, the command "refresh config from controller" does not solve the problem because we have a negative result
(in mode retain or in mode delete) with the following logs :
Log file wcs-0-0.log
10/19/10 12:07:16.333 ERROR[snmpmed] [23] Response VarBind missing for class InterfaceConfig attribute isInterfaceWired
Log file tomcat_localhost_access_log
10.197.xxx.xx - - [19/Oct/2010:12:07:16 +0000] "POST /webacs/switchListCommandAction.do HTTP/1.1" 200 47399
10.197.xxx.xx- - [19/Oct/2010:12:07:16 +0000] "GET /webacs/alarmSummaryAction.do?command=summary&dojo.preventCache=1287490037130 HTTP/1.1" 200 421

Not able to find Message mappings & Operations mapping in NWDS 7.31

Hi Experts,
I've downloaded NWDS-EXTSOA-7.3-EHP1-SP12-PAT0001 in which Data types, Messages types and Service interfaces are visible, but the Message Mappings and Message Interfaces. Let me know how to fix this issue.
Regards,
Farooq

Hi Vila,
When tried with NWDS having same SP level i can see & access MM & OM .
Thanks for your suggestion.
Regards,
Farooq

Type Messages and Objects turned from white to black in PDF

When I exported my Keynote presentation to a PDF the Type Messages and Objects turned from white to black. The display in ”Preview” is ok but in Acrobat PDF Viewer it looks black instead of white. Only happens on some slides. I could not find a reason why this happened. Seemed kind of random to me when it happened. But the error was reproducable unless I rebuild it with new silides.

Can you get the exact wording for that error? Is it can't mount iPod?
Also, make sure iTunes is up to date...
iTunes
Finally, make sure your iPod's battery is charged up.
btabz

Replace message payload object without remove queue table

hi,
i want to replace message payload object without remove queue table but i have got the "ORA-02303: cannot drop or replace a type with type or table dependents" error.
is there any way to replace message payload object without remove queue table?
Click to link below to find a demo which is explain the problem clearly
Replace message payload object without remove queue table
Regards.

Hi
I answered this in Re: Replace message payload object without remove queue table forum.
Cheers, APC

Edit message payload object without remove queue table

Hi, need ur help again,
Known that if we want to modify a message payload attribute (add,edit or delete), we will fail to do so if the message payload is used by existing AQ's queue table.
How to change the message payload object without remove the queue table?
Thanks!

Hi
I answered this in Re: Replace message payload object without remove queue table forum.
Cheers, APC

Message Mappings - Object Toolbar is disabled (off)

Similar Messages

Maybe you are looking for